DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Gamma- and neutron-based radiography for non-destructive testing of additive-manufactured steel samples
Conventional X-ray radiography is the current standard for industrial non-destructive testing of metallic parts.
However, some limitations arise due to the low penetration depth of X-rays for certain materials or their
thickness. This is the case for metal additive manufacturing, where quality control and internal inspection
are critical in most applications. In this paper we report the use of a
137Cs gamma source (∼180 MBq) and
a
60Co gamma irradiator (∼47 TBq) for gamma radiography and tomography of steel samples from additive
manufacturing. A simple experimental device composed of a scintillating screen and a frame-based camera was
used to digitally capture the sample images. Internal details were observed with a spatial resolution of 1–3 mm.
Similar results were obtained with the same imaging device adapted and utilized for neutron radiography
using thermal neutrons from the CNA HiSPANoS facility, which is based on a compact particle accelerator.
The results presented show that this simple, flexible solution for different source types, could be implemented
through further optimization as a portable and cost-effective system for non-destructive testing. In particular,
these techniques could effectively be established as a promising approach for metal additive-manufactured
parts testing, This work has received funding from the MICIU/AEI under grant PTQ2023-013080; grants RYC2019-028438-I, CEX2023-001318-M, and PID2021-125995NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the Regional Government of Galicia under the program “Proyectos de excelencia” Grant No. ED431F 2022/13. The operation of the HiSPANoS facility is based on support from the Plan Estatal 2021–2023 project PID2021-123879OB-C21. Partial financial support was also received from company Neutron Insights S.L., Peer reviewed
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 PTQ2023-013080
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 RYC2019-028438-I
,
AEI CEX2023-001318-M
,
AEI PID2021-125995NA-I00
,
AEI PID2021-123879OB-C21
DOI: http://hdl.handle.net/10261/433569, https://api.elsevier.com/content/abstract/scopus_id/105032518031
HANDLE: http://hdl.handle.net/10261/433569, https://api.elsevier.com/content/abstract/scopus_id/105032518031