Pasar al contenido principal

SISTEMAS LAB-ON-CHIP BASADOS EN TECNOLOGIA MICROELECTRONICA Y FOTONICA PARA EL CONTROL DE CULTIVOS CELULARES Y COMPORTAMIENTO NEURONAL

RTI2018-100773-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-Optic Phase Tuners Analysis and Design for Process Modules on a Silicon Nitride Platform

  • Alemany Server, Ruben
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Domínguez, Carlos
[EN] In this paper, we present a systematic design for manufacturing analysis for thermo-optic phase tuners, framed within the process modules available on a silicon nitride platform. Departing from an established technology platform, the heat distribution in various micro-structures was analyzed, both in steady and transient states, employing a 2D heat transfer model solved numerically. Multi-parametric simulations were performed on designs combining trenches and substrate undercut, by varying their position and dimensions. The simulation results were compared to a reference conventional fully-clad cross-section. Deep air-filled trenches are shown to reduce the power consumption up to 70%, alongside a thermal crosstalk phase shift reduction of more than one order of magnitude (0.045 pi rad/mm), at the expense of a slightly lower bandwidth (11.8 kHz). The design with trenches and substrate undercut lowers the power consumption up to 97%, decreases two orders of magnitude the crosstalk (0.006 pi rad/mm), at the cost of less than one order of magnitude in bandwidth (0.9 kHz). In the works, we selected three different heater materials (Cr/Au, Al, poly-silicon) offered by the fab and four different heater widths (2.5 to 7 mu m). Their combinations are related to performance, reliability and durability of the devices, strongly linked to temperature, current density, and Omegaic resistance. The different figures of merit defined, and the methodology followed, can be mimicked by future designers to take design decisions at bird's eye., Funding This research was funded by Ministry of Economy, Industry and Competitiveness grants numbers TEC2016-80385-P SINXPECT and PID2019-110877GB-I00 BHYSINPICS, Generalitat Valenciana grant number PROMETEO/2017/103, Ministry of Science, Innovation and Universities grant number MCIU-RTI2018-100773-B-C31 and by H2020 Marie Sklodowska Curie Innovative Training Network grant number MICROCOMB (GA 812818).
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Microanalytical flow system for the simultaneous determination of acetic acid and free sulfur dioxide in wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Ríos, Juan Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
Free sulfur dioxide and volatile acidity are parameters related to the quality of wines. Traditional methods for their determination are tedious, time consuming and require analysis in decentralized laboratories, therefore corrective actions cannot be applied on time. This may be more complex in aging wine cellars, where hundreds of individual barrels containing almost finished wines should be monitored. To achieve this aim, a portable microanalytical flow system for the simultaneous detection of free SO2 and acetic acid during the ageing of wines is proposed in this work. The miniaturized system is based on the use of a gas-diffusion membrane and a pH-ISFET, and can be easily installed in barrels. The system was optimized in the range of 5–60 mg L−1 and 0.15–1.40 g L−1 for SO2 and acetic acid, respectively. It was validated with different sets of wine samples by comparing the results with standard methods, demonstrating a good agreement between methods., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Compact analytical flow system for the simultaneous determination of L-lactic and L-malic in red wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
  • Fernández-Sánchez, César
During the malolactic fermentation of red wines, L-malic acid is mainly converted to L-lactic acid. Both acids should be precisely measured during the entire process to guarantee the quality of the final wine, thus making real-time monitoring approaches of great importance in the winemaking industry. Traditional analytical methods based on laboratory procedures are currently applied and cannot be deployed on-site. In this work, we report on the design and development of a bi-parametric compact analytical flow system integrating two electrochemical biosensors that could be potentially applied in this scenario. The developed flow-system will allow for the first time the simultaneous measurement of both acids in real scenarios at the real-time and in remote way. Miniaturized thin-film platinum four-electrode chips are fabricated on silicon substrates by standard photolithographic techniques and further implemented in a polymeric fluidic structure. This includes a 15 µL flow cell together with the required fluidic channels for sample and reagent fluid management. The four-electrode chip includes counter and pseudo-reference electrodes together with two working electrodes. These are sequentially modified with electropolymerized polypyrrole membranes that entrap the specific receptors for selectively detecting both target analytes. The analytical performance of both biosensors is studied by chronoamperometry, showing a linear range from 5 × 10−6 to 1 × 10−4 M (LOD of 3.2 ± 0.3 × 10−6 M) and from 1 × 10−7 to 1 × 10−6 M (LOD of 6.7 ± 0.2 × 10−8 M) for the L-lactate and the L-malate, respectively. Both biosensors show long-term stability, retaining more than the 90% of their initial sensitivity after more than 30 days, this being a prerequisite for monitoring the whole process of the malolactic fermentation of the red wines (time between 20 and 40 days). The flow system performance is assessed with several wine samples collected during the malolactic fermentation process of three red wines, showing an excellent agreement with the results obtained with the standard method., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fiber-Optic-Based System for High-Resolution Monitoring of Stretch in Excised Tissues

  • Velarte, Antonio
  • Otin, Aranzazu
  • Giménez-Gómez, Pablo
  • Muñoz-Berbel, Xavier
  • Pueyo, Esther
Cardiovascular diseases cause a high number of deaths nowadays. To improve these statistics, new strategies to better understand the electrical and mechanical abnormalities underlying them are urgently required. This study focuses on the development of a sensor to measure tissue stretch in excised tissues, enabling improved knowledge of biomechanical properties and allowing greater control in real time. A system made of biocompatible materials is described, which is based on two cantilevered platforms that integrate an optical fiber inside them to quantify the amount of stretch the tissues are exposed to with a precision of μ m. The operating principle of the sensor is based on the variation of the optical path with the movement of the platforms onto which the samples are fixed. The conducted tests highlight that this system, based on a simple topology and technology, is capable of achieving the desired purpose (a resolution of ∼1 μ m), enabling the tissue to be bathed in any medium within the system., This work was funded by projects PID2019-105674RB-I00, RTI2018-100773-B-C31, PID2021-127653NB-C21, PID2022-140556OB-I00 and TED2021-130459B-I00 by Ministerio de Ciencia e Innovación, ERC grant 638284 by European Research Council and projects LMP94_21 and BSICoS T39_23R by European Social Fund (EU) and Aragón Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile and Low-Cost Fabrication of SiO2-Covered Au Nanoislands for Combined Plasmonic Enhanced Fluorescence Microscopy and SERS

  • Vidal García-Arias, Alejandro
  • Molina-Prados, Sergio
  • Cros, Ana
  • Garro, Núria
  • Pérez-Martínez, Manuel
  • Álvaro Bruna, Raquel
  • Mata, Gadea
  • Megías, Diego
  • Postigo, Pablo Aitor
An easy and low-cost way to fabricate monometallic Au nanoislands for plasmonic enhanced spectroscopy is presented. The method is based on direct thermal evaporation of Au on glass substrates to form nanoislands, with thicknesses between 2 and 15 nm, which are subsequently covered by a thin layer of silicon dioxide. We have used HR-SEM and AFM to characterize the nanoislands, and their optical transmission reveals strong plasmon resonances in the visible. The plasmonic performance of the fabricated substrates has been tested in fluorescence and Raman scattering measurements of two probe materials. Enhancement factors up to 1.8 and 9×104 are reported for confocal fluorescence and Raman microscopies, respectively, which are comparable to others obtained by more elaborated fabrication procedures., The results were obtained through funding from Spanish Ministerio de Ciencia, Innovación y Universidades (projects RTI2018-100773-B-C32 and RTC2019-007093-8), Comunidad de Madrid (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). Additional financial support is also acknowledged: Spanish MICINN/AEI under projects PID2019-104272RB-C53/AEI/10.13039/501100011033, PID2019-110927RB-I00/AEI/10.13039/501100011033, and PID2019-109641RB-I00; Generalitat Valenciana under project PROMETEO/2020/029; and the Advanced Materials programme, supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana; Grant MFA/2022/007., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A self-calibrating and multiplexed electrochemical lab-on-a-chip for cell culture analysis and high-resolution imaging

  • Giménez-Gómez, Pablo
  • Rodríguez-Rodríguez, Rosalía
  • Ríos, Juan Manuel
  • Pérez-Montero, Marta
  • González, Estrella
  • Gutiérrez-Capitán, Manuel
  • Plaza, José Antonio
  • Muñoz-Berbel, Xavier
  • Jiménez-Jorquera, Cecilia
In vitro analysis requires cell proliferation in conditions close to physiological ones. Lab-on-a-chip (LoC) devices simplify, miniaturize and automate traditional protocols, with the advantages of being less expensive and faster due to their shorter diffusion distances. The main limitation of current LoCs is still the control of the culture conditions. Most LoCs employ off-chip equipment to determine cell culture activity, which confers limited monitoring capacity. The few systems integrating transducers on-chip present important functional problems mostly associated with the attachment of biomolecules to the transducer surface (i.e., biofouling) and the impossibility of re-calibrating the sensors during cell culturing. This limitation is addressed in the present LoC containing a network of micro-channels and micro-chambers, which allows (i) cell seeding and cultivation, avoiding biofouling risk, (ii) multiplexed analysis of cell culture, reactivation and recalibration of the (bio)sensors without compromising cell viability, (iii) cell imaging and (iv) reference electrode compartmentalization to guarantee stability. The activity of the culture is monitored with four independent electrochemical micro-electrodes for glucose, hydrogen peroxide, conductivity and oxidation reduction potential. Electrochemical analysis is complemented with high-resolution confocal microscopy analysis. This paper demonstrates the suitability of the current configuration for cell culture monitoring and future applications in drug screening or organ-on-a-chip development., This work was supported by the Spanish R & D National Program (MEC Project TEC2014-54449-C3-1-R and RTI2018-100773-B-C31)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microanalytical flow system for the simultaneous determination of acetic acid and free sulfur dioxide in wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Ríos, Juan Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
Free sulfur dioxide and volatile acidity are parameters related to the quality of wines. Traditional methods for their determination are tedious, time consuming and require analysis in decentralized laboratories, therefore corrective actions cannot be applied on time. This may be more complex in aging wine cellars, where hundreds of individual barrels containing almost finished wines should be monitored. To achieve this aim, a portable microanalytical flow system for the simultaneous detection of free SO2 and acetic acid during the ageing of wines is proposed in this work. The miniaturized system is based on the use of a gas-diffusion membrane and a pH-ISFET, and can be easily installed in barrels. The system was optimized in the range of 5-60 mg L-1 and 0.15-1.40 g L-1 for SO2 and acetic acid, respectively. It was validated with different sets of wine samples by comparing the results with standard methods, demonstrating a good agreement between methods., We acknowledge funding from MINECO, Spain, through the Project RTI2018-100773-B-C31 and from Sapere Corporation (California, USA). We also acknowledge the BioSystems Company for providing us stable home-made solutions to carry out the long-terms measurements. This work used the Spanish ICTS Network MICRONANOFABS and was partly supported by the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reusable Colorimetric Biosensors on Sustainable Silk-Based Platforms

  • Márquez, Augusto
  • Santiago, Sara
  • Dos Santos, Molíria Vieira
  • Aznar-Cervantes, Salvador D
  • Domínguez, Carlos
  • Omenetto, Fiorenzo G
  • Guirado, Gonzalo
  • Muñoz-Berbel, Xavier
In biosensor development, silk fibroin is advantageous for providing transparent, flexible, chemically/mechanically stable, biocompatible, and sustainable substrates, where the biorecognition element remains functional for long time periods. These properties are employed here in the production of point-of-care biosensors for resource-limited regions, which are able to display glucose levels without the need for external instrumentation. These biosensors are produced by photopatterning silk films doped with the enzymes glucose oxidase and peroxidase and photoelectrochromic molecules from the dithienylethene family acting as colorimetric mediators of the enzymatic reaction. The photopatterning results from the photoisomerization of dithienylethene molecules in the silk film from its initial uncolored opened form to its pink closed one. The photoisomerization is dose-dependent, and colored patterns with increasing color intensities are obtained by increasing either the irradiation time or the light intensity. In the presence of glucose, the enzymatic cascade reaction is activated, and peroxidase selectively returns closed dithienylethene molecules to their initial uncolored state. Color disappearance in the silk film is proportional to glucose concentration and used to distinguish between hypoglycemic (below 4 mM), normoglycemic (4-6 mM), and hyperglycemic levels (above 6 mM) by visual inspection. After the measurement, the biosensor can be regenerated by irradiation with UV light, enabling up to five measurement cycles. The coupling of peroxidase activity to other oxidoreductases opens the possibility to produce long-life reusable smart biosensors for other analytes such as lactate, cholesterol, or ethanol., This work was supported by the Spanish R&D National Program (MEC Project TEC2014-54449-C3-1-R, RTI2018-100773-B-C31 and PID2021-127653NB-C21). Moliria Vieira dos Santos thanks FAPESP for a postdoctoral fellowship, grants #2016/11591-8 and #2018/11039-9. A.M. is also grateful to the MICINN for the award of a research studentship from the FPI program (BES-2015-072946). The authors also thank the Ministerio de Ciencia e Innovación of Spain for financial support through projects PID2019-106171RB-I00, PID2022-1412930B-I00, and AGAUR (Generalitat de Catalunya, 2021 SGR 00052). Dr. Salvador Aznar acknowledges partial financial support (60%) from the European Commission ERDF/FEDER Operational Programme of Murcia (2021-2027), Project No. 50463 “Development of sustainable models of agricultural, livestock, and aquaculture production” (subproject: Innovation in the field of sericulture: New materials, biomaterials, and extracts of biomedical interest)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compact analytical flow system for the simultaneous determination of L-lactic and L-malic in red wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
  • Fernández Sánchez, César
During the malolactic fermentation of red wines, L-malic acid is mainly converted to L-lactic acid. Both acids should be precisely measured during the entire process to guarantee the quality of the final wine, thus making real-time monitoring approaches of great importance in the winemaking industry. Traditional analytical methods based on laboratory procedures are currently applied and cannot be deployed on-site. In this work, we report on the design and development of a bi-parametric compact analytical flow system integrating two electrochemical biosensors that could be potentially applied in this scenario. The developed flow-system will allow for the first time the simultaneous measurement of both acids in real scenarios at the real-time and in remote way. Miniaturized thin-film platinum four-electrode chips are fabricated on silicon substrates by standard photolithographic techniques and further implemented in a polymeric fluidic structure. This includes a 15 µL flow cell together with the required fluidic channels for sample and reagent fluid management. The four-electrode chip includes counter and pseudo-reference electrodes together with two working electrodes. These are sequentially modified with electropolymerized polypyrrole membranes that entrap the specific receptors for selectively detecting both target analytes. The analytical performance of both biosensors is studied by chronoamperometry, showing a linear range from 5 × 10-6 to 1 × 10-4 M (LOD of 3.2 ± 0.3 × 10-6 M) and from 1 × 10-7 to 1 × 10-6 M (LOD of 6.7 ± 0.2 × 10-8 M) for the L-lactate and the L-malate, respectively. Both biosensors show long-term stability, retaining more than the 90% of their initial sensitivity after more than 30 days, this being a prerequisite for monitoring the whole process of the malolactic fermentation of the red wines (time between 20 and 40 days). The flow system performance is assessed with several wine samples collected during the malolactic fermentation process of three red wines, showing an excellent agreement with the results obtained with the standard method., Funding text 1 We acknowledge the group of Dr. Iluminada Gallardo (Chemistry Department, Universitat Autònoma de Barcelona, Spain) for kindly helping us with the polypyrrole distillation process. This work used the Spanish ICTS Network MICRONANOFABS and was partly supported by the Spanish Ministry of Economy, Industry and Competitiveness. Funding text 2 P.G.-G. carried out the optimization and the validation of the bi-parametric compact analytical flow system with wine samples. F.C. and A.P.-P. carried out the wine samples selection and collection, as well as the analytical measurements with standard enzymatic methods. P.G.-G., M.G.-C., C.F.-S. and C.J.-J. managed and coordinated the execution of the research activity. All the authors prepared the draft. P.G.-G. and C.F.-S revised and edited the manuscript. C.J.-J. and C.F.-S. obtained the financial support to carry out the projects associated with the manuscript., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fiber-Optic-Based System for High-Resolution Monitoring of Stretch in Excised Tissues

  • Velarte, Antonio
  • Otin, Aranzazu
  • Giménez-Gómez, Pablo
  • Muñoz-Berbel, Xavier
  • Pueyo, Esther
Cardiovascular diseases cause a high number of deaths nowadays. To improve these statistics, new strategies to better understand the electrical and mechanical abnormalities underlying them are urgently required. This study focuses on the development of a sensor to measure tissue stretch in excised tissues, enabling improved knowledge of biomechanical properties and allowing greater control in real time. A system made of biocompatible materials is described, which is based on two cantilevered platforms that integrate an optical fiber inside them to quantify the amount of stretch the tissues are exposed to with a precision of μm. The operating principle of the sensor is based on the variation of the optical path with the movement of the platforms onto which the samples are fixed. The conducted tests highlight that this system, based on a simple topology and technology, is capable of achieving the desired purpose (a resolution of ∼1 μm), enabling the tissue to be bathed in any medium within the system.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microanalytical flow system for the simultaneous determination of acetic acid and free sulfur dioxide in wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Ríos, Juan Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
Free sulfur dioxide and volatile acidity are parameters related to the quality of wines. Traditional methods for their determination are tedious, time consuming and require analysis in decentralized laboratories, therefore corrective actions cannot be applied on time. This may be more complex in aging wine cellars, where hundreds of individual barrels containing almost finished wines should be monitored. To achieve this aim, a portable microanalytical flow system for the simultaneous detection of free SO2 and acetic acid during the ageing of wines is proposed in this work. The miniaturized system is based on the use of a gas-diffusion membrane and a pH-ISFET, and can be easily installed in barrels. The system was optimized in the range of 5–60 mg L−1 and 0.15–1.40 g L−1 for SO2 and acetic acid, respectively. It was validated with different sets of wine samples by comparing the results with standard methods, demonstrating a good agreement between methods., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compact analytical flow system for the simultaneous determination of L-lactic and L-malic in red wines

  • Giménez-Gómez, Pablo
  • Gutiérrez-Capitán, Manuel
  • Capdevila, Fina
  • Puig-Pujol, Anna
  • Jiménez-Jorquera, Cecilia
  • Fernández-Sánchez, César
During the malolactic fermentation of red wines, L-malic acid is mainly converted to L-lactic acid. Both acids should be precisely measured during the entire process to guarantee the quality of the final wine, thus making real-time monitoring approaches of great importance in the winemaking industry. Traditional analytical methods based on laboratory procedures are currently applied and cannot be deployed on-site. In this work, we report on the design and development of a bi-parametric compact analytical flow system integrating two electrochemical biosensors that could be potentially applied in this scenario. The developed flow-system will allow for the first time the simultaneous measurement of both acids in real scenarios at the real-time and in remote way. Miniaturized thin-film platinum four-electrode chips are fabricated on silicon substrates by standard photolithographic techniques and further implemented in a polymeric fluidic structure. This includes a 15 µL flow cell together with the required fluidic channels for sample and reagent fluid management. The four-electrode chip includes counter and pseudo-reference electrodes together with two working electrodes. These are sequentially modified with electropolymerized polypyrrole membranes that entrap the specific receptors for selectively detecting both target analytes. The analytical performance of both biosensors is studied by chronoamperometry, showing a linear range from 5 × 10−6 to 1 × 10−4 M (LOD of 3.2 ± 0.3 × 10−6 M) and from 1 × 10−7 to 1 × 10−6 M (LOD of 6.7 ± 0.2 × 10−8 M) for the L-lactate and the L-malate, respectively. Both biosensors show long-term stability, retaining more than the 90% of their initial sensitivity after more than 30 days, this being a prerequisite for monitoring the whole process of the malolactic fermentation of the red wines (time between 20 and 40 days). The flow system performance is assessed with several wine samples collected during the malolactic fermentation process of three red wines, showing an excellent agreement with the results obtained with the standard method., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reusable Colorimetric Biosensors on Sustainable Silk-Based Platforms

  • Márquez, Augusto|||0000-0003-3074-7941
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Santos, Molíria V.|||0000-0003-0569-2424
  • Aznar-Cervantes, Salvador|||0000-0001-9809-7215
  • Dominguez, Carlos|||0000-0002-5972-7285
  • Omenetto, Fiorenzo|||0000-0002-0327-853X
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
In biosensor development, silk fibroin is advantageous for providing transparent, flexible, chemically/mechanically stable, biocompatible, and sustainable substrates, where the biorecognition element remains functional for long time periods. These properties are employed here in the production of point-of-care biosensors for resource-limited regions, which are able to display glucose levels without the need for external instrumentation. These biosensors are produced by photopatterning silk films doped with the enzymes glucose oxidase and peroxidase and photoelectrochromic molecules from the dithienylethene family acting as colorimetric mediators of the enzymatic reaction. The photopatterning results from the photoisomerization of dithienylethene molecules in the silk film from its initial uncolored opened form to its pink closed one. The photoisomerization is dose-dependent, and colored patterns with increasing color intensities are obtained by increasing either the irradiation time or the light intensity. In the presence of glucose, the enzymatic cascade reaction is activated, and peroxidase selectively returns closed dithienylethene molecules to their initial uncolored state. Color disappearance in the silk film is proportional to glucose concentration and used to distinguish between hypoglycemic (below 4 mM), normoglycemic (4-6 mM), and hyperglycemic levels (above 6 mM) by visual inspection. After the measurement, the biosensor can be regenerated by irradiation with UV light, enabling up to five measurement cycles. The coupling of peroxidase activity to other oxidoreductases opens the possibility to produce long-life reusable smart biosensors for other analytes such as lactate, cholesterol, or ethanol.