Pasar al contenido principal

NUEVAS TECNOLOGIAS FOTO- Y ELECTROQUIMICAS PARA LA REDUCCION DE EMISIONES, LA CAPTURA Y LA UTILIZACION DE CO2

PID2019-106171RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New opto-electro-mechanical sensor for two-dimensions dosimetry based on radiochromic films

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Karkour, Nabil|||0000-0002-1153-7706
  • Alaphilippe, V.
  • Botero, J. P.
  • Jiménez Farrerons, Marcel|||0000-0002-6602-7332
  • Linget, D.
  • Gibelin, L.
  • Le Ven, V.
  • Marquet, A.
  • Mellouh, S.
  • Josson, E.
  • Benassou, W.
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Guardiola, C.
This work presents the validation of a new Opto‒Electro-Mechanical (MOEM) system consisting of a matrix of photodetectors for two-dimensional dosimetry evaluation with radiochromic films. The proposed system is based on a 5 × 10 matrix of photodetectors controlled by both in-house electronic circuit and graphical user interface, which enables optical measurements directly. We present the first tests performed in an X-ray machine and 137 Cs source with that array by using Gafchromic EBT3 films. We obtained similar results than with a standard method (e.g. flat-bed scanner). Results were compared with Monte Carlo simulations and very good agreement was found. Results show the feasibility of using this system for dose evaluations. To the best of our knowledge, this is the first MOEM sensor for radiotherapy. Further developments are ongoing to create an advanced 16 × 16 LDRs system covering 1.6 cm × 1.6 cm with a 1 mm of spatial resolution. We point to develop a portable dosimetry tool delivering dose maps in real time to improve the clinical application of radiochromic films.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

First Tests of an Opto-Electro-Mechanical System for 2D Dose Analysis in Low Energy Proton Irradiated Films

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Karkour, Nabil|||0000-0002-1153-7706
  • Alaphilippe, V.
  • Crepin, D.
  • Jiménez-Ramos, M.C.|||0000-0001-7109-1040
  • García López, Javier|||0000-0003-4107-4383
  • Espino, J.M.
  • Pascual-Alvarez, D.
  • Riera-Llobet, Carla|||0000-0002-9037-1539
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Gibelin, L.
  • Linget, D.
  • Guardiola, C.
This work presents a 2D dosimetry analysis with a new micro-opto-electro-mechanical system of radiochromic films irradiated with a low energy proton beam. The new system is based on a 5 X 10 matrix of photodetectors controlled by both an in-house electronic circuit and a graphical user interface, which allows direct optical density measurements. We have investigated the performance of this 2D readout system using Gafchromic EBT3 films. The results were compared with those obtained using a standard analysis method based on a flat-bed scanner, and the results showed the feasibility of this system for 2D dose map evaluation. To the best of the authors' knowledge, this is the first time that a two-dimensional micro-opto-electro-mechanical system has been used to analyze radiochromic films irradiated with low-energy protons. We intend to develop a portable 2D dosimetry tool that provides dose maps to speed up the reading of radiochromic films in radiotherapy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Green Electrochromic Film Formation via Phenylcarbazole Polymerization in Ionic Liquids

  • Gascó, Carolina|||0000-0003-4435-8306
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Guirado, Gonzalo|||0000-0003-2128-7007
The scale-up of electrochromic devices (ECD) from laboratory research to mass production is still challenging due to the use of toxic organic solvents and electrolytes, as well as performance losses when transferred to solid substrates specially flexible ones. Here, we present a green approach for the electropolymerization of polycarbazoles on flexible substrates, using two distinct monomers: 4-(9H-carbazol-9-yl)phenol and 4-(3-methoxy-9H-carbazol-9-yl)phenol. 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-TFSI) ionic liquid (IL) is used as a reusable electrolyte medium, which not only minimizes environmental impact but also enables efficient modulation of the electrochromic performance. The resulting electroactive films showed promising coverage (2.24·10-9 and 2.5·10-8 mol cm-2, respectively), and efficient electrochromic features (31 and 17 cm2 C-1, respectively), demonstrating their potential for improving sustainable fabrication protocols and paving the way toward practical, environmentally friendly ECD applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid materials with near‐infrared‐induced fluorescence modulation

  • Otaegui, Jaume R.
  • Rubirola, Pau
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Solid molecular materials modulating their luminescent properties upon irradiation are typically based on photochromic dyes. Despite these are potentially interesting for applications such as anticounterfeiting, bioimaging, optical data storage, and writable/erasable devices, key features are preventing their use in marketable products: the lack of straightforward strategies to obtain near infrared (NIR) radiation‐responding photochromic dyes and the dramatic response modification these molecules suffer in solids. Herein a photochrome‐free approach is reported to achieve solid materials whose luminescence modulation is induced by NIR radiation. This strategy is based on the capacity of phase change materials (PCMs) to modify the emission properties of fluorescent dyes upon photothermally induced interconversion between their solid and liquid states. The preparation of several NIR‐responsive thermofluorochromic materials of high fatigue resistance and nondestructive readout is illustrated and this approach is extended to different commercially available dyes, taking advantage of distinct fluorescence modulation mechanisms, providing, thus, color tunability. The modulation response is straightforwardly tuned by simply varying the irradiation power density, the gold nanoshell concentration, and/or the PCM type. This tunability allows to accomplish NIR‐activated multistate thermofluorochromic materials and fast/slow/irreversible responses in NIR‐writings/drawings of good spatial resolution, which can be of interest for barcodings, anticounterfeiting technologies and (re)writable devices., This work was supported by the Spanish Research Agency and European Regional Development Funds (PID2019‐106171RB‐I00 and RTI2018‐098027‐B‐C21 projects) and Generalitat de Catalunya (2017 SGR00465 project). ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme (Generalitat de Catalunya) and acknowledges support from the Severo Ochoa programme (AEI, SEV‐2017‐0706). J.R.O. thanks to Agencia de Gestión de Ayudas Universitarias y de Investigación (AGAUR) for his predoctoral FI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical tools to disclose the electrochemical reduction mechanism of CO2 in aprotic solvents and ionic liquids

  • Mena, Silvia
  • Ribas, Esteve
  • Richart, Clara
  • Gallardo, Iluminada
  • Faraudo, Jordi
  • Shaw, Scott K.
  • Guirado, Gonzalo
Carbon dioxide (CO2) plays a key role in controlling the temperature of the Earth. But the increase in the concentration of CO2 in the atmosphere brings with it a series of consequences, originating several environmental problems. The use of electrochemical, spectroscopic and molecular dynamics techniques are useful toolkits to valorize carbon dioxide, and to know the reduction mechanism as a function of CO2 concentration, the cathode nature, and the electrolyte. This manuscript will be mainly centered in the use of ionic liquids (IL) for efficient CO2 capture and valorization into different valuable products thanks to the CO2 electrochemical reduction. In this sense, spectroelectrochemistry based on cyclic voltammetry coupled with Polarization Modulation-Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) and Infrared Reflection-Absorption Spectroscopy (IRRAS) appear to be an efficient instrument to follow the CO2 reactivity in imidazolium ionic liquids. Finally, we present molecular dynamics paired with cyclic voltammetry in order to calculate the diffusion coefficient of CO2 and the number of electrons involved in its reduction process, respectively. Therefore, the current research opens the door to the use of theoretical-experimental approaches altogether to determine how is the CO2 reduction mechanism. The CO2 reduction products in function of the solvent and nature of the cathode is suggested, proving that the product obtained from the electrochemical reduction of CO2 depends on the electrode material and the solvent., The authors thank the Ministerio de Ciencia e Innovación of Spain for financial support though the projects CTQ 2015-65439-R and PID2019-106171RB-I00. SM acknowledges the Autonomous University of Barcelona for her predoctoral PIF grant. SKS thanks the University of Iowa Department of Chemistry for support of this project. The invitation by the E3TECH Spanish Network of Excellence (CTQ2017-90659-REDT (MEIC/AEI)) is also kindly acknowledged. JF acknowledges CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer and financial support from MINECO Severo Ochoa programme, Grant CEX2019-000917-S. We thank Dr Piotr Kubisiak for sharing his datafiles with us., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoresponsive multicolor-emissive materials based on solid lipid nanoparticles

  • Otaegui, Jaume R.
  • Latterini, Loredana
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Despite the recent advances in the field of thermofluorochromism, the fabrication of thermoresponsive multicolor-emissive materials in a simple, low-cost and versatile manner still remains a challenge. Herein we accomplish this goal by expanding the concept of matrix-induced thermofluorochromism, where a sudden two-state variation of dyes' emission is promoted by the solid-liquid transition of a surrounding phase change material (e.g., paraffins). We demonstrate that this behavior can be transferred to the nanoscale by the synthesis of dye-loaded solid lipid nanoparticles, different types of which can then be combined into a single platform to obtain multicolor thermofluorochromism using a single type of emitter. Because of the reduced dimensions of these particles, they can be utilized to prepare transparent nanocomposites and inkjet-printed patterns showing complex thermoresponsive luminescence signals and applications ranging from smart displays to thermal sensing and high-security anti-counterfeiting., This work was supported by MINECO/FEDER (PID2019-106171RB-I00 and RTI2018-098027-B-C21 projects) and Generalitat de Catalunya (2017 SGR00465 project). J. R. O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. ICN2 acknowledges support from the Severo Ochoa programme (MINECO, SEV-2017-0706) and the CERCA programme (Generalitat de Catalunya). L. L. is grateful to Ministero dell’Istruzione, dell’Università e della Ricerca (MIUR) for the support through the program “Dipartimenti di Eccellenza 2018–2022” (grant AMIS) and acknowledges CSGI (Consorzio Interuniversitario per lo Sviluppo dei Sistemi a Grande Interfase, Research Center for Colloid and Surface Science) for the support. We acknowledge the Research Support Division–Instrumentation Unit of ICN2 for the help in the instrumentation design.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimodal Fluorescence Switching Materials: One Dye to Have Them All

  • Otaegui, Jaume R.
  • Carrascull-Marín, Aleix
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Off/on, on/off, and on/on fluorescence switching systems find application in a variety of areas, for each of which a particular dye or dye-switch tether must be specifically designed and synthesized. Herein it is demonstrated that such tight requirement can be avoided by using easily prepared mixtures of readily available emitters and phase change materials (PCMs). By proper selection of the PCM and, if needed, additives, thermo- and photothermoresponsive materials showing all classes of emission switching modes can be prepared from a single dye and without chemical modifications. This strategy can be generalized to distinct emitters and, thanks to the facile and versatile printability of dye–PCM mixtures, it can be used for the fabrication of fluorescent patterns showing complex (photo)thermal responses with direct applicability in sensing and anti-counterfeiting., This work was supported by grant RTI2018-098027-B-C21 and PID2019-106171RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF – “A way of making Europe”. The ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa “Centers of Excellence” program, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. U.A.B. thanks the support from Generalitat de Catalunya (2017 SGR00465 project). J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days., This work was supported by MINECO/FEDER (RTI2018-098027-B-C21, PID2019-106171RB-100 and PDC2022-133368-I00 projects) and Generalitat de Catalunya (2017 SGR00465 and 2021 PROD 00190 projects). J. R. O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. ICN2 acknowledges support from the Severo Ochoa program (MINECO, SEV-2017-0706) and the CERCA program (Generalitat de Catalunya)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data associated to the article "Multistimuli-responsive smart windows based on paraffin-polymer composites"

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Description of methods used for collection-generation of data: Refractive index measurements: data was obtained using an Abbe refractometer NAR-1T. The temperature was controled with a recirculating thermobath system. 1-bromonaphtalene was used as inmersion oil for PVA film. Transmittance measurements: data was obtained using a Jasco U-770 or an Agilent Cary 60 spectrophotometers. The temperature of the samples was controlled with a Peltier thermostated cell holder, with an external air heating gun (output air temperature of 55 °C), or with a custom-made holder (Sapphire 360) in which the sample of interest was kept between two sapphire windows attached to two cupper sheets, which were connected to a temperature controller. Differential scanning calorimetry measurements: data was obtained using a TA-instruments Q20. A temperature ramp rate of 10 °C min-1 was used for all the samples. Sample irradiation: Irradiation was performed with: (a) a cw laser (irradiation wavelength 830 nm), whose power was modulated using different neutral density filtersand measured with a potentiometer; (b) a solar simulator (100 mW cm-2) placed at 23 cm from the tested material, whose irradiation power was measured with a potenciometer; or (c) sunlight. Temperature measurements on samples: Temperatures were measured with: (a) a thermocouple; or (b)a thermal IR probe. Voltage application to samples: The voltage was applied by means of a power supplier and both the voltage and the current were displaid in the power supplier screen. Electron microscopy data: TEM images were acquired with a TEM JEM-1400 (120 kV) microscope. SEM images were acquired with a FEI Quanta 650 ESEM microscope applying a 5 kV voltage. Size histograms were obtained from the microscopy images using ImageJ software. Stress-strain curves: The tensile test of the films was conducted by means of an Instron 3366 instrument at a speed of 25 mm min-1 and the specimens used had a thickness of 0.2 mm and a width of 15 mm., The dataset shows the experimental data provided in the main text and supporting information of the article "Multistimuli-responsive smart windows based on paraffin-polymer composites": thermal variation of refractive index, thermal and time variation of transmission spectra, electron microscopy images, differential scanning calorymetry thermograms, variation of transmission spectra with light irradiation and voltage application, temperature variation into house models upon sunlight irradiation., Funding sources: Funding agency: MINECO/FEDER. Project number: (RTI2018-098027-B-C21, PID2019-106171RB-I00 and PDC2022-133368-I00). Funding agency: Generalitat de Catalunya. Project number: 2017 SGR00465 and 2021 PROD 00190, Fig 2 Folder, Fig 3 folder, Fig 5 folder, Fig 6 folder, Fig 7 folder, Supporting information folder, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New opto-electro-mechanical sensor for two-dimensions dosimetry based on radiochromic films

  • Mena, Silvia
  • Karkour, Nabil
  • Alaphilippe, V
  • Botero, J P
  • Jiménez, Marcio Alfonso
  • Linget, Denis
  • Gibelin, L
  • Le Ven, V
  • Marquet, A
  • Mellouh, S
  • Josson, E
  • Benassou, W
  • Muñoz-Berbel, Xavier
  • Guirado, Gonzalo
  • Guardiola Salmerón, Consuelo
This work presents the validation of a new Opto‒Electro-Mechanical (MOEM) system consisting of a matrix of photodetectors for two-dimensional dosimetry evaluation with radiochromic films. The proposed system is based on a 5 × 10 matrix of photodetectors controlled by both in-house electronic circuit and graphical user interface, which enables optical measurements directly. We present the first tests performed in an X-ray machine and 137Cs source with that array by using Gafchromic EBT3 films. We obtained similar results than with a standard method (e.g. flat-bed scanner). Results were compared with Monte Carlo simulations and very good agreement was found. Results show the feasibility of using this system for dose evaluations. To the best of our knowledge, this is the first MOEM sensor for radiotherapy. Further developments are ongoing to create an advanced 16 × 16 LDRs system covering 1.6 cm × 1.6 cm with a 1 mm of spatial resolution. We point to develop a portable dosimetry tool delivering dose maps in real time to improve the clinical application of radiochromic films., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart bactericidal textile enabling in-situ visual assessment of antimicrobial activity

  • Ferrer-Vilanova, Amparo
  • Jimenez Ezenarro, Josune
  • Ivanova, Kristina
  • Calvo, Óscar
  • Perelshtein, Ilana
  • Gorni, Giulio
  • Reguera, Ana Cristina
  • Rodríguez-Rodríguez, Rosalía
  • Blanes, Maria
  • Vigués, Núria
  • Mas, Jordi
  • Gedanken, Aharon
  • Tzanov, Tzanko
  • Guirado, Gonzalo
  • Muñoz-Berbel, Xavier
13 pages, 6 figures, 1 table, Hospital fabrics and wound dressings with antibacterial properties are essential to minimize infection risks associated with bacterial colonization of textiles. A key challenge of these materials lies in the difficulty in assessing their functional lifespan. Integrating bacterial-sensing elements into smart textiles enables real-time and in-situ evaluation of antibacterial activity. However, this approach is often hindered by the reactivity between bactericidal and bacterial-sensing components, the limited stability and selectivity of the sensing probes, and high production costs. Here, we address these challenges by presenting a smart textile that simultaneously provides antibacterial activity and bacterial-sensing capacity using a layer-by-layer sonochemical deposition method. Prussian blue, a chromogenic bacterial-sensing probe, is integrated onto hospital-grade antibacterial fabrics containing copper oxide nanoparticles. When the biocidal fabric begins to lose its antimicrobial activity, live bacteria in the textile metabolically reduce Prussian blue nanoparticles, triggering a visible colour change. This approach offers several key advantages, such as: (i) the resulting textile retains antibacterial activity comparable to conventional copper oxide-based textiles (A value > 4 in both cases); (ii) it provides a direct and visible colour transition from blue to colourless (>20 % colour losses) when the antibacterial coating begins to lose effectiveness, enabling straightforward monitoring of antibacterial lifespan without external instruments or reagents; (iii) the co-immobilization enhances coating stability, nearly doubling the binding strength of copper oxide and Prussian blue compared to single-layer coatings; and (iv), the additional Prussian blue layer significantly reduces the material cytotoxicity, enhancing biocompatibility for safer use in healthcare settings. These innovations offer a scalable, cost-effective, and multifunctional solution for infection control. The smart textile not only prevents bacterial spread but also provides timely, visual indications of coating degradation, making it a promising tool for improving patient safety in hospitals and for minimizing infection risks in schools and other high-risk environments., This work was supported by the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). Some of these experiments were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2021024980). The authors thank the Ministerio de Ciencia e Innovacion of Spain for financial support through the project PID2019-106171RB-I00, FJC2020-044866- I/MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First Tests of an Opto-Electro-Mechanical System for 2D Dose Analysis in Low Energy Proton Irradiated Films

  • Mena, Silvia
  • Karkour, N.
  • Alaphilippe, V.
  • Crepin, D.
  • Jiménez-Ramos, M. C.
  • López, J. García
  • Espino, J. M.
  • Pascual-Alvarez, D.
  • Riera-Llobet, Carla
  • Muñoz-Berbel, Xavier
  • Guirado, G.
  • Gibelin, L.
  • Linget, D.
  • Guardiola Salmerón, Consuelo
This work presents a 2D dosimetry analysis with a new micro-opto-electro-mechanical system of radiochromic films irradiated with a low energy proton beam. The new system is based on a 5 X 10 matrix of photodetectors controlled by both an in-house electronic circuit and a graphical user interface, which allows direct optical density measurements. We have investigated the performance of this 2D readout system using Gafchromic EBT3 films. The results were compared with those obtained using a standard analysis method based on a flat-bed scanner, and the results showed the feasibility of this system for 2D dose map evaluation. To the best of the authors’ knowledge, this is the first time that a two-dimensional micro-opto-electro-mechanical system has been used to analyze radiochromic films irradiated with low-energy protons. We intend to develop a portable 2D dosimetry tool that provides dose maps to speed up the reading of radiochromic films in radiotherapy., C.G. thanks the Ram\u00F3n y Cajal fellow (RYC2020-030247-I/AEI/10.13039/501100011033), the CSIC\u2019s Proyectos Intramurales Especiales (20225AT008), and the D\u00E9clic actions of pre-maturation (National institute of nuclear and particle physics \u2013 IN2P3/CNRS). N.K. thanks for the financial support of IJCLAB. M.C. Jim\u00E9nez-Ramos acknowledges support to this work through a VI PPIT-US contract. The authors also thank the Ministerio de Ciencia e Innovaci\u00F3n of Spain for financial support through project PID2019-106171RB-I00 (MCIN/AEI/10.13039/501100011033), PID2022-141293OB-I00, and PID2021-123879OB-C21. Besides, through the \u2018Mar\u00EDa de Maeztu Unit of Excelence\u2019 accreditation (CEX2023-001397-M). In addition, the authors thank AGAUR (Generalitat de Catalunya, 2021 SGR 00052). S.M. acknowledges support from the postdoctoral grant Juan de la Cierva JDC2022-048606-I, funding by MCIN/AEI/10.13039/501100011033 and the European Union \u201CNextGenerationEU\u201D/PRTR., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sonochemical coating of Prussian Blue for the production of smart bacterial-sensing hospital textiles

  • Ferrer-Vilanova, Amparo
  • Alonso, Yasmine
  • Dietvorst, Jiri
  • Pérez-Montero, Marta
  • Rodríguez-Rodríguez, Rosalía
  • Ivanova, Kristina
  • Tzanov, Tzanko
  • Vigués, Núria
  • Mas, Jordi
  • Guirado, Gonzalo
  • Muñoz-Berbel, Xavier
This work was supported the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). The authors thank the Ministerio de Ciencia e Innovación of Spain for financial support though the projects CTQ 2015-65439-R and PID2019-106171RB-I00., In healthcare facilities, environmental microbes are responsible for numerous infections leading to patient’s health complications and even death. The detection of the pathogens present on contaminated surfaces is crucial, although not always possible with current microbial detection technologies requiring sample collection and transfer to the laboratory. Based on a simple sonochemical coating process, smart hospital fabrics with the capacity to detect live bacteria by a simple change of colour are presented here. Prussian Blue nanoparticles (PB-NPs) are sonochemically coated on polyester-cotton textiles in a single-step requiring 15 min. The presence of PB-NPs confers the textile with an intensive blue colour and with bacterial-sensing capacity. Live bacteria in the textile metabolize PB-NPs and reduce them to colourless Prussian White (PW), enabling in situ detection of bacterial presence in less than 6 h with the bare eye (complete colour change requires 40 h). The smart textile is sensitive to both Gram-positive and Gram-negative bacteria, responsible for most nosocomial infections. The redox reaction is completely reversible and the textile recovers its initial blue colour by re-oxidation with environmental oxygen, enabling its re-use. Due to its simplicity and versatility, the current technology can be employed in different types of materials for control and prevention of microbial infections in hospitals, industries, schools and at home., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solid Materials with Near-Infrared-Induced Fluorescence Modulation

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Rubirola, Pau
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Solid molecular materials modulating their luminescent properties upon irradiation are typically based on photochromic dyes. Despite these are potentially interesting for applications such as anticounterfeiting, bioimaging, optical data storage, and writable/erasable devices, key features are preventing their use in marketable products: the lack of straightforward strategies to obtain near infrared (NIR) radiation-responding photochromic dyes and the dramatic response modification these molecules suffer in solids. Herein a photochrome-free approach is reported to achieve solid materials whose luminescence modulation is induced by NIR radiation. This strategy is based on the capacity of phase change materials (PCMs) to modify the emission properties of fluorescent dyes upon photothermally induced interconversion between their solid and liquid states. The preparation of several NIR-responsive thermofluorochromic materials of high fatigue resistance and nondestructive readout is illustrated and this approach is extended to different commercially available dyes, taking advantage of distinct fluorescence modulation mechanisms, providing, thus, color tunability. The modulation response is straightforwardly tuned by simply varying the irradiation power density, the gold nanoshell concentration, and/or the PCM type. This tunability allows to accomplish NIR-activated multistate thermofluorochromic materials and fast/slow/irreversible responses in NIR-writings/drawings of good spatial resolution, which can be of interest for barcodings, anticounterfeiting technologies and (re)writable devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sonochemical coating of Prussian Blue for the production of smart bacterial-sensing hospital textiles

  • Ferrer-Vilanova, Amparo|||0000-0002-4223-8442
  • Alonso, Yasmine
  • Dietvorst, Jiri|||0000-0003-0897-9199
  • Pérez-Montero, Marta
  • Rodríguez-Rodríguez, Rosalía
  • Ivanova, Kristina
  • Tzanov, Tzanko
  • Vigués, Núria|||0000-0002-7229-8112
  • Mas Gordi, Jordi|||0000-0002-1980-4522
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
In healthcare facilities, environmental microbes are responsible for numerous infections leading to patient's health complications and even death. The detection of the pathogens present on contaminated surfaces is crucial, although not always possible with current microbial detection technologies requiring sample collection and transfer to the laboratory. Based on a simple sonochemical coating process, smart hospital fabrics with the capacity to detect live bacteria by a simple change of colour are presented here. Prussian Blue nanoparticles (PB-NPs) are sonochemically coated on polyester-cotton textiles in a single-step requiring 15 min. The presence of PB-NPs confers the textile with an intensive blue colour and with bacterial-sensing capacity. Live bacteria in the textile metabolize PB-NPs and reduce them to colourless Prussian White (PW), enabling in situ detection of bacterial presence in less than 6 h with the bare eye (complete colour change requires 40 h). The smart textile is sensitive to both Gram-positive and Gram-negative bacteria, responsible for most nosocomial infections. The redox reaction is completely reversible and the textile recovers its initial blue colour by re-oxidation with environmental oxygen, enabling its re-use. Due to its simplicity and versatility, the current technology can be employed in different types of materials for control and prevention of microbial infections in hospitals, industries, schools and at home.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical Reduction of 4-Nitrobenzyl Phenyl Thioether for Activation and Capture of CO2

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Louault, Cyril
  • Mesa, Verónica
  • Gallardo, Iluminada|||0000-0003-3962-4745
  • Guirado, Gonzalo|||0000-0003-2128-7007
In this work, a new simple molecule, 4-nitrobenzyl phenyl thioether (1), is prepared and used for controlling and tuning CO reactivity in function of the electrode potential. The first part of the study is devoted to determining the electrochemical reduction mechanism of 1 in N,N-dimethylformamide under nitrogen. The compound shows a first reversible one-electron transfer process, whereas the reaction cleavage of the C-S bond takes place after a second electron transfer process through a stepwise mechanism (thermodynamic and kinetic parameters are conveniently determined). In the second part of the study, the inert atmosphere was replaced by a CO atmosphere. At low potential values, compound 1 acts as a redox mediator that allows the reduction of CO at ca. -1.2 V vs. SCE. The electrochemical generation of 1 at more negative potential values leads to a C-S bond cleavage reaction that yields the corresponding nitrobenzyl and thiosulfate anions, which react with CO. The nitro aromatic anion derivative makes it possible to obtain electrocarboxylated derivatives, whereas the thiophenolate anion captures CO reversibly. Hence, this research opens a new way of tuning and controlling the reaction processes associated with CO from homogenous catalysis at low negative potentials, to electrocarboxylation processes passing to CO reversible electrochemically triggered adsorption processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solid Multiresponsive Materials Based on Nitrospiropyran-Doped Ionogels

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Giménez-Gómez, Pablo|||0000-0003-3443-802X
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Hernando, Jordi|||0000-0002-1126-4138
The application of molecular switches for the fabrication of multistimuli-responsive chromic materials and devices still remains a challenge because of the restrictions imposed by the supporting solid matrices where these compounds must be incorporated: they often critically affect the chromic response as well as limit the type and nature of external stimuli that can be applied. In this work, we propose the use of ionogels to overcome these constraints, as they provide a soft, fluidic, transparent, thermally stable, and ionic-conductive environment where molecular switches preserve their solution-like properties and can be exposed to a number of different stimuli. By exploiting this strategy, we herein pioneer the preparation of nitrospiropyran-based materials using a single solid platform that exhibit optimal photo-, halo-, thermo-, and electrochromic switching behaviors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochromogenic Detection of Live Bacteria Using Soluble and Insoluble Prussian Blue

  • Ferrer-Vilanova, Amparo|||0000-0002-4223-8442
  • Alonso, Yasmine
  • J. Ezenarro, Josune|||0000-0003-3456-3787
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
Microbial detection is crucial for the control and prevention of infectious diseases, being one of the leading causes of mortality worldwide. Among the techniques developed for bacterial detection, those based on metabolic indicators are progressively gaining interest due to their simplicity, adaptability, and, most importantly, their capacity to differentiate between live and dead bacteria. Prussian blue (PB) may act as a metabolic indicator, being reduced by bacterial metabolism, producing a visible color change from blue to colorless. This molecule can be present in two main forms, namely, the soluble and the insoluble, having different properties and structures. In the current work, the bacterial-sensing capacity of soluble and insoluble PB will be tested and compared both in suspensions as PB-NPs and after deposition on transparent indium tin oxide-poly(ethylene terephthalate) (ITO-PET) electrodes. In the presence of live bacteria, PB-NPs are metabolized and completely reduced to the Prussian white state in less than 10 h for soluble and insoluble forms. However, when electrodeposited on ITO-PET substrates, less than 1 h of incubation with bacteria is required for both forms, although the soluble one presents faster metabolic reduction kinetics. This study paves the way to the use of Prussian blue as a metabolic indicator for the early detection of bacterial infection in fields like microbial diagnostics, surface sterilization, food and beverage contamination, and environmental pollution, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Study on the electrochromic properties of polypyrrole layers doped with different dye molecules

  • Bayat, Maryam|||0000-0003-2845-7312
  • Izadan, Hossein|||0000-0001-8778-7093
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Estrany, Francesc|||0000-0002-2696-1489
  • Dinari, Mohammad|||0000-0001-5291-7142
  • Semnani, Dariush
  • Alemán, Carlos|||0000-0003-4462-6075
  • Guirado, Gonzalo|||0000-0003-2128-7007
Three dye molecules (Dye) of Acid Brilliant Scarlet 3R (AR18), Amido Naphthol Red G (AR1), Indigo Carmine (IC), as well as sodium dodecyl sulfate (SDS) as dopant agents were used for electrochemical synthesis of polypyrrole (PPy) layers onto indium doped tin oxide (ITO) coated polyethylene terephthalate (PET) electrode. The morphology, electrochemical, optical, and spectroelectrochemical properties of the layers were investigated. The study of the electrochemical behavior showed that the presence of each AR18, AR1, or IC with SDS, had shown an excellent synergistic effect on the electrochemical stability of layers. The morphological characterization of the PPy/dopant(s) using atomic force microscopy (AFM) showed that the surface roughness in the PPy/IC-SDS layer was 39% and 32% less than the PPy/AR18-SDS and PPy/AR1-SDS, respectively. The absorption spectrum of PPy/dopant(s) in the UV-Vis-NIR wavelength range showed the formation of polaron and bipolaron in PPy chains. Also, the optical bandgap energy of PPy/dopant(s) decreased, and the fully doped state in all PPy films was observed. Spectroelectrochemical properties of the films showed that the simultaneous use of each dye molecule and the surfactant as dopant in PPy layers demonstrated proper electrochemical and optical stability and satisfactory electrochromic parameters. For example, the color contrast of PPy/AR18-SDS was 50%, while this parameter in control sample (PPy doped with lithium perchlorate) was 21%. Also, the cathodic and anodic coloration efficiency showed a 6-fold increase in PPy/Dye-SDS compared to PPy/ClO . In general, according to the results it is likely that by increasing the number of anion groups in the dye molecules and decreasing their dimensions as dopant agents, the electrochemical and electrochromic properties of the resultant layer would be improved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bacteria Detection at a Single-Cell Level through a Cyanotype-Based Photochemical Reaction

  • Dietvorst, Jiri|||0000-0003-0897-9199
  • Ferrer-Vilanova, Amparo|||0000-0002-4223-8442
  • Iyengar, S. N.|||0000-0001-5348-3526
  • Russom, Aman|||0000-0002-0242-358X
  • Vigués, Núria|||0000-0002-7229-8112
  • Mas Gordi, Jordi|||0000-0002-1980-4522
  • Vilaplana, Lluïsa|||0000-0002-9982-6704
  • Marco, María Pilar|||0000-0002-4064-1668
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
The detection of living organisms at very low concentrations is necessary for the early diagnosis of bacterial infections, but it is still challenging as there is a need for signal amplification. Cell culture, nucleic acid amplification, or nanostructure-based signal enhancement are the most common amplification methods, relying on long, tedious, complex, or expensive procedures. Here, we present a cyanotype-based photochemical amplification reaction enabling the detection of low bacterial concentrations up to a single-cell level. Photocatalysis is induced with visible light and requires bacterial metabolism of iron-based compounds to produce Prussian Blue. Bacterial activity is thus detected through the formation of an observable blue precipitate within 3 h of the reaction, which corresponds to the concentration of living organisms. The short time-to-result and simplicity of the reaction are expected to strongly impact the clinical diagnosis of infectious diseases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical incorporation of carbon dioxide into fluorotoluene derivatives under mild conditions

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Bernad, Jesús
  • Guirado, Gonzalo|||0000-0003-2128-7007
One of the main challenges to combat climate change is to eliminate or reuse Carbon dioxide (CO), the largest contributor to the greenhouse gases that cause global warming. It is also important to synthesize compounds through greener technologies in order to obtain more environmentally friendly solutions. This study describes the electrocarboxylation process of α,α,α-trifluorotoluene using different working electrodes (glassy carbon, silver and copper) and electrolytes (polar aprotic solvent and ionic liquid). Carboxylated compounds were obtained in the same way in both electrolytic medias with more than 80% conversion rates, high yields, good selectivity, and moderate efficiencies using silver and copper as cathodes in organic electrolytes and ionic liquids.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrocarboxylation of Spiropyran Switches through Carbon-Bromide Bond Cleavage Reaction

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Richart, Clara
  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Gallardo, Iluminada|||0000-0003-3962-4745
  • Hernando, Jordi|||0000-0002-1126-4138
  • Guirado, Gonzalo|||0000-0003-2128-7007
This manuscript deals with carbon capture and utilization to synthetize high-added chemicals using CO as a C1-organic building block for C-C bond formation. The study focuses on the electrocarboxylation of 1,3,3-trimethylindolino-6'-bromobenzopyrylospiran switch (Br-BIPS). Prior to the electrocarboxylation process, the electrochemical reduction mechanism of Br-BIPS and CO is disclosed in polar aprotic solvents using two different cathodes (glassy carbon and silver) under nitrogen atmosphere. Once the role of the cathode in the reduction carbon-bromide bond cleavage is understood, carboxylated spiropyran derivatives can be synthesized in moderate yields and conversion rates through an electrocarboxylation process using CO silver cathode and polar aprotic solvents. The "green" efficient route described in the current work would open a new sustainable strategy for designing and building "smart" surfaces with switchable physical properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multimodal Fluorescence Switching Materials, One Dye to Have Them All

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
  • Carrascull-Marín, Aleix
Off/on, on/off, and on/on fluorescence switching systems find application in a variety of areas, for each of which a particular dye or dye-switch tether must be specifically designed and synthesized. Herein it is demonstrated that such tight requirement can be avoided by using easily prepared mixtures of readily available emitters and phase change materials (PCMs). By proper selection of the PCM and, if needed, additives, thermo- and photothermoresponsive materials showing all classes of emission switching modes can be prepared from a single dye and without chemical modifications. This strategy can be generalized to distinct emitters and, thanks to the facile and versatile printability of dye-PCM mixtures, it can be used for the fabrication of fluorescent patterns showing complex (photo)thermal responses with direct applicability in sensing and anti-counterfeiting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spectroelectrochemical studies of electrochromic diarylethene ionic Liquids, From solution to ionogel based devices

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Cruz, Hugo|||0000-0002-1047-7342
  • Jordão, Noemí
  • Giménez-Gómez, Pablo|||0000-0003-3443-802X
  • Zalewska, Karolina
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Santos, Andreia F.M.
  • Hernando, Jordi|||0000-0002-1126-4138
  • Branco, Luís C.
  • Guirado, Gonzalo|||0000-0003-2128-7007
This study establishes the photoelectrochromic properties of four diarylethene ionic liquids (DAE-ILs) composed of a diarylethene dicarboxylate (DAE) moiety, as counter-anion, and different organic cations ([Cmim], [CPyr] , [N], [P]). The synthetized ILs viscous fluids maintain the photochemical and electrochemical properties of this well-known family of photoswitches, as well as the typical features of ILs (e.g., low melting point, and high thermal and electrochemical stability). Our strategy of making multi-stimuli-responsive ionic liquids by ionic exchange opens the door to easily tune the physicochemical properties of smart DAE-ILs in function of the selected cation. Finally, those DAE-ILs are used to formulate smart ionogels (IGs), a type of materials that, by showing good conductive properties and retaining the stimuli-responsive behavior of the embedded DAE molecules, allow the fabrication of photoelectrochemical devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electroinduced crosslinking of triphenylamine-based polybenzoxazines

  • Gascó, Carolina|||0000-0003-4435-8306
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Guirado, Gonzalo|||0000-0003-2128-7007
Polybenzoxazines attract much attention as good phenolic resins due to their interesting and useful properties. Recently, benzoxazine monomers have been employed as crosslinking agents to enhance the properties of different types of polymers by being used as additives to a secondary cure process. In this paper, we propose a new electroinduced approach to increase the crosslinking density of electroactive polybenzoxazines through the design of new monomers that contain triphenylamine groups as electrodimerization points. The use of electrochemical techniques means the crosslinking process can be monitored and also the electrochemical reaction process upon polybenzoxazine oxidation either in solution or ionogel matrixes can be disclosed. These studies lay the foundations for the design of smart polybenzoxazines that could undergo dual-cure mechanisms at low electrochemical potential values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversibly Switchable Fluorescent Molecular Systems Based on Metallacarborane-Perylenediimide Conjugates, Novel reversibly switchable fluorescent molecular systems based on metallacarborane-perylenediimide conjugates

  • Parejo Bruque, Laura
  • Chaari, Mahdi|||0000-0002-1888-2545
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Teixidor, Francesc|||0000-0002-3010-2417
  • Núñez, Rosario|||0000-0003-4582-5148
  • Hernando, Jordi|||0000-0002-1126-4138
Icosahedral metallacarboranes are θ-shaped anionic molecules in which two icosahedra share one vertex that is a metal center. The most remarkable of these compounds is the anionic cobalt-based metallacarborane [Co(CBH)], whose oxidation-reduction processes occur via an outer sphere electron process. This, along with its low density negative charge, makes [Co(CBH)] very appealing to participate in electron-transfer processes. In this work, [Co(CBH)] is tethered to a perylenediimide dye to produce the first examples of switchable luminescent molecules and materials based on metallacarboranes. In particular, the electronic communication of [Co(CBH)] with the appended chromophore unit in these compounds can be regulated upon application of redox stimuli, which allows the reversible modulation of the emitted fluorescence. As such, they behave as electrochemically-controlled fluorescent molecular switches in solution, which surpass the performance of previous systems based on conjugates of perylendiimides with ferrocene. Remarkably, they can form gels by treatment with appropriate mixtures of organic solvents, which result from the self-assembly of the cobaltabisdicarbollide-perylendiimide conjugates into 1D nanostructures. The interplay between dye π-stacking and metallacarborane electronic and steric interactions ultimately governs the supramolecular arrangement in these materials, which for one of the compounds prepared allows preserving the luminescent behavior in the gel state.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable Thermofluorochromic Sensors Based on Conjugated Polymers

  • Bellacanzone, Christian|||0000-0002-1986-6440
  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
Even though thermofluorochromic materials are eternal candidates for their use in multiple applications, they are still limited as they require complex synthetic strategies to accomplish tunable optical properties and/or provide optical changes only over a very wide temperature range. By taking advantage of the high sensitivity of the optical properties of conjugated polymers and oligomers to the external environment, herein phase change material (PCM)-based thermofluorochromic mixtures are created, where the solid-to-liquid transition of the PCM host triggers a sharp fluorescence color change of the dispersed polymers/oligomers. Fluorophore conjugation length, concentration, and PCM nature can be used to vary the spectral properties of the resulting materials along the visible region, covering a large part of the CIE 1931 color space. For the preparation of functional devices, this behavior can be directly transferred to the solid state by soaking or printing cellulose papers with the obtained thermofluorochromic mixtures as well as by structuring them into solid lipid particles that can be dispersed within polymer matrices. The resulting materials show very promising features as thermal sensors and anticounterfeiting labels.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fast Photoswitchable Molecular Prosthetics Control Neuronal Activity in the Cochlea

  • Garrido Charles, Aida|||0000-0002-9577-6682
  • Huet, Antoine|||0000-0001-6151-7183
  • Matera, Carlo|||0000-0001-6939-3859
  • Thirumalai, Anupriya|||0000-0002-3624-0343
  • Hernando, Jordi|||0000-0002-1126-4138
  • Llebaria, Amadeu|||0000-0002-8200-4827
  • Moser, Tobias|||0000-0001-7145-0533
  • Gorostiza, Pau|||0000-0002-7268-5577
Artificial control of neuronal activity enables the study of neural circuits and restoration of neural functions. Direct, rapid, and sustained photocontrol of intact neurons could overcome the limitations of established electrical stimulation such as poor selectivity. We have developed fast photoswitchable ligands of glutamate receptors (GluRs) to enable neuronal control in the auditory system. The new photoswitchable ligands induced photocurrents in untransfected neurons upon covalently tethering to endogenous GluRs and activating them reversibly with visible light pulses of a few milliseconds. As a proof of concept of these molecular prostheses, we applied them to the ultrafast synapses of auditory neurons of the cochlea that encode sound and provide auditory input to the brain. This drug-based method afforded the optical stimulation of auditory neurons of adult gerbils at hundreds of hertz without genetic manipulation that would be required for their optogenetic control. This indicates that the new photoswitchable ligands are also applicable to the spatiotemporal control of fast spiking interneurons in the brain.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photothermal polymerization of benzoxazines

  • Reyes Mateo, Kevin
  • Marquet, Jordi|||0000-0003-2210-8154
  • Hernando, Jordi|||0000-0002-1126-4138
  • Sebastián, Rosa María|||0000-0001-5519-9131
Despite the use of catalysts and initiators, high polymerization temperatures are typically required for polybenzoxazines, a severe constraint for their general application as high performance thermosets. In this work we pioneer a novel photothermal strategy for the synthesis of polybenzoxazines that takes places under light irradiation at ambient conditions. This method capitalizes on the intriguing optical properties of benzoxazine-catalyst systems, which show visible light absorption and locally generate large heat upon illumination that triggers polymerization. In this way a large variety of benzoxazine monomers can be converted into polymer materials that retain some of the relevant features of polybenzoxazines - e.g., high char yields. In addition, our photothermal approach allows spatial control of benzoxazine polymerization, which we exploit for the fabrication of polybenzoxazine patterns via photolithography.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-phase synthesis and photoluminescence of quaternary chalcohalide semiconductors

  • Roth, Alison N.
  • Opare-Addo, Jemima
  • Gi, Eunbyeol|||0000-0003-0846-8655
  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Schaller, Richard D.|||0000-0001-9696-8830
  • Smith, Emily A.|||0000-0001-7438-7808
  • Vela, Javier|||0000-0001-5124-6893
Mixed-metal chalcohalide semiconductors have emerged as promising candidates for photovoltaic applications. However, preparation of these multinary compounds using solution-phase techniques remains particularly challenging compared to traditional solid-state methods. To fully harness their potential, it is desirable to develop synthetic methods that enable control over both the phase purity and dimensionality of chalcohalides. Here, we report the solution-phase synthesis of PbSbSI and PbBiSI quaternary chalcohalides using readily available precursors. Fine tuning of reaction parameters allows for the isolation of rod-like morphologies with tunable diameters and aspect ratios. The quaternary chalcohalides display photoluminescence as an ensemble as well as at the single particle level, as demonstrated using fluorescence microscopy. We further evaluate the relative stability and band gap of PbSbSI polymorphs and their coloring patterns using electronic structure calculations. The synthetic methods developed here will motivate the study of ever more complex chalcohalides and other multinary semiconductors for new technological applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical tools to disclose the electrochemical reduction mechanism of CO2 in aprotic solvents and ionic liquids

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Ribas Saurí, Esteve|||0000-0003-4368-5014
  • Richart, Clara
  • Gallardo, Iluminada|||0000-0003-3962-4745
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Shaw, Scott K.
  • Guirado, Gonzalo|||0000-0003-2128-7007
Carbon dioxide (CO2) plays a key role in controlling the temperature of the Earth. But the increase in the concentration of CO2 in the atmosphere brings with it a series of consequences, originating several environmental problems. The use of electrochemical, spectroscopic and molecular dynamics techniques are useful toolkits to valorize carbon dioxide, and to know the reduction mechanism as a function of CO2 concentration, the cathode nature, and the electrolyte. This manuscript will be mainly centered in the use of ionic liquids (IL) for efficient CO2 capture and valorization into different valuable products thanks to the CO2 electrochemical reduction. In this sense, spectroelectrochemistry based on cyclic voltammetry coupled with Polarization Modulation-Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) and Infrared Reflection-Absorption Spectroscopy (IRRAS) appear to be an efficient instrument to follow the CO2 reactivity in imidazolium ionic liquids. Finally, we present molecular dynamics paired with cyclic voltammetry in order to calculate the diffusion coefficient of CO2 and the number of electrons involved in its reduction process, respectively. Therefore, the current research opens the door to the use of theoretical-experimental approaches altogether to determine how is the CO2 reduction mechanism. The CO2 reduction products in function of the solvent and nature of the cathode is suggested, proving that the product obtained from the electrochemical reduction of CO2 depends on the electrode material and the solvent.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A self-powered skin-patch electrochromic biosensor

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Río-Colín, Diego
  • Azizkhani, Haniyeh
  • Aller Pellitero, Miguel|||0000-0001-8739-2542
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • del Campo, F. Javier|||0000-0002-3637-5782
One of the limitations of many skin-patch wearable sensors today is their dependence on silicon-based electronics, increasing their complexity and unit cost. Self-powered sensors, in combination with electrochromic materials, allow simplifying the construction of these devices, leading to powerful analytical tools that remove the need for external detection systems. This work describes the construction, by screen-printing, of a self-powered electrochromic device that can be adapted for the determination of metabolites in sweat by the naked eye in the form of a 3 × 15 mm colour bar. The device comprises a lactate oxidase and osmium-polymer -based anode connected to a coplanar 3 × 15 mm Prussian Blue, PB, cathode printed over a transparent poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, PEDOT:PSS electrode. An ion-gel composed of Poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-co-HFP, a gelling agent, and ionic liquid 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate, EMIM-Tf, effectively separates the cathode display from the biosensing anode, protecting it from the sample. Despite its cathodic electrochromism, the PEDOT:PSS has a transmission above 90% and does not mask the Prussian Blue colour change because the cathode does not operate below 0 V vs Ag/AgCl at any time. The sensor displays lactate concentrations in the range of 0-10 mM over the length of the electrochromic display, which has a contrast ratio of 1.43. Although full response takes up to 24 min, 85% of the colour change is displayed within 10 min.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Study of P(VDF-co-HFP)-ionic liquid based ionogels for designing flexible displays

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
In flexible displays, solid electrolytes promote electron-transfer without compromising system integrity. Ionogels (IGs) are now preferred among other solid electrolytes, e.g. inorganic and hydrogel electrolytes, for being easier to produce than the former and showing excellent properties, including high ionic conductivities, broad electrochemical window, transparency, flexibility, and non-solvent volatility than the latter. IG properties widely depend on the composition and concentration of the ionic liquid (IL) in the polymeric matrix, affecting its transparency, integrity and flexibility. Here, we have investigated the loading and composition of the IL to produce P(VDF-co-HFP)-based IGs to be employed as substrates in the development of flexible photo-electrochromic displays. Single IG layers of P(VDF-co-HFP) loaded with 79% wt. of N TFSI were optimal among the IGs formulations, reaching conductivity values up to 1.06 mS·cm, showing high transparency (83% transmittance) and a large electrochemical window (3.2 V), while maintaining flexibility and integrity. The doping of the IG with the photo-electrochromic molecule spiropyran resulted in flexible displays with fast and reversible electrochromic and photochromic dynamics, not affecting the conformational changes of the molecule. These flexible photo-electrochromic displays, due to its simplicity, high-performance and low cost, are foreseen to impact in several fields, including smart windows, smart clothing or gas sensors, among others.
Dipòsit Digital de Documents de la UAB
Publicación

Spiropyran-based chromic hydrogels for CO2 absorption and detection

  • Marco, Arnau|||0000-0002-7731-0096
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Hernando, Jordi|||0000-0002-1126-4138
By enabling rapid, cost-effective, user-friendly and in situ detection of carbon dioxide, colorimetric CO2 sensors are of relevance for a variety of fields. However, it still remains a challenge the development of optical chemosensors for CO2 that combine high sensitivity, selectivity and reusability with facile integration into solid materials. Herein we pursued this goal by preparing hydrogels functionalized with spiropyrans, a well-known class of molecular switches that undergo different color changes upon application of light and acid stimuli. By varying the nature of the substituents of the spiropyran core, different acidochromic responses are obtained in aqueous media that allow discriminating CO2 from other acid gases (e.g., HCl). Interestingly, this behavior can be transferred to functional solid materials by synthesizing polymerizable spiropyran derivatives, which are used to prepare hydrogels. These materials preserve the acidochromic properties of the incorporated spiropyrans, thus leading to selective, reversible and quantifiable color changes upon exposure to different CO2 amounts. In addition, CO2 desorption and, therefore, recovery of the initial state of the chemosensor is favored by irradiation with visible light. This makes spiropyran-based chromic hydrogels promising systems for the colorimetric monitorization of carbon dioxide in a diversity of applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Use of CO2 for electrosynthesis

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Peral Pérez, José|||0000-0001-9574-6347
  • Guirado, Gonzalo|||0000-0003-2128-7007
A review of the main ideas related to the capture and valorization of CO by using electrochemical processes is presented. The advantages of using an electrode-controlled potential that provides the possibility of reducing CO to non-fossil carbon-based fuels, or of using this atmospheric pollutant in organic synthesis processes that rely on electrocarboxylation steps are outlined. The implications of a reduction in atmospheric CO emissions in the global climate change emergency, while at the same time finding alternative and clean ways of producing valuable fuels and chemicals, are emphasized. Particular attention is paid to the powerful role that ionic liquids can play as ideal solvents and electrolytes in such electrochemical reactions. A general description of the advantages that these liquids have for the solubilization and the support of the electrochemical reduction of CO is presented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Specific Bifunctionalization on the Surface of Phosphorus Dendrimers Syntheses and Properties

  • Petriccone, Massimo|||0000-0001-7279-8056
  • Laurent, Régis|||0000-0001-6742-1000
  • Turrin, Cédric-Olivier|||0000-0001-7187-8070
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Caminade, Anne-Marie|||0000-0001-8487-3578
Dendrimers are highly branched macromolecules possessing, in most cases, identical terminal functions. However, it is sometimes desirable to have two types of surface functions in order to fulfil specific properties. The stochastic functionalization is frequently used for such purposes, but the presence of an uncontrolled number of each type of terminal function, albeit acceptable for research purposes, has no practical use. Thus, it is highly desirable to find strategies suitable for the precise grafting of two different functional groups on the surface of dendrimers. The easiest way, and the most widely used, consists in using a bifunctional monomer to be grafted to all of the surface functions of the dendrimers. Two other strategies are known but are rarely used: the modification of an existing function, to generate two functions, and the sequential grafting of one function then of a second function. The three methods are illustrated in this review with polyphosphorhydrazone (PPH) dendrimers, together with their properties as catalysts, for materials, and as biological tools.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polybenzoxazines as new photothermal therapy agents

  • Reyes Mateo, Kevin
  • Careta, Oriol|||0000-0003-1333-0300
  • Hernando, Jordi|||0000-0002-1126-4138
  • Nogués, Carme|||0000-0002-6361-8559
  • Sebastián, Rosa María|||0000-0001-5519-9131
To make photothermal therapy an attractive alternative to conventional cancer treatments, the development of novel photothermal agents with enhanced properties is demanded. To tackle this challenge, herein we explored the use of polybenzoxazines, a well-known class of phenolic resins. Two different types of polybenzoxazine materials were prepared as potential photothermal agents: water-soluble polybenzoxazines as well as nanoparticles of hydrophobic polybenzoxazines, which can be generated in situ by polymer addition to cell culture medium. For both systems, irradiation with visible light led to significant photothermal effects, whose application to photoinduce human breast cancer cell's death was investigated in vitro. The best results were obtained for polybenzoxazine nanostructures, which exhibited successful cell internalization, minimal cytotoxicity in the dark and efficient photothermal killing of cancer cells upon illumination with high-penetrating red light. In combination with their low cost and facile preparation, this makes these polymer nanomaterials highly promising for photothermal therapy applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Strategies for the Preparation of Phosphorus Janus Dendrimers and Their Properties

  • Cejas-Sánchez, Joel|||0000-0001-5941-912X
  • Kajetanowicz, Anna|||0000-0003-0315-0998
  • Grela, Karol
  • Caminade, Anne-Marie|||0000-0001-8487-3578
  • Sebastián, Rosa María|||0000-0001-5519-9131
Dendrimers, being highly branched monodispersed macromolecules, predominantly exhibit identical terminal functionalities within their structural framework. Nonetheless, there are instances where the presence of two distinct surface functionalities becomes advantageous for the fulfilment of specific properties. To achieve this objective, one approach involves implementing Janus dendrimers, consisting of two dendrimeric wedges terminated by dissimilar functionalities. The prevalent method for creating these structures involves the synthesis of dendrons that possess a core functionality that complements that of a second dendron, facilitating their coupling to generate the desired dendrimers. In this comprehensive review, various techniques employed in the fabrication of phosphorus-based Janus dendrimers are elucidated, displaying the different coupling methodologies employed between the two units. The advantages of phosphorus dendrimers over classic dendrimers will be shown, as the presence of at least one phosphorus atom in each generation allows for the easy monitoring of reactions and the confirmation of purity through a simple technique such as 31 P NMR, as these structures typically exhibit easily interpretable patterns.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reusable Colorimetric Biosensors on Sustainable Silk-Based Platforms

  • Márquez, Augusto|||0000-0003-3074-7941
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Santos, Molíria V.|||0000-0003-0569-2424
  • Aznar-Cervantes, Salvador|||0000-0001-9809-7215
  • Dominguez, Carlos|||0000-0002-5972-7285
  • Omenetto, Fiorenzo|||0000-0002-0327-853X
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
In biosensor development, silk fibroin is advantageous for providing transparent, flexible, chemically/mechanically stable, biocompatible, and sustainable substrates, where the biorecognition element remains functional for long time periods. These properties are employed here in the production of point-of-care biosensors for resource-limited regions, which are able to display glucose levels without the need for external instrumentation. These biosensors are produced by photopatterning silk films doped with the enzymes glucose oxidase and peroxidase and photoelectrochromic molecules from the dithienylethene family acting as colorimetric mediators of the enzymatic reaction. The photopatterning results from the photoisomerization of dithienylethene molecules in the silk film from its initial uncolored opened form to its pink closed one. The photoisomerization is dose-dependent, and colored patterns with increasing color intensities are obtained by increasing either the irradiation time or the light intensity. In the presence of glucose, the enzymatic cascade reaction is activated, and peroxidase selectively returns closed dithienylethene molecules to their initial uncolored state. Color disappearance in the silk film is proportional to glucose concentration and used to distinguish between hypoglycemic (below 4 mM), normoglycemic (4-6 mM), and hyperglycemic levels (above 6 mM) by visual inspection. After the measurement, the biosensor can be regenerated by irradiation with UV light, enabling up to five measurement cycles. The coupling of peroxidase activity to other oxidoreductases opens the possibility to produce long-life reusable smart biosensors for other analytes such as lactate, cholesterol, or ethanol.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Diverse Approaches for the Difunctionalization of PPH Dendrimers, Precise Versus Stochastic, How Does this Influence Catalytic Performance?

  • Petriccone, Massimo|||0000-0001-7279-8056
  • Laurent, Régis|||0000-0001-6742-1000
  • Caminade, Anne-Marie|||0000-0001-8487-3578
  • Sebastián, Rosa María|||0000-0001-5519-9131
Random difunctionalization of dendrimer surfaces, frequently employed in biological applications, provides the advantage of dual functional groups through a synthetic pathway that is simpler compared to precise difunctionalization. However, is the random difunctionalization as efficient as the precise difunctionalization on the surface of dendrimers? This question is unanswered to date because most dendrimer families face challenges in achieving precise functionalization. Polyphosphorhydrazone (PPH) dendrimers present a unique opportunity to obtain precise difunctionalization at each terminal branching point. The work concerning catalysis we report with PPH dendrimers, whether precisely or randomly functionalized, addresses this question. Across PPH dendrimers, from generations 1 to 3, precise functionalization consistently outperforms random functionalization in terms of efficiency. This finding introduces a novel concept in dendrimer science, emphasizing the superiority of precise over random functionalization methodologies. Introducing a groundbreaking concept in the field of dendrimers.