Pasar al contenido principal

NUEVOS NANOVEHICULOS PARA TERANOSTICA DE ENFERMEDADES CEREBRALES

RTI2018-098027-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 50
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí, Guillem
  • Aguilà, David
  • Pané, Salvador
  • deMello, Andrew J.
  • Rotaru, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system., This work was partially supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Projects no. 200021_160174 and 200021 181988), MAT 2015–70615-R and MINECOCTQ2017-88948-P and RTI2018-098027-B-C21 from the Spanish Government funds, and by the European Regional Development Fund (ERDF). J.P.L. and S.P. acknowledge networking support by the COST Action CM1407 “e-minds”. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). S.S-G. acknowledges the support from MINECO BES-2015-071492 grant. A.R. acknowledges the European Commission through the SPINSWITCH project (H2020-MSCA-RISE-2016, Grant Agreement No. 734322). Additionally, all authors acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQACCSIC. G.A. thanks support by the Generalitat de Catalunya through the ICREA Academia Prize 2018 Authors A. Abrishamkar, S. Suárez–García and S. Sevim contributed equally to this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Luminescent silicon-based nanocarrier for drug delivery in colorectal cancer cells

  • Marcelo, Gonçalo A.
  • Montpeyó, David
  • Novio, Fernando
  • Ruiz Molina, Daniel
  • Lorenzo, Julia
  • Oliveira, Elisabete
Nanocarriers sensitive to exogenous or endogenous stimuli emerged as an attractive alternative to target drug delivery, with inorganic silica mesoporous nanoparticles (MNs) playing a core role in the development of a new generation of non-toxic and tuneable nanocarriers. A sensitive nanovector (NANO1) comprising luminescent silicon quantum dots (SiQDs) and functionalized with MNs was synthesised and loaded with doxorubicin (DOX). NANO1 nanoparticles have a size of 74 ± 10 nm and DOX loading percentages of ca. 43%. As a control sample, a similar nanocarrier (NANO2), without SiQDs, was also synthesised and loaded with DOX. Release profile studies, in PBS, revealed the strong NANO1@DOX pH-dependant behaviour, with a pH 5.0 favouring the release of DOX to percentages of ca. 70%. Cytotoxicity assessments of both free and DOX-loaded nanocarriers were evaluated in human cell lines of colon, revealing both free drug and drug-loaded nanoparticles to be concentration-dependent., This work was supported by the Associate Laboratory Research Unit for Green Chemistry - Clean Processes and Technologies - LAQV which is financed by national funds from FCT/MEC (UID/QUI/50006/2013) and co-financed by the ERDF under the PT2020 Partnership Agreement (POCI-01-0145-FEDER- 007265); by the Scientific Society PROTEOMASS (Portugal) (General Funding Grant) and by the Spanish Ministry of Science, Innovation and Universities project RTI2018-098027-B-C22. This work was also supported by grant RTI2018-098027-B-C21 and RTI2018-088027-B-C22 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). F. N thanks to COST Action CA17121. F. N and J. L thanks to COST Action CA15138. G.M thanks to FCT/MEC (Portugal) for his doctoral grant PD/BD/142865/2018. E. O thanks FCT/MEC (Portugal) for the individual contract, CEECIND/00648/2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid materials with near‐infrared‐induced fluorescence modulation

  • Otaegui, Jaume R.
  • Rubirola, Pau
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Solid molecular materials modulating their luminescent properties upon irradiation are typically based on photochromic dyes. Despite these are potentially interesting for applications such as anticounterfeiting, bioimaging, optical data storage, and writable/erasable devices, key features are preventing their use in marketable products: the lack of straightforward strategies to obtain near infrared (NIR) radiation‐responding photochromic dyes and the dramatic response modification these molecules suffer in solids. Herein a photochrome‐free approach is reported to achieve solid materials whose luminescence modulation is induced by NIR radiation. This strategy is based on the capacity of phase change materials (PCMs) to modify the emission properties of fluorescent dyes upon photothermally induced interconversion between their solid and liquid states. The preparation of several NIR‐responsive thermofluorochromic materials of high fatigue resistance and nondestructive readout is illustrated and this approach is extended to different commercially available dyes, taking advantage of distinct fluorescence modulation mechanisms, providing, thus, color tunability. The modulation response is straightforwardly tuned by simply varying the irradiation power density, the gold nanoshell concentration, and/or the PCM type. This tunability allows to accomplish NIR‐activated multistate thermofluorochromic materials and fast/slow/irreversible responses in NIR‐writings/drawings of good spatial resolution, which can be of interest for barcodings, anticounterfeiting technologies and (re)writable devices., This work was supported by the Spanish Research Agency and European Regional Development Funds (PID2019‐106171RB‐I00 and RTI2018‐098027‐B‐C21 projects) and Generalitat de Catalunya (2017 SGR00465 project). ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme (Generalitat de Catalunya) and acknowledges support from the Severo Ochoa programme (AEI, SEV‐2017‐0706). J.R.O. thanks to Agencia de Gestión de Ayudas Universitarias y de Investigación (AGAUR) for his predoctoral FI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly transparent photochromic films with a tunable and fast solution-like response

  • Torres-Pierna, Héctor
  • Ruiz Molina, Daniel
  • Roscini, Claudio
The increasing interest towards photochromic films and their practical applications is driving researchers in the continuous design and synthesis of novel organic photochromic dyes with optimized performances in polymeric matrices. However, whereas their photochromic properties could be readily rationalized in organic liquid solutions, these could not be directly extrapolated to polymers as their performance changes unpredictably upon integration into a solid matrix. This leads to a time-consuming synthetic re-tuning of the dye chemical structure and/or the polymeric medium. To avoid this, herein we report an efficient, straightforward and universal strategy to embed commercial T-type organic photochromic dyes of different nature in a polymeric material without compromising their optimum solution absorption and isomerization kinetics. Our approach is based on trapping emulsified nanodroplets of a hydrophobic solution enclosing the dye into a hydrophilic polymeric matrix. The material is prepared through one single process using commercially available materials, without further modification of the components (the dye and the polymer matrix) nor requiring previous encapsulation steps. The films, which manifest true solution liquid-like and finely tunable photochromic behavior, are also highly transparent, recyclable, and scalable, and show enhanced fatigue resistance, making them highly suitable for different smart glass applications., This work was supported by grants from the Spanish Research Agency funds (AEI, grant no. RTI2018-098027-B-C21) and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). H. T. P. thanks the Generalitat de Catalunya (AGAUR) for the fellowship Doctorats Industrials. The authors acknowledge Futurechromes S. L. for the funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coordination polymers nanoparticles for bioimaging

  • Suárez-García, Salvio
  • Solorzano, Rubén
  • Novio, Fernando
  • Alibés, Ramón
  • Busqué, Félix
  • Ruiz Molina, Daniel
Early diagnosis of patient diseases is subjected to the appropriate use of bioimaging techniques. For this reason, the development of contrast agents that improve and enhance the response of current clinical imaging practices is a pressing concern. Non-invasive bioimaging techniques most often need specific probes to follow and measure biological routes in living systems. These molecular imaging agents must exhibit: I) a remarkable contrast effect, i.e. a high signal-to-noise ratio under real physiological conditions, II) pronounced in vivo stability under the effect of numerous enzymes or proteases present in serum or targeted tissue equilibrated with a fast clearance from healthy organs and III) low cost and eco-friendly production. To overcome current drawbacks that hindrance the full development of the different bioimaging techniques, several groups are exploring nanoparticles as contrast agents. In this scenario, coordination polymer nanoparticles have emerged as a handy platform offering predesigned unique advantages thanks to their chemical flexibility, structural diversity and tailoring skills. Indeed, these systems reveal high metal cargos, low toxicity and multifunctional character by adequately selecting the combination of metal ions and ligands. Moreover, in a reminiscent way of organic polymeric nanoparticles, coordination polymer nanoparticles have also demonstrated its ability to encapsulate therapeutic-active molecules, thus combining diagnostic and therapeutic functionalities, the so-called Theranostic nanomedicine. For all these reasons, the use of this family of nanoparticles as imaging contrast agents has attracted broad interest over the last years with numerous examples being reported. Herein, we review main accomplishments in the area grouped according to the used technology, including magnetic resonance imaging, computed tomography, optical imaging, radioimaging or photoacoustic imaging., This work was supported by grants RTI2018-098027-B-C21, CTQ2016-75363-R and RED2018-102471-T from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). R. S. thanks the Ministerio de Educación, Cultura y Deporte for the predoctoral grant FPU14/03170. S.S.-G. acknowledges the support from MINECO BES-2015-071492 grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gossypol Treatment Restores Insufficient Apoptotic Function of DFF40/CAD in Human Glioblastoma Cells

  • Martínez-Escardó, Laura
  • Alemany, Montse
  • Sánchez-Osuna, María
  • Sánchez-Chardi, Alejandro
  • Roig-Martínez, Meritxell
  • Suárez-García, Salvio
  • Ruiz Molina, Daniel
  • Vidal, Noemí
  • Plans, Gerard
  • Majós, Carles
  • Ribas, Judit
  • Baltrons, María Antonia
  • Bayascas, Jose R.
  • Barcia, Carlos
  • Bruna, Jordi
  • Yuste, Víctor J.
Glioblastoma (GBM) is a highly aggressive brain tumor and almost all patients die because of relapses. GBM-derived cells undergo cell death without nuclear fragmentation upon treatment with different apoptotic agents. Nuclear dismantling determines the point-of-no-return in the apoptotic process. DFF40/CAD is the main endonuclease implicated in apoptotic nuclear disassembly. To be properly activated, DFF40/CAD should reside in the cytosol. However, the endonuclease is poorly expressed in the cytosol and remains cumulated in the nucleus of GBM cells. Here, by employing commercial and non-commercial patient-derived GBM cells, we demonstrate that the natural terpenoid aldehyde gossypol prompts DFF40/CAD-dependent nuclear fragmentation. A comparative analysis between gossypol- and staurosporine-treated cells evidenced that levels of neither caspase activation nor DNA damage were correlated with the ability of each compound to induce nuclear fragmentation. Deconvoluted confocal images revealed that DFF40/CAD was almost completely excluded from the nucleus early after the staurosporine challenge. However, gossypol-treated cells maintained DFF40/CAD in the nucleus for longer times, shaping a ribbon-like structure piercing the nuclear fragments and building a network of bridged masses of compacted chromatin. Therefore, GBM cells can fragment their nuclei if treated with the adequate insult, making the cell death process irreversible., This work was supported by grants SAF2017-83206-R funded by MCIN/Government of Spain (to V.J.Y.), SLT008/18/00028 from the CERCA Program/Generalitat de Catalunya (to J.B.), PGC2018-096003-B-I00 funded by MCI/AEI/10.130339/501100011033 and by ERDF A way of making Europe (to C.B.), and RTI2018-098027-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe (to D.R.-M.). The ICN2 is supported by the Severo Ochoa Centres of Excellence Program, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. The ICN2 is under the CERCA Program/Generalitat de Catalunya. L.M.-E. was recipient of a “Personal Investigador en Formació” fellow (BQ-2016-2) from Universitat Autònoma de Barcelona, and later supported by Oncobell program (IDIBELL)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antitumour activity of coordination polymer nanoparticles

  • Suárez-García, Salvio
  • Solorzano, Rubén
  • Alibés, Ramón
  • Busqué, Félix
  • Novio, Fernando
  • Ruiz Molina, Daniel
Nanoscale coordination polymers (NCPs) have fascinated researchers over the last years. Their intrinsic theranostic properties of metal ions and organic ligands, the encapsulation of several drugs/biomolecules with excellent yields and the surface functionalisation, enhancing their biocompatibility and targeting, have remarkably impacted in prospective drug delivery alternatives in medicine. Moreover, the properties and characteristics of these nanoparticles (NPs) can be fine-tuned thanks to the synthetic flexibility of coordination chemistry. For all these reasons, the number of examples published has grown exponentially over the last years, embracing different disciplines such as molecular electronics, sensors or nanomedicine, among others. Specifically, significant advances in antitumoural applications are reported, one of the areas where this novel family of NPs has experienced a considerable advance. NCPs have accomplished a high sophistication degree and efficiency as theranostic nanoplatforms (i.e., drug delivery carriers and bioimaging probes) with long residence time in the bloodstream, targeting capacities and remarkable cellular internalisation. In this review, an introduction emphasizing the advantages of NPs for cancer treatment is included. Later on, the most representative examples of NCPs for antitumoural applications are described grouped into six mean representative areas: i) encapsulation approaches, ii) stimuli-responsive NCPs, iii) metal chemotherapy, iv) photodynamic therapy (PDT), v) unconventional therapeutic approaches and vi) theranostics. Particular emphasis is given to understand the encapsulation/release properties of these particles at the nanoscale and their interaction with biological environments, highlighting any limitation and challenges that these systems are facing from a clinical translation perspective and envisioning possible future trends and areas that will deserve further attention for the following years., This work was supported by grants RTI2018-098027-B-C21, PID2019-106403RB-I00 and RED2018-102471-T from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). R. S. thanks the Ministerio de Educación, Cultura y Deporte for the predoctoral grant FPU14/03170. S.S.-G. acknowledges the support from MINECO BES-2015-071492 grant. Special thanks to Dr. Javier Saiz-Poseu from 3D Science Visuals (Instagram: 3dscivisuals) for contributing with graphic design and scientific illustrations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioinspired theranostic coordination polymer nanoparticles for intranasal dopamine replacement in parkinson's disease

  • García-Pardo, Javier
  • Novio, Fernando
  • Nador, Fabiana
  • Cavaliere, Ivana
  • Suárez-García, Salvio
  • Lope-Piedrafita, Silvia
  • Candiota, Ana Paula
  • Romero-Giménez, Jordi
  • Rodríguez-Galván, Beatriz
  • Bové, Jordi
  • Vila, Miquel
  • Lorenzo, Julia
  • Ruiz Molina, Daniel
Dopamine (DA) is one of the main neurotransmitters found in the central nervous system and has a vital role in the function of dopaminergic (DArgic) neurons. A progressive loss of this specific subset of cells is one of the hallmarks of age-related neurodegenerative disorders such as Parkinson's disease (PD). Symptomatic therapy for PD has been centered in the precursor l-DOPA administration, an amino acid precursor of DA that crosses the blood-brain barrier (BBB) while DA does not, although this approach presents medium- to long-term side effects. To overcome this limitation, DA-nanoencapsulation therapies are actively being searched as an alternative for DA replacement. However, overcoming the low yield of encapsulation and/or poor biodistribution/bioavailability of DA is still a current challenge. Herein, we report the synthesis of a family of neuromelanin bioinspired polymeric nanoparticles. Our system is based on the encapsulation of DA within nanoparticles through its reversible coordination complexation to iron metal nodes polymerized with a bis-imidazol ligand. Our methodology, in addition to being simple and inexpensive, results in DA loading efficiencies of up to 60%. In vitro, DA nanoscale coordination polymers (DA-NCPs) exhibited lower toxicity, degradation kinetics, and enhanced uptake by BE(2)-M17 DArgic cells compared to free DA. Direct infusion of the particles in the ventricle of rats in vivo showed a rapid distribution within the brain of healthy rats, leading to an increase in striatal DA levels. More importantly, after 4 days of nasal administrations with DA-NCPs equivalent to 200 μg of the free drug per day, the number and duration of apomorphine-induced rotations was significantly lower from that in either vehicle or DA-treated rats performed for comparison purposes. Overall, this study demonstrates the advantages of using nanostructured DA for DA-replacement therapy., This work was supported by grants RTI2018-098027-B-C21 and RTI2018-098027-B-C22 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). M.V. received funding from “la Caixa” Foundation (ID 1178 100010434, under the agreement LCF/PR/HR17/52150003) 1179, Ministry of Economy and Competitiveness (MINECO, Spain) (SAF2016-77541-R) and The Michael J. Fox Foundation for Parkinson’s Research 1180 (Grant ID: 15291.01). A.P.C. received funding from the ATTRACT project funded by the EC under Grant Agreement 777222. The authors thank the support from COST Action CA17121.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Metal-Phenol Nanoparticles with Polydopamine-like Coating for PET/SPECT/CT Imaging

  • Suárez-García, Salvio
  • Esposito, Tullio V. F.
  • Neufeld-Peters, Jenna
  • Bergamo, Marta
  • Yang, Hua
  • Saatchi, Katayoun
  • Schaffer, Paul
  • Häfeli, Urs O.
  • Ruiz Molina, Daniel
  • Rodríguez-Rodríguez, Cristina
  • Novio, Fernando
The validation of metal-phenolic nanoparticles (MPNs) in preclinical imaging studies represents a growing field of interest due to their versatility in forming predesigned structures with unique properties. Before MPNs can be used in medicine, their pharmacokinetics must be optimized so that accumulation in nontargeted organs is prevented and toxicity is minimized. Here, we report the fabrication of MPNs made of a coordination polymer core that combines In(III), Cu(II), and a mixture of the imidazole 1,4-bis(imidazole-1-ylmethyl)-benzene and the catechol 3,4-dihydroxycinnamic acid ligands. Furthermore, a phenolic-based coating was used as an anchoring platform to attach poly(ethylene glycol) (PEG). The resulting MPNs, with effective hydrodynamic diameters of around 120 nm, could be further derivatized with surface-embedded molecules, such as folic acid, to facilitate in vivo targeting and multifunctionality. The prepared MPNs were evaluated for in vitro plasma stability, cytotoxicity, and cell internalization and found to be biocompatible under physiological conditions. First, biomedical evaluations were then performed by intrinsically incorporating trace amounts of the radioactive metals 111In or 64Cu during the MPN synthesis directly into their polymeric matrix. The resulting particles, which had identical physicochemical properties to their nonradioactive counterparts, were used to perform in vivo single-photon emission computed tomography (SPECT) and positron emission tomography (PET) in tumor-bearing mice. The ability to incorporate multiple metals and radiometals into MPNs illustrates the diverse range of functional nanoparticles that can be prepared with this approach and broadens the scope of these nanoconstructs as multimodal preclinical imaging agents., This work was supported by grant RTI2018-098027-B-C21 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). Financial support from the University of Copenhagen, the Phospholipid Research Center (Heidelberg, Germany), and the Lundbeck Foundation (Copenhagen, Denmark) is kindly acknowledged. TRIUMF receives funding via a contribution agreement with the National Research Council of Canada. T.V.F.E. received financial support from a Killam Doctoral Fellowship and a Four-Year Doctoral Fellowship (4YF) from the University of British Columbia (UBC). K.S. acknowledges the generous support of BWXT Isotope Technology Group for the supply of the radioisotope 111In. The authors also thank the technicians and veterinarians at UBC Centre for Comparative Medicine (CCM, Vancouver, Canada), especially Dr. Laura Mowbray, Jana Hodasova, and Ava McHugh for their expert assistance in the imaging lab, and the Canada Foundation for Innovation (project no. 25413) for its support of the imaging facility (http://invivoimaging.ca/). S.S.-G. acknowledges the support from MINECO BES-2015-071492 grant. S.S.-G. and C.R.-R. acknowledge Dr. Pedro L. Esquinas for fruitful discussions about the quantitative measurements of 111In and 64Cu. Special thanks to Dr. Javier Saiz-Poseu from 3D Science Visuals (Instagram: 3dscivisuals) for contributing with graphic design and scientific illustrations. The authors acknowledge the support from the Cost ENBA CA15216.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoactivable ruthenium-based coordination polymer nanoparticles for light-induced chemotherapy

  • Zhang, Junda
  • Ramu, Vadde
  • Zhou, Xue-Quan
  • Frias, Carolina
  • Ruiz Molina, Daniel
  • Bonnet, Sylvestre
  • Roscini, Claudio
  • Novio, Fernando
Green light photoactive Ru-based coordination polymer nanoparticles (CPNs), with chemical formula [[Ru(biqbpy)] (bis)](PF) (biqbpy = 6,6-bis[N-(isoquinolyl)-1-amino]-2,2-bipyridine; bis = bis(imidazol-1-yl)-hexane), were obtained through polymerization of the trans-[Ru(biqbpy) (dmso)Cl]Cl complex (Complex 1) and bis bridging ligands. The as-synthesized CPNs (50 ± 12 nm di-ameter) showed high colloidal and chemical stability in physiological solutions. The axial bis(imidazole) ligands coordinated to the ruthenium center were photosubstituted by water upon light irradiation in aqueous medium to generate the aqueous substituted and active ruthenium complexes. The UV-Vis spectral variations observed for the suspension upon irradiation corroborated the photoactivation of the CPNs, while High Performance Liquid Chromatography (HPLC) of irradiated particles in physiological media allowed for the first time precisely quantifying the amount of photoreleased complex from the polymeric material. In vitro studies with A431 and A549 cancer cell lines revealed an 11-fold increased uptake for the nanoparticles compared to the monomeric complex [Ru(biqbpy)(N-methylimidazole) ](PF) (Complex 2). After irradiation (520 nm, 39.3 J/cm), the CPNs yielded up to a two-fold increase in cytotoxicity compared to the same CPNs kept in the dark, indicating a selective effect by light irradiation. Meanwhile, the absence of O production from both nanostructured and monomeric prodrugs concluded that light-induced cell death is not caused by a photodynamic effect but rather by photoactivated chemotherapy., his work was supported by grant RTI2018-098027-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. With the support from “Metalfármacos multifuncionales para el diagnóstico y la terapia” with grant RED2018-102471-T funded by MCIN/AEI/10.13039/501100011033. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. J.D. Zhang thanks the BIST PhD Fellowship Programme (This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754558). NWO is kindly acknowledged for financial support to SB via a VICI grant. COST is kindly acknowledged for stimulating scientific discussion and financial support via the Cost Action CA 17140 “Cancer nanomedicine from the bench to the bedside”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes

  • Pepió, Belén
  • Contreras-Pereda, Noemí
  • Suárez-García, Salvio
  • Hayati, Payam
  • Benmansour, S.
  • Retailleau, Pascal
  • Morsali, Ali
  • Ruiz Molina, Daniel
Herein, a new 2-dimensional coordination polymer based on copper (II), {Cu(L)(DMF)}, where L stands for 1,2,4,5-benzenetetracarboxylate (complex 1) is synthesized. Interestingly, we demonstrate that both solvent and sonication are relevant in the top-down fabrication of nanostructures. Water molecules are intercalated in suspended crystals of complex 1 modifying not only the coordination sphere of Cu(II) ions but also the final chemical formula and crystalline structure obtaining {[Cu(L)(HO)]·HO} (complex 2). On the other hand, ultrasound is required to induce the nanostructuration. Remarkably, different morphologies are obtained using different solvents and interconversion from one morphology to another seems to occur upon solvent exchange. Both complexes 1 and 2, as well as the corresponding nanostructures, have been fully characterized by different means such as infrared spectroscopy, x-ray diffraction and microscopy., This work was supported by grant RTI2018-098027-B-C21 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). Noemí Contreras Pereda’s project that gave rise to these results received the support of a fellowship from “laCaixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/ES17/11600012.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoresponsive multicolor-emissive materials based on solid lipid nanoparticles

  • Otaegui, Jaume R.
  • Latterini, Loredana
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Despite the recent advances in the field of thermofluorochromism, the fabrication of thermoresponsive multicolor-emissive materials in a simple, low-cost and versatile manner still remains a challenge. Herein we accomplish this goal by expanding the concept of matrix-induced thermofluorochromism, where a sudden two-state variation of dyes' emission is promoted by the solid-liquid transition of a surrounding phase change material (e.g., paraffins). We demonstrate that this behavior can be transferred to the nanoscale by the synthesis of dye-loaded solid lipid nanoparticles, different types of which can then be combined into a single platform to obtain multicolor thermofluorochromism using a single type of emitter. Because of the reduced dimensions of these particles, they can be utilized to prepare transparent nanocomposites and inkjet-printed patterns showing complex thermoresponsive luminescence signals and applications ranging from smart displays to thermal sensing and high-security anti-counterfeiting., This work was supported by MINECO/FEDER (PID2019-106171RB-I00 and RTI2018-098027-B-C21 projects) and Generalitat de Catalunya (2017 SGR00465 project). J. R. O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. ICN2 acknowledges support from the Severo Ochoa programme (MINECO, SEV-2017-0706) and the CERCA programme (Generalitat de Catalunya). L. L. is grateful to Ministero dell’Istruzione, dell’Università e della Ricerca (MIUR) for the support through the program “Dipartimenti di Eccellenza 2018–2022” (grant AMIS) and acknowledges CSGI (Consorzio Interuniversitario per lo Sviluppo dei Sistemi a Grande Interfase, Research Center for Colloid and Surface Science) for the support. We acknowledge the Research Support Division–Instrumentation Unit of ICN2 for the help in the instrumentation design.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive properties of triphenylene MOFs and COFs

  • Contreras-Pereda, Noemí
  • Pané, Salvador
  • Puigmartí Luis, Josep
  • Ruiz Molina, Daniel
Triphenylene (TP) based materials have experienced a great expansion in the latest years. TP molecules have interesting optoelectronic properties, arising from the aromatic core, which have been exploited in functional two-dimensional (2D) Metal-Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) aside other organic polymers. In this review we summarize synthetic approaches of TP-based 2D MOFs and COFs emphasizing on the resulting morphology, crystalline domains and orientation, proven to have great impact on the properties and performance of these materials in functional devices. Specifically, we report a detailed description on the different TP-based 2D structures detailing the influence of the chemical and crystalline structure on the electronic properties, specially the in-plane and out-of-plane contribution to the electrical conductivity. Finally, we give also attention and present several examples of functional devices made out with these electronic materials with great impact in the literature as well as in future technological applications., This work was supported by grant RTI2018-098027-B-C21 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). N. C.-P. acknowledges the support of fellowship from “laCaixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/ES17/11600012. J. P.-L. acknowledges support from the European Research Council Starting Grant microCrysFact (ERC-2015-STG No. 677020), the Swiss National Science Foundation (project no. 200021_181988), and grant PID2020-116612RB-C33 funded by MCIN/ AEI /10.13039/501100011033. S.P. acknowledges support from the ERC-2017-CoG HINBOTS Grant No. 771565.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water-Stable Carborane-Based Eu3+/Tb3+ Metal-Organic Frameworks for Tunable Time-Dependent Emission Color and Their Application in Anticounterfeiting Bar-Coding

  • Li, Zhen
  • Núñez Aguilera, Rosario
  • Light, Mark E.
  • Ruiz, Eliseo
  • Teixidor, Francesc
  • Viñas, Clara
  • Ruiz Molina, Daniel
  • Roscini, Claudio
  • Giner Planas, José
Luminescent lanthanide metal-organic frameworks (Ln-MOFs) have been shown to exhibit relevant optical properties of interest for practical applications, though their implementation still remains a challenge. To be suitable for practical applications, Ln-MOFs must be not only water stable but also printable, easy to prepare, and produced in high yields. Herein, we design and synthesize a series of m CB-Eu y Tb 1-y (y = 0-1) MOFs using a highly hydrophobic ligand mCBL1: 1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane. The new materials are stable in water and at high temperature. Tunable emission from green to red, energy transfer (ET) from Tb3+ to Eu3+, and time-dependent emission of the series of mixed-metal m CB-Eu y Tb 1-y MOFs are reported. An outstanding increase in the quantum yield (QY) of 239% of mCB-Eu (20.5%) in the mixed mCB-Eu0.1Tb0.9 (69.2%) is achieved, along with an increased and tunable lifetime luminescence (from about 0.5 to 10 000 μs), all of these promoted by a highly effective ET process. The observed time-dependent emission (and color), in addition to the high QY, provides a simple method for designing high-security anticounterfeiting materials. We report a convenient method to prepare mixed-metal Eu/Tb coordination polymers (CPs) that are printable from water inks for potential applications, among which anticounterfeiting and bar-coding have been selected as a proof-of-concept., This work was financially supported by the MINECO (PID2019-106832RB-I00), MICINN through the Severo Ochoa Program for Centers of Excellence for the FUNFUTURE (CEX2019-000917-S, MDM-2017-0767, and SEV-2017-0706 projects), grant RTI2018-098027-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the Generalitat de Catalunya (2017/SGR/1720 and SGR2017-1289). Z.L. is enrolled in the UAB Ph.D. program and acknowledges the China Scholarship Council (CSC) for his Ph.D. grant (201808310071)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Thermofluorochromic Sensors Based on Conjugated Polymers

  • Bellacanzone, Christian
  • Otaegui, Jaume R.
  • Hernando, Jordi
  • Ruiz Molina, Daniel
  • Roscini, Claudio
Even though thermofluorochromic materials are eternal candidates for their use in multiple applications, they are still limited as they require complex synthetic strategies to accomplish tunable optical properties and/or provide optical changes only over a very wide temperature range. By taking advantage of the high sensitivity of the optical properties of conjugated polymers and oligomers to the external environment, herein phase change material (PCM)-based thermofluorochromic mixtures are created, where the solid-to-liquid transition of the PCM host triggers a sharp fluorescence color change of the dispersed polymers/oligomers. Fluorophore conjugation length, concentration, and PCM nature can be used to vary the spectral properties of the resulting materials along the visible region, covering a large part of the CIE 1931 color space. For the preparation of functional devices, this behavior can be directly transferred to the solid state by soaking or printing cellulose papers with the obtained thermofluorochromic mixtures as well as by structuring them into solid lipid particles that can be dispersed within polymer matrices. The resulting materials show very promising features as thermal sensors and anticounterfeiting labels., This work was supported by Grant Nos. RTI2018-098027-B-C21 and PID2019-106171RB-100 funded by No. MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. SEV-2017-0706 funded by No. MCIN/AEI/10.13039/501100011033. This work was also supported by Generalitat de Catalunya (No. 2017 SGR00465 project). J.R.O. aknowledge the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in Preclinical/Clinical Glioblastoma Treatment: Can Nanoparticles Be of Help?

  • Ruiz Molina, Daniel
  • Mao, Xiaoman
  • Alfonso Triguero, Paula
  • Lorenzo, Julia
  • Bruna, Jordi
  • Yuste, Víctor J.
  • Candiota, Ana Paula
  • Novio, Fernando
Glioblastoma multiforme (GB) is the most aggressive and frequent primary malignant tumor in the central nervous system (CNS), with unsatisfactory and challenging treatment nowadays. Current standard of care includes surgical resection followed by chemotherapy and radiotherapy. However, these treatments do not much improve the overall survival of GB patients, which is still below two years (the 5-year survival rate is below 7%). Despite various approaches having been followed to increase the release of anticancer drugs into the brain, few of them demonstrated a significant success, as the blood brain barrier (BBB) still restricts its uptake, thus limiting the therapeutic options. Therefore, enormous efforts are being devoted to the development of novel nanomedicines with the ability to cross the BBB and specifically target the cancer cells. In this context, the use of nanoparticles represents a promising non-invasive route, allowing to evade BBB and reducing systemic concentration of drugs and, hence, side effects. In this review, we revise with a critical view the different families of nanoparticles and approaches followed so far with this aim., This work was supported by grant RTI2018-098027-B-C21, RTI2018-098027-B-C22, and PID2020-113058GB-I00 funded by MCIN/AEI/10.13039/501100011033, by ERDF A way of making Europe and by PI21/00181 from the Instituto Carlos III. This work was also supported by “Metalfármacos multifuncionales para el diagnóstico y la terapia”, through grant RED2018-102471-T, funded by MCIN/AEI/10.13039/501100011033. The ICN2 and IDIBELL are funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant SEV-2017-0706, funded by MCIN/AEI/10.13039/501100011033. COST is kindly acknowledged for stimulating scientific discussion and financial support via the Cost Action CA 17140 “Cancer nanomedicine from the bench to the bedside”. A.P.C. received funding from the ATTRACT project funded by the EC under Grant Agreement 777222. This work was also supported by the Centro de Investigación Biomédica en Red-Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN [http://www.ciber-bbn.es/en], CB06/01/0010), an initiative of the Instituto de Salud Carlos III (Spain). The PhD program of X.M. was supported by the La Caixa-Severo Ochoa International PhD Fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of modified nano-copper oxide particles on the reaction between nitrocobalamin and ascorbic acid

  • Polaczek, Justina
  • Stochel, Grażyna
  • Ruiz Molina, Daniel
  • Novio, Fernando
  • Eldik, Rudi van
CuO nanoparticles have demonstrated a significant effect on the formation kinetics of nitrosylcobalamin (CblNO) in the reaction between nitrocobalamin (CblNO) and ascorbic acid (Asc). Nanoparticles of CuO were modified by coating with a polydopamine layer (nCuO-pDP) and addition of functional ligands (o-(aminoethyl) polyethylene) (nCuO-pDP-polymer). It was demonstrated that the introduction of modifications improved the stability of the suspension and partially eliminated the aggregation of the nanoparticles. Kinetic measurements showed that the modified nanoparticles of CuO clearly accelerate the reaction between nitrocobalamin (CblNO) and ascorbic acid (Asc) under weakly acidic conditions. The presented research is part of the project ‘Air Pollution versus Autoimmunity: Role of multiphase aqueous Inorganic Chemistry’ that aims at studying the effect of inorganic compounds as a part of particulate matter (PM) on the processes that could affect the course of autoimmune diseases., The authors gratefully acknowledge financial support from the National Science Center in Poland for the Symphony Project no. 2015/16/W/ST5/00005. This work was also supported by grant RTI2018-098027-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intranasal Administration of Catechol-Based Pt(IV) Coordination Polymer Nanoparticles for Glioblastoma Therapy

  • Mao, Xiaoman
  • Calero Pérez, Pilar
  • Montpeyó, David
  • Bruna, Jordi
  • Yuste, Víctor J.
  • Candiota, Ana Paula
  • Lorenzo, Julia
  • Novio, Fernando
  • Ruiz Molina, Daniel
Cisplatin has been described as a potent anticancer agent for decades. However, in the case of glioblastomas, it is only considered a rescue treatment applied after the failure of second-line treatments. Herein, based on the versatility offered by coordination chemistry, we engineered nanoparticles by reaction of a platinum (IV) prodrug and iron metal ions showing in vitro dual pH-and redox-sensitivity, controlled release and comparable cytotoxicity to cisplatin against HeLa and GL261 cells. In vivo intranasal administration in orthotopic preclinical GL261 glioblastoma tumor-bearing mice demonstrated increased accumulation of platinum in tumors, leading in some cases to complete cure and prolonged survival of the tested cohort. This was corroborated by a magnetic resonance imaging follow-up, thus opening new opportunities for intranasal glioblastoma therapies while minimizing side effects. The findings derived from this research showed the potentiality of this approach as a novel therapy for glioblastoma treatment., This work was supported by grant RTI2018-098027-B-C21, RTI2018-098027-B-C22 and PID2020-113058GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. With the support from “Metalfármacos multifuncionales para el diagnóstico y la terapia” with grant RED2018-102471-T funded by MCIN/AEI/10.13039/501100011033. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. COST is kindly acknowledged for stimulating scientific discussion and financial support via the Cost Action CA 17140 “Cancer nanomedicine from the bench to the bedside”. A.P.C. received funding from the ATTRACT project funded by the EC under Grant Agreement 777222. Work also supported by Centro de Investigación Biomédica en Red-Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN [http://www.ciber-bbn.es/en, accessed on 24 March 2022], CB06/01/0010), an initiative of the Instituto de Salud Carlos III (Spain). The PhD program of X.M. was supported by the La Caixa-Severo Ochoa International PhD Fellowship. We acknowledge the UAB Predoctoral training program (14ª Convocatoria PIF-19612, predoctoral fellowships for P.C.-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimodal Fluorescence Switching Materials: One Dye to Have Them All

  • Otaegui, Jaume R.
  • Carrascull-Marín, Aleix
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Off/on, on/off, and on/on fluorescence switching systems find application in a variety of areas, for each of which a particular dye or dye-switch tether must be specifically designed and synthesized. Herein it is demonstrated that such tight requirement can be avoided by using easily prepared mixtures of readily available emitters and phase change materials (PCMs). By proper selection of the PCM and, if needed, additives, thermo- and photothermoresponsive materials showing all classes of emission switching modes can be prepared from a single dye and without chemical modifications. This strategy can be generalized to distinct emitters and, thanks to the facile and versatile printability of dye–PCM mixtures, it can be used for the fabrication of fluorescent patterns showing complex (photo)thermal responses with direct applicability in sensing and anti-counterfeiting., This work was supported by grant RTI2018-098027-B-C21 and PID2019-106171RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF – “A way of making Europe”. The ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa “Centers of Excellence” program, grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. U.A.B. thanks the support from Generalitat de Catalunya (2017 SGR00465 project). J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Validation of a Bioinspired Catechol-Functionalized Pt(IV) Prodrug for Preclinical Intranasal Glioblastoma Treatment

  • Mao, Xiaoman
  • Wu, Shuang
  • Calero Pérez, Pilar
  • Candiota, Ana Paula
  • Alfonso Triguero, Paula
  • Bruna, Jordi
  • Yuste, Víctor J.
  • Lorenzo, Julia
  • Novio, Fernando
  • Ruiz Molina, Daniel
Glioblastoma is the most malignant and frequently occurring type of brain tumors in adults. Its treatment has been greatly hampered by the difficulty to achieve effective therapeutic concentration in the tumor sites due to its location and the blood–brain barrier. Intranasal administration has emerged as an alternative for drug delivery into the brain though mucopenetration, and rapid mucociliary clearance still remains an issue to be solved before its implementation. To address these issues, based on the intriguing properties of proteins secreted by mussels, polyphenol and catechol functionalization has already been used to promote mucopenetration, intranasal delivery and transport across the blood–brain barrier. Thus, herein we report the synthesis and study of complex 1, a Pt(IV) prodrug functionalized with catecholic moieties. This complex considerably augmented solubility in contrast to cisplatin and showed a comparable cytotoxic effect on cisplatin in HeLa, 1Br3G and GL261 cells. Furthermore, preclinical in vivo therapy using the intranasal administration route suggested that it can reach the brain and inhibit the growth of orthotopic GL261 glioblastoma. These results open new opportunities for catechol-bearing anticancer prodrugs in the treatment for brain tumors via intranasal administration., This work was supported by grant RTI2018-098027-B-C21, RTI2018-098027-B-C22 and PID2020-113058GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF’s A way of making Europe as well as with the support from “Metalfármacos multifuncionales para el diagnóstico y la terapia” with grant RED2018-102471-T funded by MCIN/AEI/10.13039/501100011033. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, and grant SEV-2017-0706 is funded by MCIN/AEI/10.13039/501100011033. COST is kindly acknowledged for stimulating scientific discussion and financial support via the Cost Action CA 17140 “Cancer nanomedicine from the bench to the bedside”. A.P.C. received funding from the ATTRACT project funded by the EC under grant agreement 777222. The work was also supported by Centro de Investigación Biomédica en Red-Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN [http://www.ciber-bbn.es/en, accessed on 24 November 2021], CB06/01/0010), an initiative of the Instituto de Salud Carlos III (Spain). The PhD program of X.M. was supported by the La Caixa-Severo Ochoa International PhD Fellowship. We acknowledge the UAB predoctoral training program (14th Convocatoria PIF-19612, predoctoral fellowships for P.C.-P) and China Scholarship Council (predoctoral fellowship 201606990027 for S.W.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catechol-based biomimetic (supra)molecular nanostructures: from synthesis to applications

  • Ruiz Molina, Daniel
Trabajo presentado en el ICIQ Seminar, organizado por el Instituto Catalán de Investigación Química, celebrado en Barcelona el 18 de febrero de 2022., Catechols are found in nature taking part in an astonishing diversity of biochemical processes and functions. Though no exclusive, such versatility may be traced mainly to four properties uniquely found together in the o-dihydroxyaryl chemical function; namely, the establishment of reversible equilibria at moderate redox potentials and pHs; its ability to irreversibly cross-link through complex oxidation mechanisms; its excellent chelating properties, greatly exemplified by, but by no means exclusive, to the binding of Fe(III); and the diverse modes of interaction of the vicinal hydroxyl groups with all kinds of surfaces of remarkably different chemical and physical nature. Thanks to this diversity, catechols can be found either as simple molecular systems, forming part of supramolacular structures, coordinated to different metal ions or as macromolecules mostly fruit of polymerization mechanisms through covalent bonds. Such versatility has allowed catechols to participate in several natural processes and functions that range from the adhesive properties of marine organisms to melanin. According to such astonishing range of functionalities, many scientists worldwide have been studying and mimicking these natural systems to develop new active materials and coatings. For some of them, feasible applications are still in the initial phase, though for some others our society has been taking advantage for many years. A detailed revision of our work in the area is discussed in this Seminar., Supported by grant RTI2018-098027-B-C21from the Spanish Government funds and by the European Regional Development Fund (ERDF). ICN2 is funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days., This work was supported by MINECO/FEDER (RTI2018-098027-B-C21, PID2019-106171RB-100 and PDC2022-133368-I00 projects) and Generalitat de Catalunya (2017 SGR00465 and 2021 PROD 00190 projects). J. R. O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. ICN2 acknowledges support from the Severo Ochoa program (MINECO, SEV-2017-0706) and the CERCA program (Generalitat de Catalunya)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data associated to the article "Multistimuli-responsive smart windows based on paraffin-polymer composites"

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Description of methods used for collection-generation of data: Refractive index measurements: data was obtained using an Abbe refractometer NAR-1T. The temperature was controled with a recirculating thermobath system. 1-bromonaphtalene was used as inmersion oil for PVA film. Transmittance measurements: data was obtained using a Jasco U-770 or an Agilent Cary 60 spectrophotometers. The temperature of the samples was controlled with a Peltier thermostated cell holder, with an external air heating gun (output air temperature of 55 °C), or with a custom-made holder (Sapphire 360) in which the sample of interest was kept between two sapphire windows attached to two cupper sheets, which were connected to a temperature controller. Differential scanning calorimetry measurements: data was obtained using a TA-instruments Q20. A temperature ramp rate of 10 °C min-1 was used for all the samples. Sample irradiation: Irradiation was performed with: (a) a cw laser (irradiation wavelength 830 nm), whose power was modulated using different neutral density filtersand measured with a potentiometer; (b) a solar simulator (100 mW cm-2) placed at 23 cm from the tested material, whose irradiation power was measured with a potenciometer; or (c) sunlight. Temperature measurements on samples: Temperatures were measured with: (a) a thermocouple; or (b)a thermal IR probe. Voltage application to samples: The voltage was applied by means of a power supplier and both the voltage and the current were displaid in the power supplier screen. Electron microscopy data: TEM images were acquired with a TEM JEM-1400 (120 kV) microscope. SEM images were acquired with a FEI Quanta 650 ESEM microscope applying a 5 kV voltage. Size histograms were obtained from the microscopy images using ImageJ software. Stress-strain curves: The tensile test of the films was conducted by means of an Instron 3366 instrument at a speed of 25 mm min-1 and the specimens used had a thickness of 0.2 mm and a width of 15 mm., The dataset shows the experimental data provided in the main text and supporting information of the article "Multistimuli-responsive smart windows based on paraffin-polymer composites": thermal variation of refractive index, thermal and time variation of transmission spectra, electron microscopy images, differential scanning calorymetry thermograms, variation of transmission spectra with light irradiation and voltage application, temperature variation into house models upon sunlight irradiation., Funding sources: Funding agency: MINECO/FEDER. Project number: (RTI2018-098027-B-C21, PID2019-106171RB-I00 and PDC2022-133368-I00). Funding agency: Generalitat de Catalunya. Project number: 2017 SGR00465 and 2021 PROD 00190, Fig 2 Folder, Fig 3 folder, Fig 5 folder, Fig 6 folder, Fig 7 folder, Supporting information folder, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Conductive properties of triphenylene porous coordination polymers

  • Contreras-Pereda, Noemí
  • Ruiz Molina, Daniel
Triphenylene (TP)-based materials have been greatly exploited lately. The compelling optoelectronic characteristics of TP derivatives as a consequence of the aromaticity of moiety allowed the expansion of functional two-dimensional (2D) porous coordination polymers (PCPs). The properties of these materials and performance of their derived functional devices strongly depend on their synthetic approach, defining their morphology, crystallinity, and orientation, among others. Thus in this chapter we will summarize the different synthetic procedures to obtain TP-based 2D PCPs, detailing the morphological characteristics as crystalline domain and orientation obtained with each methodology. We also present a vast range of 2D TP-based PCP structures focusing on their electronic properties as well as emphasizing the effects of intralayer (in-plane) and interlayer (out-of-plane) charge transport on the electrical conductivity of each chemical and crystalline structure. Finally, we will introduce the principal and diverse applications of functional devices including these materials present in the literature., This work was supported by grant RTI2018–098027-B-C21 from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence Programme and funded by the Spanish Research Agency (AEI, Grant No. SEV-2017–0706). N. C.-P. acknowledges the support of fellowship from “laCaixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/ES17/11600012., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017–0706), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering, a case study with a functional coordination polymer

  • Abrishamkar, Afshin|||0000-0001-5957-8067
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons, Ramon|||0000-0003-4273-9084
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromi, Guillem|||0000-0002-0997-9484
  • Aguilà, David|||0000-0001-8707-7833
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • deMello, Andrew J.
  • Rotaru, Aurelian|||0000-0002-8782-7988
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanoscale coordination polymers for medicine and sensors

  • Solorzano Rodriguez, Ruben|||0000-0001-7821-7144
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Novio, Fernando|||0000-0002-1517-3612
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Alibés, Ramon|||0000-0002-7997-2691
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Miniaturization of coordination polymers to the nanoscale represents a unique opportunity to assemble a novel class of highly customizable functional materials that marry the rich diversity, chemistry and properties of coordination complexes to the advantages of nanomaterials. The new structures, which exhibit well-defined and dispersed morphologies, can allow for a proper correlation with their functionality, and therefore, enable the rational design of new generations of these nanostructures targeting specific desired properties. In this chapter we will give a brief introduction to the rational fabrication of such functional nanostructures following different coordination polymerization mechanisms. The novel "smart" nanoscale coordination polymer particles (NCPs) exhibit interesting properties of relevance for different fields and applications, worth to mention nanomedicine and sensors. Herein we make a summary of the main results obtained in both areas that evidence the significance of this novel family of materials. For this, the review has been divided into two main sections. In the first part we revise general methodologies for cargo loading and delivery, including the design of stimuli-responsive systems. In the second section we will review the latest advances in the use of NCPs as chemical sensing platforms. These results open new avenues for all the possible applications that can be derived from the implications of CPPs on surfaces. Finally, a brief introduction to the new research line on 2D-coordination polymers will be outlined.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Shape memory polyurethane microcapsules with active deformation

  • Zhang, Fenghua
  • Zhao, Tianheng|||0000-0002-2705-0329
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Liu, Yanju
  • Roscini, Claudio|||0000-0002-0157-8934
  • Leng, Jinsong|||0000-0001-5098-9871
  • Smoukov, Stoyan|||0000-0003-1738-818X
From smart self-tightening sutures and expandable stents to morphing airplane wings, shape memory structures are increasingly present in our daily life. The lack of methods for synthesizing intricate structures from them on the micron and submicron level, however, is stopping the field from developing. In particular, the methods for the synthesis of shape memory polymers (SMPs) and structures at this scale and the effect of new geometries remain unexplored. Here, we describe the synthesis of shape memory polyurethane (PU) capsules accomplished by interfacial polymerization of emulsified droplets. The emulsified droplets contain the monomers for the hard segments, while the continuous aqueous phase contains the soft segments. A trifunctional chemical cross-linker for shape memory PU synthesis was utilized to eliminate creep and improve the recovery ratios of the final capsules. We observe an anomalous dependence of the recovery ratio with the amount of programmed strain compared to previous SMPs. We develop quantitative characterization methods and theory to show that when dealing with thin-shell objects, alternative parameters to quantify recovery ratios are needed. We show that while achieving 94-99% area recovery ratios, the linear capsule recovery ratios can be as low as 70%. This quantification method allows us to convert from observed linear aspect ratios in capsules to find out unrecovered area strain and stress. The hollow structure of the capsules grants high internal volume for some applications (e.g., drug delivery), which benefit from much higher loading of active ingredients than polymeric particles. The methods we developed for capsule synthesis and programming could be easily scaled up for larger volume applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Luminescent silicon-based nanocarrier for drug delivery in colorectal cancer cells

  • Marcelo, Gonçalo A.|||0000-0003-1248-085X
  • Montpeyó, David|||0000-0002-0327-2015
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Oliveira, Elisabete|||0000-0002-8339-4820
Nanocarriers sensitive to exogenous or endogenous stimuli emerged as an attractive alternative to target drug delivery, with inorganic silica mesoporous nanoparticles (MNs) playing a core role in the development of a new generation of non-toxic and tuneable nanocarriers. A sensitive nanovector (NANO1) comprising luminescent silicon quantum dots (SiQDs) and functionalized with MNs was synthesised and loaded with doxorubicin (DOX). NANO1 nanoparticles have a size of 74 ± 10 nm and DOX loading percentages of ca. 43%. As a control sample, a similar nanocarrier (NANO2), without SiQDs, was also synthesised and loaded with DOX. Release profile studies, in PBS, revealed the strong NANO1@DOX pH-dependant behaviour, with a pH 5.0 favouring the release of DOX to percentages of ca. 70%. Cytotoxicity assessments of both free and DOX-loaded nanocarriers were evaluated in human cell lines of colon, revealing both free drug and drug-loaded nanoparticles to be concentration-dependent.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solid Materials with Near-Infrared-Induced Fluorescence Modulation

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Rubirola, Pau
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Solid molecular materials modulating their luminescent properties upon irradiation are typically based on photochromic dyes. Despite these are potentially interesting for applications such as anticounterfeiting, bioimaging, optical data storage, and writable/erasable devices, key features are preventing their use in marketable products: the lack of straightforward strategies to obtain near infrared (NIR) radiation-responding photochromic dyes and the dramatic response modification these molecules suffer in solids. Herein a photochrome-free approach is reported to achieve solid materials whose luminescence modulation is induced by NIR radiation. This strategy is based on the capacity of phase change materials (PCMs) to modify the emission properties of fluorescent dyes upon photothermally induced interconversion between their solid and liquid states. The preparation of several NIR-responsive thermofluorochromic materials of high fatigue resistance and nondestructive readout is illustrated and this approach is extended to different commercially available dyes, taking advantage of distinct fluorescence modulation mechanisms, providing, thus, color tunability. The modulation response is straightforwardly tuned by simply varying the irradiation power density, the gold nanoshell concentration, and/or the PCM type. This tunability allows to accomplish NIR-activated multistate thermofluorochromic materials and fast/slow/irreversible responses in NIR-writings/drawings of good spatial resolution, which can be of interest for barcodings, anticounterfeiting technologies and (re)writable devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly transparent photochromic films with a tunable and fast solution-like response

  • Torres-Pierna, Héctor|||0000-0002-4345-0349
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
The increasing interest towards photochromic films and their practical applications is driving researchers in the continuous design and synthesis of novel organic photochromic dyes with optimized performances in polymeric matrices. However, whereas their photochromic properties could be readily rationalized in organic liquid solutions, these could not be directly extrapolated to polymers as their performance changes unpredictably upon integration into a solid matrix. This leads to a time-consuming synthetic re-tuning of the dye chemical structure and/or the polymeric medium. To avoid this, herein we report an efficient, straightforward and universal strategy to embed commercial T-type organic photochromic dyes of different nature in a polymeric material without compromising their optimum solution absorption and isomerization kinetics. Our approach is based on trapping emulsified nanodroplets of a hydrophobic solution enclosing the dye into a hydrophilic polymeric matrix. The material is prepared through one single process using commercially available materials, without further modification of the components (the dye and the polymer matrix) nor requiring previous encapsulation steps. The films, which manifest true solution liquid-like and finely tunable photochromic behavior, are also highly transparent, recyclable, and scalable, and show enhanced fatigue resistance, making them highly suitable for different smart glass applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes

  • Pepió, Belén
  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Hayati, Payam|||0000-0002-9312-3143
  • Benmansour Souilamas, Samia|||0000-0002-5482-8554
  • Retailleau, Pascal
  • Morsali, Ali|||0000-0002-1828-7287
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Herein, a new 2-dimensional coordination polymer based on copper (II), {Cu₂(L)(DMF₂)}n, where L stands for 1,2,4,5-benzenetetracarboxylate (complex 1) is synthesized. Interestingly, we demonstrate that both solvent and sonication are relevant in the top-down fabrication of nanostructures. Water molecules are intercalated in suspended crystals of complex 1 modifying not only the coordination sphere of Cu(II) ions but also the final chemical formula and crystalline structure obtaining {[Cu(L)(H₂O)₃]·H₂O}n (complex 2). On the other hand, ultrasound is required to induce the nanostructuration. Remarkably, different morphologies are obtained using different solvents and interconversion from one morphology to another seems to occur upon solvent exchange. Both complexes 1 and 2, as well as the corresponding nanostructures, have been fully characterized by different means such as infrared spectroscopy, x-ray diffraction and microscopy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrasound-assisted exfoliation of a layered 2D coordination polymer with HER electrocatalytic activity

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Moghzi, Faezeh
  • Baselga, Javier
  • Zhong, Haixia
  • Janczak, Jan
  • Soleimannejad, Janet
  • Dong, Renhao
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Large blue rectangular crystals of the 2D layered coordination polymer 1 have been obtained. The interest for this complex is two-fold. First, complex 1 is made of 2D layers packing along the (0-11) direction favored by the presence of lattice and coordinated water molecules. And second, nanostructures that could be derived by delamination are potentially suitable for catalytic purposes. Therefore it represents an excellent example to study the role of interlayer solvent molecules on the ultrasound-assisted delamination of functionally-active 2D metal-organic frameworks in water, a field of growing interest. With this aim, ultrasound-assisted delamination of the crystals was optimized with time, leading to stable nanosheet colloidal water suspensions with very homogeneous dimensions. Alternative bottom-up synthesis of related nanocrystals under ultrasound sonication yielded similar shaped crystals with much higher size dispersions. Finally, experimental results evidence that the nanostructures have higher catalytic activities in comparison to their bulk counterparts, due to larger metallic center exposition. These outcomes confirm that the combination of liquid phase exfoliation and a suitable synthetic design of 2D coordination polymers represents a very fruitful approach for the synthesis of functional nanosheets with an enhancement of catalytic active sites, and in general, with boosted functional properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coordination polymers nanoparticles for bioimaging

  • Suárez García, Salvio|||0000-0002-4156-0579
  • Solorzano Rodriguez, Ruben|||0000-0001-7821-7144
  • Novio, Fernando|||0000-0002-1517-3612
  • Alibés, Ramon|||0000-0002-7997-2691
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Early diagnosis of patient diseases is subjected to the appropriate use of bioimaging techniques. For this reason, the development of contrast agents that improve and enhance the response of current clinical imaging practices is a pressing concern. Non-invasive bioimaging techniques most often need specific probes to follow and measure biological routes in living systems. These molecular imaging agents must exhibit: I) a remarkable contrast effect, i.e. a high signal-to-noise ratio under real physiological conditions, II) pronounced in vivo stability under the effect of numerous enzymes or proteases present in serum or targeted tissue equilibrated with a fast clearance from healthy organs and III) low cost and eco-friendly production. To overcome current drawbacks that hindrance the full development of the different bioimaging techniques, several groups are exploring nanoparticles as contrast agents. In this scenario, coordination polymer nanoparticles have emerged as a handy platform offering predesigned unique advantages thanks to their chemical flexibility, structural diversity and tailoring skills. Indeed, these systems reveal high metal cargos, low toxicity and multifunctional character by adequately selecting the combination of metal ions and ligands. Moreover, in a reminiscent way of organic polymeric nanoparticles, coordination polymer nanoparticles have also demonstrated its ability to encapsulate therapeutic-active molecules, thus combining diagnostic and therapeutic functionalities, the so-called Theranostic nanomedicine. For all these reasons, the use of this family of nanoparticles as imaging contrast agents has attracted broad interest over the last years with numerous examples being reported. Herein, we review main accomplishments in the area grouped according to the used technology, including magnetic resonance imaging, computed tomography, optical imaging, radioimaging or photoacoustic imaging.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Encapsulation and sedimentation of nanomaterials through complex coacervation

  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Ayala Garcia, Alex
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
Hypothesis: Nanoparticles removal from seawage water is a health and environmental challenge, due to the increasing use of these materials of excellent colloidal stability. Herein we hypothesize to reach this objective through complex coacervation, a straightforward, low-cost process, normally accomplished with non-toxic and biodegradable macromolecules. Highly dense polymer-rich colloidal droplets (the coacervates) obtained from a reversible charge-driven phase separation, entrap suspended nanomaterials, allowing their settling and potential recovery. Experiments: In this work we apply this process to highly stable aqueous colloidal dispersions of different surface charge, size, type and state (solid or liquid). We systematically investigate the effects of the biopolymers excess and the nanomaterials concentration and charge on the encapsulation and sedimentation efficiency and rate. This strategy is also applied to real laboratory water-based wastes. Findings: Long-lasting colloidal suspensions are succesfully destabilized through coacervate formation, which ensures high nanomaterials encapsulation efficiencies (~85%), payloads and highly tranparent supernatants (%T ~90%), within two hours. Lower polymer excess induces faster clearance and less sediments, while preserving effective nanomaterials removal. Preliminary experiments also validate the method for the clearance of real water residuals, making complex coacervation a promising scalable, low-cost and ecofriendly alternative to concentrate, separate or recover suspended micro/nanomaterials from aqueous sludges.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid metal-phenol nanoparticles with polydopamine-like coating for PET/SPECT/CT imaging

  • Suárez García, Salvio|||0000-0002-4156-0579
  • Esposito, Tullio V. F.
  • Neufeld-Peters, Jenna
  • Bergamo, Marta
  • Yang, Hua
  • Saatchi, Katayoun|||0000-0002-5372-6791
  • Schaffer, Paul|||0000-0002-6392-8792
  • Häfeli, Urs O.|||0000-0003-0671-4509
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Rodriguez Rodriguez, Cristina|||0000-0002-3313-4422
  • Novio, Fernando|||0000-0002-1517-3612
The validation of metal-phenolic nanoparticles (MPNs) in preclinical imaging studies represents a growing field of interest due to their versatility in forming predesigned structures with unique properties. Before MPNs can be used in medicine, their pharmacokinetics must be optimized so that accumulation in nontargeted organs is prevented and toxicity is minimized. Here, we report the fabrication of MPNs made of a coordination polymer core that combines In(III), Cu(II), and a mixture of the imidazole 1,4-bis(imidazole-1-ylmethyl)-benzene and the catechol 3,4-dihydroxycinnamic acid ligands. Furthermore, a phenolic-based coating was used as an anchoring platform to attach poly(ethylene glycol) (PEG). The resulting MPNs, with effective hydrodynamic diameters of around 120 nm, could be further derivatized with surface-embedded molecules, such as folic acid, to facilitate in vivo targeting and multifunctionality. The prepared MPNs were evaluated for in vitro plasma stability, cytotoxicity, and cell internalization and found to be biocompatible under physiological conditions. First, biomedical evaluations were then performed by intrinsically incorporating trace amounts of the radioactive metals 111In or 64Cu during the MPN synthesis directly into their polymeric matrix. The resulting particles, which had identical physicochemical properties to their nonradioactive counterparts, were used to perform in vivo single-photon emission computed tomography (SPECT) and positron emission tomography (PET) in tumor-bearing mice. The ability to incorporate multiple metals and radiometals into MPNs illustrates the diverse range of functional nanoparticles that can be prepared with this approach and broadens the scope of these nanoconstructs as multimodal preclinical imaging agents.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Antitumour activity of coordination polymer nanoparticles

  • Suárez García, Salvio|||0000-0002-4156-0579
  • Solorzano Rodriguez, Ruben|||0000-0001-7821-7144
  • Alibés, Ramon|||0000-0002-7997-2691
  • Busqué, Félix|||0000-0001-7566-4264
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Nanoscale coordination polymers (NCPs) have fascinated researchers over the last years. Their intrinsic theranostic properties of metal ions and organic ligands, the encapsulation of several drugs/biomolecules with excellent yields and the surface functionalisation, enhancing their biocompatibility and targeting, have remarkably impacted in prospective drug delivery alternatives in medicine. Moreover, the properties and characteristics of these nanoparticles (NPs) can be fine-tuned thanks to the synthetic flexibility of coordination chemistry. For all these reasons, the number of examples published has grown exponentially over the last years, embracing different disciplines such as molecular electronics, sensors or nanomedicine, among others. Specifically, significant advances in antitumoural applications are reported, one of the areas where this novel family of NPs has experienced a considerable advance. NCPs have accomplished a high sophistication degree and efficiency as theranostic nanoplatforms (i.e., drug delivery carriers and bioimaging probes) with long residence time in the bloodstream, targeting capacities and remarkable cellular internalisation. In this review, an introduction emphasizing the advantages of NPs for cancer treatment is included. Later on, the most representative examples of NCPs for antitumoural applications are described grouped into six mean representative areas: i) encapsulation approaches, ii) stimuli-responsive NCPs, iii) metal chemotherapy, iv) photodynamic therapy (PDT), v) unconventional therapeutic approaches and vi) theranostics. Particular emphasis is given to understand the encapsulation/release properties of these particles at the nanoscale and their interaction with biological environments, highlighting any limitation and challenges that these systems are facing from a clinical translation perspective and envisioning possible future trends and areas that will deserve further attention for the following years.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bioinspired theranostic coordination polymer nanoparticles for intranasal dopamine replacement in parkinson's disease

  • Garcia-Pardo, Javier|||0000-0001-9179-6371
  • Novio, Fernando|||0000-0002-1517-3612
  • Nador, Fabiana|||0000-0003-2502-0430
  • Cavaliere, Ivana
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Candiota Silveira, Ana Paula|||0000-0002-1523-6505
  • Romero-Gimenez, Jordi
  • Rodríguez-Galván, Beatriz
  • Bové, Jordi|||0000-0002-2529-205X
  • Vila Bover, Miquel|||0000-0002-1352-989X
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Dopamine (DA) is one of the main neurotransmitters found in the central nervous system and has a vital role in the function of dopaminergic (DArgic) neurons. A progressive loss of this specific subset of cells is one of the hallmarks of age-related neurodegenerative disorders such as Parkinson's disease (PD). Symptomatic therapy for PD has been centered in the precursor l-DOPA administration, an amino acid precursor of DA that crosses the blood-brain barrier (BBB) while DA does not, although this approach presents medium- to long-term side effects. To overcome this limitation, DA-nanoencapsulation therapies are actively being searched as an alternative for DA replacement. However, overcoming the low yield of encapsulation and/or poor biodistribution/bioavailability of DA is still a current challenge. Herein, we report the synthesis of a family of neuromelanin bioinspired polymeric nanoparticles. Our system is based on the encapsulation of DA within nanoparticles through its reversible coordination complexation to iron metal nodes polymerized with a bis-imidazol ligand. Our methodology, in addition to being simple and inexpensive, results in DA loading efficiencies of up to 60%. In vitro, DA nanoscale coordination polymers (DA-NCPs) exhibited lower toxicity, degradation kinetics, and enhanced uptake by BE(2)-M17 DArgic cells compared to free DA. Direct infusion of the particles in the ventricle of rats in vivo showed a rapid distribution within the brain of healthy rats, leading to an increase in striatal DA levels. More importantly, after 4 days of nasal administrations with DA-NCPs equivalent to 200 μg of the free drug per day, the number and duration of apomorphine-induced rotations was significantly lower from that in either vehicle or DA-treated rats performed for comparison purposes. Overall, this study demonstrates the advantages of using nanostructured DA for DA-replacement therapy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis and Validation of a Bioinspired Catechol-Functionalized Pt(IV) Prodrug for Preclinical Intranasal Glioblastoma Treatment

  • Mao, Xiaoman
  • Wu, Shuang|||0000-0001-7618-5476
  • Calero-Perez, Pilar|||0000-0001-9370-3757
  • Candiota Silveira, Ana Paula|||0000-0002-1523-6505
  • Alfonso Triguero, Paula|||0000-0002-6554-5656
  • Bruna, Jordi|||0000-0001-6895-5047
  • Yuste, Victor José|||0000-0001-5322-9261
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Glioblastoma is the most malignant and frequently occurring type of brain tumors in adults. Its treatment has been greatly hampered by the difficulty to achieve effective therapeutic concentration in the tumor sites due to its location and the blood-brain barrier. Intranasal administration has emerged as an alternative for drug delivery into the brain though mucopenetration, and rapid mucociliary clearance still remains an issue to be solved before its implementation. To address these issues, based on the intriguing properties of proteins secreted by mussels, polyphenol and catechol functionalization has already been used to promote mucopenetration, intranasal delivery and transport across the blood-brain barrier. Thus, herein we report the synthesis and study of complex 1, a Pt(IV) prodrug functionalized with catecholic moieties. This complex considerably augmented solubility in contrast to cisplatin and showed a comparable cytotoxic effect on cisplatin in HeLa, 1Br3G and GL261 cells. Furthermore, preclinical in vivo therapy using the intranasal administration route suggested that it can reach the brain and inhibit the growth of orthotopic GL261 glioblastoma. These results open new opportunities for catechol-bearing anticancer prodrugs in the treatment for brain tumors via intranasal administration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Intranasal Administration of Catechol-Based Pt(IV) Coordination Polymer Nanoparticles for Glioblastoma Therapy

  • Mao, Xiaoman
  • Calero-Perez, Pilar|||0000-0001-9370-3757
  • Montpeyó, David|||0000-0002-0327-2015
  • Bruna, Jordi|||0000-0001-6895-5047
  • Yuste, Victor José|||0000-0001-5322-9261
  • Candiota Silveira, Ana Paula|||0000-0002-1523-6505
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Cisplatin has been described as a potent anticancer agent for decades. However, in the case of glioblastomas, it is only considered a rescue treatment applied after the failure of second-line treatments. Herein, based on the versatility offered by coordination chemistry, we engineered nanoparticles by reaction of a platinum (IV) prodrug and iron metal ions showing in vitro dual pH- and redox-sensitivity, controlled release and comparable cytotoxicity to cisplatin against HeLa and GL261 cells. In vivo intranasal administration in orthotopic preclinical GL261 glioblastoma tumor-bearing mice demonstrated increased accumulation of platinum in tumors, leading in some cases to complete cure and prolonged survival of the tested cohort. This was corroborated by a magnetic resonance imaging follow-up, thus opening new opportunities for intranasal glioblastoma therapies while minimizing side effects. The findings derived from this research showed the potentiality of this approach as a novel therapy for glioblastoma treatment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multimodal Fluorescence Switching Materials, One Dye to Have Them All

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
  • Carrascull-Marín, Aleix
Off/on, on/off, and on/on fluorescence switching systems find application in a variety of areas, for each of which a particular dye or dye-switch tether must be specifically designed and synthesized. Herein it is demonstrated that such tight requirement can be avoided by using easily prepared mixtures of readily available emitters and phase change materials (PCMs). By proper selection of the PCM and, if needed, additives, thermo- and photothermoresponsive materials showing all classes of emission switching modes can be prepared from a single dye and without chemical modifications. This strategy can be generalized to distinct emitters and, thanks to the facile and versatile printability of dye-PCM mixtures, it can be used for the fabrication of fluorescent patterns showing complex (photo)thermal responses with direct applicability in sensing and anti-counterfeiting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photoactivable Ruthenium-Based Coordination Polymer Nanoparticles for Light-Induced Chemotherapy

  • Zhang, Junda|||0000-0001-8483-2928
  • Ramu, Vadde|||0000-0003-0726-6920
  • Zhou, Xue-Quan
  • Frias, Carolina
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Bonnet, Sylvestre|||0000-0002-5810-3657
  • Roscini, Claudio|||0000-0002-0157-8934
  • Novio, Fernando|||0000-0002-1517-3612
Green light photoactive Ru-based coordination polymer nanoparticles (CPNs), with chemical formula [[Ru(biqbpy)](bis)](PF) (biqbpy = 6,6'-bis[N-(isoquinolyl)-1-amino]-2,2'-bipyridine; bis = bis(imidazol-1-yl)-hexane), were obtained through polymerization of the trans-[Ru(biqbpy)(dmso)Cl]Cl complex (Complex 1) and bis bridging ligands. The as-synthesized CPNs (50 ± 12 nm diameter) showed high colloidal and chemical stability in physiological solutions. The axial bis(imidazole) ligands coordinated to the ruthenium center were photosubstituted by water upon light irradiation in aqueous medium to generate the aqueous substituted and active ruthenium complexes. The UV-Vis spectral variations observed for the suspension upon irradiation corroborated the photoactivation of the CPNs, while High Performance Liquid Chromatography (HPLC) of irradiated particles in physiological media allowed for the first time precisely quantifying the amount of photoreleased complex from the polymeric material. In vitro studies with A431 and A549 cancer cell lines revealed an 11-fold increased uptake for the nanoparticles compared to the monomeric complex [Ru(biqbpy)(N-methylimidazole)](PF) (Complex 2). After irradiation (520 nm, 39.3 J/cm 2), the CPNs yielded up to a two-fold increase in cytotoxicity compared to the same CPNs kept in the dark, indicating a selective effect by light irradiation. Meanwhile, the absence of 1 O production from both nanostructured and monomeric prodrugs concluded that light-induced cell death is not caused by a photodynamic effect but rather by photoactivated chemotherapy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Gossypol Treatment Restores Insufficient Apoptotic Function of DFF40/CAD in Human Glioblastoma Cells

  • Martínez-Escardó, Laura|||0000-0003-2979-4804
  • Alemany Martí, Montserrat|||0000-0002-7039-4186
  • Sanchez Osuna, Maria
  • Sánchez Chardi, Alejandro|||0000-0002-8789-1883
  • Roig-Martínez, Meritxell
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Vidal, Noemí|||0000-0002-2852-6667
  • Plans, Gerard
  • Majos, Carles|||0000-0003-0468-5150
  • Ribas, Judit|||0000-0003-0834-2577
  • Baltrons Soler, Ma. Antònia|||0000-0002-4360-327X
  • Bayascas Ramírez, José Ramón|||0000-0002-6096-2151
  • Barcia, Carlos|||0000-0003-0976-4245
  • Bruna, Jordi|||0000-0001-6895-5047
  • Yuste, Victor José|||0000-0001-5322-9261
Human glioblastoma (GBM) cells are particularly resistant to nuclear fragmentation upon cytotoxic insult. To date, nuclear disassembly is the biological point-of-no-return of the apoptotic process. The injured cell that does not go beyond this point goes into a failed apoptosis and has potential for recovery. Nuclear disassembly is governed by caspases and, ultimately, by DFF40/CAD endonuclease. GBM cells express low levels of DFF40/CAD protein. Our aim was to assess whether this endonuclease could be activated to facilitate nuclear fragmentation in GBM cells. We revealed that GBM cells can activate their nuclear pool of DFF40/CAD in a caspase-dependent manner when treated with gossypol. Gossypol enabled DFF40/CAD assembly into high-order structures, facilitating nuclear dismantling. The identification of such compounds, pushing cells toward the point-of-no-return of apoptosis, will provide new tools to hamper the recovery of injured cells, slowing down tumor progression. Glioblastoma (GBM) is a highly aggressive brain tumor and almost all patients die because of relapses. GBM-derived cells undergo cell death without nuclear fragmentation upon treatment with different apoptotic agents. Nuclear dismantling determines the point-of-no-return in the apoptotic process. DFF40/CAD is the main endonuclease implicated in apoptotic nuclear disassembly. To be properly activated, DFF40/CAD should reside in the cytosol. However, the endonuclease is poorly expressed in the cytosol and remains cumulated in the nucleus of GBM cells. Here, by employing commercial and non-commercial patient-derived GBM cells, we demonstrate that the natural terpenoid aldehyde gossypol prompts DFF40/CAD-dependent nuclear fragmentation. A comparative analysis between gossypol- and staurosporine-treated cells evidenced that levels of neither caspase activation nor DNA damage were correlated with the ability of each compound to induce nuclear fragmentation. Deconvoluted confocal images revealed that DFF40/CAD was almost completely excluded from the nucleus early after the staurosporine challenge. However, gossypol-treated cells maintained DFF40/CAD in the nucleus for longer times, shaping a ribbon-like structure piercing the nuclear fragments and building a network of bridged masses of compacted chromatin. Therefore, GBM cells can fragment their nuclei if treated with the adequate insult, making the cell death process irreversible.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable Thermofluorochromic Sensors Based on Conjugated Polymers

  • Bellacanzone, Christian|||0000-0002-1986-6440
  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
Even though thermofluorochromic materials are eternal candidates for their use in multiple applications, they are still limited as they require complex synthetic strategies to accomplish tunable optical properties and/or provide optical changes only over a very wide temperature range. By taking advantage of the high sensitivity of the optical properties of conjugated polymers and oligomers to the external environment, herein phase change material (PCM)-based thermofluorochromic mixtures are created, where the solid-to-liquid transition of the PCM host triggers a sharp fluorescence color change of the dispersed polymers/oligomers. Fluorophore conjugation length, concentration, and PCM nature can be used to vary the spectral properties of the resulting materials along the visible region, covering a large part of the CIE 1931 color space. For the preparation of functional devices, this behavior can be directly transferred to the solid state by soaking or printing cellulose papers with the obtained thermofluorochromic mixtures as well as by structuring them into solid lipid particles that can be dispersed within polymer matrices. The resulting materials show very promising features as thermal sensors and anticounterfeiting labels.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoresponsive multicolor-emissive materials based on solid lipid nanoparticles

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Latterini, Loredana|||0000-0002-1021-9423
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Despite the recent advances in the field of thermofluorochromism, the fabrication of thermoresponsive multicolor-emissive materials in a simple, low-cost and versatile manner still remains a challenge. Herein we accomplish this goal by expanding the concept of matrix-induced thermofluorochromism, where a sudden two-state variation of dyes' emission is promoted by the solid-liquid transition of a surrounding phase change material (e.g., paraffins). We demonstrate that this behavior can be transferred to the nanoscale by the synthesis of dye-loaded solid lipid nanoparticles, different types of which can then be combined into a single platform to obtain multicolor thermofluorochromism using a single type of emitter. Because of the reduced dimensions of these particles, they can be utilized to prepare transparent nanocomposites and inkjet-printed patterns showing complex thermoresponsive luminescence signals and applications ranging from smart displays to thermal sensing and high-security anti-counterfeiting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conductive properties of triphenylene MOFs and COFs

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Triphenylene (TP) based materials have experienced a great expansion in the latest years. TP molecules have interesting optoelectronic properties, arising from the aromatic core, which have been exploited in functional two-dimensional (2D) Metal-Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) aside other organic polymers. In this review we summarize synthetic approaches of TP-based 2D MOFs and COFs emphasizing on the resulting morphology, crystalline domains and orientation, proven to have great impact on the properties and performance of these materials in functional devices. Specifically, we report a detailed description on the different TP-based 2D structures detailing the influence of the chemical and crystalline structure on the electronic properties, specially the in-plane and out-of-plane contribution to the electrical conductivity. Finally, we give also attention and present several examples of functional devices made out with these electronic materials with great impact in the literature as well as in future technological applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Advances in preclinical/clinical glioblastoma treatment, can nanoparticles be of help?

  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Mao, Xiaoman
  • Alfonso Triguero, Paula|||0000-0002-6554-5656
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Bruna, Jordi|||0000-0001-6895-5047
  • Yuste, Victor José|||0000-0001-5322-9261
  • Candiota Silveira, Ana Paula|||0000-0002-1523-6505
  • Novio, Fernando|||0000-0002-1517-3612
Glioblastoma multiforme (GB) is the most aggressive and frequent primary malignant tumor in the central nervous system (CNS), with unsatisfactory and challenging treatment nowadays. Current standard of care includes surgical resection followed by chemotherapy and radiotherapy. However, these treatments do not much improve the overall survival of GB patients, which is still below two years (the 5-year survival rate is below 7%). Despite various approaches having been followed to increase the release of anticancer drugs into the brain, few of them demonstrated a significant success, as the blood brain barrier (BBB) still restricts its uptake, thus limiting the therapeutic options. Therefore, enormous efforts are being devoted to the development of novel nanomedicines with the ability to cross the BBB and specifically target the cancer cells. In this context, the use of nanoparticles represents a promising non-invasive route, allowing to evade BBB and reducing systemic concentration of drugs and, hence, side effects. In this review, we revise with a critical view the different families of nanoparticles and approaches followed so far with this aim.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water-stable carborane-based Eu3+/Tb3+metal-organic frameworks for tunable time-dependent emission color and their application in anticounterfeiting bar-coding

  • Li, Zhen|||0000-0002-8497-7497
  • Núñez, Rosario|||0000-0003-4582-5148
  • Light, Mark E.|||0000-0002-0585-0843
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Teixidor, Francesc|||0000-0002-3010-2417
  • Viñas, Clara|||0000-0001-5000-0277
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
  • Giner Planas, José|||0000-0002-1648-2169
Luminescent lanthanide metal-organic frameworks (Ln-MOFs) have been shown to exhibit relevant optical properties of interest for practical applications, though their implementation still remains a challenge. To be suitable for practical applications, Ln-MOFs must be not only water stable but also printable, easy to prepare, and produced in high yields. Herein, we design and synthesize a series of mCB-EuyTb1-y (y = 0-1) MOFs using a highly hydrophobic ligand mCBL1: 1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane. The new materials are stable in water and at high temperature. Tunable emission from green to red, energy transfer (ET) from Tb3+ to Eu3+, and time-dependent emission of the series of mixed-metal mCB-EuyTb1-y MOFs are reported. An outstanding increase in the quantum yield (QY) of 239% of mCB-Eu (20.5%) in the mixed mCB-Eu0.1Tb0.9 (69.2%) is achieved, along with an increased and tunable lifetime luminescence (from about 0.5 to 10 000 μs), all of these promoted by a highly effective ET process. The observed time-dependent emission (and color), in addition to the high QY, provides a simple method for designing high-security anticounterfeiting materials. We report a convenient method to prepare mixed-metal Eu/Tb coordination polymers (CPs) that are printable from water inks for potential applications, among which anticounterfeiting and bar-coding have been selected as a proof-of-concept.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of modified nano-copper oxide particles on the reaction between nitrocobalamin and ascorbic acid

  • Polaczek, Justyna
  • Stochel, Grażyna
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Novio, Fernando|||0000-0002-1517-3612
  • van Eldik, Rudi
CuO nanoparticles have demonstrated a significant effect on the formation kinetics of nitrosylcobalamin (CblNO) in the reaction between nitrocobalamin (CblNO) and ascorbic acid (Asc). Nanoparticles of CuO were modified by coating with a polydopamine layer (nCuO-pDP) and addition of functional ligands (o-(aminoethyl) polyethylene) (nCuO-pDP-polymer). It was demonstrated that the introduction of modifications improved the stability of the suspension and partially eliminated the aggregation of the nanoparticles. Kinetic measurements showed that the modified nanoparticles of CuO clearly accelerate the reaction between nitrocobalamin (CblNO) and ascorbic acid (Asc) under weakly acidic conditions. The presented research is part of the project 'Air Pollution versus Autoimmunity: Role of multiphase aqueous Inorganic Chemistry' that aims at studying the effect of inorganic compounds as a part of particulate matter (PM) on the processes that could affect the course of autoimmune diseases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Roadmap on nanomedicine for the central nervous system

  • Ciofani, Gianni|||0000-0003-1192-3647
  • Campisi, Marco
  • Mattu, Clara
  • Kamm, Roger D.|||0000-0002-7232-304X
  • Chiono, Valeria|||0000-0003-2067-7732
  • Raynold, Aji Alex Moothedathu
  • Freitas, João S.
  • Redolfi Riva, Eugenio
  • Micera, Silvestro|||0000-0003-4396-8217
  • Pucci, Carlotta
  • Novio, Fernando|||0000-0002-1517-3612
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Sierri, Giulia
  • Re, Francesca
  • Wunderlich, Hannah
  • Kumari, Prachi
  • Kozielski, Kristen L.|||0000-0003-3504-2318
  • Chami, Mounia|||0000-0003-1498-7187
  • Marino, Attilio
  • Ferreira, Lino|||0000-0001-8985-9302
In recent years, a great deal of effort has been undertaken with regards to treatment of pathologies at the level of the central nervous system (CNS). Here, the presence of the blood-brain barrier acts as an obstacle to the delivery of potentially effective drugs and makes accessibility to, and treatment of, the CNS one of the most significant challenges in medicine. In this Roadmap article, we present the status of the timeliest developments in the field, and identify the outstanding challenges and opportunities that exist. The format of the Roadmap, whereby experts in each discipline share their viewpoint and present their vision, reflects the dynamic and multidisciplinary nature of this research area, and is intended to generate dialogue and collaboration across traditional subject areas. It is stressed here that this article is not intended to act as a comprehensive review article, but rather an up-to-date and forward-looking summary of research methodologies pertaining to the treatment of pathologies at the level of the CNS.