Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fully-printed and silicon free self-powered electrochromic biosensors, Towards naked eye quantification

  • Aller Pellitero, Miguel|||0000-0001-8739-2542
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Ruiz, Jules
  • Alonso, Yasmine
  • Lakard, Boris
  • Hihn, Jean-Yves
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • del Campo, F. Javier|||0000-0002-3637-5782
Electrochromic materials are becoming increasingly important in analytical devices and applications. Their opto-electronic properties make them particularly useful in the development of electronics-free, self-powered sensors. However, the mass manufacture of such devices is often limited by the need for transparent electrodes and liquid electrolyte systems. The self-powered biosensor presented here overcomes these limitations by means of a coplanar construction and a gel electrolyte. This configuration enables an effective separation between the sample and the electrochromic component, which allows the naked eye readout of the analyte concentration even if coloured or dark samples, such as blood, are used. This lack of contact between sample and electrochromic material also prevents the action of possible interferents on the electrochromic display, which is an additional advantage. Moreover, because the device is entirely screen-printed, its mass production is also feasible. The fabricated device features a glucose biosensor connected to a Prussian-Blue electrode, displaying a dynamic range between 2.5 mM-10 mM that makes it suitable for blood testing and diabetes screening.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A self-powered skin-patch electrochromic biosensor

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Río-Colín, Diego
  • Azizkhani, Haniyeh
  • Aller Pellitero, Miguel|||0000-0001-8739-2542
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • del Campo, F. Javier|||0000-0002-3637-5782
One of the limitations of many skin-patch wearable sensors today is their dependence on silicon-based electronics, increasing their complexity and unit cost. Self-powered sensors, in combination with electrochromic materials, allow simplifying the construction of these devices, leading to powerful analytical tools that remove the need for external detection systems. This work describes the construction, by screen-printing, of a self-powered electrochromic device that can be adapted for the determination of metabolites in sweat by the naked eye in the form of a 3 × 15 mm colour bar. The device comprises a lactate oxidase and osmium-polymer -based anode connected to a coplanar 3 × 15 mm Prussian Blue, PB, cathode printed over a transparent poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, PEDOT:PSS electrode. An ion-gel composed of Poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-co-HFP, a gelling agent, and ionic liquid 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate, EMIM-Tf, effectively separates the cathode display from the biosensing anode, protecting it from the sample. Despite its cathodic electrochromism, the PEDOT:PSS has a transmission above 90% and does not mask the Prussian Blue colour change because the cathode does not operate below 0 V vs Ag/AgCl at any time. The sensor displays lactate concentrations in the range of 0-10 mM over the length of the electrochromic display, which has a contrast ratio of 1.43. Although full response takes up to 24 min, 85% of the colour change is displayed within 10 min.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Screen-printable electrochromic polymer inks and ion gel electrolytes for the design of low-power, flexible electrochromic devices

  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Aller Pellitero, Miguel|||0000-0001-8739-2542
  • del Campo, F. Javier|||0000-0002-3637-5782
  • Guirado, Gonzalo|||0000-0003-2128-7007
We have developed electrochromic inks and electrolyte materials to enable mass production of flexible electrochromic displays (ECDs) and other optoelectronic devices by screen printing. Here we present a new screen-printable ink incorporating electrochromic polymer, poly(3,4-propylenedioxythiophene)bis(ethylhexyloxy), referred to here as ECP-Magenta, and antimony-doped tin oxide (ATO/TiO) particles to facilitate electron transport. Their dispersion in a P(VDF-co-HFP) binder leads to the formation of a new electrochromic ink that is suitable for screen printing. This strategy opens the door to the preparation of similar electrochromic inks based on other organic or polymeric compounds. This approach is scalable and can applied to different fields. Ion gels (IGs) composed of P(VDF-co-HFP) and room temperature ionic liquids (RTILs) are promising solid-state electrolytes with high ionic conductivity, flexibility, elasticity and eco-friendliness. The electrochemical features of different ion gels were analyzed as a function of composition and nature of the ionic liquid. Hence, new formulations of IGs were developed, evaluated by Electrochemical Impedance Spectroscopy, Cyclic Voltammetry, before being incorporated into ECDs. The electrochromic performance of ECP-Magenta ink combined with the RTIL-based IG was evaluated by terms of spectroelectrochemistry showing that fully flexible ECD operating at voltages below 1 V can be screen-printed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochromic biosensors based on screen-printed Prussian Blue electrodes

  • Aller Pellitero, Miguel|||0000-0001-8739-2542
  • Fremeau, Joséphine
  • Villa, Rosa|||0000-0003-2735-3204
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Lakard, Boris
  • Hihn, Jean Yves
  • del Campo, F. Javier|||0000-0002-3637-5782
Prussian Blue (PB)-modified graphite screen-printed electrodes are increasingly being used in electrochemical biosensors. However, they do not allow the observation of the electrochromism of PB. This work presents the construction of PB-based, electrochromic screen-printed biosensors. Although electrically more resistive than their graphite counterparts, these new PB-based electrodes enable both the amperometric and colorimetric detection of hydrogen peroxide. This is the first time that this has been achieved using screen-printed electrodes, and we demonstrate it spectroelectrochemically on a glucose biosensor. The biosensor electrochemical performance equals that of previously reported PB/graphite electrodes, being able to detect down to 4 μM H2O2 and 54 μM glucose. At the same time, and in contrast to PB/graphite electrodes, the new PB-based electrodes afford the optical detection of these two analytes down to 1.2 μM and 15 μM, respectively. The dynamic ranges of the glucose biosensors obtained at the PB-based electrodes are 0.1-1 mM (amperometric) and 0.025-2.5 mM (Colorimetric), matching the physiological glucose concentration range in body fluids other than blood or serum.