Pasar al contenido principal

DISPOSITIVOS FOTONICOS Y OPTOELECTRONICOS DE ALTA ESTABILIDAD BASADOS EN PEROVSKITAS DE HALURO MEDIANTE TECNOLOGIAS DE VACIO Y PLASMA

PID2022-143120OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Essential Oil Extraction from Lavandin Grosso Flowers via Plasma Treatment

  • Molina Mansilla, Ricardo
  • López-Santos, Carmen
  • Balestrasse, Karina
  • Gómez-Ramírez, Ana
  • Sauló, Jordi
This study explores the impact of plasma treatment on Lavandin Grosso flowers and its influence on the extraction of essential oils (EOs) via hydrodistillation. Short plasma treatment times enhance the yield of EO extraction from 3.19% in untreated samples to 3.44%, corresponding to 1 min of plasma treatment, while longer treatment times (10 min) show diminishing returns to 3.07% of yield extraction. Chemical characterization (GC/MS and ATR-FTIR) indicates that plasma treatments do not significantly alter the chemical composition of the extracted EOs, preserving their aromatic qualities. Investigations into plasma–surface interactions reveal changes at the nanometer level, with XPS confirming alterations in the surface chemistry of Lavandin Grosso flowers by reducing surface carbon and increasing oxygen content, ultimately resulting in an increased presence of hydrophilic groups. The presence of hydrophilic groups enhances the interaction between the surface membrane of the glandular trichomes on Lavandin Grosso flowers and water vapor, consequently increasing the extraction of EOs. Furthermore, microscopic SEM examinations demonstrate that plasma treatments do not affect the morphology of glandular trichomes, emphasizing that surface modifications primarily occur at the nanoscale. This study underscores the potential of plasma technology as a tool to enhance EO yields from botanical sources while maintaining their chemical integrity., The authors thank TED2021-130916B-I00 and PID2022-143120OB-I00 projects funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, by the “European Union”. C.L.-S. thanks the support of the Ramon y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lasting low fluorinated stainless steel hierarchical surfaces for omniphobic, anti-fouling and anti-icing applications

  • Montes, Laura
  • Rico, Víctor J.
  • Núñez-Gálvez, Fernando
  • Arenas, M. A.
  • Conde del Campo, Ana
  • López-Flores, Víctor
  • Espinós, J.P.
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • López-Santos, Carmen
Stainless steel (SS) alloys are prevalent in many industries, household appliances or other commodities, where a strict control of surface properties is required to tailor their interaction with the environment. In this work we report a new procedure of stainless steel surface processing that provides a multifunctional response including superhydrophobicity, omniphobicity, self-cleaning, anti-fouling and effective anti-icing capacity, while still preserving a corrosion resistance similar to that of this material in compact form. The method consists of a first nanostructuration step followed by a low fluorination. The nanostructured surfaces presented a dual scale roughness of hierarchical character. The liquid free approach developed in this work to get this singular surface nanostructuration entails a first laser treatment of stainless steel flat substrates, followed by the deposition of a nanostructured thin layer of this material by electron beam evaporation in an oblique angle configuration. The resulting hierarchical surfaces were subjected to fluorination by: (i) the plasma-assisted deposition of a thin Teflon-like coating or (ii) the grafting of fluorinated molecules. The self-cleanable, anti-adherent and ice repellent character of the resulting low fluorinated surfaces outperformed the behaviour of classical slippery surfaces obtained by the infusion of high amounts of fluorinated liquids. These hierarchical SS surfaces withstood mild abrasion tests and the effect of water jets. Moreover, the corrosion behaviour of the fluorinated surfaces determined through their potentiodynamic analysis revealed a similar corrosion resistance than the flat SS substrates. Outstandingly, after these corrosion tests, the fluorinated samples obtained by grafting preserved their surface functionalities without significant degradation. The high mechanical and chemical stability of these low fluorinated samples support their usage for a large variety of applications., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 ( FETOPEN-01-2018-2019-2020 – SOUNDofICE ). The authors thank projects TED2021-130916B-I00 , and PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, by the “European Union". FNG and CLS thanks to the “ VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. CLS thanks the support of the Ramon y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033 . We thank particularly Juan Carlos Sanchez for the Confocal microscopy support at Institute of Materials Science of Seville (Spain), and Elmar Bonaccurso for the rain erosions test in Airbus Central R&T Materials laboratory- Munich (Germany)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal TiO2 Aerogel-Like Films by Plasma Deposition: fromOmniphobic Antireflective Coatings to Perovskite Solar CellPhotoelectrodes

  • Obrero-Pérez, José M.
  • Contreras-Bernal, Lidia
  • Aparicio, Francisco J.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Orozco, Noe
  • Saghi, Zineb
  • Czermak, Triana
  • Pedrosa, José M.
  • López-Santos, Carmen
  • Ostrikov, Kostya Ken
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
he ability to control the porosity of thin oxide films is akey factor determining their properties. Despite the abundance of dryprocesses for synthesizing oxide porous layers, a high porosity range istypically achieved by spin-coating-based wet chemical methods. Besides,special techniques such as supercritical drying are required to replace thepore liquid with air while maintaining the porous network. In this study,we propose a new method for the fabrication of ultraporous titaniumdioxide thin films at room or mild temperatures (T ≤ 120 °C) by asequential process involving plasma deposition and etching. These filmsare conformal to the substrate topography even for high-aspect-ratiosubstrates and show percolated porosity values above 85% that arecomparable to those of advanced aerogels. The films deposited at roomtemperature are amorphous. However, they become partly crystalline atslightly higher temperatures, presenting a distribution of anatase clusters embedded in the sponge-like open porous structure.Surprisingly, the porous structure remains after annealing the films at 450 °C in air, which increases the fraction of embeddedanatase nanocrystals. The films are antireflective, omniphobic, and photoactive, becoming superhydrophilic when subjected toultraviolet light irradiation. The supported, percolated, and nanoporous structure can be used as an electron-conducting electrode inperovskite solar cells. The properties of the cells depend on the aerogel-like film thickness, which reaches efficiencies close to thoseof commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and applicable to ultrahigh porousconformal oxides of different compositions, with potential applications in photonics, optoelectronics, energy storage, and controlledwetting, We thank the projects PID2022-143120OB-I00, PID2019-110430GB-C21, PID2019-110430GB-C22, and TED2021-130916B-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, and the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480 and US-1381057). FJA thanks the EMERGIA Junta de Andalucia program. FJF thanks the University of Seville (VI PPIT-US). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Stable Photoluminescence in Vacuum-Processed Halide Perovskite Core–Shell 1D Nanostructures

  • Castillo-Seoane, Javier
  • Contreras-Bernal, Lidia
  • Rojas, T. Cristina
  • Espinós, J.P.
  • Castro-Méndez, Andrés Felipe
  • Correa-Baena, Juan Pablo.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
Hybrid organometal halide perovskites (HP) present exceptional optoelectronic properties, but their poor long-term stability is a major bottleneck for their commercialization. Herein, a solvent-free approach to growing single-crystal organic nanowires (ONW) is presented, along with nanoporous metal oxide scaffolds and HP, to form a core@multishell architecture. The synthesis is carried out under mild vacuum conditions employing thermal evaporation for the metal-free phthalocyanine (H2Pc) nanowires, which are the core, plasma-enhanced chemical vapor deposition (PECVD) for the TiO2 shell, and co-evaporation of lead iodide (PbI2) and methylammonium iodide (CH3NH3I/MAI) for the CH3NH3PbI3 (MAPbI3/MAPI) perovskite shell. A detailed characterization of the nanostructures by electron microscopy, (S)-TEM, and X-ray diffraction, XRD, is presented, revealing a different crystallization of the HP depending on the template: while the growth on H2Pc nanowires induces the typical MAPI tetragonal structure, a low-dimensional phase (LDP) is observed on the 1D-TiO2 nanotubes. Such a combination yields an unprecedentedly stable photoluminescence emission over 20 h and over 300 h after encapsulation in polymethyl methacrylate (PMMA) under different atmospheres including N2, air, and high moisture levels. Moreover, the unique 1D morphology of the system, together with the high refractive index, allows for a strong waveguiding effect along the HP nanowire length., The authors thank the projects PID2022-143120OB-I00, PID2019-109603RA-I00, TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos Nextgeneration EU and Plan de Recuperación, Transformación y Resiliencia”. The authors also want to thank CSIC for its financial support through the Intramural Project PIE 202260I156 and Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). The authors also thank the group of Prof. Heben at the University of Toledo (US) for their assistance in understanding the crystalline low-dimensional phase., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current Trends on Advancement in Smart Textile Device Engineering

  • Behera, Swayam Aryam
  • Panda, Swati
  • Hajra, Sugato
  • Kaja, Kushal Ruthvik
  • Pandey, Adarsh Kumar
  • Barranco, Ángel
  • Jeong, Soon Moon
  • Vivekananthan, Venkateswaran
  • Kim, Hoe Joon
  • Achary, P. Ganga Raju
Smart textiles represent a revolutionary approach to wearable technology with applications ranging from healthcare to energy harvesting. This review paper explores the importance of textile technologies and highlights their potential to revolutionize consumer electronics. Conventional technologies are sometimes heavy, and lack comfort and flexibility, but smart textiles seamlessly integrate into everyday clothing, improving wearability and user experience. The article emphasizes the need for sustainable sourcing and environmentally friendly production methods, as well as responsible manufacturing and disposal practices. Manufacturing techniques such as wet spinning, melt spinning, electrostatic spinning, weaving, knitting, and printing are detailed and shed light on their role in incorporating electronics into textiles. Several applications of textile-based devices are being explored, including biochemical sensing, temperature monitoring, energy harvesting, energy storage, and smart displays. Each application demonstrates the versatility and potential of smart textiles in different areas. Despite optimistic progress, challenges remain, from improving energy efficiency to protecting user privacy and data security. The review analyzes these problems and suggests future improvements, including interdisciplinary collaboration to find new solutions. Finally, an overview of the current state of smart textiles provides the future of this technology. It serves as an in-depth reference for academics and readers interested in understanding recent advances and discoveries in textile technologies, highlighting the importance of this rapidly growing industry., S.A.B., S.P., and S.H. contributed equally to this work. This work was supported by the National Research Foundation of Korea (RS-2024-00346135 and NRF-2023R1A2C1003824). V.V. thanks Department of Science and Technology, India for the financial support through PURSE program (SR/PURSE/2023/196). A.B. thanks the support of PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and EU-ERDF (“A way of making Europe”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multidimensional nanoarchitectures for improved indoor light harvesting in dye-sensitized solar cells

  • Castillo-Seoane, Javier
  • Contreras-Bernal, Lidia
  • Riquelme, Antonio J.
  • Fauvel, Samuel
  • Kervella, Yann
  • Gil-Rostra, Jorge
  • Lozano, Gabriel
  • Barranco, Ángel
  • Demadrille, Renaud
  • Sánchez-Valencia, Juan R.
  • Borrás, Ana
Dye Sensitized Solar Cells (DSSCs) have recently gained renewed interest for their potential in indoor light harvesting and powering wireless devices. However, to fully exploit their potential, crucial aspects require further attention, in particular, the improvement of spectral compatibility and low-light harvesting mechanisms, as well as the development of efficient photoanodes through high-yield scalable methods. In this article, we propose the use of nanocomposite photoanodes integrating mesoporous TiO2 nanoparticles, ITO nanotubes (NT), and anatase TiO2 shells (ITO@TiO2 NT) prepared by step-by-step method relying on mild temperature conditions and avoiding toxic precursors. These photoanodes outperform previous attempts to implement low-dimensional ITO and ITO@TiO2 nanowires and nanotubes for outdoor light conversion, demonstrating a power conversion efficiency under low artificial light intensity of 24 % for at 0.014 mW cm−2, a 166 % increase compared to the conventional architectures. Advanced microstructural, optical, and electrochemical characterizations have revealed that the strong scattering effect of the light in the visible range coupled with enhanced charge collection at low-intensity illumination are the essential mechanisms responsible for such enhanced energy conversion. Remarkably, our devices retain up to 90 % of the normal incidence efficiency even under glancing illumination, while conventional reference devices retain only 30 %., We thank the projects PID2019-109603RA-I00, TED2021-130916B-I00, PID2019-110430 GB-C21, and PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. LCB acknowledges the French embassy in Spain for the grant “123892U” within framework of the proposal scientific call 2022 “Becas doctorales y postdoctorales”. Thanks to C.M.D Felipe II, particularly María Inmaculada Carmona Rivera, for providing some tools for preparing counter-electrodes. The authors also thank CSIC for its financial support through the Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). R.D. acknowledges the European Research Council (ERC) for funding. This work was funded under the European Union's Horizon 2020 research and innovation programme (grant agreement number 832606; project PISCO). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triboelectric pixels as building blocks for microscale and large-area integration of drop energy harvesters

  • Ghaffarinejad, Ali
  • García-Casas, Xabier
  • Núñez-Gálvez, Fernando
  • Budagosky, Jorge
  • Godinho, Vanda
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Barranco, Ángel
  • Borrás, Ana
The dataset of this article has been deposited at digital.csic under the DOI https://doi.org/10.20350/digitalCSIC/16536 and is publicly available as of the publication date. All original code for the NanoDataLyzer has been deposited at Zenodo under the DOI https://doi.org/10.5281/ZENODO.13225385. Any additional information required to reanalyze the data reported in this paper is available from the lead contact upon request, Triboelectric nanogenerators (TENGs) are the most promising technology for harvesting energy from low-frequency liquid flows and impacts such as rain droplets. However, current drop energy harvester technologies suffer from low output power due to limitations in triboelectric materials, suboptimal device designs, and the inability to fully capture the kinetic energy of falling drops. This article introduces a microscale TENG capable of efficiently converting drop impact energy into electrical power in a single, rapid step. The device features a capacitive structure that enhances energy conversion through instantaneous capacitance changes when the drops contact the submillimetric top electrodes. This compact design establishes a path toward the development of dense arrays and rain panels and is adaptable to various liquids, scales, triboelectric surfaces, and thin-film configurations, including flexible and transparent materials., The authors thank the projects PID2022-143120OB-I00, PCI2024-153451, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia.” C.L.-S. thanks the University of Seville through the VI PPIT-US and “Ramón y Cajal” program funded by MCIN/AEI/10.13039/501100011033. J.R.S.-V. acknowledges project ANGSTROM selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement no. 958174). X.G.-C. acknowledges the FPU program under grant number FPU19/01864. FNG acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in Hybrid Icing and Frosting Protection Strategies for Optics, Lens, and Photonics in Cold Environments Using Thin-Film Acoustic Waves

  • Ong, Hui Ling
  • Ji, Zhangbin
  • Haworth, Luke
  • Guo, Yihao
  • del Moral, Jaime
  • Jacob, Stefan
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Zhang, Jikai
  • Zhou, Jian
  • McHale, Glen
  • Fu, Yong Qing
Fogging, icing, or frosting on optical lenses, optics/photonics, windshields, vehicle/airplane windows, and solar panel surfaces have often shown serious safety concerns with hazardous conditions and impaired sight. Various active techniques, such as resistive heating, and passive techniques, such as icephobic treatments, are widely employed for their prevention and elimination. However, these methods are not always suitable, effective, or efficient. This review provides a comprehensive overview of the fundamentals and recent advances of transparent thin-film surface acoustic wave (SAW) technologies on glass substrates for monitoring and prevention/elimination of fogging, frosting, and icing. Key challenges related to fogging and icing on glass substrates are discussed, along with fundamental mechanisms that establish thin-film SAWs as optimal solution for these issues. Various types of thin-film acoustic wave technologies are discussed, including recent wearable and flexible SAW devices integrated onto glass substrates for expanding future applications. The focus of this review is on the principles and strategies for hybrid or integrated de-fogging/de-icing and sensing/monitoring functions. Finally, critical issues and future outlooks for thin-film-based SAW technology on glass substrates in industry applications are presented., This work was supported by the UK Fluids Network Special Interest Group of Acoustofluidics (EP/N032861/1), EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) for funding through grant EP/S023836/1, International Exchange Grant (IEC/NSFC/201078) through Royal Society and the Natural Science Foundation of China (NSFC), the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE), PID2022-143120OB-I00, PCI2024-153451 (m-era.net 3, GA 958174), and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER),” A way of making Europe, Fondos NextgenerationEU, and Plan de Recuperación, Transformación y Resiliencia.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile integration of single-crystalline phthalocyanine nanowires and nanotrees as photo-enhanced conductometric sensors

  • Filippin, A Nicolás
  • Campos-Lendinez, Ángel
  • Delgado-Alvarez, Juan
  • Moreno-Martinez, Gloria
  • Castillo-Seoane, Javier
  • Rico, Víctor J.
  • Godinho, Vanda
  • Barranco, Ángel
  • Sanchez-Valencia, Juan R
  • Borrás, Ana
Chemicals and CAS Registry Numbers oxygen 7782-44-7 phthalocyanine 574-93-6, This article is part of the themed collection: Synthesis, physical properties and applications of advanced nanocrystalline materials, This article presents a reproducible and affordable methodology for fabricating organic nanowires (ONWs) and nanotrees (ONTs) as light-enhanced conductometric O2 sensors. This protocol is based on a solventless procedure for the formation of high-density arrays of nanowires and nanotrees on interdigitated electrodes. The synthesis combines physical vapour deposition for the self-assembled growth of free-phthalocyanine nanowires and soft plasma etching to prompt the nucleation sites on the as-grown ONWs to allow for the formation of nanotrees. Electrical conductivity in such low-dimensional electrodes was analysed in the context of density, length, and interconnection between nanowires and nanotrees. Furthermore, the electrodes were immersed in water to improve the nanowires' connectivity. The response of the nanotrees as conductometric O2 sensors was tested at different temperatures (from room temperature to 100 °C), demonstrating that the higher surface area exposed by the nanotrees, in comparison with that of their polycrystalline thin film counterparts, effectively enhances the doping effect of oxygen and increases the response of the ONT-based sensor. Both organic nanowires and nanotrees were used as model systems to study the augmented response of the sensors provided by illumination with white or monochromatic light to organic semiconducting systems. Interestingly, the otherwise negligible sensor response at room temperature can be activated (On/Off) under LED illumination, and no dependency on the illumination wavelength in the visible range was observed. Thus, under low-power LED illumination with white light, we show a response to O2 of 16% and 37% in resistivity for organic nanotrees at room temperature and 100 °C, respectively. These results open the path to developing room temperature long-lasting gas sensors based on one- and three-dimensional single-crystalline small-molecule nanowires., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ion Mobility and Segregation in Seed Surfaces Subjected to Cold Plasma Treatments

  • Perea-Brenes, Álvaro
  • Ruiz-Pino, Natalia
  • Yubero, Francisco
  • García, José Luis
  • González-Elipe, Agustín R.
  • Gómez-Ramírez, Ana
  • Prados, Antonio
  • López-Santos, Carmen
60 pages, 15 figures, submitted to Journal of Agricultural and Food Chemistry doi: 10.1021/acs.jafc.4c09650, Chemicals and CAS Registry Numbers calcium 7440-70-2, 14092-94-5 Calcium Ions Plasma Gases, Plasma treatment of seeds is an efficient procedure to accelerate germination, to improve initial stages of plant growth, and for protection against pathogen infection. Most studies relate these beneficial effects with biochemical modifications affecting the metabolism and genetic growth factors of seeds and young plants. Using barley seeds, in this work, we investigate the redistribution of ions in the seed surface upon their treatment with cold air plasmas. In addition, we investigate the effect of plasma in the lixiviation of ions through the seeds' hull when they are immersed in water. Ion redistribution in the outer layers of air plasma-treated seeds has been experimentally determined through X-ray photoelectron spectroscopy analysis in combination with in-depth chemical profiling with gas cluster ion beams. The results show that in the shallowest layers of the seed hull (at least up to a depth of ∼100 nm) there is an enrichment of K+ and Ca2+ ions, in addition to changes in the O/C and N/C atomic ratios. These data have been confirmed by the electron microscopy/fluorescence analysis of seed cuts. Observations have been accounted for by a Monte Carlo model, simulating the electrostatic interactions that develop between the negative charge accumulated at the seed surface due to the interaction with the plasma sheath and the positive ions existing in the interior. Furthermore, it is shown that upon water immersion of plasma-treated seeds mobilized ions tend to lixiviate more efficiently than in pristine seeds. The detection of a significant concentration of NO3- anions in the water has been attributed to a secondary reaction of nitrogen species incorporated into the seeds during plasma exposure with reactive oxygen species formed on their surface during this treatment. The implications of these findings for the improvement of the germination capacity of seeds are discussed., The authors thank the projects PID2022-143120OB-I00, PID2020-114270RA-I00, PID2020-112620GB-I00, and PID2023-147916NA-I00, TED2021-130124A-I00, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. CLS thanks the University of Seville through the VI PPIT-US and “Ramon y Cajal” program funded by MCIN/AEI/10.13039/501100011033. The project leading to this article has received funding from the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía through the project US-1381045 as well as the EU through cohesion fund and FEDER 2014–2020 programs for financial support. Natalia Ruiz Pino acknowledges support from the FPU programme through Grant FPU2021/01764., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms of de-icing by surface rayleigh and plate lamb acoustic waves

  • Pandey, Shilpi
  • Moral, Jaime del
  • Montes, Laura
  • Gil-Rostra, Jorge
  • Frechilla, Alejandro
  • Rico, Víctor J.
  • López-Santos, Carmen
  • Koivuluoto, Heli
  • Angurel, Luis A.
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
Special Section: Materials Technologies for Controlling Liquid Surface Interactions from Wetting to Icing.-- et al., Acoustic waves (AW) have recently emerged as an energy-efficient ice-removal procedure compatible with functional and industrial-relevant substrates. However, critical aspects at fundamental and experimental levels have yet to be disclosed to optimize their operational conditions. Identifying the processes and mechanisms by which different types of AWs induce de-icing are some of these issues. Herein, using model LiNbO<inf>3</inf> systems and two types of interdigitated transducers, the e-icing and anti-icing efficiencies and mechanisms driven by Rayleigh surface acoustic waves (R-SAW) and Lamb waves with 120 and 510 μm wavelengths, respectively, are analyzed. Through the experimental analysis of de-icing and active anti-icing processes and the finite element simulation of the AW generation, propagation, and interaction with small ice aggregates, it is disclosed that Lamb waves are more favorable than R-SAWs to induce de-icing and/or prevent the freezing of small ice droplets. Prospects for applications of this study are supported by proof of concept experiments, including de-icing in an icing wind tunnel, demonstrating that Lamb waves can efficiently remove ice layers covering large LN substrates. Results indicate that the de-icing mechanism may differ for Lamb waves or R-SAWs and that the wavelength must be considered as an important parameter for controlling the efficiency., The authors thank the projects PID2022-143120OB-I00 and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. CLS thanks the University of Seville through the VI PPIT-US and “Ramon y Cajal” program funded by MCIN/AEI/10.13039/501100011033. This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

  • Delgado-Álvarez, Juan
  • Krishna- Mishra, Hari
  • Aparicio, Francisco J.
  • García-Casas, Xabier
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
  • López-Flores, Víctor
  • Borrás, Ana
We report on the development of a novel flexible piezo/pyro-electric nanogenerator (PPNG) that combines a uniform film of poly(vinylidene fluoride) (PVDF) infiltrated into vertically supported SiO2 nanowires (NWs) to enhance both piezoelectric and pyroelectric energy harvesting capabilities. The synthetic procedure involves a low-temperature, multi-step approach, including the soft-template formation of SiO2 NWs on a flexible substrate, followed by the infiltration of a PVDF thin film (TF). The plasma-enabled fabrication of SiO2 NWs facilitated vertical alignment and precise control over the surface microstructure, density, and thickness of the confined nanostructures. These strategic structural systems promote the development of the most favorable electroactive β- and γ-phases in the PVDF matrix. Notably, electrical poling plays a major role in aligning the random dipoles of the PVDF macromolecular chain in a more ordered fashion to nucleate the amplified electroactive phases. The electrostatic interaction between PVDF and SiO2 NWs, which helps to facilitate the electroactive phase, is confirmed by the surface potential distribution. As a proof-of-concept, the fabricated PPNG exhibited a significant improvement in the instantaneous piezoelectric output power density (P), with a ∼9-fold amplification relative to its bare PVDF TF counterpart. In addition, PPNG has demonstrated excellent stability and durability. Analogously, the pyroelectric coefficient (p) demonstrated a 4-fold superior performance compared to the reference PVDF TF-based PPNG. Thus, the engineered system of SiO2 NWs@PVDF comprising PPNG offers a promising pathway toward multisource energy harvesting capabilities through efficient energy transduction at mechanical excitation frequencies of 10–12 Hz and across a temperature difference of 9–22 K., The authors thank Project Nos. PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” Fondos NextGenerationEU and “Plan de Recuperación, Transformación y Resiliencia.” Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 Grant Agreement No. 958174). The project leading to this article has received funding from the EU H2020 program under Grant Agreement No. 851929 (ERC Starting Grant 3DScavengers). V.L.F. acknowledges the support of the VI Plan Propio de Investigación y Transferencia (VI PPIT) of the University of Seville., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-like Films via Remote Plasma Deposition

  • Obrero-Pérez, José M.
  • Moreno, Gloria P.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Moscoso, Francisco G.
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Núñez-Gálvez, Fernando
  • Aparicio, Francisco J.
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Material suplementario en disponible en: https://doi.org/10.1021/acsami.5c07264, Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 °C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. Additional reference compact films VO2 films are obtained by a direct RPAVD process using the same precursor and oxygen plasmas in combination with thermal annealing. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings., We thank the projects PID2022-143120OB-I00, TED2021-130916B–I00, PCI2024-153451, and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos Nextgeneration EU, and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). We also thank the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480) and CSIC (ref 202360086). The project leading to this article has also received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Temperature Remote Plasma Synthesis of Highly Porous TiO2 as Electron Transport Layers in Perovskite Solar Cells

  • Obrero-Pérez, José M.
  • Núñez-Gálvez, Fernando
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Moreno, Gloria P.
  • Czermak, Triana
  • Aparicio, Francisco J.
  • Rojas, T. Cristina
  • Ferrer, F. J.
  • Borrás, Ana
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
Halide perovskite solar cells (PSCs) offer high efficiency at low production costs, making them a promising solution for future photovoltaic technologies. Optimizing charge transport layers is crucial, with porous TiO2 widely used as electron transport layers (ETLs) due to their suitable energy band alignment, transparency, and abundance. However, their performance depends strongly on crystallinity, requiring high-temperature processing (>450 °C), which increases costs and limits their applicability on flexible substrates. Low-temperature wet-chemical methods face scalability issues due to material waste and hazardous solvents. Therefore, plasma-based technologies provide a scalable, eco-friendly alternative for fabricating oxide-based ETLs. This study presents a plasma-based synthesis of TiO2 layers using remote plasma-assisted vacuum deposition (RPAVD) and soft plasma etching (SPE) at temperatures below 200 °C, enabling precise control over microstructure and porosity. The resulting nanocolumnar and aerogel-like TiO2 films are antireflective and enhance optical and electronic properties, leading to improved PSC efficiency (champion PCE = 14.6%) comparable to high-temperature processed devices. The devices are based on a 3D organometal perovskite with mixed cations (MA, FA, Cs, Rb) and halides (I, Br), with a nominal composition of (Rb0.03Cs0.03FA0.69MA0.25)(PbI3)0.83(PbBr3)0.17. Our results highlight the potential of RPAVD+SPE for producing low-temperature ETLs, offering a feasible, industrially scalable solution for flexible, high-performance photovoltaics., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos Nextgeneration EU and “Plan de Recuperación, Transformación y Resiliencia”. The authors also want to thank CSIC for its financial support through the Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of 49 funding organizations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting perovskite solar cell stability: Dual protection with ultrathin plasma polymer passivation layers

  • Nabil, Mahmoud
  • Contreras-Bernal, Lidia
  • Moreno-Martinez, Gloria
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Anta, Juan A.
  • Oskam, Gerko
  • Pistor, Paul
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Metal halide perovskite solar cells (MHPSCs) hold great promise due to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains the main challenge. However, their long-term operational stability under environmental stress remains a critical limitation for commercialization. In this work, we explore a dual passivation strategy using ultrathin adamantane-based plasma polymer (ADA) films, deposited via remote plasma-assisted vacuum deposition (RPAVD), to enhance the environmental stability of MHPSCs. The ADA layers are introduced simultaneously at both the electron transport layer (ETL)/perovskite and perovskite/hole transport layer (HTL) interfaces, offering a conformal, transparent, and thermally stable coating compatible with delicate perovskite films. This approach enables interfacial defect passivation and acts as a protective barrier against moisture and UV-induced degradation. Devices incorporating ADA layers exhibit significantly improved stability under harsh conditions, retaining 80 % of their initial efficiency after 4000 min over extended exposure to humidity and continuous illumination. These results demonstrate the potential of multifunctional plasma-polymer coatings for the scalable and robust fabrication of perovskite solar cells with enhanced durability., We thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of ERA.NET" title="http://M-ERA.NET>M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). M.N, G. O and J.A.A. acknowledge the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI), EU (FEDER) under grants PID2022-140061OB-I00 (DEEPMATSOLAR) and CNS2022-135694 (IMPRESOL) and partial funding through the European Union's Horizon Europe research innovation program under the Platform-Zero project (grant agreement number: 101058459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of Amorphous Porous VOx at Low Temperatures for the Formation of Thermochromic VO2 Films

  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Rojas, Teresa Cristina
  • Álvarez, Rafael
  • Martin, Nicolas
  • González-Elipe, Agustín R.
  • Palmero, Alberto
This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures., Thermochromic VO2 crystalline domains have been formed in amorphous nanocolumnar VOx films by means of a low-temperature oxidation process. The oxidation of an amorphous film with [O]/[V] below 1.9 favors the formation of VO2, V3O7, and V2O5 crystalline domains in the material for temperatures as low as 260 °C, while values above 1.9 lead to the sole formation of the V2O5 phase. It is found that the absorption of oxygen also causes a relevant film volume expansion that makes pores shrink. Under some specific conditions, low-temperature oxidation causes the near disappearance of the amorphous regions, clearly improving the overall transparency and optimizing the optical and electrical modulation capabilities associated with the presence of crystalline VO2 domains. The best thermochromic performance was found when the original stoichiometry was [O]/[V] = 1.5 and the oxidation temperature was 280 °C. These conditions yield a relatively transparent coating in the visible range that presents an optical modulation in the near-infrared range of nearly 50% and a drop of electrical resistivity of more than two orders of magnitude, with a transition temperature of 50.3 °C. A tentative model based on the volume expansion experienced by the film upon oxidation is proposed, which links the structural/chemical features of the material and the formation of the crystalline domains at such relatively low temperatures., We, the authors, thank the projects PID2020-112620GB-I00, PID2021-123879OB-C21, PID2022-143120OB-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos NextGeneration EU, and “Plan de Recuperación, Transformación y Resiliencia”, as well as the intramural project 202560E034, funded by the Spanish National Council of Research. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020–SOUNDofICE). The project leading to this article received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems combining perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) provide continuous power under various weather conditions. However, halide perovskites' vulnerability to moisture hampers widespread use. We present plasma-deposited fluorinated polymers (CFX) as multifunctional encapsulation layers offering water resistance, triboelectric functionality, and > 90 % optical transparency. These conformal, room-temperature, solvent-free coatings protect PSCs without reducing performance; encapsulated cells maintained a PCE of 17.9 %, and devices kept over 50 % of initial PCE after 10 days in high humidity and temperature. CFx layers also enabled compatibility with UV-curable resins, creating a hybrid PSC/D-TENG capable of harvesting solar and rain energy. This device retained 80 % of its performance after 300 hours of humid operation and stayed stable under continuous dripping and illumination for over 5 hours. Optimizing CFx's chemical composition improved triboelectric performance. Using the same CFx layer for encapsulation and triboelectric function, the device achieved 11.6 mA/cm2 short-circuit current under 0.5 sun and 12 V peak voltage per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a boost converter, demonstrating practical multisource energy harvesting., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester [Dataset]

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems that combine perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) offer a compelling solution for continuous power generation under diverse weather conditions. Yet, the inherent vulnerability of halide perovskites to moisture and environmental stressors remains a critical barrier to their widespread deployment. To overcome this bottleneck, we introduce plasma-deposited fluorinated polymers (CFₓ) films as multifunctional encapsulation layers that simultaneously provide water resistance, triboelectric functionality, and optical transparency (>90 %). Plasma deposition enables conformal, room temperature, and solvent-free coating of complex surfaces, ensuring uniform protection without compromising photovoltaic performance. After encapsulation of PSCs with CFx films, power conversion efficiency remained virtually unchanged, and champion cells preserved a PCE of 17.9 %. More importantly, the devices exhibited high environmental stability, retaining over 50 % of their initial PCE for 10 days under high humidity and temperature. Furthermore, CFx layers enabled Spiro-OMeTAD compatibility with commercial UV-curable resins, leading to a thin-film hybrid PSC/D-TENG device capable of simultaneous solar and rain energy harvesting. This device maintained 80 % of its initial performance after 300 h of continuous illumination under humid conditions and demonstrated stability under continuous dripping and illumination for more than 5 h. We demonstrated that optimizing the chemical composition of CFx layers significantly enhances their triboelectric performance. In standalone operation, the optimized CFₓ-based D-TENG, enriched with 36.4 % of (CF2 + CF3) functional species, delivered open-circuit voltage peaks up to 110 V and a maximum power density of ∼4 mW/cm2 under rainwater droplets, while retaining over 85 % of its initial output after more than 17,000 droplet impacts. As a proof of concept, using the same CFx layer for both encapsulation and triboelectric functionality, the hybrid PSC/D-TENG device achieved short-circuit current densities of 11.6 mA/cm2 under 0.5 sun illumination and peak voltages of 12 V per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a custom boost converter, demonstrating practical multisource energy harvesting for low-power electronics., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Fig 1a; Fig 1b; Fig 1e; Fig 2b; Fig 2c; Fig 2d; Fig 2e; Fig 3a; Fig 3b; Fig 3c; Fig 3d; Fig 3f; Fig 4a; Fig 4b; Fig 4c Fig 5a; Fig 5b; Fig 5c; Fig 5d; Fig 5e; Fig 5f; Fig 5g; Fig 5h; Fig 6e; Fig 7a; Fig 7d; Fig 7e; Fig 7f, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acoustic Wave-Powered Durable Icephobic Duplex Coating Design with Superior Deicing Performance

  • Moral, Jaime del
  • Haworth, Luke
  • Montes, Laura
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • Rico, Víctor J.
  • Czermak, Triana
  • Carreño, Francisco
  • García-Gallego, Paloma
  • Mora, Julio
  • López-Santos, Carmen
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Fu, Yongqing
Piezoelectric thin film-based surface acoustic wave (SAW) deicing technology has recently emerged as an attractive and energy-efficient alternative with direct applications across multiple industrial sectors. However, the generation of SAWs on piezoelectric thin films, such as ZnO, faces diverse challenges, including its low long-term stability and variable wetting properties upon exposure to UV radiation and other environmental hazards. To overcome these challenges, we propose a bilayer coating design that integrates a diamond-like carbon (DLC) thin film with an atop CFx layer (DLC-CFx). This design is intended to serve as both an anti-icing and a protective coating for ZnO SAW devices built on aluminum substrates, which are specifically selected for critical ice-exposed applications in the aeronautics or wind turbine industries. We demonstrate that, unlike the implementation of single fluorinated polymer layers, such as commercial CYTOP, the DLC-CFx hydrophobic duplex coating effectively protects the ZnO surfaces while maintaining optimal SAW transmission and wave propagation and reducing the fluorine content. The SAW-induced deicing on these devices is achieved through a highly effective mechanism involving the interfacial ice melting, followed by a rapid ice sliding detachment for both small ice droplets and large ice aggregates. Experiments at laboratory scale and in an icing wind tunnel facility reveal that deicing involves SAW activation of the interface between the ice and the DLC-CFx bilayer, as well as an effective thermal contribution resulting from the rapid heat transmission through the aluminum substrate. Our studies demonstrate that the highly conformal deposition of DLC-CFx through a room temperature plasma-assisted method ensures reliability and long-term stability of thin-film-based acoustic wave devices in harsh outdoor conditions., The authors thank the ICMS services Surface Analysis and Surface Wettability Determination and the projects PID2022-143120OB-I00 and TED2021-130916B-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)”, A way of making Europe, Fondos NextGeneration EU, and Plan de Recuperación, Transformación y Resiliencia. This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE) and CSIC Intramural projects, 202460E235 and 202160E002. The work is also funded by the EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) (Grant No. EP/S023836/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Icing monitoring with thickness shear acoustic waves

  • Moral, Jaime del
  • González del Val, Miguel
  • Rico, Víctor J.
  • Sánchez-Valencia, J. R.
  • Mora, Julio
  • García Gallego, Paloma
  • Carreño, Francisco
  • Winkler, Andreas
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Jacob, Stefan
Icing monitoring and ice detection are critical challenges across many industries where ice formation can severely degrade performance or compromise safety. Conventional ice-sensing approaches, such as those based on surface acoustic waves (SAWs), often suffer from limited selectivity, fast saturation, and slow or energy-consuming recovery. In this work, we propose the use of thickness-shear-mode bulk acoustic waves (TSM-AWs) as a selective and robust alternative for monitoring icing phenomena, ranging from frozen sessile droplets to ice accretion in near-real scenarios within aeronautical envelopes. The sensing platform consists of a LiNbO₃ plate activated through lateral-field-excitation electrodes and driven electronically by a Vector or Scalar Network Analyzer. This system reliably detects both freezing conditions and temperature variations. Tracking the evolution of the magnitude of the reflection coefficient, specifically, the resonance peak and shape and frequency of|S11| minimum, of a strongly shear-dominant mode provides a reliable means to characterize and extract both qualitative and quantitative information about icing processes. Finite-element simulations further elucidate the physical mechanisms governing the ice monitoring capabilities. These results position TSM AW devices as promising candidates for a new generation of simple, light-weight, highly sensitive, and robust acoustic wave icing sensors., The authors thank the projects PID2022-143120OB-I00 and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF (FEDER)" A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project DGP_PIDI_2024_02239 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía and Project 202460E235 funded by CSIC. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). The authors acknowledge the Wettability Characterization Service from ICMS for providing access to their facilities. The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (H2020-FETOPEN-2018-2019-2020-01 SoundOfIce)., No
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanisms of De-icing by Surface Rayleigh and Plate Lamb Acoustic Waves

  • Pandey, Shilpi
  • del Moral, Jaime
  • Jacob, Stefan
  • Montes, Laura
  • Gil-Rostra, Jorge
  • Frechilla, Alejandro
  • Karimzadeh, Atefeh
  • Rico, Victor J.
  • Kanter, Raul
  • Kandelin, Niklas
  • López-Santos, Carmen
  • Koivuluoto, Heli
  • Angurel, Luis
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustin R.
Acoustic waves (AW) have recently emerged as an energy‐efficient ice‐removal procedure compatible with functional and industrial‐relevant substrates. However, critical aspects at fundamental and experimental levels have yet to be disclosed to optimize their operational conditions. Identifying the processes and mechanisms by which different types of AWs induce de‐icing are some of these issues. Herein, using model LiNbO3 systems and two types of interdigitated transducers, the e‐icing and anti‐icing efficiencies and mechanisms driven by Rayleigh surface acoustic waves (R‐SAW) and Lamb waves with 120 and 510 μm wavelengths, respectively, are analyzed. Through the experimental analysis of de‐icing and active anti‐icing processes and the finite element simulation of the AW generation, propagation, and interaction with small ice aggregates, it is disclosed that Lamb waves are more favorable than R‐SAWs to induce de‐icing and/or prevent the freezing of small ice droplets. Prospects for applications of this study are supported by proof of concept experiments, including de‐icing in an icing wind tunnel, demonstrating that Lamb waves can efficiently remove ice layers covering large LN substrates. Results indicate that the de‐icing mechanism may differ for Lamb waves or R‐SAWs and that the wavelength must be considered as an important parameter for controlling the efficiency.