Pasar al contenido principal

FOTONICA 3D PARA IMAGENES Y COMUNICACIONES CON LASERES ULTRARRAPIDOS Y CONTINUOS

PID2024-161610OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Quantitative water determination in THF/H2O mixtures using a sustainable holographic sensor with operational reusability

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Nieto-Rodríguez, Belén
  • Lloret, Tomás
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The development of efficient water sensors for organic media is critical for industrial solvent recycling and storage. In this work, reflection holograms recorded in a low-toxicity and water-based photopolymer are proposed as eco-friendly optical sensors for detecting water in tetrahydrofuran (THF). The proposed sensor shows a dynamic range from 0.03% (Limit of Detection) up to 7.00% v/v of water in THF. Furthermore, the device is reusable for concentrations ≤ 5.00% v/v, where the polymer matrix operates within an elastic regime that allows for consistent recovery. The optical response was monitored via Bragg wavelength shifts and diffraction efficiency variations, complemented by absorption and weight tracking analysis. Results reveal a dual sensing mechanism: swelling-induced redshifts in water-rich mixtures and shrinkage-induced blueshifts in nearly pure THF. Kogelnik’s Coupled Wave Analysis confirmed the reproducibility of the structural changes. This study demonstrates that biodegradable holographic sensors can provide a quantitative, sustainable, and reliable solution for monitoring solvent quality in industrial environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Full control of arbitrary linearly polarized structured light wavefronts using PA-LCoS devices

  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel-Aligned Liquid Crystal on Silicon (PA-LCoS) Spatial Light Modulators (SLMs) are highly adaptable devices capable of dynamically generating different beams through precise phase and polarization modulation. Within the various types of beams that can be produced with these devices, linearly polarized structured polarization beams offer unique properties that are advantageous for applications in fields such as microscopy, photoalignment, optical trapping, and communications. Generating purely linearly polarized structured beams is very challenging and requires a good characterization of the PA-LCoS. In this study, we apply Stokes polarimetric techniques twice: first to characterize the 2D retardance, and second to verify the fidelity of the generated structured light. We validate our approach by evaluating and compensating for spatial inhomogeneities for uniform wavefronts. Then, a wide variety of linearly polarized structured light beams are generated and metrologically evaluated to learn the uncertainty expected as a function of the complexity of the design. This approach not only enhances the stability and uniformity of the output beams but also broadens the potential for PA-LCoS SLMs in advanced optical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ray tracing for holographic waveguides: image quality prediction in see-through systems

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Francés, Jorge
  • Neipp, Cristian
  • Márquez, Andrés
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We present a sequential ray tracing tool, HoloTraceX, to evaluate, prior to experimental recording, the image quality of see-through waveguides formed by a glass substrate and two coupling/decoupling holograms. The model incorporates exact geometry, refractions and reflections with Fresnel coefficients, and volume holography using Kogelnik coupled wave theory to estimate ray efficiency. Wavefront maps and image metrics are calculated along the guided propagation, including chromatic dispersion and angular tolerances. Wavelength and angle scanning allows regions of high efficiency and low aberration to be identified, optimising the design of the couplers and the exit pupil. The results demonstrate that this preliminary analysis would optimise the holographic recording geared towards the optical architecture of see-through AR systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ablation cooling and thermal regimes in high repetition rate ultrafast laser processing of commercial polymers

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Ultrafast laser processing of polymers is strongly influenced by the repetition rate of the irradiation, which determines the balance between heat accumulation and material removal mechanisms. In this work, we investigate the response of a commercial polymer, poly(ethylene terephthalate) (PET), under femtosecond laser irradiation at two different repetition rates: 1 kHz and 60 kHz. Experiments were performed at a wavelength of 1030 nm with 220 fs pulses and a pulse energy of 88 μJ using a beam radius of approximately 118 μm. The results reveal clear differences in the morphology of the induced structures between the two irradiation regimes. At 1 kHz, extended thermal halos surrounding the ablation crater are observed, associated with local temperature rise above the glass transition threshold. When the repetition rate is increased to 60 kHz, the ablation volumes become significantly larger while the surrounding thermal halos are reduced. These results indicate that higher repetition rates promote more effective material removal while limiting the extent of the thermally affected regions. This behavior suggests that efficient ablation can act as a heat dissipation mechanism, consistent with the hypothesis of ablation cooling in ultrafast laser processing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Development of a tailored cellulose-derived binder for sustainable hydrogel photopolymers

  • Romo Ríos, Adrián Enrique
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
We have evaluated two water soluble cellulose derivatives Hydroxyethylcellulose (HEC) and Methylcellulose (MC) as binders for hydrogel photopolymer formulations with the purpose of using it for holographic applications. We prepared different aqueous solutions with increasing polymer concentrations and cast them into films, after controlled drying (temperature and relative humidity), we analyzed the samples in order to evaluate their final characteristics and optical compatibility. The results have shown that the binder concentration and drying process affect the final binder appearance and residual contents, which determine the surface smoothness and the film’s opacity, these factors are critical for holographic applications because they change the refractive index contrast and scattering losses in the sample. HEC appears more promising compared to MC as a binder for hydrogel photopolymers because the formulation, processing and final appearance show minimal optical heterogeneity and ensured compatibility with the optics involved in the photopolymerization reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The effect of thermal parameters on the ultrafast laser processing of commercial polymers at high repetition rates

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Neipp, Cristian
  • Mena Ortiz, Emilio José
  • Grojo, David
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
Ultrafast laser processing has emerged as a powerful tool for precise material modification, enabling the micromachining of a wide range of materials, including polymers. The high intensities achieved with femtosecond pulses allow nonlinear absorption processes, such as multiphoton absorption, facilitating both surface structuring and bulk modification. Polymers, in particular, are of growing industrial interest due to their favorable properties, cost-effectiveness, and biocompatibility, making them suitable for advanced manufacturing applications such as microcavity fabrication. In this work, the ablation behavior and laser– polymer interaction are investigated in commercial films (PVC, PET, PP, and PDMS) by varying key parameters, including repetition rate (1 kHz–1 MHz), pulse duration (fs to ns), and wavelength (515 and 1030 nm). Experimental results, supported by thermal modeling, reveal distinct thermal regimes depending on repetition rate. The thermal properties of each material play a decisive role in heat diffusion processes and determine the different effects observed in each. Efficient material removal with reduced heat-affected zones is achieved in the sub-MHz regime, providing evidence of ablation cooling. These findings improve the understanding of high-repetition-rate effects and support the optimization of ultrafast laser micromachining strategies for polymer processing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Precision writing and tracking of optical vortices using nonlinear optics

  • Cocotos, Vasilios
  • Sánchez-Montes, Adriana R.
  • Dudley, Angela
  • Singh, Sachleen
  • Peters, Cade
  • Márquez, Andrés
  • Francés, Jorge
  • Forbes, Andrew
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
We use a nonlinear optical process to write optical vortices from the infrared (IR) to the near-IR, and the same nonlinear process to track the initial IR optical vortices using a novel form of phase reconstruction by nonlinear digital holography. This also allows us to monitor the creation and annihilation of phase singularities, their individual topological charges and to extract the modal components of an optical field. In particular, we show that singularities can be tracked with a 3x3-pixel precision, limited not by the technique itself, but by the stability of the experimental setup. By carefully calibrating the magnification of both the encoding and recording devices, we are able to prescribe and implement well-defined trajectories for the singularities. This control over singularity motion allows one to illustrate algebraic operations through physical overlap, for example, adding or canceling charges (+1 and –1). Finally, we exploit the ability to track singularity positions as a quantitative probe of mode composition: When combining a vortex and a Gaussian mode, the displacement of the singularity provides a direct measure of the relative modal contribution. Our findings enhance the toolkit for monitoring the dynamics of phase singularities, particularly in wavelengths that are challenging to detect.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Platinum nanoparticles effects in hologram's formation processes in a low-toxicity photopolymer material

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bravo Francés, Juan Carlos
  • Fernandez, Roberto
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we present a study related to photopolymerization dynamics in a nanocomposite material. Our experimental results reveal a significant impact on the real-time hologram formation dynamics when platinum (Pt) nanoparticles (NPs) are incorporated into the low-toxicity Biophotopol. By recording symmetrical gratings with a recording wavelength of 532 nm and using a 633 nm source at the corresponding Bragg condition, wavelength to which this material is not sensitive, it has been proved that NP diffusion mechanisms continue to happen even after the light exposure has been stopped. Thanks to this experimental data, we test different hypotheses regarding the different diffusion timescales, which has a variety of applications in the development of novel and high-refractive index modulation materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Translation without decision: artificial intelligence and the illusion of human responsibility

  • González Pastor, Diana
  • Rico Pérez, Celia
The integration of artificial intelligence into translation does not merely require new tools or skills, but a socio-technical redefinition of what we understand by translation, agency, and responsibility. This issue cannot be resolved through abstract ethical principles alone, but rather through critical frameworks such as data governance, the ethics of care, and the ethical training of translators. By “recycling” the translational decisions embedded in training data while erasing their contexts and authorship, artificial intelligence systems applied to translation generate a structural asymmetry between responsibility and control. In this article, we argue that addressing this asymmetry requires activating governance mechanisms that restore the human factor as the authority responsible for decision-making. The implications of this analysis are examined in relation to professional responsibility, the ethics of care, and translator training, suggesting that the future of translation depends not only on ethical compliance but also on the ability to reclaim decision-making power in AI-mediated environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ablation Cooling Mechanisms in MHz Femtosecond Laser Processing of Polymers

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
High repetition rate femtosecond laser processing offers significant benefits for ablation, as higher ablation efficiencies with reduced thermal effects can be achieved by selecting an optimal repetition rate range. In the heat accumulation regime, where the time between pulses is short enough to not allow the material to cool down significantly before the next pulse arrives, ablation cooling occurs. This effect redistributes the thermal energy into material removal, reducing the energy available for heat diffusion and minimizing the extended thermal effects [1]. However, ablation cooling is typically associated to the GHz regime, where plasma shielding dominates and diminishes the ablation efficiency [2], [3]. Nevertheless, polymers, with their low thermal diffusivity and phase transition temperatures, allow the observation of the ablation cooling effects in the MHz regime, avoiding the shielding effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lenses for See-Through Applications Recorded Without Prisms

  • Sirvent-Verdú, Joan Josep
  • Lloret, Tomás
  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Márquez, Andrés
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography offers a wide range of solutions for see-through display applications, where holographic optical elements can act either as mirrors or as waveguide couplers. In the latter case, one of the main challenges lies in achieving efficient mass fabrication. To address this limitation, the use of wavelength shift recording has been proposed, as it eliminates the need for prisms and index matching during the recording process. These elements are typically designed as slanted holographic gratings, recorded using either transmission or reflection geometries. Photopolymers as holographic recording materials are a promising solution for such applications because of their attractive optical properties. However, their inherent volume changes affect the optical performance of the recorded elements. In this paper, we propose the use of holographic lenses as wave couplers, which enables control over additional parameters such as magnification and optical aberrations. We analyze the limitations of this recording approach when prisms are not employed, and we investigate the influence of photopolymer shrinkage on hologram quality, comparing lenses recorded using transmission and reflection holography with different focal lengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Comparative study of continuous and pulsed exposure in transmission hologram gratings

  • Mena Ortiz, Emilio José
  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this study, a nanosecond coherent laser (pulse duration of 5 ns and maximum repetition rate of 10 Hz) and a diode-pumped solid-state laser operating in continuous-wave (CW) mode, both at a wavelength of λ = 532 nm, were used to investigate the differences between these regimes in the recording of holographic gratings in an acrylamide-based photopolymer (PVA/AA). The photopolymer composition was optimized to enable a direct comparison between CW and pulsed exposures at different repetition rates while maintaining similar total exposure energies. This was achieved using a versatile experimental setup that allows switching between both lasers while keeping all optical elements fixed, ensuring identical geometrical recording conditions. The evolution of diffraction efficiency during exposure was analyzed in order to characterize the properties of the recorded volume gratings. The results show that pulsed recordings tend to reach similar maximum diffraction efficiencies regardless of the repetition rate, while the polymerization dynamics is slower than in the CW regime.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast Laser-Induced Microstructures in PVA/AA Photopolymer for Advanced Surface Functionalization

  • Gallego, Sergi
  • Bernabeu, Andrés P.
  • Sirvent-Verdú, Joan Josep
  • Hernández Prados, Antonio
  • Neipp, Cristian
  • Puerto, Daniel
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Hernández Prados, Antonio|||/items/f105e529-b94b-4ab0-848c-cf654d19a6ba
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Ultrafast laser processing is established as a powerful and reliable tool for inducing micro and nanoscale surface modifications in a wide variety of materials. In parallel, acrylamide-based photopolymers have been extensively used as recording media for holographic and diffractive optical applications due to their optimal response to laser irradiation. In this work, we investigate the interaction of ultrashort pulses (fs – ns) with PVA/AA photopolymers under high repetition rate irradiation (1 kHz – 1 MHz) at two different wavelengths (515 nm and 1030 nm), exploring their potential for advanced surface functionalization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High repetition rate ultrafast laser processing of commercial polymers: Ablation cooling and thermal regimes

  • Bernabeu, Andrés P.
  • Bottin, Nicolas
  • Benali, Wissal
  • Sopeña, Pol
  • Puerto, Daniel
  • Mena Ortiz, Emilio José
  • Grojo, David
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, the ablation behavior and laser–polymer interaction are systematically investigated by varying key laser parameters, including repetition rate (1 kHz–1 MHz), pulse duration (fs and ns), and wavelength (515 and 1030 nm), across several commercial polymer films (PVC, PET, PP, and PDMS). The irradiation results are characterized optically and supported by complementary thermal modeling. Distinct thermal regimes are identified as a function of repetition rate, demonstrating that efficient material removal with reduced heat-affected zones can be achieved in the sub-MHz regime, providing clear evidence of ablation cooling. Furthermore, the extent of these cooling effects is shown to depend on both the temporal and spectral laser regimes. These findings provide deeper insight into high-repetition-rate laser–polymer interactions, clarify the role of shielding and heat diffusion mechanisms, and enable the development of optimized ultrafast laser micromachining strategies for polymer processing applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-efficiency holographic sensors for water detection in organic media

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Sirvent-Verdú, Joan Josep
  • Nieto-Rodríguez, Belén
  • Bravo Francés, Juan Carlos
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Monitoring trace water content in organic solvents is a fundamental requirement for industrial chemical recycling and purification processes. This work presents an eco-friendly optical sensing approach utilizing reflection holograms recorded in a low-toxicity, water-based photopolymer (Biophotopol). The developed device accurately quantifies water concentrations in tetrahydrofuran (THF) within a dynamic range of 0.03% to 7.00% v/v. Spectral analysis reveals a concentration-dependent dual response mechanism: elevated water levels induce polymer swelling, leading to Bragg wavelength redshifts, whereas pure or near-pure THF environments cause solvent-induced dehydration and corresponding blueshifts. Ultimately, this biodegradable holographic platform presents a robust, highly sensitive, and non-destructive alternative to conventional methodologies for trace-water quantification in industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric-Based Analysis and Manufacturing of Dye-Doped Liquid Crystal Photoaligned Cells for the Visible Range

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Mena Ortiz, Emilio José
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
The accurate and controlled alignment of liquid crystals (LCs) in modern optical devices is of great importance. Photoalignment is one of the most appealing approaches for achieving more versatile alignment in designs. One of the most important parameters of these devices is the thickness and the homogeneity in the photoaligned area, especially in devices that introduce retardance. In this work, we propose a novel polarimetric-based method for the measurement of thickness of homogeneous liquid crystal cells that considers diattenuation effects and how they affect the retardance generated by a liquid crystal variable retarder (LCVR). We experimentally demonstrate the production of dye-doped liquid crystal (DDLC) devices, photoaligned in the visible range with a 532 nm laser light, of two different thicknesses with a very high spatial homogeneity. Thinner devices can be used across the whole visible spectrum despite the residual diattenuation at shorter wavelengths, whereas thicker ones achieve the best degree of polarization (DOP) in the transmitted wavefronts, close to 100%, at longer wavelengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Materiales fotopoliméricos ambientalmente compatibles para aplicaciones holográficas de vista a través: optimización del Biophotopol

  • Gallego, Sergi
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Moya Aliaga, Adrián
  • Hernández Prados, Antonio
  • Neipp, Cristian
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Hernández Prados, Antonio|||/items/f105e529-b94b-4ab0-848c-cf654d19a6ba
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En los últimos años, el auge de aplicaciones de realidad aumentada y sistemas de vista a través ha vuelto a situar a la holografía y a los materiales de registro holográfico en un lugar destacado, con especial relevancia en el desarrollo de visores y gafas inteligentes. En este contexto, la toxicidad de los materiales adquiere una importancia crítica, dada su proximidad a ojos, boca y mucosas. Con el objetivo de adaptar Biophotopol a los requisitos específicos de estas aplicaciones, se han desarrollado nuevas composiciones orientadas a mejorar su respuesta en el registro de hologramas con altas frecuencias espaciales, franjas de interferencia altamente inclinadas y condiciones en las que el encogimiento del material durante el registro resulta determinante. En este trabajo se analizan estas propiedades y se optimiza el comportamiento del material para su uso en aplicaciones de vista a través basadas en acopladores holográficos de guías de onda.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interplay between heat accumulation and material removal in ultrafast laser processing of PVC

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Bottin, Nicolas
  • Puerto, Daniel
  • Gallego, Sergi
  • Grojo, David
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The control of heat-affected modifications is a major challenge in ultrafast laser processing of polymers due to their low thermal diffusivity and phase transition temperatures. While these effects are typically localized in the vicinity of the ablation region, the interaction may evolve from positive heat-affected deformation to efficient material removal, depending on the irradiation conditions. In this work, we investigate how pulse duration (220 fs – 32 ps), beam radius (40 –118 μm), and repetition rate (100 Hz – 60 kHz) govern the laser-induced response of poly(vinyl chloride) (PVC) under 1030 nm ultrafast laser irradiation. These results reveal that heat accumulation strongly influences the interaction behavior even under fluence conditions above the single-pulse ablation threshold. Under heat accumulation conditions, heat-affected modifications decrease beyond a certain repetition rate, while ablation remains efficient. This behavior suggests that material removal may reduce the fraction of deposited energy contributing to heat diffusion into the surrounding region. These findings suggest that, in polymers with low thermal diffusivity, efficient material removal can contribute to reducing heat-affected modification at repetition rates well below the GHz regime typically discussed in the context of ablation cooling. This enables the investigation of this regime under conditions where the influence of additional effects, such as plasma or particle shielding is reduced. This work provides new insights into the interplay between heat accumulation and material removal in ultrafast laser processing, offering guidelines for the controlled fabrication of surface structures and the optimization of laser processing conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization of holographic gratings in PVA/AA using coherent nanosecond laser exposure

  • Mena Ortiz, Emilio José
  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work investigates the performance of a polyvinyl alcohol/acrylamide-based photopolymer (PVA/AA) under pulsed and continuous-wave (CW) laser exposure for holographic recording. Using a versatile setup that allows direct comparison between both regimes, diffraction efficiency (DE), angular responses, and material parameters were analyzed. Comparable maximum DE was achieved with both CW and pulsed laser exposure; however, the pulsed regime produces stronger attenuation along the grating depth, which emphasizes the need to lower the dye concentration. Furthermore, the temporal evolution of DE reveals a smaller influence of oxygen inhibition under CW exposure. Finally, second-order angular reconstructions confirm that pulsed gratings exhibit a better sinusoidal modulation, especially at low frequency rates. These results enhance the understanding of how pulsed exposure affects holographic recording and open pathways for optimizing photopolymer systems in advanced technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mueller matrix polarimetry in the near-field of micro and nanophotonic structures

  • Francés, Jorge
  • Lizana Tutusaus, Ángel
  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.
  • Estévez, Irene
  • Campos, Juan
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work investigates the polarimetric behavior, with a special focus on depolarization effects, of a Ronchi-type metallic grating using the split-field finite-difference time-domain (SF-FDTD) method. The study is based on pointwise computation of Mueller matrices in both near- and far-field regimes, for both subwavelength and for suprawavelength scales, and different fill factors. In the near field, we find that local Mueller matrices often lead to covariance matrices with negative eigenvalues. Even though this is typically considered a breakdown of physical realizability, we demonstrate that they accurately encode the polarimetric transfer function of the structures. The detailed physical study of the results using Mueller matrix derived polarimetric descriptors needs to be restricted to regions where all eigenvalues remain positive, with clear trends: strong depolarization for subwavelength periods and low fill factors, while higher degrees of purity and reduced anisotropy are observed for larger periods and higher fill factors. Far-field Mueller matrices, associated with the diffraction orders, are always physically realizable and exhibit high polarimetric purity. The contrast between near- and far-field responses emphasizes the need for careful interpretation of local polarimetric data in nanostructures. These results support the use of polarimetric descriptors as valuable tools in the characterization of nanoscale optical systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

‘All-with-visible-light’ patterning and application of tunable dye-doped liquid crystal q-plates for broadband vortex beams

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Gallego, Sergi
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photoalignment has made possible to produce very thin and extremely versatile photonic devices useful as phase-only diffractive elements or for polarization light conversion operations. In the usual scheme, the wavelength used for patterning, typically in the UV, is well outside the range intended for applications, in the visible or the infrared, likely to avoid increased absorption and degrading dichroism effects. Additionally, it would be desirable to have the possibility to do the patterning in the visible, widening the access of a much larger range of research laboratories to this technology. In this work, thanks to a detailed analysis of how diattenuation affects the retardation and the geometric phase generation, we demonstrate how an ‘all-with-visible-light’ approach is possible. We use the 532 nm wavelength to pattern a q-plate which is then evaluated across the whole visible spectrum to produce vortex beams, from the non-absorbing red range, to the green and blue parts, where strong diattenuation is present. The fabrication approach is also novel, where a variable spiral plate, in itself a photoaligned device, is used to generate the polarization structured patterning avoiding the need for complex rotational systems or programmable spatial light modulators. Last but not least, simple analytical expressions are obtained showing how diattenuation effects can be quantified in the co- and cross-polarization terms, enable to further conclude how the cross-talk is spatially separated in the specific case of vortex beams. A thorough theoretical and experimental analysis is done using dye-doped liquid crystal devices by examining the performance of the vortex beams in terms of voltage tunability across the whole visible spectrum. The achromaticity range is also quantified increasing from about 60 to 100 nm when moving from the blue to the red range of the spectrum, which is enough to be used in LED light and also for ultrafast lasers with a broad spectrum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast Laser Direct Writing of Diffraction Gratings in PVA/AA Photopolymer with Tunable Phase Modulation Mechanisms

  • Bernabeu, Andrés P.
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Nieto-Rodríguez, Belén
  • Puerto, Daniel
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
Diffractive optical elements (DOEs) are essential components in optical and photonic technologies, motivating the need for rapid mass production with high-precision fabrication methods. Photopolymers are particularly attractive for DOEs production because their optical phase can be modified via both surface and refractive index modulations. In this work, we report the fabrication of DOEs on PVA/AA photopolymers using ultrafast laser direct writing. By combining surface topography measurements with a phase depth model, we extract the surface and bulk phase depth contributions and demonstrate a transition from surface-dominated modulation at 1 kHz to bulk refractive index modification under cumulative conditions at 100 kHz. These outcomes highlight ultrafast laser direct writing as a powerful, rapid and controlled method for the high-quality and rapid fabrication of DOEs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High environmentally compatible photopolymer for waveguide couplers

  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Gallego, Sergi
  • Puerto, Daniel
  • Neipp, Cristian
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Augmented reality and see-through displays have become a hot topic in holography and in the development of holographic recording materials. Designing holograms for these applications depends strongly on the recording material, and therefore both the behaviour and the display must be adapted to the material’s properties. In smart glasses, the photopolymer is located close to the mucous membranes—eyes, nose, and mouth—so the use of non-toxic materials is highly desirable. In this work, we explore the optical characteristics of Biophotopol, a highly environmentally compatible photopolymer, for waveguide couplers used in see-through applications. Biophotopol exhibits higher shrinkage, around 4%, compared to other commercial photopolymers (1.4%). However, we demonstrate that it is still possible to obtain good results in the recording of these holographic optical elements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of surface structures for PVA/AA photopolymer functionalization by ultrafast laser processing

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Gallego, Sergi
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Ultrafast laser processing provides a powerful approach for tailoring the surface morphology of photosensitive materials with high spatial precision. In this work, we investigate the formation of surface relief structures in poly(vinyl alcohol)/acrylamide (PVA/AA) photopolymers under femtosecond laser irradiation, focusing on the role of the repetition rate in the photopolymerization process. Experiments were performed at 1030 nm using 220 fs pulses, analyzing single-pulse irradiation and multipulse regimes, where repetition rates of 1 kHz and 60 kHz were explored. The resulting structures exhibit a Gaussian-like morphology associated with the diffusion-driven monomer redistribution. A systematic study of the structure height as a function of the fluence reveals a clear dependence on both the number of pulses and the repetition rate. In particular, lower repetition rates lead to larger structure heights under identical irradiation conditions, indicating that the temporal spacing between pulses enhances monomer diffusion towards the irradiated region. These results highlight the role of repetition rate as a key parameter governing the balance between photopolymerization and mass transport, enabling controlled surface structuring in photopolymer materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric characterization methodology for fabrication and study of dye-doped liquid crystal cells

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Mena Ortiz, Emilio José
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
This research demonstrates a polarimetric approach to determine the thickness and spatial homogeneity of dye-doped liquid crystals (DDLC), with their molecules aligned using the photoalignment technique. This method also accounts for diattenuation and is particularly relevant for azo dye doped LC cells fabricated and characterised using visible-range optics. A device is produced via double-sided photoalignment and evaluated as liquid crystal variable retarders (LCVRs), showing high DOP and the ability to generate linear/elliptical/circular polarisation with low driving voltages. In this work, we address the application of the photoalignment technique exclusively using visible light without UV infrastructure, while quantifying how the diattenuation constraints usable operating windows depending on the wavelength used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailored adaption of thermal diffusion by ablation cooling on polymers through unique dependence on laser repetition rate

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
High repetition rate femtosecond laser processing reduces thermal effects through ablation cooling. This often-overlooked effect occurs when ablation is induced in the heat accumulation regime, typically associated with the GHz repetition rate regime, where undesirable shielding effects occur. However, the low thermal diffusivity and phase transition temperatures of polymers enable ablation cooling to be observed at lower repetition rates (<1 MHz), while preventing shielding effects. Separating these phenomena offers insights into ablation cooling effects that are applicable to a broader range of materials in GHz regimes. This work analyzes the thermal and ablative effects on poly(ethylene terephthalate) (PET) surfaces resulting from high repetition rate (10 kHz – 1 MHz) femtosecond (450 fs) laser irradiation at λ = 515 nm, for different fluences (0.91 – 1.68 J/cm2) and pulse numbers (200 – 400). The results evidence that extended thermal diameters decrease at higher repetition rates (∼1 MHz) compared to the 40 – 100 kHz regime due to ablation cooling, resulting in more optimal processing. This effect is independent of fluence and pulse number, being influenced only by repetition rate. A thermal model explains the reduction of thermal effects and saturation of ablation diameters, serving as a predictive tool for modifications induced at high repetition rates.