Pasar al contenido principal

FOTONICA HOLOGRAFICA DE NUEVA GENERACION APLICADA A BIOSENSADO Y ENERGIA EFICIENTE

PID2019-106601RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 87
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Gutiérrez-Ramírez, Manuel
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • Esquerdo Lloret, Tomás Vicente
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N¿-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated., This research was developed under project PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021- 1231240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program) funded by Generalitat Valenciana, Spain; and under project UAFPU20-23 funded by Universidad de Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-performance liquid chromatography and UV-visible measurements to optimize the storage of volume holograms in hydrogels

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Cárdenas, Daniel
  • Nieto-Rodríguez, Belén
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The storage of time-stable holographic gratings in photohydrogels when the material is immersed in liquid media represents a great challenge at present. A very important stage in the process of storing holograms in photohydrogels are the washing stages to eliminate the remains of the components that have not reacted in the photochemical reaction. The main goal of this work is focusing on the study of the optimization of the washing stages of the photohydrogels based on acrylamide and N,N¿-methylenebis(acrylamide) once unslanted transmission holograms have been stored. For the purpose of determining the compositions of the wash solutions, High-Performance Liquid Chromatography and UV-visible measurements have been employed in our system. PBST and DMSO:H2O 6:4 (v/v) are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38.0 and 27.6% are reached when PBST and DMSO:H2O 6:4 are employed, respectively., Work funded by Ministerio de Ciencia e Innovacion, Spain, under project PID2019-106601RB-I00; by Generalitat Valenciana under projects GRISOLIAP/2019/143, CIDEXG/2022/60, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program), Spain. K. Berramdane thanks to the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain). M. I. Lucio acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Processing of Holographic Hydrogels in Liquid Media: A Study by High-Performance Liquid Chromatography and Diffraction Efficiency

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Zezza, Paola
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The storage of time-stable holographic gratings in hydrogel matrices when the material is immersed in aqueous media is a real challenge at present. The optimization of the storage stages of the holograms must be properly investigated to identify the most suitable development processes. For this reason, this work is focused on the study of the optimization of the washing stages of the hydrogels based on acrylamide and N,N'-methylenebis(acrylamide) once unslanted transmission holograms have been stored. High-performance liquid chromatography and UV-visible measurements have been employed in our system to analyze the composition of the washing solutions. PBST and DMSO:H2O are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38 and 27.6% are reached when PBST and DMSO:H2O are employed, respectively, for the washing process. Holograms show temporal stability after being stored immersed in PBST at 4 degrees C for 4 days., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, Spain, under project PID2019-106601RB-I00 and AdBiHol-PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; Generalitat Valenciana, Spain, under projects CDEIGENT/2018/024, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program). M. I. Lucio acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. M. I. Lucio and A. Belendez acknowledge the Programa Propio para el fomento de la I + D + I del Vicerrectorado de Investigacion y Transferencia de Conocimiento of the Universidad de Alicante for the grant "Ayudas para estancias de personal investigador invitado" (INVA20-02). K. Berramdane thanks to the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Storage Optimization of Transmission Holographic Gratings in Photohydrogels

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Navarro-Fuster, Victor
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development and optimization of holographic materials represent a great challenge today. These materials must be synthesized according to the characteristics that are desirable in photonic devices whose application is the object of investigation. In certain holographic sensors and biosensors, it is essential that the recording material be stable in liquid media. Furthermore, the holographic gratings stored in them must have temporal and structural stability, so that they can act as transducers of the analytical signal. Therefore, it is essential to optimize its storage in terms of the chemical composition of the material and the optical parameters of recording. This work focuses on the study of the storage optimization of unslanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N¿-methylenebis(acrylamide). Hydrogel matrices, also composed of acrylamide and N,N¿-methylenebis(acrylamide), with different degrees of cross-linking were used and analyzed by scanning electron microscopy and UV¿visible spectroscopy. The best results in terms of diffraction efficiency were reached for hydrogel matrices with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio between 19.9 and 26. This relationship was also optimized in the incubator solution used to incorporate the components necessary for the formation of the holograms in the hydrogel matrices. The maximum diffraction efficiency, about 35%, was achieved when using an incubation solution with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio of 4.35. The influence of the physical thickness of the hydrogel layers, the intensity, and the exposure time on the diffraction efficiency was also investigated and optimized. In addition, the behavior of the hologram was analyzed after a washing stage with PBST. A simple model that considered the effects of bending and attenuation of holographic gratings was proposed and used to obtain the optical parameters of the holograms., This research was funded by Ministerio de Ciencia, Innovación y Universidades, Spain, under project Wearopsens-PID2022-140653OB-I00, PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021-1231240B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; and by Generalitat Valenciana, Spain, under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094, and IDIFEDER/2021/014 (cofunded by the European Union through the FEDER Program). M.I.L. acknowledges her Juan de la Cierva Incorporación grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. K.B. thanks the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: 50th anniversary of Dennis Gabor’s Nobel Prize: Part II. An engineering perspective

  • Sheridan, John T.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The holographic principle, discovered by Gabor, and realized by Leith & Upatnieks and Denisyuk is discussed. The intrinsic value of this idea and its continuing ability to motivate and inspire engineers and applied physicists is reviewed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adulterant Detection in Peppermint Oil by Means of Holographic Photopolymers Based on Composite Materials with Liquid Crystal

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Diffraction gratings are recorded in a holographic photopolymer containing nematic liquid crystal and peppermint oil. The presence of the oil modifies the polymerization and the holographic response. The composite containing oil adulterated with triethyl citrate obtains a diffraction efficiency related to the oil’s purity. The results obtained suggest the possibility of developing a holographic chemical analysis method for quality control of raw materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adulterant detection in peppermint oil by means of holographic photopolymers based on composite materials with liquid crystal

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we use a holographic dispersed liquid crystal (HPDLC) to detect a substance added as adulterant to peppermint oil. Volume diffraction gratings are recorded in two samples of HPDLC with and without peppermint oil respectively using a Nd:YAG laser tuned at 532 nm. The adulterant is detected due to the differences obtained for the maximum diffraction efficiency, which are related to the purity of the oil.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Examination of the composition of incubator solutions employed to preserve unslanted transmission holograms within photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Lloret, Tomás
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holography's recent surge lies in its capacity to store detailed 3D objects in cost-effective photosensitive materials, revolutionizing fields like renewable energy and biodetection. With laser tech and optical systems already refined, attention shifts to enhancing holographic materials. Stability becomes paramount, especially in biosensing, where hydrogel matrices prove advantageous as binders. These 3D polymers, adept at retaining water, can be chemically tailored to alter their holographic traits based on environmental cues. This study aims to refine transmission hologram storage in photohydrogels by tweaking the photosensitive solution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Storage Optimization of Transmission Holographic Gratings in Photohydrogels

  • Berramdane, Kheloud
  • Lucío, María Isabel
  • Ramirez, Manuel G.
  • Navarro-Fuster, Víctor
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The development and optimization of holographic materials represent a great challenge today. These materials must be synthesized according to the characteristics that are desirable in photonic devices whose application is the object of investigation. In certain holographic sensors and biosensors, it is essential that the recording material be stable in liquid media. Furthermore, the holographic gratings stored in them must have temporal and structural stability, so that they can act as transducers of the analytical signal. Therefore, it is essential to optimize its storage in terms of the chemical composition of the material and the optical parameters of recording. This work focuses on the study of the storage optimization of unslanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N’-methylenebis(acrylamide). Hydrogel matrices, also composed of acrylamide and N,N’-methylenebis(acrylamide), with different degrees of cross-linking were used and analyzed by scanning electron microscopy and UV–visible spectroscopy. The best results in terms of diffraction efficiency were reached for hydrogel matrices with an acrylamide/N,N’-methylenebis(acrylamide) molar ratio between 19.9 and 26. This relationship was also optimized in the incubator solution used to incorporate the components necessary for the formation of the holograms in the hydrogel matrices. The maximum diffraction efficiency, about 35%, was achieved when using an incubation solution with an acrylamide/N,N’-methylenebis(acrylamide) molar ratio of 4.35. The influence of the physical thickness of the hydrogel layers, the intensity, and the exposure time on the diffraction efficiency was also investigated and optimized. In addition, the behavior of the hologram was analyzed after a washing stage with PBST. A simple model that considered the effects of bending and attenuation of holographic gratings was proposed and used to obtain the optical parameters of the holograms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Celebrating holography anniversaries: a historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The year 2022 marks the 75th anniversary of Dennis Gabor’s invention of the holographic method, what he called “microscopy by reconstructed wave-fronts”, as well as the 60th anniversary of the publication in 1962 of two seminal papers in the field of holography: the introduction of the reflection hologram by Yuri Denisyuk, and the description of the holographic process from the point of view of communication theory by Emmett Leith and Juris Upatnieks. Within the framework of these celebrations, a historical review of the origins of holography is presented with special emphasis on the contributions of Gabor, Denisyuk and Leith to the development of holography.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Phase-Shift Optimization in AA/PVA Photopolymers by High-Frequency Pulsed Laser

  • Puerto, Daniel
  • Gallego, Sergi
  • Francés, Jorge
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers can be used to fabricate different holographic optical elements, although maximization of the phase-shift in photopolymers has been a challenge for the last few decades. Different material compositions and irradiation conditions have been studied in order to achieve it. One of the main conclusions has been that with continuous laser exposure better results are achieved. However, our results show for the first time that higher phase-shift can be achieved using a pulsed laser. The study has been conducted with crosslinked acrylamide-based photopolymers exposed with a pulsed laser (532 nm). The increment of the phase-shift between the pulsed laser and continuous laser exposure is 17%, achieving a maximum phase-shift of 3π radians and a refractive index shift of 0.0084 at the zero spatial frequency limit, where monomer diffusion does not take place. This allows this photopolymer to be used in large-scale manufacturing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffraction efficiency in reflection holograms stored in photopolymers doped with metallic nanoparticles

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Sirvent-Verdú, Joan Josep
  • Solla-Gullón, José
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the last few years, the interest in storing volume holograms in photopolymers has increased enormously due to their applications in industry, the medical field, security, or renewal energy among others. The production of environmentally compatible photopolymers is one of the main focuses of Holography research. In this work, we have studied how to increase the diffraction efficiency of reflection holograms stored in a low-toxicity PVA-based photopolymer called Biophotopol. The holographic material has been doped with different types of nanoparticles (NPs) to achieve an increase in the refractive index modulation during the recording stage. Metallic NPs, obtained by physical and electrochemical methods have been used. The results obtained with all of them have been compared as a function of the concentration used, the size of the NPs, and the stabilization method used for their synthesis. A considerable increase in diffraction efficiency has been achieved by using NPs in the low-toxicity material. By using high refractive index NPs, the average refractive index of the holographic material increases and consequently the diffraction efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Quality metrics in holographic lenses recorded in a low toxicity photopolymer

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic Lenses (HLs) are holograms obtained from the interference of an object point (object beam) and a plane beam (reference beam). Unlike conventional refractive lenses (RLs), their physical principle is diffraction, and in addition to spectral dependence, they also exhibit angular dependence. One of the main applications of such HLs is their use in AR optical systems such as head mounted displays (HMD). HLs also exhibit aberrations. To measure the impact of these aberrations, diffraction efficiency is not a suitable optical parameter. For this purpose, different quality metrics can be used. In this work, the quality of positive symmetrical and negative asymmetrical HLs has been evaluated by studying different metrics: optical quality metrics (Zernike and Seidel coefficients, RMS for Zernike and Seidel aberrations, and critical pupil fraction (PF); and image quality metrics based on the impulse response of the system (Strehl Ratio (SR), Entropy and cut-off frequency).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design and development of a simple and innovative Optical detection sensor for acetic acid

  • Miloua, Wafaa
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The technology we are developing consists of the use of coordination compounds with metals to carry out the detection of acetic acid, which is a harmful substance for human health and some art works.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • García-Vázquez, José Carlos
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N′-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

General application of the genetic algorithm to the estimation of the Liquid Crystal Director in PA-LC devices

  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Neipp, Cristian
  • Beléndez, Augusto
  • Francés, Jorge
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The study of liquid crystal (LC) director distribution is an important area of research in materials science and technology. Parallel-aligned liquid crystal (PA-LC) devices have been extensively studied due to their applications in liquid crystal displays, optical devices, and sensors. Estimating the LC director distribution is a critical step in designing and optimising PA-LC devices. This work shows the results derived from apply- ing novel optimisation techniques to estimate the liquid crystal (LC) director distribution in parallel-aligned liquid crystal (PA-LC) devices. Moreover, the genetic algorithm (GA) has been applied and compared with the minimisation of the Frank-Oseen free energy through the Euler-Lagrange equations. The GA is a stochastic optimisation technique that can effectively explore the search space and find the global optimum. Overall, this study’s results demonstrate the GA’s effectiveness in estimating the LC director distribution in PA-LC devices. This approach can improve the performance and design of liquid crystal displays, optical devices, and sensors. Furthermore, it can be extended to other fields where the optimisation of complex systems is required. Further research is needed to optimise the GA parameters and to explore its potential in other applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-frequency processing effects on three commercial polymers with different thermal properties under femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Puerto, Daniel
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The response of three of the most used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under irradiation with high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser at λ=515 (1.34 J/cm2) and 1030 (1.70 J/cm2) is reported. Thermal and ablative effects are observed after laser irradiations. The results are compared to a photothermal model that pretends to explain the heat accumulation effect of successive pulses irradiation. Thermal analyses (Modulated Differential Scanning Calorimetry (MDSC) and Thermogravimetry (TG)) are performed and utilized to explain the different behaviour of each polymer. Three different regimes (non-thermal, thermal and saturation) are identified and explained from the model and experimental results. A connection between ablation depth and simulated reached temperature is established. Further studies as micro-Raman analyses on the irradiated area and the dependence of damaged area on the repetition rate are being performed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

CCD and Hartmann-Shack wavefront sensor to analyse holographic lens resolution

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Márquez, Andrés
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, the study and optimization of volume holographic lenses (HLs) stored in low-toxicity photopolymers have a great interest. HLs are now a component of optical imaging systems that are mostly used in head-mounted displays for virtual and augmented reality or as non-image systems in light deflectors and concentrators. One of the most important parameters used when working with imaging systems is the resolution of the optical system. In this work, the similarity between the object and image of negative asymmetrical HLs stored in a low-toxicity photopolymer named Biophotopol has been evaluated theoretically and experimentally. For this purpose, the resolution of the HLs was calculated using the Convolution Theorem. A USAF 1951 test was used as an object and the impulse responses of the HLs were obtained with two different sensors: CCD and Hartmann-Shack (HS) wavefront sensor. In addition, the resolution of the HLs has been obtained by two different methods: one using the Convolution Theorem, using both the CCD and the HS wavefront sensor, and the other by forming the USAF test image on the CCD sensor. Finally, a theoretical study of object-image similarity was carried out using the MSE (mean squared error) metric to evaluate the quantitative experimental results.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimización del proceso de escritura de redes de difracción en PVA/AA con láser de femtosegundos de alta frecuencia

  • Ortuño, Manuel
  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
En este trabajo se estudia la modulación del índice de refracción y las eficiencias de difracción en redes fotopolimerizadas basadas en PVA/AA con reticulante BMA bajo irradiación láser multipulso de femtosegundo (450 fs) a altas frecuencias de repetición (1 kHz-1 MHz) λ=515 nm (12.6 mJ/cm2). La red se escribe mediante un escáner que controla la posición X-Y del haz láser sobre el material procesado con resolución micrométrica y velocidades entre 1 mm/s y 5 m/s. El escáner también contiene una lente f-theta para focalizar el haz, lo que da lugar a un radio de 9 μm a 1/e2 para 515 nm. Esto permite producir redes con periodos de hasta 10 μm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Precise-Integration Time-Domain Formulation for Optical Periodic Media

  • Sirvent-Verdú, Joan Josep
  • Francés, Jorge
  • Márquez, Andrés
  • Neipp, Cristian
  • Alvarez, Mariela L.
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
A numerical formulation based on the precise-integration time-domain (PITD) method for simulating periodic media is extended for overcoming the Courant-Friedrich-Levy (CFL) limit on the time-step size in a finite-difference time-domain (FDTD) simulation. In this new method, the periodic boundary conditions are implemented, permitting the simulation of a wide range of periodic optical media, i.e., gratings, or thin-film filters. Furthermore, the complete tensorial derivation for the permittivity also allows simulating anisotropic periodic media. Numerical results demonstrate that PITD is reliable and even considering anisotropic media can be competitive compared to traditional FDTD solutions. Furthermore, the maximum allowable time-step size has been demonstrated to be much larger than that of the CFL limit of the FDTD method, being a valuable tool in cases in which the steady-state requires a large number of time-steps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Storage optimization of transmission volume holograms in hydrogel matrix

  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Zezza, Paola
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Emerging applications such as holographic sensing [1] require the storage of time-stable volume holographic gratings while the material is immersed in a liquid medium. For this purpose, hydrogels can be used as matrices for the introduction of the necessary components for the hologram formation. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes due to their high swelling capacity. Their liquid permeable structure allows the diffusion of molecules inside their matrix. Unslanted transmission volume phase holographic gratings (TVPHG) with a period of 0.830 μm have been stored in hydrogels based on acrylamide (AAm) and N,N’-methylenebis(acrylamide) (MBA). For this, solutions containing monomer (AAm), crosslinker (MBA) and photoinitiator system (triethanolamine (TEA) and yellowish eosin (YE)) in DMSO:H2O were deposited onto the hydrogel matrices and then exposed with a laser of wavelength 532 nm. TVPHG need to be washed to eliminate the components that do not react during the recording process. With the main objective of optimizing this washing with PBST (phosphate-buffered saline with Tween 20), high-performance liquid chromatography (HPLC) and UV-visible measurements have been employed to analyze the composition of the washing solutions. The recorded holograms were reconstructed using a laser of wavelength 633 nm immediately after the recording process and after each washing stage to obtain the diffraction efficiency (ratio between the intensities of diffracted and incident beams).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lens Resolution Using the Convolution Theorem

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The similarity between object and image of negative asymmetrical holographic lenses (HLs) stored in a low-toxicity photopolymer has been evaluated theoretically and experimentally. Asymmetrical experimental setups with negative focal lengths have been used to obtain HLs. For this purpose, the resolution of the HLs was calculated using the convolution theorem. A USAF 1951 test was used as an object and the impulse responses of the HLs, which in this case was the amplitude spread function (ASF), were obtained with two different methods: using a CCD sensor and a Hartmann Shack (HS) wavefront sensor. For a negative asymmetrically recorded HL a maximum resolution of 11.31 lp/mm was obtained. It was evaluated at 473 nm wavelength. A theoretical study of object-image similarity had carried out using the MSE (mean squared error) metric to evaluate the experimental results obtained quantitatively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Green's method for solving the Helmholtz scalar equation with applications to refractive index media

  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Francés, Jorge
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
In this work, we present a formalism based on scalar Green’s functions to deal with electro-magnetic scattering problems. Although the formulations of the Mie theory and Born approximations in terms of electromagnetic scattering are well known and relevant, they have certain disadvantages; complexity, computational time, few symmetries, etc. Therefore, the study with scalar Green functions allows one to deal with these problems with greater simplicity and efficiency. However, the information provided by the vector formulation is sacrificed. Nevertheless, different cases of electromagnetic scattering of dielectric media with different dimensions, geometries, and refractive indices will be presented. Thus, we will be able to verify the capacity of this scalar method to predict light scattering problems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage studies and optimization of multiplexed holographic lenses with high diffractive efficiency and wide angular response

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Today, the advancement of optical systems that can harness clean and renewable energy sources is a major focus for researchers and innovators worldwide. As we strive to create a sustainable future, this challenge has become increasingly critical to our success. Fresnel lenses are widely used as traditional concentrators, but they have a small acceptance angle, and the reflective elements need continuous maintenance of the surface reflectivity. Transmitting Holographic Optical Elements (HOEs) are an alternative to conventional lenses because they are more economical and versatile. Their material is usually a flexible photopolymer so that the optical element can be attached to different types of support, depending on whether one type of handling is required or another, and they tend to have low weight and volume, as well as a simple way of manufacturing. In addition, also provide an extended focusing area which helps to protect solar cells from heating damage. A theoretical and experimental study on the shrinkage of multiplexed holographic lenses (MHL) that were stored in a low-toxicity photopolymer was carried out. To accomplish the study, a K-space tool was used. Furthermore, an optimization analysis of the angular distance between peaks was performed. To determine efficiency, an evaluation of the short-circuit current under solar illumination with varying incident reconstruction angles was done.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modelling photopolymer behavior as optical recording medium

  • Gallego, Sergi
  • Neipp, Cristian
  • Fernandez, Roberto
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Since photopolymers were first used as a holographic recording medium in the 1970s, one of the most important goals to be achieved was a quantitative understanding of their behaviour. In general, photopolymers are composed of one or more monomers, a binder and a dye that absorbs light in a certain region of the spectrum. The absorbed photons initiate polymerisation in the bright regions creating a concentration gradient compensated by the diffusion of chemical molecules described by Fick’s law. The first models to simulate the etching process in this type of materials were proposed in the early 1990s; they were very simple models where the authors assumed a harmonic in the monomer concentration, a constant rate of polymerisation and diffusion without direct influence of the refractive index of the monomer and the polymer. From this point on, improvements started to be made in the so-called “diffusion models”. One of the most important breakthroughs, proposed by John Sheridan’s research group in 2000, is the non-local behaviour of the photopolymer due to the finite size of the polymer chains. This phenomenon affects the limit of holographic recording resolution. Our research group at the University of Alicante (Spain) had the honour to collaborate with John Sheridan’s group developing new advances in the modelling of photopolymers as an optical recording medium, such as the threedimensional expansion of the models, and the explanation of surface variations or models to explain the recording of diffractive optical elements in this type of materials. In this papSer, we review this collaboration to improve diffusion models applied to photopolymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric analysis of cross-talk phenomena induced by the pixelation in PA-LCoS devices

  • Francés, Jorge
  • Márquez, Andrés
  • Neipp, Cristian
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid crystal on silicon (LCoS) microdisplays are an element commonly found in advanced photonic applications. Phase-only modulation and spatial light modulators (SLMs) use parallel-aligned LCoS (PA-LCoS) microdisplays due to their large resolution and small pixel size. However, the crosstalk between neighbouring pixels induces several phenomena, i.e. the smoothing of the electric field in the interpixel region known as fringing fields, out-of-plane reorientation of the liquid crystal director, and diffraction effects due to the finite pixel grid pattern. These effects degrade the performance in SLM applications. Therefore, a rigorous numerical analysis is carried out based on a full 3D model that estimates the LC director distribution of the PA-LCoS microdisplay through uniform applied voltages. Once the LC director distribution is known, a numerical finite-difference scheme simulates light propagation across the structure. Here, the impact of crosstalk is analysed from the polarimetric point of view for different pixel and interpixel sizes. It has been found that the finite-patterned pixel scheme induces the phenomena previously addressed, degrading the responses of the Stokes vector components S0, and S1 and also the degree of polarization (DOP). Furthermore, the impact over these parameters is generally inversely proportional to the fill factor. To isolate the influence of diffraction, out-of-plane, and fringing fields effects is challenging since all phenomena are mixed in both time and space, however we have found some useful trends.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Green Scalar Function Method for Analyzing Dielectric Media

  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Mena Ortiz, Emilio José
  • Alvarez, Mariela L.
  • Francés, Jorge
  • Neipp, Cristian
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work we present a formalism based on scalar Green’s functions to deal with electromagnetic scattering problems. Although the formulations of the Mie theory and Born approximations in terms of electromagnetic scattering are well known and relevant, they have certain disadvantages: complexity, computational time, few symmetries, etc. Therefore, the study with scalar Green’s functions allows dealing with these problems with greater simplicity and efficiency. However, the information provided by the vector formulation is sacrificed. Nevertheless, different cases of electromagnetic scattering of dielectric media with different dimensions, geometries and refractive indices will be presented. Thus, we will be able to verify the capacity of this scalar method in predicting light-scattering problems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Numerical modeling of H-PDLC devices for diffractive optical elements with variable properties

  • Frencés, Jorge
Holographic polymer dispersed liquid crystal devices (H-PDLC) are involved in many applications, e.g. diffraction lenses, optical data storage, and image capture devices. H-PDLC is based on a light-sensitive monomer and liquid crystal (LC) mixture exposed to an interference pattern. The monomer concentration rises in the illuminated area, whereas in the dark zones, the LC is concentrated, setting up LC droplets of fewer nanometers. Accurate knowledge of the elastic behaviour of the LC director distribution and the influence of the boundaries with the polymer matrix can help to optimise the diffraction efficiency or the angular selectivity of these devices, keeping the driving voltage low. Here, a review of the latest analysis for accurately estimating the director distribution in LC-based devices is shown. This analysis is carried on in three steps. Firstly, an accurate model based on creating a considerably high number of droplets surrounding the polymer matrix fringes is performed. In this step, the user can modify the ratio between the areas filled with LC and polymer and the size and aspect ratio of the droplets. This packing step can be very demanding depending on the thickness of the grating and the domain dimensions considered for the analysis (2D or 3D). Secondly, a formulation based on estimating the director distribution is performed to derive the permittivity tensor from the LC director. Thirdly and last, from the information obtained in the previous step, a Finite-Difference Time-Domain simulation is performed to estimate the electromagnetic field distribution inside the domain considered accurately. The diffraction efficiencies and many indirect parameters can be computed from this rigorous analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: More than three-dimensional images

  • Beléndez, Augusto
  • Gallego, Sergi
  • Márquez, Andrés
  • Ortuño, Manuel
  • Francés, Jorge
  • Colomina-Martínez, Jaume
  • Nájar, Guillem
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography is a broad field of research that interacts with a wide range of disciplines, from physics and chemistry to art through engineering, as shown by the large number of publications that can be found on the subject. Holography is integrated into our daily lives, often associated with the rainbow-like effect on banknotes, credit cards, and ID cards. Let us also consider that holography involves many optical phenomena (coherence, diffraction, interference, analogue and digital recording devices, lasers, materials, etc.). Therefore, holography is an extraordinarily productive and attractive field as a research area. Furthermore, holographic devices facilitate the development of many applications, some of which are reviewed in the present paper.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Liquid Crystal on Silicon devices characterization and applications

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, Phase-only spatial light modulators (SLMs) are widespread in a wide range of fields, from Diffractive Optical Elements to optical tweezers, wavefront coding or optical vortex among others. For this reason, we need a complete characterization of their performance, we have to take into account that apart from the phase retardance introduced, the device presents a certain level of fluctuations or flicker that from our point of view has to be measured. In the first place we have developed and extended version of the classic linear polarimeter. This method uses two intensity measurements to obtain a robust value for the retardance introduced by a waveplate, in our case the waveplate will be the Parallel Aligned LCOS (PA-LCoS) used as a SLM. Our extended version modelized the flicker presented because of the digital addressing scheme and allow us to correct the measurements and evaluate the flicker for certain retardance values. Following the same model for the flicker and by using a Stokes polarimeter we demonstrated that we can obtain the retardance introduced and the flicker for the complete range of the display gray levels.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The role of absorption mechanism on the optimization of processing commercial polymers under high repetition rate femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Puerto, Daniel
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The response of three of the most used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under irradiation with high repetition rate (1 kHz–1 MHz) femtosecond (450 fs) multi-pulse (N = 10–1500) laser at λ = 343 nm, 515 nm (1.40 J/cm2 for both former wavelengths) and 1030 nm (1.70 J/cm2) is reported, obtaining a study on how the absorption mechanism influences the processing efficiency for these materials. Tunable ablation depth and diameters are accomplished by modifying repetition rates at a constant fluence and number of pulses. The results highlight the role of absorption mechanism, repetition rate ranges and thermal properties of the materials for benefiting ablation efficiency. Furthermore, the use of high repetition rates improves the laser processing, reducing extended thermal effects and increasing ablation uniformity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design and development of an innovative and simple optical sensor for the detection of acetic acid

  • Miloua, Wafaa
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The technology we are developing consists of the use of coordination compounds with metals to carry out this detection of Acetic acid. This compound normally reacts with acetic acid changing its colour, making it a suitable compound for use as a detector. The proposed method allows detecting acetic acid in any medium, whether in solution, in the gas phase, in the solid phase, or in any combination of these. Upon contact with the acid, a colour change occurs that can be detected visually or through optical means. After its use, the active medium can be regenerated by a simple procedure and be available again for new use. This allows the creation of simple and intuitive detection devices, usable by non-experts and that can be regenerated and reused. The main advantage of this sensor is to allow the specific detection of acetic acid and quantification of its concentration, using coordination compounds with metals that are present in the yellow dye.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of the introduction of peppermint oil as additive in the composition of HPDLC photopolymer and holographic response obtained

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography is an optical technique that allows the recording and the reconstruction of the wave front of an object; and it permits us to obtain the three dimensional images of a material. The use of photopolymers is justified by their properties such as the higher diffraction efficiency with an acceptable energetic sensitivity, and other special characteristic, which are added just by adding liquid crystal, like the capacity of variation of the electro optical properties by means of an electric field. In this article, attempt has been made to see the influence of the introduction of peppermint oil as additive in the composition of HPDLC to see the different holographic responses. Volume diffraction gratings are recorded in two samples of HPDLC with and without peppermint oil respectively using a Nd:YAG laser tuned at 532 nm. Peppermint oil is used in this study since it.s a naturel oil with specified properties that are compatible with the HPDLC photopolymer. The proprieties related to viscosity, density color and solubility are similar to those of the stander components of the photopolymer Since it is very important to develop material with ecofriendly properties, the use of natural components in these materials can improve properties related to environment as peppermint oil has the similar properties as the other components, and also It can be a good concurrent to replace some of the components to have a more ecofriendly photopolymer Peppermint oil is soluble in the photopolymer. When the oil is added to the composition, the diffraction efficiency is decreased. This could be related to the polymerization or the PIPS process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thermal effects during the recording of holographic diffraction gratings in HPDLC

  • Miloua, Wafaa
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
In this work, we discuss the influence of the temperature on the recording of a hologram in HPDLC samples. We use a standard holographic setup with two symmetric beams from 532 nm solid-state laser, and one beam for the reconstruction of the hologram from a He-Ne laser. During the experimental work, we noticed that some samples still colorless to the naked eye before and after laser exposure (sample 1).whereas other samples become opaque (white color) during laser exposure (sample 2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Green and wide acceptance angle solar concentrators

  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
A low-toxicity photopolymer was employed to prepare holographic solar concentrators (HSCs). The main aim of this study is to obtain a versatile holographic element to concentrate the sunlight from different relative positions of the Sun during the day, avoiding the need of expensive tracking systems. Multiplexed holographic elements that combine symmetric and asymmetric holographic lenses of low frequency (545 l/mm) have been recorded in the same plate to concentrate the sunlight from sunrise to sunset. The holographic behavior of HSCs has been studied by measuring the angular diffraction efficiency at 633 nm (close to the maximum response of silicon cells). The efficiency of the complete system “HSC-solar cell” has been evaluated by measuring the short-circuit current (Isc) under solar illumination at different incident angles. This study overcomes the trade-off between good efficiency and high incident acceptance angle, showing an important breakthrough to obtain wide acceptance angle systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Processing of Holographic Hydrogels in Liquid Media: A Study by High-Performance Liquid Chromatography and Diffraction Efficiency

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Zezza, Paola
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The storage of time-stable holographic gratings in hydrogel matrices when the material is immersed in aqueous media is a real challenge at present. The optimization of the storage stages of the holograms must be properly investigated to identify the most suitable development processes. For this reason, this work is focused on the study of the optimization of the washing stages of the hydrogels based on acrylamide and N,N’-methylenebis(acrylamide) once unslanted transmission holograms have been stored. High-performance liquid chromatography and UV-visible measurements have been employed in our system to analyze the composition of the washing solutions. PBST and DMSO:H2O are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38 and 27.6% are reached when PBST and DMSO:H2O are employed, respectively, for the washing process. Holograms show temporal stability after being stored immersed in PBST at 4 °C for 4 days.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Refection gratings stored in a nanoparticle-doped photopolymer

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Solla-Gullón, José
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Nowadays, the study and optimization of volume holography reflection gratings stored in environmentally compatible photopolymers has a great interest since they can be used as holographic optical elements. One of the main advantages of reflection holograms is that they can be reconstructed using white light. This allows to develop holographic sensors. Unslanted reflection holograms have been stored in an acrylate-poly(vinyl alcohol) based photopolymer development in our research group. With the main objective of increasing the diffraction effciency of reflection holograms, a series of chemical modifcations have been introduced in the same acrylated-based photopolymer. Specifcally, this material has been doped with Platinum nanoparticles (Pt-NP), increasing the refractive index modulation in the recorded diffraction gratings.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlled photothermal ablative processing of commercial polymers minimizing undesired thermal effects under high frequency femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Ramirez, Manuel G.
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
The response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under high repetition rates (1 kHz-1 MHz) with femtosecond (450 fs) multi-pulse laser irradiation at λ = 515 nm (1.4 J/cm2) is reported resulting in a complete study with controlling the ablation depth and minimizing collateral thermal effects. Tunable ablation depth is achieved accurately by varying the repetition rate at a constant fluence. The results are compared to a photothermal model that aims at explaining the heat accumulation effect of successive pulses as a function of the repetition rate and predicts three different heat regimes (non-cumulative, cumulative and saturation). The threshold frequencies for each regime can be estimated from the model, providing control for selecting frequency values and thermal regimes. Thermal analyses are performed to characterize the materials, concluding that thermal parameters are vital for selecting optimal materials and laser processing parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of processing effects under high-frequency femtosecond laser irradiation on three commercial polymers with different thermal properties

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Colomina-Martínez, Jaume
  • Gallego, Sergi
  • Puerto, Daniel
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The behavior of three commonly used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high repetition rate (10 kHz – 1 MHz) femtosecond (450 fs) laser irradiation at λ=515 nm (1.40 J/cm2) is analysed. A study of how repetition rate affects the heat accumulation effects and the processing outcomes on the surface of these polymers is presented, demonstrating a tailored modulation of ablation depth and modified widths through repetition rate variations at constant values of fluence and number of pulses. Micro Raman analyses are conducted to investigate the induced thermal degradation in the surroundings of the ablated regions for processing at different values of repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of the recording of Fibonacci lenses on photopolymers with 3-D diffusion model

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bernabeu, Andrés P.
  • Colomina-Martínez, Jaume
  • Fernandez, Roberto
  • Márquez, Andrés
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work a three-dimensional diffusion model is used to model photopolymers as a recording media. This model allows us to predict the properties of the Diffractive Optical Elements (DOEs) once we recorded into the photopolymer. This model had never been tested with more complex elements, such as multifocal diffractive lenses, as presented in the following in this work. In addition, the model includes; the estimation of the refractive index modulation, the low-pass filtering effect due to the experimental optical setup, and the evolution of the transverse intensity distribution. In this way, the selection of the appropriate material characteristics depending on the intended DOE application is made possible. Specifically, an acrylamide-based PVA/AA photopolymer is simulated using the proposed model. Moreover, coverplating and index matching systems are considered together to avoid the effects of thickness variation. Furthermore, in order to compare their properties using the proposed model, we focus on Fibonacci lenses (FL), a type of bifocal lenses. This allows us to evaluate the dependence of the focii intensity on the polymerisation rate, the diffusivity parameter, low-pass filtering effect and the use of the index matching system for these lenses. This enables us to know the recording parameters in order to produce this type of multifocal diffractive lenses with higher quality and precision.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efecto de la codificación en el número de errores introducidos en un HDSS, Codification effect in the error number introduced in a HDSS

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Puerto, Daniel
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo se presentan resultados preliminares sobre el efecto de la codificación de los datos digitales introducidos en un sistema de almacenamiento holográfico de información. Para ello se introducen una serie de fuentes de ruido que afectan a las imágenes que usamos como entrada de datos. Estas fuentes de ruido son las que se observan principalmente en el montaje real, por lo que se trata de imitar la degradación del sistema para poder tener un modelo que nos ayude a identificar los parámetros más disruptivos en el tratamiento óptico de la señal y cómo influye la introducción de una codificación en dicha imagen.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photothermal Processing of Commercial Polymers under High Frequencies Femtosecond Laser Irradiation

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Ramirez, Manuel G.
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymer (Polyvinyl chloride-PVC, Polyethylene terephthalate-PET, and Polypropylene-PP) under irradiation with high frequency (until 1 MHz) femtosecond (450 fs) multi-pulse (N = 30−100) laser at λ nm= 515 (2.9 J/cm2 ) and 1030 nm (2.9 J/cm2 ). Different series of straight lines are made on the surface of these polymers at irradiation conditions not studied before, observing different thermal and ablative behaviours between them.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-frequency photothermal processing of commercial polymers under femtosecond laser irradiation for waveguide writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Martínez Guardiola, Francisco Javier
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The processing of three commonly used commercial polymer films (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under femtosecond (450 fs) irradiations at high frequency (1 kHz-1 MHz) multi-pulse (N=10-18000) laser at λ=515 (1.34 J/cm2, radius 9 μm) is analysed in order to have knowledge of which material and laser conditions are more suitable to write waveguides. Thermal and ablative effects are observed after laser irradiations. Heat accumulation effects of successive pulses impinging are simulated through a photothermal model in order to explain the results of irradiating these materials. Thermal analyses (Modulated Differential Scanning Calorimetry (MDSC) and Thermogravimetry (TG)) are performed and used to explain the different behaviour of each polymer. Three different regimes (non-thermal, thermal and saturation) are identified and explained from the model and experimental results. A connection between ablation depth and simulated reached temperature is established. A study of which number of pulses/spot area and frequency are appropriate for a better shape and ablation depth for writing waveguides on these polymers is performed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of the speed of sound waves using a modular 3D printed Helmholtz resonator

  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Marini, Stephan
  • Bleda, Sergio
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Gallego, Sergi
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
This work shows the redesign of an elemental experience based on the Helmholtz resonator using 3D printing. A Helmholtz resonator is based on a volume and at least one opening that can include a tube or not. The air column inside the tube can be considered the mass of the system, whereas the volume represents the system's stiffness. Due to these analogies between acoustics and mechanics, the Helmholtz resonator is an interesting example of a harmonic oscillator. The relevance of harmonic motions is well known, and this topic is present in the syllabus of many technical and scientific education degrees. In this work, a bottle has been designed and fabricated using 3D printer technology. The design aimed to create a Helmholtz resonator with a variable frequency of resonance. Different mouthpieces have also been designed. The bottle is composed of a set of cylindrical sections that can be attached, enlarging the length of the container. For ensuring that the different parts set a tight enclosure, an O-ring seal has also been designed and fabricated. As more rings and O-seal junctions are attached, the volume of the resonator grows. By blowing the mouth of the Helmholtz resonator with different sections, different resonance frequencies can be measured. From these measurements, several parameters can be estimated indirectly, such as the speed of sound waves, the room temperature, and air density. 3D printing permits to analyse several scenarios without using uncomfortablestrategies to vary the bottle's volume, such as water, reducing the hazard in a laboratory with electronic instrumentation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polímeros derivados de fuentes renovables como soporte para fotopolimerización láser en capa sólida

  • Romo Ríos, Adrián Enrique
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
En este trabajo se estudia la utilización de polímeros derivados de fuentes naturales como por ejemplo los obtenidos a partir de celulosa. Se detallan sus principales características en relación con su uso como polímero soporte en fotopolimerización en capa sólida. Un láser de estado sólido permite realizar la reacción de polimerización de forma controlada y se utiliza un sistema óptico holográfico para el seguimiento de la reacción en tiempo real. Se evalúan los parámetros: longitud de onda, intensidad de luz y energía necesaria.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bending in the holograms stored in hydrogel matrices

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Lucío, María Isabel
  • Zezza, Paola
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The study of the optical properties and behaviour of holograms stored in hydrogel matrices when the material is immersed in liquid medium represent a very important challenge currently. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes. These hydrogels can be chemically modified to obtain materials with different properties such as to be sensitive to a range of relevant analytes. Emergent applications require that the holograms stored in hydrogels be time-stable in a liquid medium. One of the most important applications of this type of system are holographic sensors. Holographic sensors have advantages over other types of sensors such as the possibility of miniaturization due to the use of holographic techniques, the ability to produce three-dimensional images, real-time quantification, possibility of low-cost mass manufacturing and label-free analyte- responsive. Due to these advantages, these sensors have great potential to be used in different areas such as environmental detection, veterinary testing, pharmaceutical bioassays and medical diagnosis. Therefore, the optical behaviour of the holograms and the optimization of the hydrogel’s matrices must be well studied. When volume phase holograms are stored in hydrogels matrices in liquid medium, the holographic planes can undergo a bending process that give rise to asymmetries in the lateral lobes around the Bragg angle. This bending affect to the diffraction efficiency, wavelength of maximum diffraction efficiency and the angular sensibility. These parameters are used as signal transducers in holographic sensors in transmission mode. The general aim of this work has been study the bending that is produced in the holographic planes when unslanted transmission volume phase holographic grating with a frequency of 1200 lines/mm have been stored in hydrogel matrices based on acrylamide (AA) and N,N'-methylenebisacrylamide (MBA) using different solvents (dimethyl sulfoxide, water and buffer solution) during the manufacturing process. Considering previous works on bending, and grating attenuated hologram.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Voltage dependence of retardance, flicker, and director angle orientation in reflective liquid crystal devices by average Stokes polarimetry

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Morales-Vidal, Marta
  • Puerto, Daniel
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel-aligned liquid crystal on silicon devices (PA-LCoS) can be found nowadays in most of the advanced areas in optics and photonics. Many works have been dedicated to their characterization for optimum utilization in applications. However, usual techniques are based on diffractive or interferometric measurements. Recently, we proposed the use of Stokes polarimetry for a versatile yet easy to implement characterization. We show that the LCoS can modelled as a nonabsorbent reciprocal device which, combined with time-average Stokes polarimetry, enables to demonstrate robust measurements across the whole applied voltage range for the retardance and its flicker. One of the main novelties is that we also obtain the director orientation, which we show that changes across the voltage range, especially at larger applied voltages. This might affect in very sensitive applications. It might also provide a deeper insight into the internal dynamics in the LC layer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Review of recording materials in holographic lenses for solar energy applications

  • Alfaro, Eder
  • Vilardy, Juan M.
  • Bastidas, Marlon
  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Jiménez Ruiz, Carlos
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
This paper provides a broad overview of historical and current developments of holographic lenses (HLs) in concentrating solar power. The review focuses on the recording material typically employed for HLs in concentrating solar photovoltaic and/or concentrating solar thermal collectors. This review shows that the use of HLs for energy transformation, achieves high performance efficiency in the designed physical systems, furthermore, some important elements to consider for future designs are presented, especially those related to the etching material of the HLs. Finally, the article outlines future recommendations, emphasizing potential research opportunities and challenges for researchers entering the field of photovoltaic and/or concentrating solar thermal collectors based on HLs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-performance liquid chromatography and UV-visible measurements to optimize the storage of volume holograms in hydrogels

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Cárdenas, Daniel
  • Nieto-Rodríguez, Belén
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The storage of time-stable holographic gratings in photohydrogels when the material is immersed in liquid media represents a great challenge at present. A very important stage in the process of storing holograms in photohydrogels are the washing stages to eliminate the remains of the components that have not reacted in the photochemical reaction. The main goal of this work is focusing on the study of the optimization of the washing stages of the photohydrogels based on acrylamide and N,N’-methylenebis(acrylamide) once unslanted transmission holograms have been stored. For the purpose of determining the compositions of the wash solutions, High-Performance Liquid Chromatography and UV-visible measurements have been employed in our system. PBST and DMSO:H2O 6:4 (v/v) are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38.0 and 27.6% are reached when PBST and DMSO:H2O 6:4 are employed, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic photopolymers applied to biosensing and efficient energy

  • Pascual, Inmaculada
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Berramdane, Kheloud
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic photopolymers can be used for two breakthrough applications, biosensing, and efficient energy. Related to biosensing a real challenge is to store time-stable holographic gratings in hydrogel matrices immersed in aqueous media. The storage of unslanted transmission holograms in hydrogels is the main objective of this work. The optimization of the washing steps using PBST and DMSO:H2O as solvents has been studied. Obtaining an adaptable holographic element to concentrate the sunlight avoiding the need for expensive tracking systems is the another goal of this study. The efficient energy study consists in recording a multiplexed holographic lens with low frequency (545 lines/mm) in a low-toxicity photopolymer to focus the sunlight from sunrise to sunset. The efficiency has been evaluated by measuring the short circuit current (Isc) at different incident angles under solar illumination and we obtained wide acceptance angle systems. This study reaches the trade-off between a high incident acceptance angle and good efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding the degrees of freedom of wavefront modulation by liquid crystal on silicon microdisplay with a digital backplane

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Beléndez, Augusto
  • Márquez, Andrés
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Digital backplane liquid crystal on silicon devices (LCoS) are widely used in wavefront engineering applications due the maturity of the technology, thus the reliability of their performance. A thorough study of the relation between the different control parameters and their effect on the retardance modulation is lacking though. These control parameters, which are the low and high levels of the voltage signal together with the grey level addressed, in relation with the retardance modulation produced are explored across the whole visible spectrum. From a more practical point of view, this enables to decide which voltage parameters across the whole range of possibilities are the most appropriate for a certain wavefront engineering problem without the need to measure them in advance. Additionally, we are interested in the comparison of two different approaches developed in our research group to obtain the retardance modulation to see their possible pros and cons. The results presented are backed by the experimental measurements provided.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Creating holography: 75th anniversary of Gabor’s invention

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The year 2022 marks the 75th anniversary of Dennis Gabor’s invention of the holographic method and for which he received the Nobel Prize in Physics in 1971. The year 2022 also marks the sixtieth anniversary of the publication in 1962 of two seminal papers in the field of holography. In one of them Yuri Denisyuk introduces the reflection hologram and in the other paper Emmeth Leith and Juris Upatnieks describe the holographic process from a communication- theory viewpoint. In this paper, we carry out a brief description of the different “origins” of holography, making special mention to the way Gabor, Denisyuk y Leith established the basis, which made possible the spectacular development of holography from the invention of the laser at the beginning of the decade of 1960.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photopolymer characterization by high frequency pulsed laser

  • Puerto, Daniel
  • Gallego, Sergi
  • Sirvent-Verdú, Joan Josep
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Maximizing phase modulation in photopolymers remains a challenge in order to use these materials to fabricate photonics devices. Different material compositions and irradiation conditions have been studied in order to achieve it. One of the main conclusions has been that with continuous laser exposure better results are achieved. However, our results show that higher phase modulation can be achieved using pulsed laser. The study has been done with crosslinked acrylamide-based photopolymers (AA/PVA), Biophotopol and Holographic Polymer-Dispersed Liquid Crystals (HPDLC) exposed with a pulsed laser (532 nm). Thus, phase modulation increases of 8-15% have been achieved between pulsed laser and continuous laser exposure, with a maximum phase depth of 3π radians in AA/PVA, ~3π/2 in Biophotopol and ~π in H-PDLC. This opens the door to the use of this photopolymer in large-scale manufacturing, such as H-PDLC photopolymers to fabricate tunable lenses using the laser-induced direct transfer (LIFT) technique.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Monte-Carlo based analysis of polarimetric calibration of liquid crystal devices

  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Puerto, Daniel
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
An advanced polarimetric model for liquid crystal devices is presented and the sources of uncertainty to determine the values of its parameters are evaluated using a Monte-Carlo approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fabricación y caracterización de celdas de cristal líquido basadas en fotoalineado de colorantes azo

  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
En este trabajo de investigación se han fabricado y caracterizado celdas de cristal líquido con capas de fotoalineado basadas en los colorantes azo comerciales Brillian Yellow (BY) y Methyl Red (MR) con el cristal líquido comercial E7 con el objetivo de obtener una lámina retardadora, paso previo necesario para nuestras futuras investigaciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High index modulation in reflection holograms using nanoparticle

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Solla-Gullón, José
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Unslanted reflection gratings has been stored in an acrylate-poly(vinyl alcohol) based photopolymer. The diffraction efficiency has been increased doping the photopolymer with platinum (Pt) nanoparticles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Time-stable holograms stored in hydrogel matrix

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Lucío, María Isabel
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Storing holograms in hydrogel matrices and its temporal stability is real challenge when the material is immersed in aqueous medium. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes. Since they can be synthesized to be sensitive to a range of relevant analytes, one of the most important applications of this type of system are holographic sensors. These sensors have great potential to be used in different areas such as environmental detection, veterinary testing, pharmaceutical bioassays, and medical diagnosis. Therefore, a key factor in the manufacture of holographic sensors is to develop and optimize hydrogel matrices in which stable holograms can be stored over time and in aqueous media where analytes are present.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Platinum and palladium nanoparticles doped photopolymer for reflection holography

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás
  • Solla-Gullón, José
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Volume holographic reflection grating storage in eco-friendly photopolymers is a current challenge. Besides, they have the potential for usage in important applications such as sensors and holographic optical elements. The main objective of this work was the modification of the composition of Biophotopol, a low toxicity photopolymer based on poly(vinyl alcohol), in order to increase the diffraction efficiency of the reflection gratings. For it, high refractive index Platinum and Palladium nanoparticles were then added to the holographic material to improve refractive index modulation during the recording phase. The concentration of nanoparticles employed was taken into consideration. Using a concentration of 0.58 nanomoles of Platinum nanoparticles per gram of poly(vinyl alcohol), maximum diffraction efficiency above 50% was achieved. These were, to the best of our knowledge, the best results so far obtained for high-frequency holographic reflection gratings in a low-toxicity material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Developing holographic couplers for see-through application without prisms

  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Mena Ortiz, Emilio José
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work we present an overview of our advances in the fabrication of holographic couplers for seethrough based on photopolymers, analyzing different aspects such as different geometries in transmission and reflection, different photopolymer compositions, shrinkage effects and noise gratings.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Waveguide couplers based on HPDLC for see-through applications: initiator optimization

  • Gallego, Sergi
  • Puerto, Daniel
  • Neipp, Cristian
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Polymer nanocomposites are designed and engineered on a nanometer scale with versatile applications including optics and photonics. During the last two decades, different photopolymerizable nano-compounds were introduced and developed to modify polymer properties. In this sense, inorganic and organic nanoparticles have been introduced to increase the refractive index modulation and/or to reduce the shrinkage. Liquid crystal polymer composites have been added to the category of active photopolymer materials with an electrically switchable option. Nowadays, in the design of smart glasses some problems remain on the table, like power consumption, the limitation of the resolution, the wide field of view, etc. The inclusion of holographic optical element has provided some possible solutions. In particular the photopolymers have been reported a good system to bring the photons produced in the image creation to the eye. Our group proposed an alternative scheme using transmission holographic elements. The fabrication architecture was tested with different photopolymers in order to optimize their chemical composition, and we proposed three schemes adapted to each material properties. In this paper we study the influence of the initiator concentration, for Holographic polymer dispersed liquid crystal photopolymer, on the refractive index modulation and on the tunable properties of these holographic optical elements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D FDTD analysis of cross-talk in pixelated PA-LCos devices: impact of fill factor and size pixel on S2 and S3 parameters

  • Francés, Jorge
  • Sánchez-Montes, Adriana R.
  • Márquez, Andrés
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the last decades, new technology fabrication developments have permitted increased resolution and reduced pixel size of Liquid crystal on silicon (LCoS) microdisplays. However, the pixel size reduction triggers the microdisplay performance degradation due to different phenomena, such as the cross-talk between neighbouring pixels, fringing fields, out-of-plane reorientation of the liquid crystal director, and diffraction effects due to the pixelated grid pattern of the microdisplay. In this work, a full 3D simulation model has been applied to predict the liquid crystal director orientation as a function of space and external voltage. The scheme here considered provides the complete vectorial information of the electromagnetic field distribution produced by one single pixel illuminated by plane waves circularly polarised. This analysis is carried on for several pixel and gap sizes for different external voltages. This research focuses on S2 and S3 Stokes parameters and how their behaviour is affected due to the cross-talk phenomena previously presented.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: 50th anniversary of Dennis Gabor’s Nobel Prize: Part I. A historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
A historical review of the origins of holography is presented. Special emphasis is placed on the contributions of Gabor, Denisyuk and Leith to the development of holography, to motivate and inspire students and young researchers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage study and optimization of multiplexed green holographic solar concentrators toward improved photovoltaic energy

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, the development of optical systems applied to the generation of clean and renewable energy is one of the great challenges of the 21st century. This work presents a theoretical and experimental study of shrinkage in multiplexed holographic lenses (MHL) stored in a low-toxicity photopolymer named Biophotopol. For this purpose, a study has been carried out using k-space tools. In addition, a study has been performed to optimize the number of MHLs, the hologram thickness, and the angular distance between peaks. To evaluate the efficiency, the short-circuit current has been evaluated under solar illumination with different incident reconstruction angles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Celebrating holography anniversaries: a historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The year 2022 marks the 75th anniversary of Dennis Gabor?s invention of the holographic method, what he called microscopy by reconstructed wave-fronts, as well as the 60th anniversary of the publication in 1962 of two seminal papers in the field of holography: the introduction of the reflection hologram by Yuri Denisyuk, and the description of the holographic process from the point of view of communication theory by Emmett Leith and Juris Upatnieks. Within the framework of these celebrations, a historical review of the origins of holography is presented with special emphasis on the contributions of Gabor, Denisyuk and Leith to the development of holography.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards sustainable solar energy: optimization of a holographic concentrator in a green photopolymer

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Alfaro, Eder
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Nowadays, one of the challenges in obtaining competitive photovoltaics is to achieve lightweight, low-cost, and free-tracking systems. It is also desired to eliminate wavelengths that can damage the photovoltaic cell by overheating. To this end, volume holographic lenses (HLs) allow controlling the solar radiation that hits the photocell, avoiding harmful radiation that can damage photocells, such as infrared radiation, which heats the solar cells, but does not efficiently convert solar energy into electrical energy. In addition, holographic solar concentrators based on multiplexed HLs have the advantage that they do not require any solar tracker. In this work, we present the optimization of the relevant conditions in the fabrication of multiplexed HLs stored in Biophotopol. These parameters refer to both the material factors (optimal concentrations of dye and monomer, thickness) and the optical recording factors (optimal number of multiplexed HLs, angular distance peak-to-peak, and exposure times). Finally, a theoretical study of the exposure times has been done using the exposure schedule method (ESM) to improve the average diffraction efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Building-Integrated Concentrating Photovoltaics based on a low-toxicity photopolymer

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Low-toxicity solar concentrator systems represent an important challenge for outstanding photovoltaic (PV) applications. Particularly, multiplexed holographic lenses (MHL) as Holographic Solar Concentrators (HSC) provide insight into promising possibilities for Building-Integrated Concentrating PVs. This technology does not affect crucial ecosystems, and can convert buildings from energy consumers into energy suppliers. They can be used in windows, roofs, or walls, and a high diffraction efficiency and wide acceptance angle are desired. In this work, we presented several designs of MHL of low spatial frequency 525 lines mm−1, based on a low-toxicity photopolymer and supported on a window glass. The average diffraction efficiency of these HSC was evaluated at 633 nm, whereas the acceptance angle was evaluated by measuring the short-circuit current under solar illumination at different incident angles. Versatile and high-efficiency holographic elements have been used to concentrate sunlight from different relative positions during the day, avoiding the need for expensive tracking systems. To the best of our knowledge, this is the best trade-off between high diffraction efficiency (85%) and wide acceptance angle (104∘) in a low-toxicity holographic solar concentrator.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Volume Gratings for the recording of a waveguide on photopolymers

  • Neipp, Cristian
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Puerto, Daniel
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work we present an application of volume transmission gratings for the coupling of light inside and outside a holographic waveguide. The volume gratings were recorded on photopolymer, since they have demonstrated great advantages over other materials. The gratings were fabricated with a spatial frequency of 1700 lines/mm so as to couple light inside the glass substrate under total reflection condition. The results demonstrate the efficiency of this device to be used in augmented reality applications, for example as see-through glasses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Chromatic selectivity study in Bayfol HX200 multiplexed-reflection holograms in multilayer systems

  • García-Vázquez, José Carlos
  • Mas-Abellán, Pedro
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
In this work, reflection gratings has been stored in Bayfol X200 from Covestro. Up to two high-efficiency reflection holograms have been multiplexed in the same layer due to the physical thickness of the material films, 16μm. The less material thickness, the fewer number of high diffraction efficiency multiplexed holograms we can store in it. Once multiplexed the pairs of holograms at different recording angles we have stuck several layers together, forming a multilayer system. From this multilayer system, we have obtained a wide diffracted spectrum were the result is the superposition of all the multiplexed gratings recorded in each layer. Therefore, this system has a good chromatic selectivity and allows us to select the reflected wavelengths and the spectral wide for each application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimización del procesado por láser de femtosegundo de polímeros comerciales mediante el control fino de los procesos térmicos y de absorción

  • Ortuño, Manuel
  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Este estudio se estudia la respuesta de tres polímeros comerciales (PVC, PET y PP) bajo irradiaciones multipulsos con un láser de femtosegundo (450 fs) de alta frecuencia (1 kHz-1 MHz) a λ=343 nm, 515 nm (1,40 J/cm2 para ambas longitudes de onda) y 1030 nm (1,70 J/cm2), permitiendo realizar un amplio estudio del procesado láser bajo parámetros como la absorción a diferentes longitudes de onda y la acumulación térmica en irradiaciones multipulso a diferentes frecuencias de repetición.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving the efficiency of photopolymerized PVA/AA gratings by high frequency femtosecond-laser direct writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Mena Ortiz, Emilio José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser irradiation at λ=343 nm (1.40 J/cm2), 515 nm (1.40 J/cm2) and 1030 nm (1.70 J/cm2), resulting in a complete study of laser processing under parameters as the dominant absorption mechanisms at different wavelengths, as well as the thermal accumulation processes in irradiations at different repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable focal photopolymer lenses printed for the first time by laser-induced-forward transfer without a sacrificial layer

  • Puerto, Daniel
  • Gallego, Sergi
  • Constantinescu, Cătălin-Daniel
  • Florian, Camilo
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alloncle, Anne Patricia
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The fabrication of polymeric lens arrays on flexible surfaces for its use in wide-field visual systems is a challenge that is being addressed by using the Laser Induced Forward Transfer (LIFT) technique. The objective is to achieve polymer laser printing by improving both the overall printing quality and the manufacturing time of these lens matrices compared to other techniques. Another challenge when using tunable polymers is the customization of tunable focal lenses dynamically controlling their optical properties. In this work we address both aspects by using a tunable photopolymer thanks to liquid crystal molecules, such as H-PDLC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unitary matrix approach for a precise voltage dependent characterization of reflective liquid crystal devices by average Stokes polarimetry

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Precise characterization of parallel-aligned liquid crystal on silicon microdisplays has an important impact in many advanced photonics applications. We show liquid crystal on silicon (LCoS) modeled as a non-absorbent reciprocal device. Combined with time-average Stokes polarimetry, LCoS enables us to demonstrate robust measurements across the whole applied voltage range for the retardance and its flicker, and also as a novelty for the director orientation. We obtain that the director orientation changes across the voltage range, especially at larger applied voltages. This is a small effect, but it may provide a deeper insight into the internal dynamics in the liquid crystal layer, and in sensitive phase-only applications will produce a coupling between amplitude and phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Quality and measurement aberrations on holographic lenses

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Abstract: In this paper, we have evaluated the quality of holographic lenses stored in an environmentally friendly photopolymer. Optical quality metrics has been used to test the holographic lenses. The metrics values obtained shows that the negative asymmetrical holographic lenses have the best optical quality.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Liquid crystal doped photopolymer micro-droplets printed by a simple and clean laser-induced forward transfer process

  • Puerto, Daniel
  • Gallego, Sergi
  • Constantinescu, Cătălin-Daniel
  • Florian, Camilo
  • Ortuño, Manuel
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alloncle, Anne Patricia
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We print a tunable photopolymer (photopolymer dispersed liquid crystal -PDLC), using the laser-induced direct transfer technique without absorber layer, which was a challenge for this technique given the low absorption and high viscosity of PDLC, and which had not been achieved so far to our knowledge. This makes the LIFT printing process faster and cleaner and achieves a high-quality printed droplet (aspheric profile and low roughness). A femtosecond laser was needed to reach sufficiently peak energies to induce nonlinear absorption and eject the polymer onto a substrate. Only a narrow energy window allows the material to be ejected without spattering.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estrategias para el diseño de elementos ópticos holográficos de características específicas mediante fotopolimerización láser

  • Romo Ríos, Adrián Enrique
  • Lloret, Tomás
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
El espesor de la capa y la rigidez o flexibilidad del polímero formado tras la polimerización son dos factores importantes a tener en cuenta dependiendo del elemento óptico holográfico (EOH) a desarrollar. Para aplicaciones de EOH tipo lente es habitual que el polímero tenga un espesor de capa inferior a 50 micrómetros y una flexibilidad de capa muy limitada. El espesor de la capa influye en el rendimiento en difracción del EOH y por tanto en el rendimiento que consiga el propio elemento al realizar su función durante su uso. Por otra parte la flexibilidad de la capa es un parámetro de gran importancia en el caso de que el EOH vaya unido a soportes con curvatura. Una baja flexibilidad impide la adaptación del EOH al soporte, dificultando o impidiendo su uso en la práctica. En este trabajo se estudian las alternativas en cuanto a monómeros y entrecruzantes que permitan un espesor de capa mayor y una flexibilidad adecuada para adaptarse a soportes curvados.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimization of Multiplexed Wide-angle Solar Concentrators with High Diffraction Efficiency

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The main objective of the work was to obtain a versatile holographic element to concentrate sunlight from different relative positions of the Sun during the day, avoiding the need for expensive tracking systems. For this purpose, symmetric and asymmetric holographic lenses of negative focal length were stored using peristrophic holographic multiplexing techniques to obtain holographic optical elements of width angular response and high diffraction efficiency. For this purpose, a low-toxicity photopolymer called Biophotopol whose dye was photosensitive at the recording wavelength of 473 nm was used. The holographic behavior of the solar concentrators (HSC) was studied by measuring the angular diffraction efficiency at 633 nm (near the maximum response of silicon cells). The efficiency of the complete HSC-solar cell system has been studied in short-circuit under solar illumination, using a solar simulator, at different incidence angles. In addition, the relationship between the angular separation between multiplexed HLs and the efficiency of the complete system has also been studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Absolute polarimetric calibration of the retardance of a liquid crystal on silicon microdisplay

  • Sánchez-Montes, Adriana R.
  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The phase-shift exhibited by liquid crystal on silicon devices (LCoS) depends on the voltage applied and the illumination wavelength. Most of the LCoS used in the labs are digitally addressed using a binary pulse width modulated signal. Usually, these devices are characterized for a very small range of the available binary voltage values and for specific wavelengths. In this work, we consider a commercial parallel-aligned liquid crystal on silicon device (PA-LCoS) in which the binary voltages are accessible through the software of the vendor. We perform a complete averaged Stokes polarimetric characterization of the device where we are able to obtain the absolute unwrapped retardance values for a wide range of voltage parameters and across the visible spectrum. This provides a practical approach to evaluate the whole range of phase modulation possibilities, and to analyze some issues related with the physics of the device.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of a vertically aligned liquid-crystal on silicon microdisplay for photonics applications

  • Nájar, Guillem
  • Bernabeu, Andrés P.
  • Sánchez-Montes, Adriana R.
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Puerto, Daniel
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
We present the characterization results for an analogically addressed vertically aligned liquid crystal on silicon microdisplay (VA-LCoS). We show that it covers more than 360o phase modulation range at 1550 nm, and that in the visible the range available enables the generation of multiorder DOEs. There are basically no studies dealing with the characterization of vertically aligned high resolution LCoS devices, since the ones typically found in the literature and commercially available correspond to the parallel aligned. We have also verified that the microdisplay used in this work is free from flicker, which is a very interesting feature for application where the phase stability is of the utmost importance. The results shown here represent a first step in the work underway oriented to the generation of programmable DOEs for telecommunication applications (C-band) and for the visible spectrum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photopolymer Holographic Lenses for Solar Energy Applications: A Review

  • Alfaro, Eder
  • Lloret, Tomás
  • Vilardy, Juan M.
  • Bastidas, Marlon
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Holographic lenses (HLs) are part of holographic optical elements (HOE), and are being applied to concentrate solar energy on a focal point or focal line. In this way, the concentrated energy can be converted into electrical or thermal energy by means of a photovoltaic cell or a thermal absorber tube. HLs are able to passively track the apparent motion of the sun with a high acceptance angle, allowing tracking motors to be replaced, thus reducing the cost of support structures. This article focuses on a review of the materials used in the recording of a holographic lens (HL) or multiple HLs in photovoltaic and/or concentrating solar collectors. This review shows that the use of photopolymers for the recording of HLs enables high-performance efficiency in physical systems designed for energy transformation, and presents some important elements to be taken into account for future designs, especially those related to the characteristics of the HL recording materials. Finally, the article outlines future recommendations, emphasizing potential research opportunities and challenges for researchers entering the field of HL-based concentrating solar photovoltaic and/or concentrating solar thermal collectors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Challenges and impact of the grating vector direction in high-frequency LC-SLM binary phase gratings

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Sirvent-Verdú, Joan Josep
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Márquez, Andrés
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Spatial Light Modulators (SLMs) typically use PA-LCoS microdisplays, known for high resolution and small pixel size, for phase-only modulation. However, different phenomena related to the cross-talk, fringing fields between pixels, and out-of-plane reorientation of the liquid crystal director degrade the performance of pixelated SLM devices. The technology faces the challenge of overcoming these phenomena as novel applications require higher pixel size resolutions and smaller pixel sizes. This work applies a numerical workflow that permits the analysis of the different parameters that set up a PA-LCoS microdisplay, e.g., fill factor, pixel size, external voltage and the influence of the LC director and the interaction of light through the structure. Specifically, we focus our analysis on the impact of high-frequency binary phase gratings on the radiometric and polarimetric response with orthogonal grating vectors. The heterogenous LC distribution as a function of the grey level along the 3D structure and the inhomogeneous distribution of the Stokes parameters are analysed, setting up a framework to analyse the nonlinear behaviour of the system and its impact on diffraction and polarimetric performance in future microdisplays with higher resolutions and smaller pixel sizes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimizing femtosecond laser processing of commercial polymers by fine control of the thermal and absorption process

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Mena Ortiz, Emilio José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser irradiation at λ=343 nm (1.40 J/cm2), 515 nm (1.40 J/cm2) and 1030 nm (1.70 J/cm2), resulting in a complete study of laser processing under parameters as the dominant absorption mechanisms at different wavelengths, as well as the thermal accumulation processes in irradiations at different repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic solar concentrators stored in an eco-friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Lloret, Tomás
  • Gallego, Sergi
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work it is shown the first characterization of holographic solar concentrators recorded in Biophotopol - one of the greenest photopolymers. Biophotopol is an acrylate-based and water-soluble photopolymer with good recycling properties. The composition of this photopolymer and their thickness are easily changeable, which implies an important advantage vs. others commercialized photopolymers. Good diffraction efficiency and wide acceptance angles are achieved on phase volume transmission holograms by using an optimized composition and thin layers. A curing stage with a white incoherent light has been performed to obtain high temporal stability together with a good diffraction efficiency. Finally, the performance of the holographic lenses as holographic solar concentrators has been evaluated with an electronic setup connected to a polycrystalline silicon photovoltaic cell and a high intensity solar simulator emitting a standard solar spectrum (AM1.5G).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multiplexing-based holographic concentrators for solar applications

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Nowadays, a significant challenge in advancing photovoltaic technology lies in developing lightweight, cost-effective, and non-tracking systems. Moreover, there is a pressing need to mitigate the impact of harmful wavelengths on photovoltaic cells, particularly those contributing to overheating. Addressing these concerns, volume holographic lenses (HLs) offer a promising solution by selectively controlling solar radiation exposure to photocells, effectively mitigating damage from infrared radiation that tends to heat solar cells without converting solar energy efficiently into electrical energy. Furthermore, holographic solar concentrators leveraging multiplexed HLs offer the additional advantage of eliminating the requirement for solar tracking systems. In this study, we focus on optimizing key fabrication parameters of multiplexed HLs stored in Biophotopol. These parameters encompass material considerations such as optimal dye and monomer concentrations, as well as thickness, alongside optical recording factors including the ideal number of multiplexed HLs, angular separation between peaks, and exposure times. Additionally, we conduct a theoretical investigation into exposure times utilizing the exposure schedule method (ESM) to enhance average diffraction efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Accurate, Efficient and Rigorous Numerical Analysis of 3D H-PDLC Gratings

  • Francés, Jorge
  • Bleda, Sergio
  • Puerto, Daniel
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work presents recent results derived from the rigorous modelling of holographic polymer-dispersed liquid crystal (H-PDLC) gratings. More precisely, the diffractive properties of transmission gratings are the focus of this research. This work extends previous analysis performed by the authors but includes new features and approaches. More precisely, full 3D numerical modelling was carried out in all analyses. Each H-PDLC sample was generated randomly by a set of ellipsoid geometry-based LC droplets. The liquid crystal (LC) director inside each droplet was computed by the minimisation of the Frank elastic free energy as a function of the applied electric field. The analysis carried out considered the effects of Frank elastic constants K11, K22 and K33; the anchoring strength W0; and even the saddle-splay constant K24. The external electric field induced an orientation of the LC director, modifying the optical anisotropy of the optical media. This effect was analysed using the 3D split-field finite-difference time-domain (SF-FDTD) method. In order to reduce the computational costs due to a full 3D tensorial analysis, a highly optimised method for high-performance computing solutions (HPC) was developed. The influences of the anchoring and voltage on the diffraction efficiencies were investigated, showing the potential of this approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic sensors for water detection in organic solvent mixtures

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
In recent years, there has been a growing interest in reflection holography, a technique with versatile applications ranging from energy efficiency to sensing various parameters like temperature, humidity, or pressure. This study delves into the evaluation of sensing capabilities for water mixed with other organic solvents utilizing reflection holography. Specifically, we employed Biophotopol, a water-based photopolymeric material well-known for its high sensitivity to environmental humidity changes, wherein reflection diffraction gratings were incorporated. Our objective revolved around detecting wavelength shifts and alterations in the diffraction efficiency (DE) of these reflection gratings upon immersion in the these mixtures. To achieve this, we employed different concentrations of water mixed with acetone (C3H6O) and tetrahydrofuran (C4H8O). These organic solvents were selected due to their low relative polarity (low dielectric constant), thereby mitigating the risk of dissolving Biophotopol components.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estrategías de desenrollado de fase para metrologías de retardadores variables, Phase-unwrapping strategies for metrology of variable retarders

  • Sánchez-Montes, Adriana R.
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo presentamos diferentes características que debemos tener en cuenta cuando queremos evaluar el retardo de una lámina retardadora variable, o de cualquier dispositivo que se pueda comportar como una de estas láminas. En nuestra experiencia, y debido a que están involucradas diferentes funciones trigonométricas, hemos encontrado que siempre aparece cierta incertidumbre en el retardo medido que está limitado por los valores obtenidos de dichas funciones. Intentaremos contextualizar los resultados con los diferentes modos de desenrollado que podemos utilizar y ver en qué punto se produce dicho enrollado, así como las consideraciones que deberemos tener en cuenta para evaluar el retardo para que se ajuste a lo que realmente estamos midiendo.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis on the presence of out-of-plane LC components on PA-LCoS devices due to crosstalk and fringing fields

  • Sánchez-Montes, Adriana R.
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Francés, Jorge
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
It is well known that Spatial Light Modulators (SLM) are of great interest and used in many different areas because of their continuous capability of light modulation and their potential as a linear variable retarder. However, high-definition SLM devices face the challenge of providing high performance under the influence of different phenomena, such as crosstalk between adjacent pixels, fringing fields, and diffraction effects arising from the finite pixel grid pattern. In this work, a numerical analysis that computes the director orientation as a function of the retardance across specific voltages (gray level) is compared to experimental results. More specifically, this work is focused on analysing how previously mentioned phenomena affect the interpretation of the residual twist angle in parallel-aligned (PA) on SLM. This twist angle is computed from the Stokes parameter and compared to the actual orientation of the director distribution.