Pasar al contenido principal

RECUBRIMIENTOS INNOVADORES PREPARADOS POR MAGNETRON SPUTTERING PARA ABSORCION SOLAR SELECTIVA

PID2019-104256RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

  • Sanchez-Perez, M.
  • Rojas, T.C.
  • Fernández de los Reyes, Daniel
  • Ferrer, F.J.
  • Farchado, M.
  • Morales, A.
  • Escobar-Galindo, Ramón
  • Sanchez-Lopez, J.C.
The effect of applying a negative bias during deposition of a previously designed multilayer solar selective absorber coating was studied on two types of substrates (316L stainless steel and Inconel 625). The solar selective coating is composed of different chromium aluminum nitride layers deposited using a combination of radiofrequency (RF), direct current (DC), and high-power impulse magnetron sputtering (HiPIMS) technologies. The chemical composition is varied to generate an infrared reflective/absorber layer (with low Al addition and N vacancies) and two CrAlN intermediate layers with medium and high aluminum content (Al/Cr = 0.6 and 1.2). A top aluminum oxide layer (Al2O3) is deposited as an antireflective layer. In this work, a simultaneous DC-pulsed bias (−100 V, 250 kHz) was applied to the substrates in order to increase the film density. The optical performance, thermal stability, and oxidation resistance was evaluated and compared with the performance obtained with similar unbiased coating and a commercial Pyromark paint reference at 600, 700, and 800 °C. The coating remained stable after 200 h of annealing at 600 °C, with solar absorptance (α) values of 93% and 92% for samples deposited on stainless steel and Inconel, respectively, and a thermal emittance ϵ25°C of 18%. The introduction of additional ion bombardment during film growth through bias assistance resulted in increased durability, thermal stability, and working temperature limits compared with unbiased coatings. The solar-to-mechanical energy conversion efficiency at 800 °C was found to be up to 2 times higher than Pyromark at C = 100 and comparable at C = 1000.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-temperature solar-selective coatings based on Cr(Al)N. Part 2: Design, spectral properties and thermal stability of multilayer stacks

  • Rojas, T. Cristina
  • Caro, A.
  • Escobar-Galindo, Ramón
  • Sánchez-López, J.C.
Two multilayer solar selective absorber coatings [Al/CrN0.95/Cr0.96Al0.04N1.08/Cr0.53Al0.47N1.12/Al2O3 (stack #1) and Cr0.96Al0.04N0.89/Cr0.62Al0.38N1.00/Cr0.53Al0.47N1.12/Al2O3 (stack #2)] were deposited on 316L steel by combining direct current (DC) and high power impulse magnetron sputtering (HiPIMS) technologies with the aim of increasing the working limit temperature. The composition and thickness of the constituent layers were optimized using CODE software to achieve a high solar absorptance (α) and low values of thermal emittance (ɛ) in the infrared region. The deposited multilayered stacks were heated during 2 hours in air at 600, 700 and 800 ºC to study their thermal stability and optical performance. Compositional, structural and optical characterization of the stacks (as-prepared and after thermal treatment) was performed. Both stacks presented a good solar selectivity with  > 95% and 25 ºC < 15%, were stable up to 600 ºC and fulfilled the performance criterion PC < 5% after 600 and 700 ºC treatments. Despite the stacks suffered chemical transformations above 600 ºC, partial oxidation (stack #1) and Cr2N formation (stack #1 and #2), the optical properties were optimum up to 700 ºC for stack #1 (α = 94%, ε(25 ºC) =12%) and 600 ºC for stack #2 (α = 93%, ε25 ºC =13%).The solar-to-mechanical energy conversion efficiencies () of the as-deposited and annealed (600 and 700 ºC) samples were up to 20 percentage points higher than the absorber paint commercially used (Pyromark). At 800 ºC, they underwent a further structural transformation, provoked by the oxidation of the inner layers, and they consequently lost their solar selectivity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

  • Sánchez-Pérez, Miriam
  • Rojas, T. Cristina
  • Reyes, Daniel F.
  • Ferrer, F. J.
  • Farchado, Meryem
  • Morales, Ángel
  • Escobar Galindo, R.
  • Sánchez-López, Juan Carlos
The effect of applying a negative bias during deposition of a previously designed multilayer solar selective absorber coating was studied on two types of substrates (316L stainless steel and Inconel 625). The solar selective coating is composed of different chromium aluminum nitride layers deposited using a combination of radiofrequency (RF), direct current (DC), and high-power impulse magnetron sputtering (HiPIMS) technologies. The chemical composition is varied to generate an infrared reflective/absorber layer (with low Al addition and N vacancies) and two CrAlN intermediate layers with medium and high aluminum content (Al/Cr = 0.6 and 1.2). A top aluminum oxide layer (Al2O3) is deposited as an antireflective layer. In this work, a simultaneous DC-pulsed bias (−100 V, 250 kHz) was applied to the substrates in order to increase the film density. The optical performance, thermal stability, and oxidation resistance was evaluated and compared with the performance obtained with similar unbiased coating and a commercial Pyromark paint reference at 600, 700, and 800 °C. The coating remained stable after 200 h of annealing at 600 °C, with solar absorptance (α) values of 93% and 92% for samples deposited on stainless steel and Inconel, respectively, and a thermal emittance ε25°C of 18%. The introduction of additional ion bombardment during film growth through bias assistance resulted in increased durability, thermal stability, and working temperature limits compared with unbiased coatings. The solar-to-mechanical energy conversion efficiency at 800 °C was found to be up to 2 times higher than Pyromark at C = 100 and comparable at C = 1000., The authors acknowledge projects P18-RT-2641 funded by Junta de Andalucía (PAIDI2020) and European Regional Development Funds (EU-FEDER), PID2019-104256RB-I00 and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033, and the University of Seville (VI PPIT-US)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of high-temperature stability of solar absorber coatings on metallic substrates through diffusion barriers

  • Parra-Montero, C. I.
  • Rojas, T. C.
  • Escobar-Galindo, R.
  • Sánchez-López, J.C.
The high-temperature stability of solar absorber paints is critical for the efficiency of concentrating solar power systems, particularly central towers operating at ∼800 °C, where ion interdiffusion at the coating/substrate interface is significant. This work examines the effect of a diffusion barrier (DB) formed by controlled surface oxidation of stainless steel 316L (SS316) and Inconel 625 (INC625) at 800 °C to improve the thermal stability and optical performance. A CrAlSiN/AlSiO solar absorber tandem structure was deposited on oxidized and unoxidized substrates, with their stability compared after annealing at 800 °C for 2 h. The presence of the DB layer resulted in improved thermal stability and optical performance, with post-annealing absorptance values of 0.953 (SS316) and 0.949 (INC625), surpassing those of the reference samples, without the diffusion barrier (0.932 and 0.901, respectively). Microstructural and spectroscopic analyses confirmed the effectiveness of the DB, highlighting its potential for advanced concentrating solar power applications., The authors acknowledge the financial support of projects PID2019-104256RB-I00 and PID2023-147102NB-I00, funded by MCIN/AEI/10.13039/501100011033. The material analysis services (SEM, TEM, UV–vis and XRD) provided by the Instituto de Ciencia de Materiales de Sevilla are also gratefully acknowledged. Lorena González and Daniel F. Reyes from University of Cádiz are specially acknowledged for their TEM contribution in the lamella preparation and BF-STEM image of Fig. 8, respectively. C. Parra-Montero acknowledges Junta de Andalucía for supporting her Ph.D. fellowship (PREDOC_00926)., Peer reviewed