Pasar al contenido principal

FISICA CON NEUTRONES, INSTRUMENTACION NUCLEAR Y DESARROLLOS PARA HADRONTERAPIA EN EL CNA E INSTALACIONES INTERNACIONALES

PID2021-123879OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

First Tests of an Opto-Electro-Mechanical System for 2D Dose Analysis in Low Energy Proton Irradiated Films

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Karkour, Nabil|||0000-0002-1153-7706
  • Alaphilippe, V.
  • Crepin, D.
  • Jiménez-Ramos, M.C.|||0000-0001-7109-1040
  • García López, Javier|||0000-0003-4107-4383
  • Espino, J.M.
  • Pascual-Alvarez, D.
  • Riera-Llobet, Carla|||0000-0002-9037-1539
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Gibelin, L.
  • Linget, D.
  • Guardiola, C.
This work presents a 2D dosimetry analysis with a new micro-opto-electro-mechanical system of radiochromic films irradiated with a low energy proton beam. The new system is based on a 5 X 10 matrix of photodetectors controlled by both an in-house electronic circuit and a graphical user interface, which allows direct optical density measurements. We have investigated the performance of this 2D readout system using Gafchromic EBT3 films. The results were compared with those obtained using a standard analysis method based on a flat-bed scanner, and the results showed the feasibility of this system for 2D dose map evaluation. To the best of the authors' knowledge, this is the first time that a two-dimensional micro-opto-electro-mechanical system has been used to analyze radiochromic films irradiated with low-energy protons. We intend to develop a portable 2D dosimetry tool that provides dose maps to speed up the reading of radiochromic films in radiotherapy.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

  • Sanchez-Perez, M.
  • Rojas, T.C.
  • Fernández de los Reyes, Daniel
  • Ferrer, F.J.
  • Farchado, M.
  • Morales, A.
  • Escobar-Galindo, Ramón
  • Sanchez-Lopez, J.C.
The effect of applying a negative bias during deposition of a previously designed multilayer solar selective absorber coating was studied on two types of substrates (316L stainless steel and Inconel 625). The solar selective coating is composed of different chromium aluminum nitride layers deposited using a combination of radiofrequency (RF), direct current (DC), and high-power impulse magnetron sputtering (HiPIMS) technologies. The chemical composition is varied to generate an infrared reflective/absorber layer (with low Al addition and N vacancies) and two CrAlN intermediate layers with medium and high aluminum content (Al/Cr = 0.6 and 1.2). A top aluminum oxide layer (Al2O3) is deposited as an antireflective layer. In this work, a simultaneous DC-pulsed bias (−100 V, 250 kHz) was applied to the substrates in order to increase the film density. The optical performance, thermal stability, and oxidation resistance was evaluated and compared with the performance obtained with similar unbiased coating and a commercial Pyromark paint reference at 600, 700, and 800 °C. The coating remained stable after 200 h of annealing at 600 °C, with solar absorptance (α) values of 93% and 92% for samples deposited on stainless steel and Inconel, respectively, and a thermal emittance ϵ25°C of 18%. The introduction of additional ion bombardment during film growth through bias assistance resulted in increased durability, thermal stability, and working temperature limits compared with unbiased coatings. The solar-to-mechanical energy conversion efficiency at 800 °C was found to be up to 2 times higher than Pyromark at C = 100 and comparable at C = 1000.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth dynamics of nanocolumnar thin films deposited by magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • García-Valenzuela, Aurelio
  • Regodón, Guillermo
  • Ferrer, F. J.
  • Rico, Víctor J.
  • García-Martín, José Miguel
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology of numerous nanocolumnar thin films deposited by the magnetron sputtering technique at oblique geometries and at relatively low temperatures has been analyzed for materials as different as Au, Pt, Ti, Cr, TiO, Al, HfN, Mo, V, WO and W. Despite similar deposition conditions, two characteristic nanostructures have been identified depending on the material: a first one defined by highly tilted and symmetric nanocolumnar structures with a relatively high film density, and a second one characterized by rather vertical and asymmetric nanocolumns, with a much lower film density. With the help of a model, the two characteristic nanostructures have been linked to different growth dynamics and, specifically, to different surface relaxation mechanisms upon the incorporation of gaseous species with kinetic energies above the surface binding energy. Moreover, in the case of Ti, a smooth structural transition between the two types of growths has been found when varying the value of the power used to maintain the plasma discharge. Based on these results, the existence of different surface relaxation mechanisms is proposed, which quantitatively explains numerous experimental results under the same conceptual framework., The authors acknowledge projects PID2020-114270RA-I00, PID2021-126524NB-I00, PID2021-123879OB-C21 and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/ 501100011033, project TED2021-130124A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU /PRTR, projects US-1380977 and US-1381045 funded by Fondo Europeo de Desarrollo Regional (FEDER) and Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía, within Programa Operativo FEDER 2014- 2020, project P18-RT-3480 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020), the H2020-EU.1.2.1-FET OPEN program (Grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). Guillermo Regodón would like to acknowledge funding from the European Comission-NextGenerationEU through the ‘Plan de Recuperación, Transformación y Resiliencia’ from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

  • Sánchez-Pérez, Miriam
  • Rojas, T. Cristina
  • Reyes, Daniel F.
  • Ferrer, F. J.
  • Farchado, Meryem
  • Morales, Ángel
  • Escobar Galindo, R.
  • Sánchez-López, Juan Carlos
The effect of applying a negative bias during deposition of a previously designed multilayer solar selective absorber coating was studied on two types of substrates (316L stainless steel and Inconel 625). The solar selective coating is composed of different chromium aluminum nitride layers deposited using a combination of radiofrequency (RF), direct current (DC), and high-power impulse magnetron sputtering (HiPIMS) technologies. The chemical composition is varied to generate an infrared reflective/absorber layer (with low Al addition and N vacancies) and two CrAlN intermediate layers with medium and high aluminum content (Al/Cr = 0.6 and 1.2). A top aluminum oxide layer (Al2O3) is deposited as an antireflective layer. In this work, a simultaneous DC-pulsed bias (−100 V, 250 kHz) was applied to the substrates in order to increase the film density. The optical performance, thermal stability, and oxidation resistance was evaluated and compared with the performance obtained with similar unbiased coating and a commercial Pyromark paint reference at 600, 700, and 800 °C. The coating remained stable after 200 h of annealing at 600 °C, with solar absorptance (α) values of 93% and 92% for samples deposited on stainless steel and Inconel, respectively, and a thermal emittance ε25°C of 18%. The introduction of additional ion bombardment during film growth through bias assistance resulted in increased durability, thermal stability, and working temperature limits compared with unbiased coatings. The solar-to-mechanical energy conversion efficiency at 800 °C was found to be up to 2 times higher than Pyromark at C = 100 and comparable at C = 1000., The authors acknowledge projects P18-RT-2641 funded by Junta de Andalucía (PAIDI2020) and European Regional Development Funds (EU-FEDER), PID2019-104256RB-I00 and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033, and the University of Seville (VI PPIT-US)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous and pulsed fast neutron beams at the CNA HiSPANoS facility

  • Millán Callado, María de los Ángeles
  • Guerrero, C.
  • Fernández-Martínez, Begoña
  • Gómez-Camacho, Joaquín
  • Macías Martínez, Miguel Ángel
  • Quesada, José Manuel
© 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., The characteristics of the fast neutron beams produced in the HiSPANoS facility at Centro Nacional de Aceleradores (CNA) are presented. The neutrons are generated by deuteron beams from a 3 MV tandem accelerator in either continuous (5 μA) or pulsed (2 ns width, 500 kHz and 4% duty cycle) mode. In this work, the pulsed mode was used in a time-of-flight characterization of the produced neutron beams in terms of yield, flux, energy resolution, and background. The results were then validated through their comparison with previously published data. Quasi-monoenergetic neutron beams between 2 and 6 MeV are produced by means of the H(d,n)He reaction, featuring a neutron yield of 10 n/sr/μC at the target, with an energy resolution of about 7% at 150 cm. Neutron beams with broad energy distributions are produced by deuteron irradiation of thick beryllium and lithium targets, resulting in maximum neutron energies of 10 and 20 MeV, respectively. In this case, the neutron yields are significantly higher, reaching 10 n/sr/μC. On the basis of these results, we consider that the HiSPANoS facility is now fully operational for the usage of fast neutrons by internal and external users of CNA., This work has received funding from the Euratom research and training program 2014–2018 under the grant agreement No 847594 (H2020-Euratom-ARIEL), the Marie Curie actions of the 7th Framework Program under the grant agreement No 334315 (FP7-PEOPLE-NeutANdalus), the Spanish national projects FPA2016-77689-C2-1-R, RTI2018-098117-B-C21, and PID2021-123879OB-C21; and the FEDER Andalucía funds under the project US-1261006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructural evolution and properties of He-charged a-Si coatings prepared by magnetron sputtering

  • Godinho, Vanda
  • Caballero-Hernández, J.
  • Lacroix, Bertrand
  • Ferrer, F. J.
  • Jamon, D.
  • Jiménez de Haro, María del Carmen
  • Fernández, Asunción
The introduction of porosity in nanomaterials via magnetron sputtering in helium atmospheres is an interesting strategy for the design of functional materials. Amorphous silicon coatings, with high concentration of He incorporated in the form of overpressurized nano-bubbles, present modified optical properties in comparison with dense coatings of similar composition. In this work, annealing process in He atmosphere from 300 °C up to 1200 °C is performed to evaluate stability after the release of He from the a-Si:He coatings (thickness ∼1700 nm) and to favor matrix crystallization and defect evolution. The work is focused on these effects on the silicon film and its properties. The composition and microstructural evolution of the coatings annealed to temperatures as high as 1200° were investigated by electron microscopy and X-Ray diffraction. Annealing effects on the optical properties and bandgap of the silicon coatings were evaluated by ellipsometry and UV–Vis spectrometry. Helium release from the coating, densification, defects evolution and ordering due to crystallization have a small effect on the refractive index, but cause a significant change in the material band gap from 1.37 eV to 1.80 eV., This work was supported by the Spanish Ministry of Science and Innovation and Universities under grants nr. PID2021-124439NB-I00 and PID2021-123879OB-C21, the Junta de Andalucía under grant nr. P20-00239. All projects were co-financed by EU FEDER funds. The CSIC is also acknowledged for the grant 202160E029. F.J. Ferrer acknowledges the funding of the University of Seville through the “VI Plan Propio de Investigación y Transferencia de la US” (VI PPIT-US)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Effect of He for the Fabrication of Ne and Ar Gas-Charged Silicon Thin Films as Solid Targets for Spectroscopic Studies

  • Fernández, Asunción
  • Godinho, Vanda
  • Ávila, José
  • Jiménez de Haro, María del Carmen
  • Hufschmidt, D.
  • López-Viejobueno, Jennifer
  • Almanza-Vergara, G. E.
  • Ferrer, F. J.
  • Colaux, Julien L.
  • Lucas, Stephane
  • Asensio, María C.
Sputtering of silicon in a He magnetron discharge (MS) has been reported as a bottom-up procedure to obtain He-charged silicon films (i.e., He nanobubbles encapsulated in a silicon matrix). The incorporation of heavier noble gases is demonstrated in this work with a synergistic effect, producing increased Ne and Ar incorporations when using He-Ne and He-Ar gas mixtures in the MS process. Microstructural and chemical characterizations are reported using ion beam analysis (IBA) and scanning and transmission electron microscopies (SEM and TEM). In addition to gas incorporation, He promotes the formation of larger nanobubbles. In the case of Ne, high-resolution X-ray photoelectron and absorption spectroscopies (XPS and XAS) are reported, with remarkable dependence of the Ne 1s photoemission and the Ne K-edge absorption on the nanobubble's size and composition. The gas (He, Ne and Ar)-charged thin films are proposed as "solid" targets for the characterization of spectroscopic properties of noble gases in a confined state without the need for cryogenics or high-pressure anvils devices. Also, their use as targets for nuclear reaction studies is foreseen., This research was funded by: (i) MICIN/AEI/10.13039/501100011033, FEDER-EU in projects PID2021-124439NB-I00 and PID2021-123879OB-C21; (ii) Junta de Andalucía, FEDER-EU in project P20-00239; (iii) CSIC under grant 202160E029. Authors thank SOLEIL beamtime allocation nr. 20170265. A. Fernández thanks the Spanish Ministry of Education for granting her with a visiting researcher fellowship (PRX-18/0052) at the Univ. Namur. F.J. Ferrer acknowledges the funding of the University of Seville through the grant VI PPIT-US., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neutron activation as benchmark for cross section evaluations: Demonstration through the MACS of 50Cr for nuclear technology applications

  • Pérez-Maroto, Pablo
  • Guerrero, C.
  • Fernández-Martínez, Begoña
  • Casanovas-Hoste, A.
  • Stamati, M. E.
Neutron cross section libraries often differ with each other due to the limited availability of differential cross section data from time-of-flight experiments. These are indeed challenging, requiring state-of-the-art facilities and detectors, as well as an involved data analysis. However, in some cases, an easier alternative can be found in simpler integral experiments, as it is demonstrated herein. The capture cross section of 50Cr plays an important role in nuclear reactors and recent criticality safety benchmarks pointed to an increase of 20%, which has been incorporated in the recent INDEN (2023) evaluated library. In this work we have carried out an epithermal neutron activation measurement on 50Cr at the CNA HiSPANoS facility. The resulting Maxwellian Average Cross Section (MACS) at 30 keV, 37.1(20) mb, provides enough evidence to discard the proposed increase in the cross section. Furthermore, it illustrates the suitability of the activation technique to benchmark cross section evaluations in the epithermal energy region. This can in principle be extended to other reactions (as far as they result in radioactive nuclei) and to the fast neutron range by employing mono-energetic beams from D-D and D-T reactions in similarly simple experiments., This measurement has received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement No 847594 (ARIEL), and from the Spanish national projects RTI2018-098117-B-C21 and PID2021-123879OB-C21. From the UPC side, we would like to acknowledge also Spanish projects PID2019-104714GB-C21 and PID2022-138297NB-C21. The work presented herein is part of the PhD thesis of P. Pérez-Maroto at Universidad de Sevilla, Spain, funded through the FPI national Grant No PRE2019-089678., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modular apparatus for nuclear reactions spectroscopy (MARS): characterization and first application to determine 12C(6Li,4He)14Ng.s nuclear reaction cross sections

  • Garrido Gómez, L.
  • Vegas Díaz, A.
  • Álvarez, M. A. G.
  • Fernández García, J. P.
  • Fernández, B.
  • Ferrer, F. J.
  • López-Aires, D.
This work presents MARS (Modular apparatus for nuclear reactions spectroscopy) and its characterization prior to its first application to measure 6Li+12C nuclear reactions. Measurements were performed at the 3 MV tandem accelerator of the CNA (National Accelerator Center), in Seville, Spain. The 6Li projectiles were accelerated at energies around the 6Li+12C Coulomb barrier (VBcm∼3.0 MeV - center of mass and VBlab∼4.5 MeV - laboratory frame). Using a 6Li2+ beam, we measured at 13 laboratory energies from 4.00 to 7.75 MeV. Thus, we present the excitation function of 12C(6Li,4He)14Ng.s. reaction, at 2 backward angles (110.0∘ and 140.0∘). The projectile dissociation, leading to this reaction, increases with the bombarding energies around the Coulomb barrier. This dissociation is favored at an optimum energy Ebop≥VB + |Qbu|, where VB is the Coulomb barrier of the system, and |Qbu| is the module of Q-value for the 6Li dissociation into 4He+2H. This result corroborates a systematic analysis of weakly bound projectiles reacting on several targets [1]., This work has been funded by the EQC2019-005873-P project, through the Spanish national subprogram for research infrastructure and scientific-technical equipment (national plan R+D+I 2017-2020). Within this framework, MARS has been developed in collaboration with private companies ATI Sistemas S. L. (by a signed contract between ATI Sistemas S. L. and the University of Seville) and CAEN (Costruzioni Apparecchiature Elettroniche Nucleari) SpA providing technical support. This work was partially supported by the Spanish Ministerio de Economía y Competitividad and FEDER funds (PGC2018-096994-B-C21) by the project PAIDI 2020, reference P2001247, funded by the Consejería de Economía, Conocimiento, Empresas y Universidad, Junta de Andalucía (Spain) and “ERDF A way of making Europe”, and the project PID2021-123879OB-C21 (with grant PRE2022-102551) funded by the Spanish Ministerio de Ciencia e Innovación. This work is also part of the project supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (PID2023-146401NB-I00). This work has been developed within the context of IReNA (International Research Network for Nuclear Astrophysics) and IANNA (Ibero-American Network of Nuclear Astrophysics). The authors acknowledge all support and collaboration from IReNA and IANNA (National Science Foundation under Grant No. OISE-1927130). Funding for open access publishing: Universidad de Sevilla/CBUA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing 3He content in magnetron sputtered and implanted targets for nuclear studies

  • Pilotto, E.
  • Ferrer-Fernández, Francisco Javier
  • Akhmadaliev, Shavkat
  • Fernández-Camacho, A.
  • Gadea-Raga, Andrés
  • Camacho-Gómez, Jacquelín
  • Hufschmidt, Dirk
  • Jiménez-de Haro, María del Carmen
  • Masha, Eliana
  • Munnik, F.
  • Osswald, Max
  • Piatti, Diego
  • Skowronski, J.
  • Turkat, Steffen
  • Valiente-Dobón, José Javier
3He targets are a valuable tool in nuclear physics, particularly for studying nuclear structure and dynamics via direct reactions in inverse kinematics. However, they are often prone to degradation under intense beam irradiation and have insufficient 3He content for use with low-intensity exotic beams. In a recent AGATA experiment at LNL, designed to study the astrophysically relevant lifetime of a 15O excited state, two types of 3He targets were tested. One was produced using ion implantation and the other with a novel magnetron sputtering technique, in both cases on Au substrates. Following irradiation with a stable 16O beam, they were characterized using Nuclear Reaction Analysis (NRA) and Elastic Recoil Detection Analysis (ERDA). Results demonstrated that, under the here used fabrication conditions, sputtered targets present a higher 3He content, while implanted ones exhibit thinner profiles. This highlights the possibilities and complementarity of these targets, suggesting their tailored use for future experimental campaigns., Sputtered targets development was supported by the Spanish grant PID2021-124439NB-I00 (cofinanced by EU FEDER). We acknowledge the use of the CLEAR distributed facility funded by Horizon Europe Grant Agreement No 101057511 (EURO-LABS - EUROpean Laboratories for Accelerator Based Sciences), and PID2021-123879OB-C21 and by European Union (ChETEC-INFRA, 101008324). E.M. acknowledges an Alexander von Humboldt postdoctoral fellowship. Work partially supported by MCIN/AEI/10.13039/501100011033, Spain with grants PID2020-118265GB-C4, PID2023-150056NB-C4, PRTR-C17.I01, by Generalitat Valenciana, Spain with grant CIPROM/2022/54, ASFAE/2022/031 and by the EU NextGenerationEU and FEDER funds., Open access funding provided by Università degli Studi di Padova within the CRUI-CARE Agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-like Films via Remote Plasma Deposition

  • Obrero-Pérez, José M.
  • Moreno, Gloria P.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Moscoso, Francisco G.
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Núñez-Gálvez, Fernando
  • Aparicio, Francisco J.
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Material suplementario en disponible en: https://doi.org/10.1021/acsami.5c07264, Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 °C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. Additional reference compact films VO2 films are obtained by a direct RPAVD process using the same precursor and oxygen plasmas in combination with thermal annealing. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings., We thank the projects PID2022-143120OB-I00, TED2021-130916B–I00, PCI2024-153451, and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos Nextgeneration EU, and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). We also thank the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480) and CSIC (ref 202360086). The project leading to this article has also received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Cu thin films prepared by magnetron sputtering using helium as depositing gas

  • Arzac, G. M.
  • López-Viejobueno, Jennifer
  • Calvo, Mauricio E.
  • Ferrer, F. J.
  • Godinho, Vanda
  • Hufschmidt, Dirk
  • Jiménez de Haro, María del Carmen
  • Ramírez-Rico, J.
  • Varela, Francisco
  • Fernández, Asunción
In this work, porous copper thin films were prepared by magnetron sputtering (MS) deposition using helium as the process gas. Electron microscopy techniques were used to study the shape, size, amount and distribution of the pores. Working under direct current (DC) or radiofrequency (RF) conditions, enabled to achieve respectively a dense porous or an open porous columnar microstructure. At the nanoscopic level a characteristic solid-gas nanocomposite structure was also produced in both films. Spherical and faceted nano-bubbles filled with helium, with a size range of 1–22 nm and a uniform distribution across the entire thickness were visualized. RF conditions allowed higher gas loading, achieving up to 6.2 at.% He preferentially occluded in smaller pores. Characterization revealed that the RF-deposited copper (Cu) film is oxidised to a greater depth than the DC-deposited film, forming a thicker copper oxide(s) layer. This phenomenon can be attributed to the open porous nanostructure of the former. The results presented herein improve our understanding of MS deposition of copper with helium as process gas and pave the way for designing a wide range of materials with applications in the field of fusion reactors, (electro)catalysis, photocatalysis, fuel cells, electronics and the fabrication of negative crystals., This research was funded by the Spanish grant MICIN/AEI/10.13039/501100011033, FEDER-EU, project PID2021-124439NB-I00, project PID2021-123879OB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New measurement of 50Cr and 53Cr (n,γ) cross sections at n_TOF: a call for chromium nuclear data revision

  • Pérez-Maroto, Pablo
  • Guerrero, C.
  • Casanovas, A.
  • Fernández, B.
  • Mendoza, E.
  • Alcayne, V.
  • Lerendegui-Marco, J.
  • Domingo Pardo, César
  • Quesada, J. M.
  • Capote, R.
  • Aberle, O.
  • Altieri, S.
  • Amaducci, S.
  • Andrzejewski, J.
  • Babiano-Suarez, V.
  • Bacak, M.
  • Balibrea-Correa, J.
  • Beltrami, C.
  • Bennett, S.
  • Bernardes, A. P.
  • Berthoumieux, E.
  • Beyer, R.
  • Boromiza, M.
  • Bosnar, D.
  • Caamaño, M.
  • Calviño, F.
  • Calviani, M.
  • Cano-Ott, D.
  • Castelluccio, D. M.
  • Cerutti, G.
  • Chasapoglou, S.
  • Chiaveri, E.
  • Colombetti, P.
  • Colonna, N.
  • Console Camprini, P.
  • Cortés, G.
  • Cortés-Giraldo, M. A.
  • Cosentino, L.
  • Cristallo, S.
  • Dellmann, S. F.
  • Diakaki, M.
  • Di Castro, M.
  • Dietz, M,
  • Di Maria, S.
  • Dressler, R.
  • Dupont, E.
  • Durán, I.
  • Eleme, Z.
  • Fargier, S.
  • Fernández-Domínguez, B.
  • Finocchiaro, P.
  • Fiore, S.
  • Furman, V.
  • García-Infantes, F.
  • Gawlik-Ramiega, A.
  • Gervino, G.
  • Gilardoni, S.
  • González-Romero, E.
  • Gunsing, F.
  • Gustavino, C.
  • Heyse, J.
  • Hillman, W.
  • Jenkins, D. G.
  • Jericha, E.
  • Junghans, A.
  • Kadi, Y.
  • Kaperoni, K.
  • Kaur, G.
  • Kimura, A.
  • Knapová, I.
  • Kokkoris, M.
  • Kopatch, Y.
  • Krtička, M.
  • Kyritsis, N.
  • Ladarescu, I.
  • Lederer-Woods, C.
  • Lerner, G.
  • Manna, A.
  • Martínez, T.
  • Masi, A.
  • Massimi, C.
  • Mastinu, P.
  • Mastromarco, M.
  • Maugeri, E. A.
  • Mazzone, A.
  • Mengoni, A.
  • Michalopoulou, V.
  • Milazzo, P. M.
  • Mucciola, R.
  • Murtas, F.
  • Musacchio González, E.
  • Musumarra, A.
  • Negret, A.
  • Patronis, N.
  • Pavón, J. A.
  • Pellegriti, M. G.
  • Pérez de Rada Fiol, A.
  • Perkowski, J.
  • Petrone, C.
  • Pirovano, E.
  • Plaza del Olmo, J.
  • Pomp, S.
  • Porras, I.
  • Praena, J.
  • Reifarth, R.
  • Rochman, D.
  • Romanets, Y.
  • Rubbia, C.
  • Sánchez-Caballero, A.
  • Sabaté-Gilarte, M.
  • Schillebeeckx, P.
  • Schumann, D.
  • Sekhar, A.
  • Smith, A. G.
  • Sosnin, N. V.
  • Stamati, M. E.
  • Sturniolo, A.
  • Tagliente, G.
  • Tarifeño-Saldivia, A.
  • Tarrío, D.
  • Torres-Sánchez, P.
  • Urlass, S.
  • Vagena, E.
  • Valenta, S.
  • Variale, V.
  • Vaz, P.
  • Vecchio, G.
  • Vescovi, D.
  • Vlachoudis, V.
  • Vlastou, R.
  • Wallner, A.
  • Woods, P. J.
  • Wright, T.
  • Zarrella, R.
  • Žugec, P.
50Cr and 53Cr are very relevant in criticality safety benchmarks related to nuclear reactors. The discrepancies of up to 30% between the neutron capture cross section evaluations have an important effect on the kef f and k∞ in criticality benchmarks particularly sensitive to chromium. In this work, the 50,53Cr(n,γ ) cross sections are to be determined between 1 and 100 keV with an 8–10% accuracy following the requirements of the NEA High Priority Request List (HPRL) to solve the current discrepancies. We have measured these reactions by the time-of-flight technique at the EAR1 experimental area of the n_TOF facility, using an array of four C6D6 detectors with very low neutron sensitivity. The highly-enriched samples used are significantly thinner than in previous measurements, thus minimizing the multiple-scattering effects. We have produced, and analysed with the R-matrix analysis code SAMMY, capture yields featuring 33 resonances of 50Cr and 51 of 53Cr with an accuracy between 5% and 9%, hence fulfilling the requirements made by the NEA. The differential and integral cross sections have been compared to previous data and evaluations. The new measured 50,53Cr(n,γ ) cross sections provide a valuable input for upcoming evaluations, which are deemed necessary given that the results presented herein do not support the increase in both cross sections proposed in the recent INDEN evaluation., Funding for open access publishing: Universidad de Sevilla/CBUA. his measurement has received funding from the Euroatom research and training programme 2014-2018 under grant agreement No 847594 (ARIEL), and from the Spanish national projects RTI2018-098117-B-C21, PID2019-104714GB-C22, PID2021-123879 OB-C21 and PID2022-138297NB-C21. This work is also part of the PhD thesis of P. Pérez-Maroto at Universidad de Sevilla, Spain [53], funded through the FPI national Grant No PRE2019-089678. We also acknowledge the National Science Centre, Poland (Grant No. UMO-2021/41/B/ST2/00326)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First Tests of an Opto-Electro-Mechanical System for 2D Dose Analysis in Low Energy Proton Irradiated Films

  • Mena, Silvia
  • Karkour, N.
  • Alaphilippe, V.
  • Crepin, D.
  • Jiménez-Ramos, M. C.
  • López, J. García
  • Espino, J. M.
  • Pascual-Alvarez, D.
  • Riera-Llobet, Carla
  • Muñoz-Berbel, Xavier
  • Guirado, G.
  • Gibelin, L.
  • Linget, D.
  • Guardiola Salmerón, Consuelo
This work presents a 2D dosimetry analysis with a new micro-opto-electro-mechanical system of radiochromic films irradiated with a low energy proton beam. The new system is based on a 5 X 10 matrix of photodetectors controlled by both an in-house electronic circuit and a graphical user interface, which allows direct optical density measurements. We have investigated the performance of this 2D readout system using Gafchromic EBT3 films. The results were compared with those obtained using a standard analysis method based on a flat-bed scanner, and the results showed the feasibility of this system for 2D dose map evaluation. To the best of the authors’ knowledge, this is the first time that a two-dimensional micro-opto-electro-mechanical system has been used to analyze radiochromic films irradiated with low-energy protons. We intend to develop a portable 2D dosimetry tool that provides dose maps to speed up the reading of radiochromic films in radiotherapy., C.G. thanks the Ram\u00F3n y Cajal fellow (RYC2020-030247-I/AEI/10.13039/501100011033), the CSIC\u2019s Proyectos Intramurales Especiales (20225AT008), and the D\u00E9clic actions of pre-maturation (National institute of nuclear and particle physics \u2013 IN2P3/CNRS). N.K. thanks for the financial support of IJCLAB. M.C. Jim\u00E9nez-Ramos acknowledges support to this work through a VI PPIT-US contract. The authors also thank the Ministerio de Ciencia e Innovaci\u00F3n of Spain for financial support through project PID2019-106171RB-I00 (MCIN/AEI/10.13039/501100011033), PID2022-141293OB-I00, and PID2021-123879OB-C21. Besides, through the \u2018Mar\u00EDa de Maeztu Unit of Excelence\u2019 accreditation (CEX2023-001397-M). In addition, the authors thank AGAUR (Generalitat de Catalunya, 2021 SGR 00052). S.M. acknowledges support from the postdoctoral grant Juan de la Cierva JDC2022-048606-I, funding by MCIN/AEI/10.13039/501100011033 and the European Union \u201CNextGenerationEU\u201D/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gamma- and neutron-based radiography for non-destructive testing of additive-manufactured steel samples

  • Cabo-Landeira, Cristina
  • Peñas, Juan
  • Fernández-Martínez, Begoña
  • Guerrero, C.
  • Beceiro-Novo, Saúl
  • Kumi, Harriet
  • Ayyad, Yassid
Conventional X-ray radiography is the current standard for industrial non-destructive testing of metallic parts. However, some limitations arise due to the low penetration depth of X-rays for certain materials or their thickness. This is the case for metal additive manufacturing, where quality control and internal inspection are critical in most applications. In this paper we report the use of a 137Cs gamma source (∼180 MBq) and a 60Co gamma irradiator (∼47 TBq) for gamma radiography and tomography of steel samples from additive manufacturing. A simple experimental device composed of a scintillating screen and a frame-based camera was used to digitally capture the sample images. Internal details were observed with a spatial resolution of 1–3 mm. Similar results were obtained with the same imaging device adapted and utilized for neutron radiography using thermal neutrons from the CNA HiSPANoS facility, which is based on a compact particle accelerator. The results presented show that this simple, flexible solution for different source types, could be implemented through further optimization as a portable and cost-effective system for non-destructive testing. In particular, these techniques could effectively be established as a promising approach for metal additive-manufactured parts testing, This work has received funding from the MICIU/AEI under grant PTQ2023-013080; grants RYC2019-028438-I, CEX2023-001318-M, and PID2021-125995NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the Regional Government of Galicia under the program “Proyectos de excelencia” Grant No. ED431F 2022/13. The operation of the HiSPANoS facility is based on support from the Plan Estatal 2021–2023 project PID2021-123879OB-C21. Partial financial support was also received from company Neutron Insights S.L., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-energy threshold demonstration for dark matter searches in TREX-DM with an 37Ar source produced at CNA HiSPANoS

  • Castel, Juan Francisco
  • Cebrián, Susana
  • Dafni, Theopisti
  • Díez-Ibáñez, David
  • Ezquerro, Álvaro
  • Fernández-Martínez, Begoña
  • Galán, Javier
  • García Pascual, J. A.
  • Guerrero, C.
  • García Irastorza, Igor
  • Luzón, Gloria
  • Margalejo, Cristina
  • Porrón, Jorge
  • Jiménez Puyuelo, María
  • Quintana, Ana
We report on the successful implementation of an 37Ar calibration source in the TREX-DM detector, a high-pressure time projection chamber designed for low-mass dark matter searches. The 37Ar source was produced through fast neutron activation of CaO powder at the HiSPANoS facility of Centro Nacional de Aceleradores (CNA) in Spain, yielding O(1) kBq of activity. Using a novel combined GEM-Micromegas readout system, we successfully detected both characteristic emissions from 37Ar decay (2.82 keV and 270 eV) and achieved unprecedented energy threshold performance in TREX-DM, approaching the single-electron ionization energy of argon., The authors acknowledge support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (ERC-2017-AdG IAXO+, grant agreement No. 788781), from the Agencia Estatal de Investigación (AEI) under the grant agreements PID2021-123879OB-C21 and PID2022-137268NB-C51 funded by MCIN/AEI/10.13039/501100011033/FEDER, as well as funds from “European Union NextGenerationEU/PRTR” (Planes complementarios, Programa de Astrofísica y Física de Altas Energías)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methodology for Assessing Neutron-Induced Effects on Field-Programmable Gate Array Memories

  • Vilas-Bôas, Alexis C.
  • Jiménez Sánchez, Jorge
  • Palomo, Francisco Rogelio
  • Finco, Saulo
  • Guerrero, C.
  • Fernández-Martínez, Begoña
  • Guazzelli, Marcilei A.
This work proposes a methodology to evaluate the robustness of commercial Field-Programmable Gate Arrays (FPGAs) against radiation effects induced by fast neutrons. The automated data acquisition system implemented in this study enables monitoring and characterization of neutron-induced er- rors in the devices. The results allowed us to observe consistently that irradiation with fast neutrons at CNA HiSPANoS produced errors in the FPGA, including Single Event Upsets (SEUs), which affect the implemented control logic, and Single Event Functional Interrupts (SEFIs), leading to a complete loss of data. The proposed approach provides a framework for as- sessing the susceptibility of commercial FPGAs to neutron-in- duced faults and serves as a foundation for future investigations in this field., Authors acknowledge financial and/or structural support from: FAPESP 2023/16053-8, 2022/09131-0, 2018/25225-9, 2020/04867-2, 2019/07764-1; INCT-FNA: 408419/2024-5; CNPq: 150135/2025-4, 404054/2023-4, 408800/2021-6, 301576/2022-0, 30360/2020-9. CPSAE (CTI): 314013/2025-3; Projeto CITAR. Centro Nacional de Aceleradores (CNA), CAPES:88881.690571/2022-01. Universidad de Sevilla, Proyecto PID 2021-123879OB-C21 del Ministerio de Ciencia e Innovación and EC H2020-Euratom research and training programme 2014–2018 under GA 847594 (ARIEL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Figures and data for the paper "Uncertainty band evaluation of optical potentials and differential cross-sections. Application to 8Li + 58Ni elastic scattering". Published in https://arxiv.org/abs/2507.11591

  • Gómez-Camacho, Joaquín
  • Santos, Osvaldo C. B.
Compressed file including the figures, and the relevant data for the paper Uncertainty band evaluation of optical potentials and differential cross-sections. Application to 8Li + 58Ni elastic scattering, Data include extensive calculations of the chi^2 values obtained changing the optical model parameters., European Commission Horizon Europe EURO-LABS- EUROpean Laboratories for Accelerator Based SciencesHorizon Europe Grant Agreement No 101057511, Agencia Estatal de Investigación Fısica con neutrones, instrumentaci´on nuclear y desarrollos para hadronterapia en el CNA e instalaciones internacionales PID2021-123879OB-C21, Fundação de Amparo à Pesquisa do Estado de São Paulo 2021/12254-3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new design of secondary electron detector for low-energy radioactive ion beam

  • Pancin, J.
  • Fernández-Martínez, Begoña
  • Fisichella, M.
  • Frémont, G.
  • Gangnant, P.
  • Goupil, J.
  • Herlant, S.
  • Balasmeh, Y.
  • Berthoumieux, E.
  • Caceres, L.
  • Chakma, R.
  • Doré, D.
  • Drouart, A.
  • Ducret, J. E.
  • Houarner, C.
  • Jacquot, B.
  • Piot, J.
  • Ramos, D.
  • Roger, T.
  • Saillant, F.
  • Savajols, H.
  • Spitaels, C.
  • Stodel, C.
  • Vos̆tinar, M.
  • Wittwer, G.
New facilities like FAIR at GSI or SPIRAL2 at GANIL, will permit to provide radioactive ion beams at low energies (less than 10 MeV per nucleon). Such beams have generally a large emittance, which requires the use of beam tracking detectors to reconstruct the exact trajectories of the nuclei. To reduce the angular and energy straggling that classical beam tracking detectors would generate in the beam due to their thickness, the use of SED (Secondary Electron Detectors) is proposed. In this work, the development and characterization of a low-pressure gaseous detector (around 10 mbar) based on wire chamber, coupled with an emissive foil placed in the beam path, is presented. Such systems are particularly well suited for low-energy radioactive ion beams, where the use of conventional tracking detectors can lead to significant energy loss and angular straggling due to the detector thickness. The performances achievable at very low pressure are excellent since the fast charge collection leads to excellent timing properties as well as high counting rate capabilities, even for a wire chamber. The spatial, temporal and counting rate performances of the final detector were measured both with radioactive source and a 238U beam. Spatial and time resolutions (𝜎) of about 0.7 mm and 150 ps were obtained, respectively, at high counting rates of 20 kHz/cm2 , demonstrating the reliable operation of the proposed detection system and confirming its suitability for beam-tracking applications at next generation radioactive ion beam facilities. A comparison of CF4 and iC4H10 was also performed, including systematic gain measurement, providing new insights concerning the behavior of these gases at very low pressure., Apart from the direct contribution of GANIL laboratory, this work was supported by S3 project that has been funded by the French Research Agency (ANR), through EQUIPEX (EQUIPment of EXcellence) ANR10-EQPX-46, the FEDER (Fond Européen en Développement Economique et Régional) and the CPER (Contrat Plan Etat Région). This work was also supported by the CNRS multipartner NEEDS program. Financial supports from the Spanish Ministry of Economy and Competitiveness (FPA2016-77689-C2-1 R project) and the Spanish Ministry of Science and Innovation (RTI2018-098117-B-C21, PID2021-123879OB-C21 projects) were also obtained., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radiobiology studies of gold nanoparticle-enhanced radiosensitization in proton therapy

  • Fuster-Martínez, Nuria
  • Saucedo-Cuberes, D. H.
  • Jiménez-Ramos, M. C.
  • Esperante Pereira, Daniel
  • Espino, J. M.
  • Fuster, Juan
  • Belén-Aguilar, J. F.
  • González-López, L.
  • Huertas Sánchez, Pablo
  • Jimeno, Sonia
  • Mingarro, I.
  • Pascual, David
  • Suárez-García, D.
  • García-Murria, M. J.
[Background] Approximately 50 % of newly diagnosed cancer patients worldwide receive radiotherapy, most commonly with X-rays. Proton therapy has emerged as a promising alternative, offering complementary advantages over conventional X-rays due to its highly localized energy deposition at the Bragg peak, thereby reducing radiation exposure to surrounding healthy tissues. In recent years, advances in both technology and biomedicine have driven significant progress in proton therapy, with ongoing research aiming to minimize toxicity and long-term side effects while improving patients' quality of life. An emerging research direction investigates the combination of proton therapy with irradiated nanoparticles acting as radiosensitizers. This approach seeks synergistic effects that could further improve therapeutic outcomes. These effects arise from a complex interplay of physical, chemical, and biological mechanisms. Although previous in vitro and in vivo studies report promising radiosensitization effects of nanoparticles, the literature also includes contradictory results, and the underlying mechanisms remain under debate. This highlighting the need for systematic studies under well-controlled irradiation conditions of different nanoparticles and beam parameters, which are often difficult to perform due to the limited availability of particle accelerators and facilities suitably adapted for such experiments., [Purpose] This work investigates the radiosensitizing effect of gold nanoparticles under proton irradiation and optimizes the irradiation setup to enable more efficient and reproducible future experiments., [Methods] HeLa cells were used as the biological model for the radiobiological experiments. Irradiation conditions were optimized by incorporating a Mylar film into the culture plates to maintain a minimal medium volume and ensure rapid post-irradiation coverage. Cells with and without AuNPs were irradiated with 12.6 MeV proton beams. Radiosensitivity was assessed using clonogenic survival assays, and the radiosensitizing effect, together with its associated uncertainty, was quantified. DNA damage analysis was also performed to corroborate the observed effects and explore underlying mechanisms., [Results] The radiobiology experiments confirmed and quantified a significant radiosensitizing effect of gold nanoparticles (AuNPs) on HeLa cells at doses from 4 Gy, with Sensitization Enhancement Ratio (SER) values of 1.53 ± 0.07 in 2022 and 1.30 ± 0.20 in 2023 using 50 nm diameter AuNPs. Experiments in 2023 with 20 nm diameter AuNPs yielded a comparable SER of 1.38 ± 0.18, indicating no significant size-dependent differences. The radiosensitizing effect exhibited dose-dependent amplification, with higher doses producing greater cell killing. Linear-Quadratic (LQ) model fits showed an increased 𝛼 parameter in the presence of AuNPs, consistent with an increase in non-repairable damage. This trend was further supported by double-strand break assays. Furthermore, oxidative stress assays showed that AuNPs do not increase basal ROS levels, but enhance ROS production under oxidative stress conditions., [Conclusion] The radiobiology experiments presented quantitatively confirm that both 20 and 50 nm diameter AuNPs enhance the radiosensitivity of HeLa cells under proton irradiation. The radiosensitizing effect increases with dose, indicating a dose-dependent response, while no significant differences were observed between nanoparticle sizes. Consistent trends of increased DNA double-strand breaks further support the observed radiosensitization. Evidence from oxidative stress assays suggests that AuNPs may enhance ROS production under oxidative conditions, potentially contributing to the observed radiosensitization and DNA damage., This work was supported by the Generalitat Valenciana through the grant CDEIGENT2021/012 and CIPROM/2022/062. Also by the Spanish Ministry of Science and Innovation (MCIN/AEI/FEDER/UE) through grants PID2021-123879OB-C21, PID2022-140603NB-100 and PID2023-152568NB-100, funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe” as well as by the Ideas Semilla Project IDEAS222767JIME from the Spanish Association Against Cancer (AECC). Furthermore, financial support was provided by the European Union–NextGenerationEU and the Regional Ministry of University, Research and Innovation of the Junta de Andalucía through the Recovery, Transformation and Resilience Plan (PRTR) and the Complementary Plan in Astrophysics (subproject C17.I01.P01.S17, public grant ASTRO21/1.4/4)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Neutron activation as benchmark for cross section evaluations: demonstration through the MACS of 50Cr for nuclear technology applications

  • Pérez Maroto, Pablo
  • Guerrero, Carlos
  • Fernández, B.
  • Casanovas Hoste, Adrià|||0000-0002-7138-0894
  • Stamati, Maria Elisso
Neutron cross section libraries often differ with each other due to the limited availability of differential cross section data from time-of-flight experiments. These are indeed challenging, requiring state-of-the-art facilities and detectors, as well as an involved data analysis. However, in some cases, an easier alternative can be found in simpler integral experiments, as it is demonstrated herein. The capture cross section of 50Cr plays an important role in nuclear reactors and recent criticality safety benchmarks pointed to an increase of 20%, which has been incorporated in the recent INDEN (2023) evaluated library. In this work we have carried out an epithermal neutron activation measurement on 50Cr at the CNA HiSPANoS facility. The resulting Maxwellian Average Cross Section (MACS) at 30 keV, 37.1(20) mb, provides enough evidence to discard the proposed increase in the cross section. Furthermore, it illustrates the suitability of the activation technique to benchmark cross section evaluations in the epithermal energy region. This can in principle be extended to other reactions (as far as they result in radioactive nuclei) and to the fast neutron range by employing mono-energetic beams from D-D and D-T reactions in similarly simple experiments., The authors gratefully acknowledge the contribution of Dr. Emilio Mendoza (CIEMAT), who created on demand the GEANT4 nuclear data files corresponding to the latest INDEN evaluation. We would like to thank also Ángel Romero and David Pascual for operating the accelerator during the experiment. This measurement has received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement No 847594 (ARIEL), and from the Spanish national projects RTI2018-098117-B-C21 and PID2021-123879OB-C21. From the UPC side, we would like to acknowledge also Spanish projects PID2019-104714GB-C21 and PID2022-138297NB-C21. The work presented herein is part of the PhD thesis of P. Pérez-Maroto at Universidad de Sevilla, Spain, funded through the FPI national Grant No PRE2019-089678., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-energy threshold demonstration for dark matter searches in TREX-DM with an 37Ar source produced at CNA HiSPANoS

  • Castel, Juan Francisco
  • Cebrián, Susana
  • Dafni, Theopisti
  • Díez-Ibáñez, David
  • Ezquerro, Álvaro
  • Fernández, Begoña
  • Galán, Javier
  • García, Juan Antonio
  • Guerrero, Carlos
  • García Irastorza, Igor
  • Luzón, Gloria
  • Margalejo, Cristina
  • Mirallas, Héctor
  • Obis, Luis
  • Ortiz de Solórzano, Alfonso
  • Pérez Lázaro, Óscar
  • Porrón, Jorge
  • Jiménez Puyuelo, María
  • Quintana, Ana
We report on the successful implementation of an 37Ar calibration source in the TREX-DM detector, a high-pressure time projection chamber designed for low-mass dark matter searches. The 37Ar source was produced through fast neutron activation of CaO powder at the HiSPANoS facility of Centro Nacional de Aceleradores (CNA) in Spain, yielding O(1) kBq of activity. Using a novel combined GEM-Micromegas readout system, we successfully detected both characteristic emissions from 37Ar decay (2.82 keV and 270 eV) and achieved unprecedented energy threshold performance in TREX-DM, approaching the single-electron ionization energy of argon.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Neutron activation as benchmark for cross section evaluations: demonstration through the MACS of 50Cr for nuclear technology applications

  • Pérez Maroto, Pablo
  • Guerrero, Carlos
  • Fernández, B.
  • Casanovas Hoste, Adrià
  • Stamati, Maria Elisso
Neutron cross section libraries often differ with each other due to the limited availability of differential cross section data from time-of-flight experiments. These are indeed challenging, requiring state-of-the-art facilities and detectors, as well as an involved data analysis. However, in some cases, an easier alternative can be found in simpler integral experiments, as it is demonstrated herein. The capture cross section of 50Cr plays an important role in nuclear reactors and recent criticality safety benchmarks pointed to an increase of 20%, which has been incorporated in the recent INDEN (2023) evaluated library. In this work we have carried out an epithermal neutron activation measurement on 50Cr at the CNA HiSPANoS facility. The resulting Maxwellian Average Cross Section (MACS) at 30 keV, 37.1(20) mb, provides enough evidence to discard the proposed increase in the cross section. Furthermore, it illustrates the suitability of the activation technique to benchmark cross section evaluations in the epithermal energy region. This can in principle be extended to other reactions (as far as they result in radioactive nuclei) and to the fast neutron range by employing mono-energetic beams from D-D and D-T reactions in similarly simple experiments., The authors gratefully acknowledge the contribution of Dr. Emilio Mendoza (CIEMAT), who created on demand the GEANT4 nuclear data files corresponding to the latest INDEN evaluation. We would like to thank also Ángel Romero and David Pascual for operating the accelerator during the experiment. This measurement has received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement No 847594 (ARIEL), and from the Spanish national projects RTI2018-098117-B-C21 and PID2021-123879OB-C21. From the UPC side, we would like to acknowledge also Spanish projects PID2019-104714GB-C21 and PID2022-138297NB-C21. The work presented herein is part of the PhD thesis of P. Pérez-Maroto at Universidad de Sevilla, Spain, funded through the FPI national Grant No PRE2019-089678., Peer Reviewed, Postprint (published version)