Pasar al contenido principal

FOTONICA HOLOGRAFICA PARA EL BIENESTAR: ENERGIA SOSTENIBLE DE NUEVA GENERACION Y BIOSENSADO

PID2023-148881OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Customized PVA/AA diffraction gratings by high repetition rate femtosecond direct laser writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
In this work, we investigate the behavior of poly(vinyl alcohol)/acrylamide photopolymers (PVA/AA) under high repetition rate (1 kHz – 1 MHz), multipulse (1 – 20), femtosecond (450 fs) laser irradiation at λ=515 nm, varying fluence values from 0.005 to 1.24 J/cm2. Our results reveal that a wide range of nano/microstructures with varying heights and shapes can be induced, as a consequence of monomer diffusion and swelling effects. Furthermore, we demonstrate that by adjusting the irradiation parameters, it is possible to achieve precise control over the fabricated structures, enabling potential applications not only in optics, but also in tribology and cell adhesion and growth. As an application of these results, we successfully fabricated high-period diffraction gratings at high repetition rates with diffraction efficiencies close to the theoretical maximum. These findings provide new insights into the ultrafast lasermatter interaction in photopolymers and open new scenarios for the fabrication of functional polymeric surfaces.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Quantitative water determination in THF/H2O mixtures using a sustainable holographic sensor with operational reusability

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The development of efficient water sensors for organic media is critical for industrial solvent recycling and storage. In this work, reflection holograms recorded in a low-toxicity and water-based photopolymer are proposed as eco-friendly optical sensors for detecting water in tetrahydrofuran (THF). The proposed sensor shows a dynamic range from 0.03% (Limit of Detection) up to 7.00% v/v of water in THF. Furthermore, the device is reusable for concentrations ≤ 5.00% v/v, where the polymer matrix operates within an elastic regime that allows for consistent recovery. The optical response was monitored via Bragg wavelength shifts and diffraction efficiency variations, complemented by absorption and weight tracking analysis. Results reveal a dual sensing mechanism: swelling-induced redshifts in water-rich mixtures and shrinkage-induced blueshifts in nearly pure THF. Kogelnik’s Coupled Wave Analysis confirmed the reproducibility of the structural changes. This study demonstrates that biodegradable holographic sensors can provide a quantitative, sustainable, and reliable solution for monitoring solvent quality in industrial environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Novel PCA-Based Lower-Dimensional Remapping of the Solution Space for a Genetic Algorithm Optimization: Estimating the Director Distribution in LC-Based SLM Devices

  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Neipp, Cristian
  • Beléndez, Augusto
  • Francés, Jorge
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work introduces a novel computational approach based on Principal Component Analysis (PCA) for dimensionality reduction of the solution space in optimisation problems with known linear interdependencies among solution variables. By creating synthetic datasets with deliberately engineered properties and applying PCA, the solution space’s remapping significantly reduces its dimensionality, leading to faster computation and more robust convergence in optimisation processes. We demonstrate this method by integrating it with a Genetic Algorithm (GA) for solving the optimal director distribution in liquid crystal (LC) devices, specifically addressing 2D and complex 3D spatial light modulator (SLM) structures such as twisted nematic liquid crystals (TN-LC) and parallel-aligned liquid crystal on silicon (PA-LCoS), respectively. The phase profiles obtained from the director vector distributions for horizontal and vertical high-frequency binary phase gratings closely match the theoretical values derived from minimising the traditional elastic Frank–Oseen functional via Euler–Lagrange equations. Beyond this specific application, our method offers a general framework for reducing computational complexity in optimisation problems by directly reducing the dimensionality of the solution space. This approach is applicable across various optimisation scenarios with well-known linear interdependencies among solution variables, enabling significant reductions in computational costs and improvements in robustness and convergence.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Full control of arbitrary linearly polarized structured light wavefronts using PA-LCoS devices

  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel-Aligned Liquid Crystal on Silicon (PA-LCoS) Spatial Light Modulators (SLMs) are highly adaptable devices capable of dynamically generating different beams through precise phase and polarization modulation. Within the various types of beams that can be produced with these devices, linearly polarized structured polarization beams offer unique properties that are advantageous for applications in fields such as microscopy, photoalignment, optical trapping, and communications. Generating purely linearly polarized structured beams is very challenging and requires a good characterization of the PA-LCoS. In this study, we apply Stokes polarimetric techniques twice: first to characterize the 2D retardance, and second to verify the fidelity of the generated structured light. We validate our approach by evaluating and compensating for spatial inhomogeneities for uniform wavefronts. Then, a wide variety of linearly polarized structured light beams are generated and metrologically evaluated to learn the uncertainty expected as a function of the complexity of the design. This approach not only enhances the stability and uniformity of the output beams but also broadens the potential for PA-LCoS SLMs in advanced optical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ablation cooling and thermal regimes in high repetition rate ultrafast laser processing of commercial polymers

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Ultrafast laser processing of polymers is strongly influenced by the repetition rate of the irradiation, which determines the balance between heat accumulation and material removal mechanisms. In this work, we investigate the response of a commercial polymer, poly(ethylene terephthalate) (PET), under femtosecond laser irradiation at two different repetition rates: 1 kHz and 60 kHz. Experiments were performed at a wavelength of 1030 nm with 220 fs pulses and a pulse energy of 88 μJ using a beam radius of approximately 118 μm. The results reveal clear differences in the morphology of the induced structures between the two irradiation regimes. At 1 kHz, extended thermal halos surrounding the ablation crater are observed, associated with local temperature rise above the glass transition threshold. When the repetition rate is increased to 60 kHz, the ablation volumes become significantly larger while the surrounding thermal halos are reduced. These results indicate that higher repetition rates promote more effective material removal while limiting the extent of the thermally affected regions. This behavior suggests that efficient ablation can act as a heat dissipation mechanism, consistent with the hypothesis of ablation cooling in ultrafast laser processing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Stability analysis of symmetric holographic transmission gratings stored in photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The development of advanced holographic materials is a constantly evolving field of research, driven by the need to adapt their optical properties to the specific demands of photonic devices. In particular, photohydrogels emerge as promising materials for applications in liquid media because of their ability to maintain structural integrity under high-humidity conditions. This work focuses on evaluating the structural stability of unslanted transmission volume phase holograms stored in photohydrogels based of acrylamide and N,N′-methylenebis(acrylamide). The influence of radiant exposure on diffraction efficiency has been analyzed on holographic gratings stored at two different spatial frequencies. For this purpose, a theoretical model based on the theories of Kogelnik, Kubota and Uchida has been used, considering the influence of bending and attenuation of holographic gratings in depth. This approach allows us to understand how these deformations affect the diffraction efficiency and the internal structure. This can provide key information for the design of devices in which holograms stored in photohydrogels are used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Development of a tailored cellulose-derived binder for sustainable hydrogel photopolymers

  • Romo Ríos, Adrián Enrique
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
We have evaluated two water soluble cellulose derivatives Hydroxyethylcellulose (HEC) and Methylcellulose (MC) as binders for hydrogel photopolymer formulations with the purpose of using it for holographic applications. We prepared different aqueous solutions with increasing polymer concentrations and cast them into films, after controlled drying (temperature and relative humidity), we analyzed the samples in order to evaluate their final characteristics and optical compatibility. The results have shown that the binder concentration and drying process affect the final binder appearance and residual contents, which determine the surface smoothness and the film’s opacity, these factors are critical for holographic applications because they change the refractive index contrast and scattering losses in the sample. HEC appears more promising compared to MC as a binder for hydrogel photopolymers because the formulation, processing and final appearance show minimal optical heterogeneity and ensured compatibility with the optics involved in the photopolymerization reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Low-toxicity photopolymer biophotopol optimization to record wavelength-shifted holographic couplers

  • Sirvent-Verdú, Joan Josep
  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Fernández, J.
  • Mora, Manuel
  • García-Vázquez, José Carlos
  • Márquez, Andrés
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work, we present our results regarding holographic transmission gratings recorded in Biophotopol. An adaptation of the material base composition was needed to produce such holographic couplers without using prisms by recording with wavelength-shifted geometries. Changing the dye’s quantity in the prepolymer solution led to observe the coupling of the recording light, while the crosslinker’s and nanoparticle inclusion produced gratings with higher diffraction efficiency for the intended operating wavelength. By measuring the Bragg angle as a function of the playback wavelength, we can inspect the post-processing deviations for different variations of the base composition. Thus, with this research, we aim to provide experimental evidence and a characterization of these effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fundamental tools in the design of hololens-based optical devices

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Today, holography-based photonic devices are becoming increasingly important in many fields of application. Holographic lenses (HL) work by diffraction and can replace the behavior of conventional refractive lenses, which are much more expensive. These lenses have spectral and angular dependence, which makes them particularly interesting. Probably the best known traditional application is their use as holographic solar concentrators in photovoltaics. In this work holographic lenses have been recorded into a novel photopolymer with low toxicity properties called Biophotopol. Photopolymer concentrations have been optimized. Fundamental parameters such as shrinkage and swelling have been modeled. For this purpose, the bending phenomenon has been studied by fitting theoretical models. Furthermore, their application as holographic solar concentrators has been evaluated and the theoretical and experimental concentration ratio (CR) has been calculated. Finally, the holographic concentrators have also been analyzed under white light conditions using a solar simulator and acceptance angles have been obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Platinum nanoparticles effects in hologram's formation processes in a low-toxicity photopolymer material

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bravo Francés, Juan Carlos
  • Fernandez, Roberto
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we present a study related to photopolymerization dynamics in a nanocomposite material. Our experimental results reveal a significant impact on the real-time hologram formation dynamics when platinum (Pt) nanoparticles (NPs) are incorporated into the low-toxicity Biophotopol. By recording symmetrical gratings with a recording wavelength of 532 nm and using a 633 nm source at the corresponding Bragg condition, wavelength to which this material is not sensitive, it has been proved that NP diffusion mechanisms continue to happen even after the light exposure has been stopped. Thanks to this experimental data, we test different hypotheses regarding the different diffusion timescales, which has a variety of applications in the development of novel and high-refractive index modulation materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modification of the hygroscopic properties of a low-toxicity photopolymer

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Sirvent-Verdú, Joan Josep
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
The optimization of water-soluble, acrylate-based and low-toxicity holographic photopolymer (Biophotopol) functionalized with MPC (2-methacryloyloxyethyl phosphorylcholine) for holographic humidity sensing applications was researched. By adjusting the concentrations of triethanolamine (TEA) and MPC the material hygroscopic properties were tuned to enhance its response to environmental humidity variations. Experimental results demonstrated that higher MPC concentrations significantly increased Bragg wavelength redshift. These findings suggest that MPC-functionalized Biophotopol can be a promising candidate for advanced holographic sensors, offering enhanced sensitivity and real-time response capabilities for humidity monitoring in various applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ablation Cooling Mechanisms in MHz Femtosecond Laser Processing of Polymers

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
High repetition rate femtosecond laser processing offers significant benefits for ablation, as higher ablation efficiencies with reduced thermal effects can be achieved by selecting an optimal repetition rate range. In the heat accumulation regime, where the time between pulses is short enough to not allow the material to cool down significantly before the next pulse arrives, ablation cooling occurs. This effect redistributes the thermal energy into material removal, reducing the energy available for heat diffusion and minimizing the extended thermal effects [1]. However, ablation cooling is typically associated to the GHz regime, where plasma shielding dominates and diminishes the ablation efficiency [2], [3]. Nevertheless, polymers, with their low thermal diffusivity and phase transition temperatures, allow the observation of the ablation cooling effects in the MHz regime, avoiding the shielding effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lenses for See-Through Applications Recorded Without Prisms

  • Sirvent-Verdú, Joan Josep
  • Lloret, Tomás
  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Márquez, Andrés
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography offers a wide range of solutions for see-through display applications, where holographic optical elements can act either as mirrors or as waveguide couplers. In the latter case, one of the main challenges lies in achieving efficient mass fabrication. To address this limitation, the use of wavelength shift recording has been proposed, as it eliminates the need for prisms and index matching during the recording process. These elements are typically designed as slanted holographic gratings, recorded using either transmission or reflection geometries. Photopolymers as holographic recording materials are a promising solution for such applications because of their attractive optical properties. However, their inherent volume changes affect the optical performance of the recorded elements. In this paper, we propose the use of holographic lenses as wave couplers, which enables control over additional parameters such as magnification and optical aberrations. We analyze the limitations of this recording approach when prisms are not employed, and we investigate the influence of photopolymer shrinkage on hologram quality, comparing lenses recorded using transmission and reflection holography with different focal lengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Wavefront-based optical power model in holographic lenses stored in a green photopolymer

  • Lloret, Tomás
  • Ramirez, Manuel G.
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Navarro-Fuster, Víctor
  • Pascual, Inmaculada
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The growing development of augmented reality (AR) technologies has raised increasing interest in holographic optical elements (HOEs). Among these, holographic lenses (HLs) stand out for their lightness, flexibility, and capacity to be integrated into compact optical systems. In this study, we propose a theoretical framework that links the optical power of HLs to their recording geometry, explicitly relating it to the angles and distances defined during holographic exposure. The dependence of optical performance on these parameters was investigated using computer simulations, and the theoretical predictions were verified experimentally. For this purpose, HLs were recorded in 100-micron layers of a green photopolymer called Biophotopol. The close correspondence between the simulated and experimentally measured results demonstrates the robustness of the proposed model and highlights its potential for designing and optimizing holographic components in AR applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric Approach for Liquid Crystal Spatial Light Modulators Applications

  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Nájar, Guillem
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We focus on the application of polarimetric approaches for the characterization and the modelling of liquid crystal spatial light modulators, since they can fully exploit the inherent birefringent properties of such devices. In this work we cover the full breadth of possibilities: from the basic understanding of the 3D liquid crystal alignment, via rigorous numerical simulations, to the precise radiometric and polarimetric measurements of periodic structures, the 2D mapping of the properties for polarization and phase applications, and to the generation of polarized structured beams. Theory, experiment and simulation are combined consistently.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tracking solar optimization by using multiplexed holograms in Bayfol photopolymers

  • Mas-Abellán, Pedro
  • Beléndez, Pablo
  • Gea-Caselles, Jesús
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Pascual, Inmaculada
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
Multidisciplinary technologies are truly driving major transformations in industries, innovating to become more efficient. In this case, the need for more efficient renewable energy systems, such as solar energy, is combined with the innovation of using holographic photonic devices to avoid solar tracking devices as much as possible. In the end, a holographic device is created and characterized. This device is placed in front of a photocell, avoiding the use of tracking systems due to its wide acceptance angle. Furthermore, as it is a holographic optical element, the spectrum of solar radiation incident on the photocell is extended, which allows the photocell’s response to be optimized in each wavelength range. To manufacture these photonics devices, holographic recording and reconstruction assemblies were used by automating measurement. To expand the acceptance angle of solar radiation, the holographic multiplexing techniques are used, generating several holographic optical elements in a single area of the material so that the element that corresponds to the sun´s position acts at any given time. A commercial Bayfol® HX121 photopolymer was used as the holographic recording material to manufacture the holograms. This material meets the necessary characteristics to achieve high-performance holograms, facilitating the industrial scaling of this technique. The results obtained with the multiplexing technique allow for holograms with a 43° acceptance angle. Using three of these devices, a 129° angular sweep is possible without the need for tracking.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Development of MPC-functionalized photohydrogels as advanced holographic biosensors

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The development of new holographic materials for biosensing applications is a rapidly advancing field of research. Functionalized photohydrogels with specific chemical groups can act as holographic sensors for the detection of chemical species and physicochemical stimuli in different media. The interaction of molecules of biological interest, such as proteins, enzymes and antibodies, with the chemical groups modifies the optical properties of the hologram. These changes are used as optical signal transducers and can be measured with high sensitivity. This work focuses on optimizing the functionalization and storage of non-slanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N’-methylenebis(acrylamide). The photohydrogels are modified incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC), a monomer which contains a chemical group capable of specifically detecting the C-reactive protein (CRP). CRP is a well-known biomarker in medicine closely related to inflammatory processes and the prediction of cardiovascular diseases. The fabrication of the MPC functionalized photohydrogels involves two main stages: hydrogel matrix synthesis and photosensitization. In the first stage, MPC is distributed throughout the matrix. In the second stage, the hologram is stored and the MPC molecules are joined to the cross-linked polyacrylamide chains. The structural formation of the holograms and their behavior under different humidity conditions are analyzed for different MPC concentrations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Experimental study of PVA/AA photopolymers by means of pulsed laser exposure

  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work explores the use of a coherent nanosecond pulsed laser in holography with an acrylamide-based photopolymer (PVA/AA) material. By optimizing the photopolymer's composition, comparable results were achieved by adjusting the dye concentration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-efficiency holographic sensors for water detection in organic media

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Sirvent-Verdú, Joan Josep
  • Nieto-Rodríguez, Belén
  • Bravo Francés, Juan Carlos
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Monitoring trace water content in organic solvents is a fundamental requirement for industrial chemical recycling and purification processes. This work presents an eco-friendly optical sensing approach utilizing reflection holograms recorded in a low-toxicity, water-based photopolymer (Biophotopol). The developed device accurately quantifies water concentrations in tetrahydrofuran (THF) within a dynamic range of 0.03% to 7.00% v/v. Spectral analysis reveals a concentration-dependent dual response mechanism: elevated water levels induce polymer swelling, leading to Bragg wavelength redshifts, whereas pure or near-pure THF environments cause solvent-induced dehydration and corresponding blueshifts. Ultimately, this biodegradable holographic platform presents a robust, highly sensitive, and non-destructive alternative to conventional methodologies for trace-water quantification in industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Wavefront-based holographic lens optical power model for augmented reality applications

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Pascual, Inmaculada
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The use of holographic optical elements (HOEs) has grown significantly in recent years, particularly in augmented reality (AR) and see-through display systems. Among them, holographic lenses (HLs) have attracted special interest due to their versatility, light weight, and adaptability to compact optical architectures. In this work, we present a theoretical model that describes the optical power of HLs as a function of the recording geometry, relating it to the angles and distances involved in the holographic process. The influence of these parameters was computationally modeled, and the results were validated experimentally using HLs recorded in 100 µm layers of the green sensitive photopolymer Biophotopol. The strong agreement between theoretical and experimental results confirms the model’s accuracy and its applicability to the design and optimization of holographic components for AR systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fundamental Metrics and Methods for Holographic Imaging System Characterization

  • Lloret, Tomás
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Pascual, Inmaculada
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
This book chapter provides a comprehensive overview of the fundamentalmetrics and characterization tools for evaluating holographic imaging systems,with particular emphasis on analog holography and its optical performance. It describes the main holographic optical elements (HOEs) used in imagingapplications and defines the most relevant quality metrics employed to assesstheir performance, including aberration analysis, optical and image quality indicators, Fourier-based methods to study similarity between object and image, andrecording material quality metrics. The chapter also discusses the experimentalsetups and measurement instruments commonly used for quantitative analysis,such as CCD and CMOS detectors and Shack–Hartmann wavefront sensors(SHWS). Finally, it reviews recent advances and challenges in applying thesecharacterization techniques to emerging holographic and augmented realitysystems, highlighting the connection between classical optical metrology andmodern holographic imaging.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric-Based Analysis and Manufacturing of Dye-Doped Liquid Crystal Photoaligned Cells for the Visible Range

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Mena Ortiz, Emilio José
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
The accurate and controlled alignment of liquid crystals (LCs) in modern optical devices is of great importance. Photoalignment is one of the most appealing approaches for achieving more versatile alignment in designs. One of the most important parameters of these devices is the thickness and the homogeneity in the photoaligned area, especially in devices that introduce retardance. In this work, we propose a novel polarimetric-based method for the measurement of thickness of homogeneous liquid crystal cells that considers diattenuation effects and how they affect the retardance generated by a liquid crystal variable retarder (LCVR). We experimentally demonstrate the production of dye-doped liquid crystal (DDLC) devices, photoaligned in the visible range with a 532 nm laser light, of two different thicknesses with a very high spatial homogeneity. Thinner devices can be used across the whole visible spectrum despite the residual diattenuation at shorter wavelengths, whereas thicker ones achieve the best degree of polarization (DOP) in the transmitted wavefronts, close to 100%, at longer wavelengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Phase-Retrieval Algorithm for Hololens Resolution Analysis in a Sustainable Photopolymer

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
In this paper, the iterative Gerchberg–Saxton (GS) phase-retrieval algorithm is employed to reconstruct the amplitude spread function (ASF) of hololenses (HLs) recorded on a sustainable PVA/acrylate-based photopolymer, Biophotopol, when working with a CCD sensor. The main objective of this work is to characterize the spatial resolution of HLs, which are key components in a wide range of optical systems, including augmented reality (AR) glasses, combined information displays, and holographic solar concentrators. The GS algorithm, known for its efficiency in phase retrieval without prior knowledge of the phase of the optical system, is used to reconstruct the ASF, which is critical for mitigating information loss during imaging. Spatial resolution is quantified by convolving the ASFs obtained with two resolution tests (objective and subjective) and analyzing the resulting image using a CCD sensor. The convolution process allows an accurate assessment of lens performance, highlighting the resolution limits of manufactured lenses. The results show that the iterative GS algorithm provides a reliable method to improve image quality by recovering phase and amplitude information that might otherwise be lost, especially when using CCD or CMOS sensors. In addition, the recorded hololenses exhibit a spatial resolution of 8.9 lp/mm when evaluated with the objective Siemens star chart, and 30 cycles/degree when evaluated with the subjective Random E visual acuity test, underscoring the ability of Biophotopol-based HLs to meet the performance requirements of advanced optical applications. This work contributes to the development of sustainable high-resolution holographic lenses for modern imaging technologies, offering a promising alternative for future optical systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

‘All-with-visible-light’ patterning and application of tunable dye-doped liquid crystal q-plates for broadband vortex beams

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Gallego, Sergi
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photoalignment has made possible to produce very thin and extremely versatile photonic devices useful as phase-only diffractive elements or for polarization light conversion operations. In the usual scheme, the wavelength used for patterning, typically in the UV, is well outside the range intended for applications, in the visible or the infrared, likely to avoid increased absorption and degrading dichroism effects. Additionally, it would be desirable to have the possibility to do the patterning in the visible, widening the access of a much larger range of research laboratories to this technology. In this work, thanks to a detailed analysis of how diattenuation affects the retardation and the geometric phase generation, we demonstrate how an ‘all-with-visible-light’ approach is possible. We use the 532 nm wavelength to pattern a q-plate which is then evaluated across the whole visible spectrum to produce vortex beams, from the non-absorbing red range, to the green and blue parts, where strong diattenuation is present. The fabrication approach is also novel, where a variable spiral plate, in itself a photoaligned device, is used to generate the polarization structured patterning avoiding the need for complex rotational systems or programmable spatial light modulators. Last but not least, simple analytical expressions are obtained showing how diattenuation effects can be quantified in the co- and cross-polarization terms, enable to further conclude how the cross-talk is spatially separated in the specific case of vortex beams. A thorough theoretical and experimental analysis is done using dye-doped liquid crystal devices by examining the performance of the vortex beams in terms of voltage tunability across the whole visible spectrum. The achromaticity range is also quantified increasing from about 60 to 100 nm when moving from the blue to the red range of the spectrum, which is enough to be used in LED light and also for ultrafast lasers with a broad spectrum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multidimensional definition domain for the absolute retardance in digital backplane liquid crystal devices

  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Tunability of the retardance by liquid crystal on silicon microdisplays is at the heart of modern wavefront engineering in Optics and Photonics. However, a full knowledge of its dependence on voltage and illumination wavelength is not yet experimentally accessible. This would be very convenient, not only to set the optimal working conditions for applications, but also, on a more fundamental level, to explore the topology of the tunability of the phase retardance. The initial 2D nature of this parametric space increases in digital backplane devices, where the actual voltage depends on both the digital sequence addressed and on its low and high voltage values. Here, we demonstrate an efficient and accurate procedure to evaluate the absolute retardance across this multidimensional parametric space, which is given by applied voltage and wavelength, providing a novel and unprecedented insight.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast Laser Direct Writing of Diffraction Gratings in PVA/AA Photopolymer with Tunable Phase Modulation Mechanisms

  • Bernabeu, Andrés P.
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Nieto-Rodríguez, Belén
  • Puerto, Daniel
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
Diffractive optical elements (DOEs) are essential components in optical and photonic technologies, motivating the need for rapid mass production with high-precision fabrication methods. Photopolymers are particularly attractive for DOEs production because their optical phase can be modified via both surface and refractive index modulations. In this work, we report the fabrication of DOEs on PVA/AA photopolymers using ultrafast laser direct writing. By combining surface topography measurements with a phase depth model, we extract the surface and bulk phase depth contributions and demonstrate a transition from surface-dominated modulation at 1 kHz to bulk refractive index modification under cumulative conditions at 100 kHz. These outcomes highlight ultrafast laser direct writing as a powerful, rapid and controlled method for the high-quality and rapid fabrication of DOEs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization and optimization of the low-toxicity nanocomposite photopolymer Biophotopol for holographic couplers

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bravo Francés, Juan Carlos
  • Ferrández, J.
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we aim to study and exploit the photosensitivity properties of a low-toxicity photopolymer Biophotopol for the manufacturing of holographic couplers for see-through applications. The different geometries used to record such holographic gratings, both in transmission and reflection schemes, are explained. In our proposal, no prisms or index matching systems are used in the recording geometry, thanks to the wavelength shift between the recording and reconstruction steps. Moreover, the material’s composition is optimized and characterized for different recording schemes. We provide experimental evidence that the holographic optical elements maintain their designed properties by allowing the diffracted beam to propagate under Total Internal Reflection at the Bragg condition. The shrinkage present in this material is overcome by including a cross-linker monomer and Pt nanoparticles, while also increasing the average refractive index modulation of the holograms. This effect also causes the recording light to be coupled within the system, providing a single coupler that can guide different wavelengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tracking Solar Optimization in Renewable Energy Systems by Using Multiplexed Holograms in Bayfol® Photopolymers

  • Mas-Abellán, Pedro
  • Beléndez, Pablo
  • Gea-Caselles, Jesús
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Multidisciplinary technologies are truly driving major transformations in industries, innovating to become more efficient. The need for more efficient renewable energy systems, such as solar energy, has recently been addressed with the innovation of using holographic photonic devices to avoid solar tracking devices as much as possible. In this work, a multiplexed holographic device is created and characterized for use in front of a photocell, thereby eliminating the need for tracking systems due to its wide acceptance angle and high diffraction efficiency. Commercial Bayfol® HX121 photopolymer was used as the holographic recording material to manufacture holograms, achieving high performance and facilitating the industrial scaling of this technique. Results obtained using the multiplexing technique enable low-frequency holograms (478 lines/mm) with a 43° acceptance angle. Using three of these devices, a 129° angular sweep is possible without the need for tracking.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Challenges and impact of the grating vector direction in high-frequency LC-SLM binary phase gratings

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Sirvent-Verdú, Joan Josep
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Márquez, Andrés
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Spatial Light Modulators (SLMs) typically use PA-LCoS microdisplays, known for high resolution and small pixel size, for phase-only modulation. However, different phenomena related to the cross-talk, fringing fields between pixels, and out-of-plane reorientation of the liquid crystal director degrade the performance of pixelated SLM devices. The technology faces the challenge of overcoming these phenomena as novel applications require higher pixel size resolutions and smaller pixel sizes. This work applies a numerical workflow that permits the analysis of the different parameters that set up a PA-LCoS microdisplay, e.g., fill factor, pixel size, external voltage and the influence of the LC director and the interaction of light through the structure. Specifically, we focus our analysis on the impact of high-frequency binary phase gratings on the radiometric and polarimetric response with orthogonal grating vectors. The heterogenous LC distribution as a function of the grey level along the 3D structure and the inhomogeneous distribution of the Stokes parameters are analysed, setting up a framework to analyse the nonlinear behaviour of the system and its impact on diffraction and polarimetric performance in future microdisplays with higher resolutions and smaller pixel sizes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of surface structures for PVA/AA photopolymer functionalization by ultrafast laser processing

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Gallego, Sergi
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Ultrafast laser processing provides a powerful approach for tailoring the surface morphology of photosensitive materials with high spatial precision. In this work, we investigate the formation of surface relief structures in poly(vinyl alcohol)/acrylamide (PVA/AA) photopolymers under femtosecond laser irradiation, focusing on the role of the repetition rate in the photopolymerization process. Experiments were performed at 1030 nm using 220 fs pulses, analyzing single-pulse irradiation and multipulse regimes, where repetition rates of 1 kHz and 60 kHz were explored. The resulting structures exhibit a Gaussian-like morphology associated with the diffusion-driven monomer redistribution. A systematic study of the structure height as a function of the fluence reveals a clear dependence on both the number of pulses and the repetition rate. In particular, lower repetition rates lead to larger structure heights under identical irradiation conditions, indicating that the temporal spacing between pulses enhances monomer diffusion towards the irradiated region. These results highlight the role of repetition rate as a key parameter governing the balance between photopolymerization and mass transport, enabling controlled surface structuring in photopolymer materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailored adaption of thermal diffusion by ablation cooling on polymers through unique dependence on laser repetition rate

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
High repetition rate femtosecond laser processing reduces thermal effects through ablation cooling. This often-overlooked effect occurs when ablation is induced in the heat accumulation regime, typically associated with the GHz repetition rate regime, where undesirable shielding effects occur. However, the low thermal diffusivity and phase transition temperatures of polymers enable ablation cooling to be observed at lower repetition rates (<1 MHz), while preventing shielding effects. Separating these phenomena offers insights into ablation cooling effects that are applicable to a broader range of materials in GHz regimes. This work analyzes the thermal and ablative effects on poly(ethylene terephthalate) (PET) surfaces resulting from high repetition rate (10 kHz – 1 MHz) femtosecond (450 fs) laser irradiation at λ = 515 nm, for different fluences (0.91 – 1.68 J/cm2) and pulse numbers (200 – 400). The results evidence that extended thermal diameters decrease at higher repetition rates (∼1 MHz) compared to the 40 – 100 kHz regime due to ablation cooling, resulting in more optimal processing. This effect is independent of fluence and pulse number, being influenced only by repetition rate. A thermal model explains the reduction of thermal effects and saturation of ablation diameters, serving as a predictive tool for modifications induced at high repetition rates.