Pasar al contenido principal

APLICACIONES MEDIOAMBIENTALES Y ENERGETICAS DE LA TECNOLOGIA ELECTROQUIMICA

CTQ2017-90659-REDT

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organophosphorus pesticides (chlorfenvinphos, phosmet and fenamiphos) photoelectrodegradation by using WO3 nanostructures as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The photoelectrocatalytic (PEC) degradation of recalcitrant and toxic organophosphorus pesticides, fenamiphos, chlorfenvinphos and phosmet, has been performed by using an innovative WO3 nanostructure as photoanode. The nanostructure has been synthesized by anodization in acidic media in the presence of a very small amount (0.05 M) of H2O2, and its composition as well as its photoelectrochemical properties have been characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction as composition technique and photoelectrochemical impedance spectroscopy as photoelectrochemical analysis. After 24 h of experiment, a degradation of 95% of chlorfenvinphos, 99.9% of phosmet and 100% of fenamiphos has been achieved following pseudo-first order kinetics, indicating the good PEC efficiency of this WO3 nanostructure. Moreover, different intermediates have been identified by means of Ultra-High Performance Liquid Chromatograph coupled to a Time of Flight and Mass Spectrometer (UHPLC-Q-TOF/MS) for each of the pesticides after 24 h of photoelectrocatalytic degradation. With these identified compounds, a degradation route has been proposed for each of the pesticides in which they are decomposed into other smaller and less toxic molecules., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019-105844RB-I00) and for the cofinance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana and European Social Fund for its support in the UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044) . Gemma Rosello Marquez also thanks the Generalitat Valenciana for the predoctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the behaviour of Atrazine removal from water using fabrics as anodes and Cathodes

  • Hamous, Hanene
  • Khenifi, Aicha
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] This study examines the degradation of atrazine (ATZ) with Pt-modified textile electrodes using an electrochemical method that is comparatively studied in two electrochemical cell configurations: cells with separated anodic and cathodic compartments (divided configuration); and without any separation (undivided configuration). The influence of the presence of chloride ions was studied. The best results were obtained when an undivided cell was used. The morphology and composition of the dispersed Pt coatings were analyzed using field emission scanning electron microscopy (FESEM) and Energy Dispersive X-Ray Analysis. The FESEM analyses confirmed that the textile surface was effectively modified by the electrocatalytic material. High performance liquid chromatography, gas chromatography mass spectrometry, and spectroscopic methods were used to follow the evolution of major oxidation products. Total organic carbon, chemical oxygen demand, and total nitrogen were used to evaluate the degradation efficiency of treated aqueous solutions. The experimental results obtained indicate that the efficiency of the electrochemical treatment was high with a low energy consumption when using electrodes based on textile materials, such as anodes or as cathodes (in particular, in electrolysis without compartment separation). All these can be produced at very competitive prices, Spanish Agencia Estatal de Investigacion (AEI) and European Union (FEDER funds) are acknowledged for the financial support (contracts MAT 2016-77742-C2-1-P and CTQ 2017-90659-RED). Chemviron Carbon who kindly donated the FlexzorbTM FM10 activated carbon fabrics and Funding for open access charge, CRUE-Universitat Politècnica de València, are acknowledged too
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Degradation of Diazinon based on photoelectrocatalytic technique using enhanced WO3 nanostructures: Mechanism and pathway

  • Roselló-Márquez, Gemma
  • Fernández-Domene, Ramón Manuel
  • Sánchez-Tovar, Rita
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, a resistant and toxic pesticide called diazinon was degraded through the photoelectrocatalysis (PEC) technique using tungsten oxide (WO3) nanostructures, applying an external bias of 1VAg/AgCl and simulated solar illumination. For this, WO3 nanostructures have been synthesized using electrochemical anodization in 0.05 M hydrogen peroxide and 1.5 M of different acidic electrolytes: H2SO4, CH4O3S or HNO3. Morphology, composition and crystallinity of the samples were evaluated through Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and Raman Spectroscopy. Then, the photoelectrochemical properties of the samples were analyzed by Photo-Electrochemical Impedance Spectroscopy (PEIS). The conclusion obtained with these studies was that the nanostructures obtained in the CH4O3S-H2O2 electrolyte presented better photoelectrochemical behavior than the others. The degradation process was checked by UV-Visible, and through Ultra High-Performanc liquid Chromatography and Mass Spectrometry (UHPLC-Q-TOF/MS) the courses of the experiments have been controlled and five possible degradation intermediates have been identified. Finally, after 24 h of experiment, 90% degradation efficiency has been achieved, since it has been possible to decrease from 20 ppm to 2 ppm., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019105844RB-I00) in the acquisition of Laser Raman Microscope (UPOV083E-012) and for the co-finance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its support in the Atomic Force Microscope and UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044). Ramon M. Fernandez Domene also express gratitude to the Universitat Politecnica de Valencia (UPV) for the post-doctoral granting (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the pre-doctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Effect of chloride im the electrochemiscal treatment of the trichromy procion HEXL [Dataset]

  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Fernández Sáez, Javier
  • Cases, Francisco|||0000-0001-8105-4489
[EN] The resulting solutions from the cotton fabrics dyeing using the trichromy Procion HEXL, with NaCl as electrolyte, were electrochemically treated. These dyes have two azo groups as chromophores and two monochlorotriazinic groups as reactive groups in their structure. The combined oxidation/reduction at 125 mA cm-2 in a filter-press cell without compartment separation was carried out using an anode of Ti/SnO2eSbePt and a cathode of stainless steel. This procedure has been effective in previous experiments using sulphate as electrolyte. A significant decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) was obtained. Moreover, the process took place efficiently. The average oxidation state (AOS) and the carbon oxidation state (COS) data confirmed the presence of stable oxidized intermediates in the electrolysed solution. The chromatography and the UVeVisible spectrophotometry assays indicated that full decolourisation is obtained at a loaded charge of around 0.81 Ah L-1 which is associated with an electrical energy per order (EEO) of 1.20 kWh m-3., The authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P and Red E3Tech CTQ2017-90659-REDT). The authors wish to acknowledge Tim Vickers for help with the English revision and Texcoy S.L. company (Spain) where the dyeing processes were done.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of the Electrochemical Properties of an Open-Pore Graphite Foam with Electrochemically Reduced Graphene Oxide and Alternating Current Dispersed Platinum Particles

  • Fernández Sáez, Javier
  • Molina, José Miguel
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] This paper aimed to improve the electrochemical activity of a pitch-derived open-pore graphite foam (GF) by an electrochemical coating of reduced graphene oxide (RGO) and platinum particles without significantly affecting its 3D-structure. RGO was synthesized using cyclic voltammetry (CV) from a 3 g L(-1)GO and 0.1 M LiClO(4)solution. For the electrodeposition of Pt particles, an alternating current method based on electrochemical impedance spectroscopy (EIS) was used. A sinusoidal voltage from a fixed potential Ei was varied following a selected amplitude (Delta E-ac= +/- 0.35 V) in a frequency range of 8 Hz <= f(i)<= 10Hz, wherei= 500. This method proved its efficiency when compared to the traditional CV by obtaining more highly electroactive coatings in less synthesis time. For samples' characterization, physical measures included permeability, pressure drop, and nitrogen adsorption isotherms. The electrochemical characterization was performed by CV. The surface morphology and chemical composition were examined using field emission electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), respectively. RGO improved the electron transfer rate constant of GF, and a more homogeneous coating distribution of reduced size Pt particles was obtained., This research was funded by the Spanish Agencia Estatal de Investigación (AEI) and the European Union (FEDER funds) contracts (MAT2016-77742-C2-1-P, MAT2016-77742-C2-2-P). Financial support of Network E3TECH (CTQ2017-90659-REDT) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chloride on the one step electrochemical treatment of an industrial textile wastewater with tin dioxide anodes. The case of trichromy Procion HEXL

  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández, Javier
[EN] The resulting solutions from the cotton fabrics dyeing using the trichromy Procion HEXL, with NaCl as electrolyte, were electrochemically treated. These dyes have two azo groups as chromophores and two monochlorotriazinic groups as reactive groups in their structure. The combined oxidation/reduction at 125 mA cm¿2 in a filter-press cell without compartment separation was carried out using an anode of Ti/SnO2¿Sb¿Pt and a cathode of stainless steel. This procedure has been effective in previous experiments using sulphate as electrolyte. A significant decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) was obtained. Moreover, the process took place efficiently. The average oxidation state (AOS) and the carbon oxidation state (COS) data confirmed the presence of stable oxidized intermediates in the electrolysed solution. The chromatography and the UV¿Visible spectrophotometry assays indicated that full decolourisation is obtained at a loaded charge of around 0.81 Ah L¿1 which is associated with an electrical energy per order (EEO) of 1.20 kWh m¿3., The authors wish to thank the Spanish Agencia Estatal de Investigacion (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P and Red E3Tech CTQ2017-90659-REDT). The authors wish to acknowledge Tim Vickers for help with the English revision and Texcoy S.L. company (Spain) where the dyeing processes were done.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V-Ag/AgCI and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH4O3S-0.05 M H2O2 electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H2SO4-0.05 M H2O2. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Carbon textiles electrodes modified with RGO and Pt nanoparticles used for electrochemical treatment of azo dye [Dataset]

  • Cases, Francisco|||0000-0001-8105-4489
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Khenifi, Aicha
  • Hamous, Hanene
[EN] The efficiency of Orange G (OG) azo dye degradation using an electrochemical method under potentiostatic conditions has been comparatively studied in two electrolytic cells (divided and undivided cells) in the presence or absence of chloride ions with Pt-modified textile electrodes. The morphology of the carbon-based electrodes with nanoparticles of platinum electrochemically dispersed on their surface was analyzed using field emission scanning electron microscopy (FESEM) and EDX analysis. The FESEM analyses confirmed that the textile surface was coated by Pt nanoparticles. According to the experimental results obtained, when the same solutions are comparatively treated with the two cells, the undivided cell always gives a quicker decolorization than the divided cell – and the decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) confirms this result. The degree of OG removal was monitored by spectroscopic methods and high-performance liquid chromatography (HPLC). The results indicate that that full best dye removal is obtained at a loaded charge of around 0.17 Ah L−1 which is associated with an electrical energy per order (EEO) of 0.189 kW h m−3 order−1. Based on the results obtained, the electrochemical process with TCRGO-Pt electrodes could be useful as a pretreatment technique or treatment for decolorizing wastewaters containing dyes., The authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P) and Chemviron Carbon who kindly donated the FlexzorbTM FM10 activated carbon fabrics. The invitation by the E3TECH Spanish Network of Excellence (CTQ2017- 90659-REDT (MEIC/AEI)) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon textiles electrodes modified with RGO and Pt nanoparticles used for electrochemical treatment of azo dye.

  • Hamous, Hanene
  • Khenifi, Aicha
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] The efficiency of Orange G (OG) azo dye degradation using an electrochemical method under potentiostatic conditions has been comparatively studied in two electrolytic cells (divided and undivided cells) in the presence or absence of chloride ions with Pt-modified textile electrodes. The morphology of the carbon-based electrodes with nanoparticles of platinum electrochemically dispersed on their surface was analyzed using field emission scanning electron microscopy (FESEM) and EDX analysis. The FESEM analyses confirmed that the textile surface was coated by Pt nanoparticles. According to the experimental results obtained, when the same solutions are comparatively treated with the two cells, the undivided cell always gives a quicker decolorization than the divided cell ? and the decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) confirms this result. The degree of OG removal was monitored by spectroscopic methods and high-performance liquid chromatography (HPLC). The results indicate that that full best dye removal is obtained at a loaded charge of around 0.17 Ah L?1 which is associated with an electrical energy per order (EEO) of 0.189 kW h m?3 order?1. Based on the results obtained, the electrochemical process with TCRGO-Pt electrodes could be useful as a pretreatment technique or treatment for decolorizing wastewaters containing dyes., The authors wish to thank the Spanish Agencia Estatal de Investigaci?n (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P) and Chemviron Carbon who kindly donated the FlexzorbTM FM10 activated carbon fabrics. The invitation by the E3TECH Spanish Network of Excellence (CTQ2017-90659-REDT (MEIC/AEI) ) is kindly acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Degradation of Diazinon through photoelectrocatalytic technique with WO3 nanostructures [Dataset]

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Electro-Fenton degradation of a ternary pharmaceutical mixture and its application in the regeneration of spent biochar

  • Puga Pazo, Antón
  • Moreira, Manuela M.
  • Figueiredo, Sónia A
  • Delerue Matos, Cristina
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, This study proposed an integrated valorisation system, by combining adsorption and electro-Fenton processes for fast and effective micropollutant remediation of a complex pharmaceutical mixture. The pharmaceuticals venlafaxine, fluoxetine and trazodone, commonly detected in the environment (river water and sediment), were selected in this study as target pollutants. Initially, the electro-Fenton degradation process of the ternary mixture was optimised. For this, a Box-Behnken experimental design was used and the degradation of each pollutant, as a response function, was evaluated using three key operational process parameters (iron concentration, current intensity and solution pH). The pharmaceutical mixture was removed by total adsorption onto the biochar, the regeneration of which was then carried out under the optimal electro-Fenton conditions (0.24 mA, 0.33 mM Fe2+ and pH 3.2). In addition, different options in relation to the presence of iron were considered: i) iron dissolved in aqueous solution; ii) iron supported on the biochar; iii) no addition of iron (“self-cleaning”). The results confirmed that the natural content of iron in the biochar was enough to catalyse the electro-Fenton regeneration. The adsorption-electro-Fenton regeneration process was repeated over several cycles with no reduction in the efficiency of either process. Finally, this combination (adsorption and electro-Fenton process) was tested using an aqueous matrix from a wastewater treatment plant., Ministerio de Economía y Competitividad | Ref. CTM2017- 87326-R, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. UID /50006/2020, Fundação para a Ciência e a Tecnologia | Ref. CEECIND/02702/2017, Ministerio de Economía y Competitividad | Ref. CTQ2017-90659-REDT
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Iron-loaded catalytic silicate adsorbents: synthesis, characterization, electroregeneration and application for continuous removal of 1-butylpyridinium chloride

  • Ouiriemmi , Imen
  • Diez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
This research proposes the application of iron-loaded sepiolite (S-Fe) as a catalytic adsorbent for the unreported 1-butylpyridinium chloride ([bpy] Cl) treatment in an aqueous medium. Initially, sepiolite was selected as an inexpensive and efficacious adsorbent for [bpy] Cl elimination. After that, sepiolite was loaded with iron for the subsequent electro-Fenton (EF) regeneration treatment. Once kinetic and isotherm studies were performed, providing respectively almost instantaneous adsorption (20 min) and an uptake of 22.85 mg/g, [bpy] Cl adsorption onto S-Fe was studied in continuous mode. The obtained breakthrough curve was analyzed using three standard breakthrough models, being Yoon–Nelson and Thomas the most suitable adjustments. Afterwards, S-Fe regeneration by the EF process was conducted using this iron-loaded silicate material as a heterogeneous catalyst. Under optimized operational conditions (current intensity 300 mA and Na2SO4 0.3 M), complete adsorbent regeneration was achieved in 10 h. The total mineralization of [bpy] Cl was reached within 24 h and among seven carboxylic acids detected, oxalic and acetic acids seem to be the primary carboxylic acids produced by [bpy] Cl degradation. Finally, S-Fe was efficiently used in four consecutive adsorption–regeneration cycles without a noticeable reduction in its adsorption capacity, opening a path for future uses., Ministerio de Economía, Industria y Competitividad | Ref. CTQ2017-90659-REDT, Xunta de Galicia | Ref. ED481B 2019/091, Ministerio de Ciencia, Innovación y Universidades | Ref. CTM2017-87326-R
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the activity and stability of Sb2O3/Sb nanoparticles for the electroreduction of CO2 toward formate

  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of new electrocatalysts with improved properties for the electrochemical reduction of CO2 is being the objective of innumerable contributions. In this contribution, the electrochemical reduction of CO2 to formate on novel carbon-supported antimony nanoparticles (Sb/C NPs) is studied. The carbon-supported Sb2O3/Sb nanoparticles were synthesised using a simple methodology at room temperature and characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The Sb2O3/Sb/C electrodes were prepared by air-brushed onto a carbon paper and were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The Sb2O3/Sb/C electrodes were also electrochemically characterized by cyclic voltammetry and displayed a clear activity for CO2 electroreduction. To evaluate the properties of the electrodes for the reduction of CO2, electrolyses at different potentials were systematically conducted. Hydrogen and formate were the only products found. The faradic efficiency towards formate was found to be about 20%. This FE was in good agreement with previous finding obtained with comparable system. Interestingly, 24-hour tests were carried out to analyse the stability of the material under working conditions. The results indicate that Sb2O3/Sb-based electrodes display a remarkably better stability than other nanostructured electrocatalysts such as Sn or Bi.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical tools to disclose the electrochemical reduction mechanism of CO2 in aprotic solvents and ionic liquids

  • Mena, Silvia
  • Ribas, Esteve
  • Richart, Clara
  • Gallardo, Iluminada
  • Faraudo, Jordi
  • Shaw, Scott K.
  • Guirado, Gonzalo
Carbon dioxide (CO2) plays a key role in controlling the temperature of the Earth. But the increase in the concentration of CO2 in the atmosphere brings with it a series of consequences, originating several environmental problems. The use of electrochemical, spectroscopic and molecular dynamics techniques are useful toolkits to valorize carbon dioxide, and to know the reduction mechanism as a function of CO2 concentration, the cathode nature, and the electrolyte. This manuscript will be mainly centered in the use of ionic liquids (IL) for efficient CO2 capture and valorization into different valuable products thanks to the CO2 electrochemical reduction. In this sense, spectroelectrochemistry based on cyclic voltammetry coupled with Polarization Modulation-Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) and Infrared Reflection-Absorption Spectroscopy (IRRAS) appear to be an efficient instrument to follow the CO2 reactivity in imidazolium ionic liquids. Finally, we present molecular dynamics paired with cyclic voltammetry in order to calculate the diffusion coefficient of CO2 and the number of electrons involved in its reduction process, respectively. Therefore, the current research opens the door to the use of theoretical-experimental approaches altogether to determine how is the CO2 reduction mechanism. The CO2 reduction products in function of the solvent and nature of the cathode is suggested, proving that the product obtained from the electrochemical reduction of CO2 depends on the electrode material and the solvent., The authors thank the Ministerio de Ciencia e Innovación of Spain for financial support though the projects CTQ 2015-65439-R and PID2019-106171RB-I00. SM acknowledges the Autonomous University of Barcelona for her predoctoral PIF grant. SKS thanks the University of Iowa Department of Chemistry for support of this project. The invitation by the E3TECH Spanish Network of Excellence (CTQ2017-90659-REDT (MEIC/AEI)) is also kindly acknowledged. JF acknowledges CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer and financial support from MINECO Severo Ochoa programme, Grant CEX2019-000917-S. We thank Dr Piotr Kubisiak for sharing his datafiles with us., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sustainable and efficient electrosynthesis of naproxen using carbon dioxide and ionic liquids

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Gallardo, Iluminada|||0000-0003-3962-4745
  • Guirado, Gonzalo|||0000-0003-2128-7007
The use of CO2 as a C1 carbon source for synthesis is raising increasing attention both as a strategy to bring value to carbon dioxide capture technologies and a sustainable approach towards chemicals and energy. The presented results focus on the application of electrochemical methods to incorporate CO2 into organic compounds using ionic liquids as electrolytes, which provides a green alternative to the formation of C-C bonds. In this sense, the current manuscript shows that Naproxen (6-Methoxy-α-methyl-2-naphthaleneacetic acid) can be synthetizing in high yield (89%) and conversion rates (90%) through an electrocarboxylation process using CO2 and ionic liquids. The role of the cathode and solvent, which can potentially enhance the synthesis, is also discussed. The "green" route described in the current work would open a new sustainable strategy for the electrochemical production of pharmaceutical compounds.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical tools to disclose the electrochemical reduction mechanism of CO2 in aprotic solvents and ionic liquids

  • Mena Fernández, Silvia|||0000-0002-2800-2388
  • Ribas Saurí, Esteve|||0000-0003-4368-5014
  • Richart, Clara
  • Gallardo, Iluminada|||0000-0003-3962-4745
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Shaw, Scott K.
  • Guirado, Gonzalo|||0000-0003-2128-7007
Carbon dioxide (CO2) plays a key role in controlling the temperature of the Earth. But the increase in the concentration of CO2 in the atmosphere brings with it a series of consequences, originating several environmental problems. The use of electrochemical, spectroscopic and molecular dynamics techniques are useful toolkits to valorize carbon dioxide, and to know the reduction mechanism as a function of CO2 concentration, the cathode nature, and the electrolyte. This manuscript will be mainly centered in the use of ionic liquids (IL) for efficient CO2 capture and valorization into different valuable products thanks to the CO2 electrochemical reduction. In this sense, spectroelectrochemistry based on cyclic voltammetry coupled with Polarization Modulation-Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) and Infrared Reflection-Absorption Spectroscopy (IRRAS) appear to be an efficient instrument to follow the CO2 reactivity in imidazolium ionic liquids. Finally, we present molecular dynamics paired with cyclic voltammetry in order to calculate the diffusion coefficient of CO2 and the number of electrons involved in its reduction process, respectively. Therefore, the current research opens the door to the use of theoretical-experimental approaches altogether to determine how is the CO2 reduction mechanism. The CO2 reduction products in function of the solvent and nature of the cathode is suggested, proving that the product obtained from the electrochemical reduction of CO2 depends on the electrode material and the solvent.