Pasar al contenido principal

FOTONICA PARA IMAGEN Y COMUNICACIONES CON LASERES CONTINUOS Y ULTRARAPIDOS

PID2021-123124OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 85
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manufacturing reflection holographic couplers for see-through applications recorded in photopolymers without prisms: an experimental validation

  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Piñol Galera, Carla
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the present work, the viability of a novel recording geometry to produce reflection holographic couplers is analyzed. Recalling the idea of previous works, photopolymers are used as the recording material, as they are well-suited for the intended see-through application. Moreover, Kogelnik’s theory fundamentals give us the proper background to examine the proposed design, where no prisms or microlenses arrays are used. Aiming to support the analysis, we provide experimental evidence that the produced gratings exhibit the correct properties to work as a coupler.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Customized PVA/AA diffraction gratings by high repetition rate femtosecond direct laser writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
In this work, we investigate the behavior of poly(vinyl alcohol)/acrylamide photopolymers (PVA/AA) under high repetition rate (1 kHz – 1 MHz), multipulse (1 – 20), femtosecond (450 fs) laser irradiation at λ=515 nm, varying fluence values from 0.005 to 1.24 J/cm2. Our results reveal that a wide range of nano/microstructures with varying heights and shapes can be induced, as a consequence of monomer diffusion and swelling effects. Furthermore, we demonstrate that by adjusting the irradiation parameters, it is possible to achieve precise control over the fabricated structures, enabling potential applications not only in optics, but also in tribology and cell adhesion and growth. As an application of these results, we successfully fabricated high-period diffraction gratings at high repetition rates with diffraction efficiencies close to the theoretical maximum. These findings provide new insights into the ultrafast lasermatter interaction in photopolymers and open new scenarios for the fabrication of functional polymeric surfaces.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Numerical Estimation of Bending in Holographic Volume Gratings by Means of RCWA and Deep Learning

  • Colomina-Martínez, Jaume
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Moya Aliaga, Adrián
  • Francés, Jorge
  • Neipp, Cristian
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
In this paper, we introduce a novel approach to model bending phenomena on holographic volume gratings based on Rigorous Coupled Wave Analysis (RCWA), in which the bending as a phase in the dielectric permittivity expansion is introduced, and the Shooting Method (SM) is employed to solve the resulting system of equations. Further validation of our model is conducted by comparing its predictions to those obtained from reference Finite-Difference Time-Domain (FDTD) simulations and Coupled Wave Theory (CWT, referring to Kubota’s model that includes the bending phenomenon). Furthermore, we propose a methodology for estimating the bending from the diffraction efficiency curves in transmission volume gratings based on deep learning models, with a subsequent study of their accuracy and applicability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Novel PCA-Based Lower-Dimensional Remapping of the Solution Space for a Genetic Algorithm Optimization: Estimating the Director Distribution in LC-Based SLM Devices

  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Neipp, Cristian
  • Beléndez, Augusto
  • Francés, Jorge
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work introduces a novel computational approach based on Principal Component Analysis (PCA) for dimensionality reduction of the solution space in optimisation problems with known linear interdependencies among solution variables. By creating synthetic datasets with deliberately engineered properties and applying PCA, the solution space’s remapping significantly reduces its dimensionality, leading to faster computation and more robust convergence in optimisation processes. We demonstrate this method by integrating it with a Genetic Algorithm (GA) for solving the optimal director distribution in liquid crystal (LC) devices, specifically addressing 2D and complex 3D spatial light modulator (SLM) structures such as twisted nematic liquid crystals (TN-LC) and parallel-aligned liquid crystal on silicon (PA-LCoS), respectively. The phase profiles obtained from the director vector distributions for horizontal and vertical high-frequency binary phase gratings closely match the theoretical values derived from minimising the traditional elastic Frank–Oseen functional via Euler–Lagrange equations. Beyond this specific application, our method offers a general framework for reducing computational complexity in optimisation problems by directly reducing the dimensionality of the solution space. This approach is applicable across various optimisation scenarios with well-known linear interdependencies among solution variables, enabling significant reductions in computational costs and improvements in robustness and convergence.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adulterant detection in peppermint oil by means of holographic photopolymers based on composite materials with liquid crystal

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we use a holographic dispersed liquid crystal (HPDLC) to detect a substance added as adulterant to peppermint oil. Volume diffraction gratings are recorded in two samples of HPDLC with and without peppermint oil respectively using a Nd:YAG laser tuned at 532 nm. The adulterant is detected due to the differences obtained for the maximum diffraction efficiency, which are related to the purity of the oil.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Integrating Light Sheet Microscopy and Multispectral Imaging for the Analysis of Autofluorescent Tissues

  • Fernandez, Roberto
  • Bentahar, Sara
  • Bravo Francés, Juan Carlos
  • Desco, Manuel
  • Ripoll, Jorge
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
In this work, we present a method for analyzing the autofluorescence signal of an ex-vivo sample, obtained using a custom-made light-sheet microscope system capable of acquiring multispectral images thanks to a tunable filter. Once acquired, Principal Component Analysis (PCA) was employed for spectral unmixing of the captured images since no fluorescent markers are present in the sample.. This tool enables the determination of principal components (PCs) without prior knowledge of spectra. Thus, the extracted PCs can be associated with various specific tissues of the analyzed sample. This method represents a preliminary step toward establishing a non-invasive and label-free tissue characterization approach for both ex-vivo and in-vivo samples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffraction efficiency in reflection holograms stored in photopolymers doped with metallic nanoparticles

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Sirvent-Verdú, Joan Josep
  • Solla-Gullón, José
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the last few years, the interest in storing volume holograms in photopolymers has increased enormously due to their applications in industry, the medical field, security, or renewal energy among others. The production of environmentally compatible photopolymers is one of the main focuses of Holography research. In this work, we have studied how to increase the diffraction efficiency of reflection holograms stored in a low-toxicity PVA-based photopolymer called Biophotopol. The holographic material has been doped with different types of nanoparticles (NPs) to achieve an increase in the refractive index modulation during the recording stage. Metallic NPs, obtained by physical and electrochemical methods have been used. The results obtained with all of them have been compared as a function of the concentration used, the size of the NPs, and the stabilization method used for their synthesis. A considerable increase in diffraction efficiency has been achieved by using NPs in the low-toxicity material. By using high refractive index NPs, the average refractive index of the holographic material increases and consequently the diffraction efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multispectral imaging for characterizing autofluorescent tissues

  • Bentahar, Sara
  • Gómez-Gaviro, María Victoria
  • Desco, Manuel
  • Ripoll, Jorge
  • Fernandez, Roberto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
Selective Plane Illumination Microscopy (SPIM) has become an emerging technology since its first application for 3D in-vivo imaging of the development of a living organism. An extensive number of works have been published, improving both the speed of acquisition and the resolution of the systems. Furthermore, multispectral imaging allows the effective separation of overlapping signals associated with different fluorophores from the spectrum over the whole field-of-view of the analyzed sample. To eliminate the need of using fluorescent dyes, this technique can also be applied to autofluorescence imaging. However, the effective separation of the overlapped spectra in autofluorescence imaging necessitates the use of mathematical tools. In this work, we explore the application of a method based on Principal Component Analysis (PCA) that enables tissue characterization upon spectral autofluorescence data without the use of fluorophores. Thus, enabling the separation of different tissue types in fixed and living samples with no need of staining techniques. Two procedures are described for acquiring spectral data, including a single excitation based method and a multi-excitation scanning approach. In both cases, we demonstrate the effective separation of various tissue types based on their unique autofluorescence spectra.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

General application of the genetic algorithm to the estimation of the Liquid Crystal Director in PA-LC devices

  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Lloret, Tomás
  • Nieto-Rodríguez, Belén
  • Neipp, Cristian
  • Beléndez, Augusto
  • Francés, Jorge
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The study of liquid crystal (LC) director distribution is an important area of research in materials science and technology. Parallel-aligned liquid crystal (PA-LC) devices have been extensively studied due to their applications in liquid crystal displays, optical devices, and sensors. Estimating the LC director distribution is a critical step in designing and optimising PA-LC devices. This work shows the results derived from apply- ing novel optimisation techniques to estimate the liquid crystal (LC) director distribution in parallel-aligned liquid crystal (PA-LC) devices. Moreover, the genetic algorithm (GA) has been applied and compared with the minimisation of the Frank-Oseen free energy through the Euler-Lagrange equations. The GA is a stochastic optimisation technique that can effectively explore the search space and find the global optimum. Overall, this study’s results demonstrate the GA’s effectiveness in estimating the LC director distribution in PA-LC devices. This approach can improve the performance and design of liquid crystal displays, optical devices, and sensors. Furthermore, it can be extended to other fields where the optimisation of complex systems is required. Further research is needed to optimise the GA parameters and to explore its potential in other applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-frequency processing effects on three commercial polymers with different thermal properties under femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Puerto, Daniel
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The response of three of the most used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under irradiation with high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser at λ=515 (1.34 J/cm2) and 1030 (1.70 J/cm2) is reported. Thermal and ablative effects are observed after laser irradiations. The results are compared to a photothermal model that pretends to explain the heat accumulation effect of successive pulses irradiation. Thermal analyses (Modulated Differential Scanning Calorimetry (MDSC) and Thermogravimetry (TG)) are performed and utilized to explain the different behaviour of each polymer. Three different regimes (non-thermal, thermal and saturation) are identified and explained from the model and experimental results. A connection between ablation depth and simulated reached temperature is established. Further studies as micro-Raman analyses on the irradiated area and the dependence of damaged area on the repetition rate are being performed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Full control of arbitrary linearly polarized structured light wavefronts using PA-LCoS devices

  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel-Aligned Liquid Crystal on Silicon (PA-LCoS) Spatial Light Modulators (SLMs) are highly adaptable devices capable of dynamically generating different beams through precise phase and polarization modulation. Within the various types of beams that can be produced with these devices, linearly polarized structured polarization beams offer unique properties that are advantageous for applications in fields such as microscopy, photoalignment, optical trapping, and communications. Generating purely linearly polarized structured beams is very challenging and requires a good characterization of the PA-LCoS. In this study, we apply Stokes polarimetric techniques twice: first to characterize the 2D retardance, and second to verify the fidelity of the generated structured light. We validate our approach by evaluating and compensating for spatial inhomogeneities for uniform wavefronts. Then, a wide variety of linearly polarized structured light beams are generated and metrologically evaluated to learn the uncertainty expected as a function of the complexity of the design. This approach not only enhances the stability and uniformity of the output beams but also broadens the potential for PA-LCoS SLMs in advanced optical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ray tracing for holographic waveguides: image quality prediction in see-through systems

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Francés, Jorge
  • Neipp, Cristian
  • Márquez, Andrés
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We present a sequential ray tracing tool, HoloTraceX, to evaluate, prior to experimental recording, the image quality of see-through waveguides formed by a glass substrate and two coupling/decoupling holograms. The model incorporates exact geometry, refractions and reflections with Fresnel coefficients, and volume holography using Kogelnik coupled wave theory to estimate ray efficiency. Wavefront maps and image metrics are calculated along the guided propagation, including chromatic dispersion and angular tolerances. Wavelength and angle scanning allows regions of high efficiency and low aberration to be identified, optimising the design of the couplers and the exit pupil. The results demonstrate that this preliminary analysis would optimise the holographic recording geared towards the optical architecture of see-through AR systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

CCD and Hartmann-Shack wavefront sensor to analyse holographic lens resolution

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Márquez, Andrés
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, the study and optimization of volume holographic lenses (HLs) stored in low-toxicity photopolymers have a great interest. HLs are now a component of optical imaging systems that are mostly used in head-mounted displays for virtual and augmented reality or as non-image systems in light deflectors and concentrators. One of the most important parameters used when working with imaging systems is the resolution of the optical system. In this work, the similarity between the object and image of negative asymmetrical HLs stored in a low-toxicity photopolymer named Biophotopol has been evaluated theoretically and experimentally. For this purpose, the resolution of the HLs was calculated using the Convolution Theorem. A USAF 1951 test was used as an object and the impulse responses of the HLs were obtained with two different sensors: CCD and Hartmann-Shack (HS) wavefront sensor. In addition, the resolution of the HLs has been obtained by two different methods: one using the Convolution Theorem, using both the CCD and the HS wavefront sensor, and the other by forming the USAF test image on the CCD sensor. Finally, a theoretical study of object-image similarity was carried out using the MSE (mean squared error) metric to evaluate the quantitative experimental results.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of characteristic parameters of holographic volume gratings based on machine learning

  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Bernabeu, Andrés P.
  • Alvarez, Mariela L.
  • Francés, Jorge
  • Neipp, Cristian
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
Estimating the actual parameters of real holographic volume gratings from diffraction efficiency measurements is challenging. The natural formation of the grating provides different phenomena, such as shrinkage, bending of the fringes, or non-homogeneous modulation as a function of the thickness, amongst other issues. This work proposes a deep learning Convolutional Neural Networks (CNNs) and Feedforward Neural Networks (FNNs) hybrid architecture capable of predicting the grating parameters from theoretical and experimental diffraction efficiency patterns. For the training set of this regression problem, Kogelnik’s Coupled Wave Theory simulated data has been employed. Our best model has been trained with an 8000-sized dataset of 80 points of diffraction efficiency patterns simulated from a range of values for the normalized grating wavelengths, index modulations, and optical depths. It achieves test losses under one per cent (mean absolute error) for predicting the normalized grating wavelengths, index modulations and optical depths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ablation cooling and thermal regimes in high repetition rate ultrafast laser processing of commercial polymers

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Ultrafast laser processing of polymers is strongly influenced by the repetition rate of the irradiation, which determines the balance between heat accumulation and material removal mechanisms. In this work, we investigate the response of a commercial polymer, poly(ethylene terephthalate) (PET), under femtosecond laser irradiation at two different repetition rates: 1 kHz and 60 kHz. Experiments were performed at a wavelength of 1030 nm with 220 fs pulses and a pulse energy of 88 μJ using a beam radius of approximately 118 μm. The results reveal clear differences in the morphology of the induced structures between the two irradiation regimes. At 1 kHz, extended thermal halos surrounding the ablation crater are observed, associated with local temperature rise above the glass transition threshold. When the repetition rate is increased to 60 kHz, the ablation volumes become significantly larger while the surrounding thermal halos are reduced. These results indicate that higher repetition rates promote more effective material removal while limiting the extent of the thermally affected regions. This behavior suggests that efficient ablation can act as a heat dissipation mechanism, consistent with the hypothesis of ablation cooling in ultrafast laser processing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Stability analysis of symmetric holographic transmission gratings stored in photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The development of advanced holographic materials is a constantly evolving field of research, driven by the need to adapt their optical properties to the specific demands of photonic devices. In particular, photohydrogels emerge as promising materials for applications in liquid media because of their ability to maintain structural integrity under high-humidity conditions. This work focuses on evaluating the structural stability of unslanted transmission volume phase holograms stored in photohydrogels based of acrylamide and N,N′-methylenebis(acrylamide). The influence of radiant exposure on diffraction efficiency has been analyzed on holographic gratings stored at two different spatial frequencies. For this purpose, a theoretical model based on the theories of Kogelnik, Kubota and Uchida has been used, considering the influence of bending and attenuation of holographic gratings in depth. This approach allows us to understand how these deformations affect the diffraction efficiency and the internal structure. This can provide key information for the design of devices in which holograms stored in photohydrogels are used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimización del proceso de escritura de redes de difracción en PVA/AA con láser de femtosegundos de alta frecuencia

  • Ortuño, Manuel
  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
En este trabajo se estudia la modulación del índice de refracción y las eficiencias de difracción en redes fotopolimerizadas basadas en PVA/AA con reticulante BMA bajo irradiación láser multipulso de femtosegundo (450 fs) a altas frecuencias de repetición (1 kHz-1 MHz) λ=515 nm (12.6 mJ/cm2). La red se escribe mediante un escáner que controla la posición X-Y del haz láser sobre el material procesado con resolución micrométrica y velocidades entre 1 mm/s y 5 m/s. El escáner también contiene una lente f-theta para focalizar el haz, lo que da lugar a un radio de 9 μm a 1/e2 para 515 nm. Esto permite producir redes con periodos de hasta 10 μm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Low-toxicity photopolymer biophotopol optimization to record wavelength-shifted holographic couplers

  • Sirvent-Verdú, Joan Josep
  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Fernández, J.
  • Mora, Manuel
  • García-Vázquez, José Carlos
  • Márquez, Andrés
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work, we present our results regarding holographic transmission gratings recorded in Biophotopol. An adaptation of the material base composition was needed to produce such holographic couplers without using prisms by recording with wavelength-shifted geometries. Changing the dye’s quantity in the prepolymer solution led to observe the coupling of the recording light, while the crosslinker’s and nanoparticle inclusion produced gratings with higher diffraction efficiency for the intended operating wavelength. By measuring the Bragg angle as a function of the playback wavelength, we can inspect the post-processing deviations for different variations of the base composition. Thus, with this research, we aim to provide experimental evidence and a characterization of these effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Storage optimization of transmission volume holograms in hydrogel matrix

  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Zezza, Paola
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Emerging applications such as holographic sensing [1] require the storage of time-stable volume holographic gratings while the material is immersed in a liquid medium. For this purpose, hydrogels can be used as matrices for the introduction of the necessary components for the hologram formation. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes due to their high swelling capacity. Their liquid permeable structure allows the diffusion of molecules inside their matrix. Unslanted transmission volume phase holographic gratings (TVPHG) with a period of 0.830 μm have been stored in hydrogels based on acrylamide (AAm) and N,N’-methylenebis(acrylamide) (MBA). For this, solutions containing monomer (AAm), crosslinker (MBA) and photoinitiator system (triethanolamine (TEA) and yellowish eosin (YE)) in DMSO:H2O were deposited onto the hydrogel matrices and then exposed with a laser of wavelength 532 nm. TVPHG need to be washed to eliminate the components that do not react during the recording process. With the main objective of optimizing this washing with PBST (phosphate-buffered saline with Tween 20), high-performance liquid chromatography (HPLC) and UV-visible measurements have been employed to analyze the composition of the washing solutions. The recorded holograms were reconstructed using a laser of wavelength 633 nm immediately after the recording process and after each washing stage to obtain the diffraction efficiency (ratio between the intensities of diffracted and incident beams).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fundamental tools in the design of hololens-based optical devices

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Today, holography-based photonic devices are becoming increasingly important in many fields of application. Holographic lenses (HL) work by diffraction and can replace the behavior of conventional refractive lenses, which are much more expensive. These lenses have spectral and angular dependence, which makes them particularly interesting. Probably the best known traditional application is their use as holographic solar concentrators in photovoltaics. In this work holographic lenses have been recorded into a novel photopolymer with low toxicity properties called Biophotopol. Photopolymer concentrations have been optimized. Fundamental parameters such as shrinkage and swelling have been modeled. For this purpose, the bending phenomenon has been studied by fitting theoretical models. Furthermore, their application as holographic solar concentrators has been evaluated and the theoretical and experimental concentration ratio (CR) has been calculated. Finally, the holographic concentrators have also been analyzed under white light conditions using a solar simulator and acceptance angles have been obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Platinum nanoparticles effects in hologram's formation processes in a low-toxicity photopolymer material

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bravo Francés, Juan Carlos
  • Fernandez, Roberto
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we present a study related to photopolymerization dynamics in a nanocomposite material. Our experimental results reveal a significant impact on the real-time hologram formation dynamics when platinum (Pt) nanoparticles (NPs) are incorporated into the low-toxicity Biophotopol. By recording symmetrical gratings with a recording wavelength of 532 nm and using a 633 nm source at the corresponding Bragg condition, wavelength to which this material is not sensitive, it has been proved that NP diffusion mechanisms continue to happen even after the light exposure has been stopped. Thanks to this experimental data, we test different hypotheses regarding the different diffusion timescales, which has a variety of applications in the development of novel and high-refractive index modulation materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lens Resolution Using the Convolution Theorem

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The similarity between object and image of negative asymmetrical holographic lenses (HLs) stored in a low-toxicity photopolymer has been evaluated theoretically and experimentally. Asymmetrical experimental setups with negative focal lengths have been used to obtain HLs. For this purpose, the resolution of the HLs was calculated using the convolution theorem. A USAF 1951 test was used as an object and the impulse responses of the HLs, which in this case was the amplitude spread function (ASF), were obtained with two different methods: using a CCD sensor and a Hartmann Shack (HS) wavefront sensor. For a negative asymmetrically recorded HL a maximum resolution of 11.31 lp/mm was obtained. It was evaluated at 473 nm wavelength. A theoretical study of object-image similarity had carried out using the MSE (mean squared error) metric to evaluate the experimental results obtained quantitatively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Green's method for solving the Helmholtz scalar equation with applications to refractive index media

  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Francés, Jorge
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
In this work, we present a formalism based on scalar Green’s functions to deal with electro-magnetic scattering problems. Although the formulations of the Mie theory and Born approximations in terms of electromagnetic scattering are well known and relevant, they have certain disadvantages; complexity, computational time, few symmetries, etc. Therefore, the study with scalar Green functions allows one to deal with these problems with greater simplicity and efficiency. However, the information provided by the vector formulation is sacrificed. Nevertheless, different cases of electromagnetic scattering of dielectric media with different dimensions, geometries, and refractive indices will be presented. Thus, we will be able to verify the capacity of this scalar method to predict light scattering problems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage studies and optimization of multiplexed holographic lenses with high diffractive efficiency and wide angular response

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Today, the advancement of optical systems that can harness clean and renewable energy sources is a major focus for researchers and innovators worldwide. As we strive to create a sustainable future, this challenge has become increasingly critical to our success. Fresnel lenses are widely used as traditional concentrators, but they have a small acceptance angle, and the reflective elements need continuous maintenance of the surface reflectivity. Transmitting Holographic Optical Elements (HOEs) are an alternative to conventional lenses because they are more economical and versatile. Their material is usually a flexible photopolymer so that the optical element can be attached to different types of support, depending on whether one type of handling is required or another, and they tend to have low weight and volume, as well as a simple way of manufacturing. In addition, also provide an extended focusing area which helps to protect solar cells from heating damage. A theoretical and experimental study on the shrinkage of multiplexed holographic lenses (MHL) that were stored in a low-toxicity photopolymer was carried out. To accomplish the study, a K-space tool was used. Furthermore, an optimization analysis of the angular distance between peaks was performed. To determine efficiency, an evaluation of the short-circuit current under solar illumination with varying incident reconstruction angles was done.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modelling photopolymer behavior as optical recording medium

  • Gallego, Sergi
  • Neipp, Cristian
  • Fernandez, Roberto
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Bernabeu, Andrés P.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Since photopolymers were first used as a holographic recording medium in the 1970s, one of the most important goals to be achieved was a quantitative understanding of their behaviour. In general, photopolymers are composed of one or more monomers, a binder and a dye that absorbs light in a certain region of the spectrum. The absorbed photons initiate polymerisation in the bright regions creating a concentration gradient compensated by the diffusion of chemical molecules described by Fick’s law. The first models to simulate the etching process in this type of materials were proposed in the early 1990s; they were very simple models where the authors assumed a harmonic in the monomer concentration, a constant rate of polymerisation and diffusion without direct influence of the refractive index of the monomer and the polymer. From this point on, improvements started to be made in the so-called “diffusion models”. One of the most important breakthroughs, proposed by John Sheridan’s research group in 2000, is the non-local behaviour of the photopolymer due to the finite size of the polymer chains. This phenomenon affects the limit of holographic recording resolution. Our research group at the University of Alicante (Spain) had the honour to collaborate with John Sheridan’s group developing new advances in the modelling of photopolymers as an optical recording medium, such as the threedimensional expansion of the models, and the explanation of surface variations or models to explain the recording of diffractive optical elements in this type of materials. In this papSer, we review this collaboration to improve diffusion models applied to photopolymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modification of the hygroscopic properties of a low-toxicity photopolymer

  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Lloret, Tomás
  • Sirvent-Verdú, Joan Josep
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
The optimization of water-soluble, acrylate-based and low-toxicity holographic photopolymer (Biophotopol) functionalized with MPC (2-methacryloyloxyethyl phosphorylcholine) for holographic humidity sensing applications was researched. By adjusting the concentrations of triethanolamine (TEA) and MPC the material hygroscopic properties were tuned to enhance its response to environmental humidity variations. Experimental results demonstrated that higher MPC concentrations significantly increased Bragg wavelength redshift. These findings suggest that MPC-functionalized Biophotopol can be a promising candidate for advanced holographic sensors, offering enhanced sensitivity and real-time response capabilities for humidity monitoring in various applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Green Scalar Function Method for Analyzing Dielectric Media

  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Sirvent-Verdú, Joan Josep
  • Mena Ortiz, Emilio José
  • Alvarez, Mariela L.
  • Francés, Jorge
  • Neipp, Cristian
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work we present a formalism based on scalar Green’s functions to deal with electromagnetic scattering problems. Although the formulations of the Mie theory and Born approximations in terms of electromagnetic scattering are well known and relevant, they have certain disadvantages: complexity, computational time, few symmetries, etc. Therefore, the study with scalar Green’s functions allows dealing with these problems with greater simplicity and efficiency. However, the information provided by the vector formulation is sacrificed. Nevertheless, different cases of electromagnetic scattering of dielectric media with different dimensions, geometries and refractive indices will be presented. Thus, we will be able to verify the capacity of this scalar method in predicting light-scattering problems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lenses for See-Through Applications Recorded Without Prisms

  • Sirvent-Verdú, Joan Josep
  • Lloret, Tomás
  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Márquez, Andrés
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography offers a wide range of solutions for see-through display applications, where holographic optical elements can act either as mirrors or as waveguide couplers. In the latter case, one of the main challenges lies in achieving efficient mass fabrication. To address this limitation, the use of wavelength shift recording has been proposed, as it eliminates the need for prisms and index matching during the recording process. These elements are typically designed as slanted holographic gratings, recorded using either transmission or reflection geometries. Photopolymers as holographic recording materials are a promising solution for such applications because of their attractive optical properties. However, their inherent volume changes affect the optical performance of the recorded elements. In this paper, we propose the use of holographic lenses as wave couplers, which enables control over additional parameters such as magnification and optical aberrations. We analyze the limitations of this recording approach when prisms are not employed, and we investigate the influence of photopolymer shrinkage on hologram quality, comparing lenses recorded using transmission and reflection holography with different focal lengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: More than three-dimensional images

  • Beléndez, Augusto
  • Gallego, Sergi
  • Márquez, Andrés
  • Ortuño, Manuel
  • Francés, Jorge
  • Colomina-Martínez, Jaume
  • Nájar, Guillem
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography is a broad field of research that interacts with a wide range of disciplines, from physics and chemistry to art through engineering, as shown by the large number of publications that can be found on the subject. Holography is integrated into our daily lives, often associated with the rainbow-like effect on banknotes, credit cards, and ID cards. Let us also consider that holography involves many optical phenomena (coherence, diffraction, interference, analogue and digital recording devices, lasers, materials, etc.). Therefore, holography is an extraordinarily productive and attractive field as a research area. Furthermore, holographic devices facilitate the development of many applications, some of which are reviewed in the present paper.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Liquid Crystal on Silicon devices characterization and applications

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, Phase-only spatial light modulators (SLMs) are widespread in a wide range of fields, from Diffractive Optical Elements to optical tweezers, wavefront coding or optical vortex among others. For this reason, we need a complete characterization of their performance, we have to take into account that apart from the phase retardance introduced, the device presents a certain level of fluctuations or flicker that from our point of view has to be measured. In the first place we have developed and extended version of the classic linear polarimeter. This method uses two intensity measurements to obtain a robust value for the retardance introduced by a waveplate, in our case the waveplate will be the Parallel Aligned LCOS (PA-LCoS) used as a SLM. Our extended version modelized the flicker presented because of the digital addressing scheme and allow us to correct the measurements and evaluate the flicker for certain retardance values. Following the same model for the flicker and by using a Stokes polarimeter we demonstrated that we can obtain the retardance introduced and the flicker for the complete range of the display gray levels.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Noise gratings in holographic waveguides recorded in photopolymers

  • Bravo Francés, Juan Carlos
  • Neipp, Cristian
  • Sirvent-Verdú, Joan Josep
  • Colomina-Martínez, Jaume
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
It is a fact that augmented reality or virtual reality has burst into society with force: allowing the creation of programmed video games to be played with virtual reality glasses or the manufacture of glasses that act as mobile devices connected to the Internet ("Google glasses"). Augmented reality devices generally consist of a headset and a display system to show the user virtual information in addition to the real one. The systems used are the transparent optical screen and the mixed video screen. In this way, virtual images can be used that are shown to the user, mixed with reality or projected directly on the screen. On the other hand, the "glasses" have some advantages in relation to a direct viewing mobile screen, for example, hands-free and high privacy character. Among the different models of glasses proposed, transparent glasses are especially important for mobile use because they are safer and easier for the public to accept. However, combining high-quality images with clear visibility throughout the system remains a challenge. In this work, holographic waveguides will be manufactured in photopolymers and the experimental results will be contrasted with the numerical simulations carried out using the RCW models. An important fact that must be taken into account in the recording of the holographic waveguide is the possible recording of noise reflection gratings. In general, noise gratings in other devices extract a small amount of energy from the diffracted order, without any other spurious effects. However, in this particular device it will be shown that noise reflection gratings could create an unwanted afterimage. Since the reconstruction is performed at a different wavelength than the recording, the reflection noise grating may or may not be "visible" during the reconstruction, so it is possible to control the appearance of the gratings, for example, by controlling the thickness of the final waveguide. The gratings to performed the study were recorded using an HPDLC photopolymer as recording medium. To understand the capabilities of this material for this particular application, inclined transmission holographic gratings with spatial frequencies of 1690 lines/mm were recorded and analysed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage effects in holographic couplers for see-through applications recorded in photopolymers

  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Piñol Galera, Carla
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The see-through application of holographic optical elements (HOEs) has gained a lot of attention in the scientific literature in recent years. Regarding this kind of holograms recorded in photopolymers, the shrinkage plays an important role in the final properties of the display, as it may alter the Bragg angle. The present work is focused on the characterization of a HOE as a coupler in a waveguide combiner, recorded in holographic transmission geometry without prisms in the experimental set-up. From this point of view, it has been found that for specific geometries where the diffracted beam cannot be trapped a priori, a significant coupling effect exists: this variation in the diffracted energy and the propagation angle inside the glass can be used to measure the shrinkage of the photopolymer for this HOEs recording.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The role of absorption mechanism on the optimization of processing commercial polymers under high repetition rate femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Puerto, Daniel
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The response of three of the most used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under irradiation with high repetition rate (1 kHz–1 MHz) femtosecond (450 fs) multi-pulse (N = 10–1500) laser at λ = 343 nm, 515 nm (1.40 J/cm2 for both former wavelengths) and 1030 nm (1.70 J/cm2) is reported, obtaining a study on how the absorption mechanism influences the processing efficiency for these materials. Tunable ablation depth and diameters are accomplished by modifying repetition rates at a constant fluence and number of pulses. The results highlight the role of absorption mechanism, repetition rate ranges and thermal properties of the materials for benefiting ablation efficiency. Furthermore, the use of high repetition rates improves the laser processing, reducing extended thermal effects and increasing ablation uniformity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric Approach for Liquid Crystal Spatial Light Modulators Applications

  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Nájar, Guillem
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We focus on the application of polarimetric approaches for the characterization and the modelling of liquid crystal spatial light modulators, since they can fully exploit the inherent birefringent properties of such devices. In this work we cover the full breadth of possibilities: from the basic understanding of the 3D liquid crystal alignment, via rigorous numerical simulations, to the precise radiometric and polarimetric measurements of periodic structures, the 2D mapping of the properties for polarization and phase applications, and to the generation of polarized structured beams. Theory, experiment and simulation are combined consistently.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D tracking algorithm for Neocaridina Davidi in a dual camera system

  • Fernandez, Roberto
  • Álvarez, Diego
  • Moscoso, Miguel
  • Ripoll, Jorge
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
Animal testing has faced increasing restrictions due to ethical concerns, driving the search for alternative models aligned with the 3Rs principle (Replacement, Reduction, and Refinement). Invertebrates offer a promising alternative, yet their behavior remains largely unexplored. Among them, Neocaridina davidi is a promising individual due to its small size, transparency, ease of maintenance, and rapid reproduction, making it suitable for behavioral and biomedical studies. This work presents a 3D tracking system for N. davidi in a simulated wild-type environment, using a dual-camera setup and a 3D Object Tracking Algorithm. To evaluate the algorithm, synthetic data were generated, simulating shrimp movement as recorded by the camera system. This approach enables assessing the algorithm’s ability to extract locomotion dynamics, inter-individual interactions, and environmental responses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Connecting the microscopic depolarizing origin of samples with macroscopic measures of the Indices of Polarimetric Purity

  • Canabal-Carbia, Mónica
  • Estévez, Irene
  • Nabadda, Esther
  • Garcia-Caurel, Enrique
  • Gil, J.J.
  • Ossikovski, Razvigor
  • Márquez, Andrés
  • Moreno Soriano, Ignacio
  • Campos, Juan
  • Lizana Tutusaus, Ángel
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
In this work we show how a specific set of three depolarizing observables, the Indices of Polarimetric Purity (IPP), P1, P2 and P3, are ideal metrics to study the depolarization characteristic of media. We simulate different depolarizing scenarios, based on different depolarizing origins, and we study the corresponding IPP values. The simulations are based on the incoherent addition of multiple elemental polarizing elements, as ideal polarizers and/or retarders with different specific characteristics (orientation, retardance, transmittance, etc.). Further depolarizing scenarios are also studied by including the effect of ideal depolarizers. We show for the first time how by analyzing depolarizing systems through IPP we unravel two different depolarizing origins: isotropic and anisotropic depolarization, with meaningful physical interpretation. The former, isotropic depolarization is related to pure scattering processes, and mainly connected with P3 observable. The later, anisotropic depolarization is originated by microscopic constituent elements showing polarimetric anisotropy (dichroic and/or birefringent elements with different characteristics) and anisotropic scattering produced by these elements, and mainly described by P1 and P2 observables. Both effects can be simultaneously observed in real samples and give us information of the processes that give rise to depolarization in light-matter interactions. The simulated results are experimentally validated by analyzing the depolarizing behavior, in terms of IPP, of diverse real samples with easy physical interpretation, and direct connection with simulations. The present study could be of interest in multiple scenarios, to further understand the depolarizing response of samples, and it can be of special interest for the study of biological tissues and pathologies, as they present important depolarizing behavior.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlled photothermal ablative processing of commercial polymers minimizing undesired thermal effects under high frequency femtosecond laser irradiation

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Ramirez, Manuel G.
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
The response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under high repetition rates (1 kHz-1 MHz) with femtosecond (450 fs) multi-pulse laser irradiation at λ = 515 nm (1.4 J/cm2) is reported resulting in a complete study with controlling the ablation depth and minimizing collateral thermal effects. Tunable ablation depth is achieved accurately by varying the repetition rate at a constant fluence. The results are compared to a photothermal model that aims at explaining the heat accumulation effect of successive pulses as a function of the repetition rate and predicts three different heat regimes (non-cumulative, cumulative and saturation). The threshold frequencies for each regime can be estimated from the model, providing control for selecting frequency values and thermal regimes. Thermal analyses are performed to characterize the materials, concluding that thermal parameters are vital for selecting optimal materials and laser processing parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fabrication and characterization of liquid crystal cells based on azo dye photoalignment

  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Ortuño, Manuel
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
In this research, liquid crystal cells with photoalignment were fabricated and characterized using the commercial azo dyes Brilliant Yellow (BY) and Methyl Red (MR) in combination with the commercial liquid crystal E7. The primary objective was to develop a device that works as a Liquid Crystal Variable Retarder (LCVR) and to study the influence off certain parameters in the performance of the device. These studies are a crucial step for our future research.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of processing effects under high-frequency femtosecond laser irradiation on three commercial polymers with different thermal properties

  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Colomina-Martínez, Jaume
  • Gallego, Sergi
  • Puerto, Daniel
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The behavior of three commonly used commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high repetition rate (10 kHz – 1 MHz) femtosecond (450 fs) laser irradiation at λ=515 nm (1.40 J/cm2) is analysed. A study of how repetition rate affects the heat accumulation effects and the processing outcomes on the surface of these polymers is presented, demonstrating a tailored modulation of ablation depth and modified widths through repetition rate variations at constant values of fluence and number of pulses. Micro Raman analyses are conducted to investigate the induced thermal degradation in the surroundings of the ablated regions for processing at different values of repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of the recording of Fibonacci lenses on photopolymers with 3-D diffusion model

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bernabeu, Andrés P.
  • Colomina-Martínez, Jaume
  • Fernandez, Roberto
  • Márquez, Andrés
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In this work a three-dimensional diffusion model is used to model photopolymers as a recording media. This model allows us to predict the properties of the Diffractive Optical Elements (DOEs) once we recorded into the photopolymer. This model had never been tested with more complex elements, such as multifocal diffractive lenses, as presented in the following in this work. In addition, the model includes; the estimation of the refractive index modulation, the low-pass filtering effect due to the experimental optical setup, and the evolution of the transverse intensity distribution. In this way, the selection of the appropriate material characteristics depending on the intended DOE application is made possible. Specifically, an acrylamide-based PVA/AA photopolymer is simulated using the proposed model. Moreover, coverplating and index matching systems are considered together to avoid the effects of thickness variation. Furthermore, in order to compare their properties using the proposed model, we focus on Fibonacci lenses (FL), a type of bifocal lenses. This allows us to evaluate the dependence of the focii intensity on the polymerisation rate, the diffusivity parameter, low-pass filtering effect and the use of the index matching system for these lenses. This enables us to know the recording parameters in order to produce this type of multifocal diffractive lenses with higher quality and precision.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photothermal Processing of Commercial Polymers under High Frequencies Femtosecond Laser Irradiation

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Ramirez, Manuel G.
  • Nájar, Guillem
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymer (Polyvinyl chloride-PVC, Polyethylene terephthalate-PET, and Polypropylene-PP) under irradiation with high frequency (until 1 MHz) femtosecond (450 fs) multi-pulse (N = 30−100) laser at λ nm= 515 (2.9 J/cm2 ) and 1030 nm (2.9 J/cm2 ). Different series of straight lines are made on the surface of these polymers at irradiation conditions not studied before, observing different thermal and ablative behaviours between them.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-frequency photothermal processing of commercial polymers under femtosecond laser irradiation for waveguide writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Martínez Guardiola, Francisco Javier
  • Nájar, Guillem
  • Ruiz Navarro, Alberto
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The processing of three commonly used commercial polymer films (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) with different thermal properties under femtosecond (450 fs) irradiations at high frequency (1 kHz-1 MHz) multi-pulse (N=10-18000) laser at λ=515 (1.34 J/cm2, radius 9 μm) is analysed in order to have knowledge of which material and laser conditions are more suitable to write waveguides. Thermal and ablative effects are observed after laser irradiations. Heat accumulation effects of successive pulses impinging are simulated through a photothermal model in order to explain the results of irradiating these materials. Thermal analyses (Modulated Differential Scanning Calorimetry (MDSC) and Thermogravimetry (TG)) are performed and used to explain the different behaviour of each polymer. Three different regimes (non-thermal, thermal and saturation) are identified and explained from the model and experimental results. A connection between ablation depth and simulated reached temperature is established. A study of which number of pulses/spot area and frequency are appropriate for a better shape and ablation depth for writing waveguides on these polymers is performed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polímeros derivados de fuentes renovables como soporte para fotopolimerización láser en capa sólida

  • Romo Ríos, Adrián Enrique
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
En este trabajo se estudia la utilización de polímeros derivados de fuentes naturales como por ejemplo los obtenidos a partir de celulosa. Se detallan sus principales características en relación con su uso como polímero soporte en fotopolimerización en capa sólida. Un láser de estado sólido permite realizar la reacción de polimerización de forma controlada y se utiliza un sistema óptico holográfico para el seguimiento de la reacción en tiempo real. Se evalúan los parámetros: longitud de onda, intensidad de luz y energía necesaria.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Experimental study of PVA/AA photopolymers by means of pulsed laser exposure

  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work explores the use of a coherent nanosecond pulsed laser in holography with an acrylamide-based photopolymer (PVA/AA) material. By optimizing the photopolymer's composition, comparable results were achieved by adjusting the dye concentration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of the recording of multifocal lenses in photopolymers for intraocular applications

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Colomina-Martínez, Jaume
  • Fernandez, Roberto
  • Márquez, Andrés
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
The introduction of a mathematical sequence into a diffractive lens phase, such as the Fibonacci or Silver Mean Sequence, allows us to achieve multifocal behavior in the Fresnel regime. This study explores the use of photopolymers based on Polyvinyl Alcohol Acrylamide (PVA/AA) as an optical recording medium for these complex lenses. PVA/AA photopolymers were selected because of their versatility and good response in recording DOEs. Moreover, the use of a 4F optical system configuration and a Spatial Light Modulator (SLM) provides the flexibility to adjust lens radius and orders, enabling the creation of lenses with adaptable focal lengths and specific sizes. In addition, we model the material’s behavior using a 3D diffusion model with a coverplate and index matching, allow us to adjust some parameters to obtain higher diffraction efficiency. These lenses find practical applications in microscopy and ophthalmology, particularly as progressive intraocular lenses. Their ability to adjust focal points and sizes makes them invaluable for addressing vision problems, like presbyopia and enhancing optical devices used in medical and research settings.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic photopolymers applied to biosensing and efficient energy

  • Pascual, Inmaculada
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • Berramdane, Kheloud
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic photopolymers can be used for two breakthrough applications, biosensing, and efficient energy. Related to biosensing a real challenge is to store time-stable holographic gratings in hydrogel matrices immersed in aqueous media. The storage of unslanted transmission holograms in hydrogels is the main objective of this work. The optimization of the washing steps using PBST and DMSO:H2O as solvents has been studied. Obtaining an adaptable holographic element to concentrate the sunlight avoiding the need for expensive tracking systems is the another goal of this study. The efficient energy study consists in recording a multiplexed holographic lens with low frequency (545 lines/mm) in a low-toxicity photopolymer to focus the sunlight from sunrise to sunset. The efficiency has been evaluated by measuring the short circuit current (Isc) at different incident angles under solar illumination and we obtained wide acceptance angle systems. This study reaches the trade-off between a high incident acceptance angle and good efficiency.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding the degrees of freedom of wavefront modulation by liquid crystal on silicon microdisplay with a digital backplane

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Bravo Francés, Juan Carlos
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Beléndez, Augusto
  • Márquez, Andrés
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Digital backplane liquid crystal on silicon devices (LCoS) are widely used in wavefront engineering applications due the maturity of the technology, thus the reliability of their performance. A thorough study of the relation between the different control parameters and their effect on the retardance modulation is lacking though. These control parameters, which are the low and high levels of the voltage signal together with the grey level addressed, in relation with the retardance modulation produced are explored across the whole visible spectrum. From a more practical point of view, this enables to decide which voltage parameters across the whole range of possibilities are the most appropriate for a certain wavefront engineering problem without the need to measure them in advance. Additionally, we are interested in the comparison of two different approaches developed in our research group to obtain the retardance modulation to see their possible pros and cons. The results presented are backed by the experimental measurements provided.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarization approach on the characterization and optimization of LCoS devices

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Márquez, Andrés
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Sirvent-Verdú, Joan Josep
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
This study explores the impact of voltage signal levels and grey level addressing on retardance modulation across the visible spectrum, aiming to determine optimal voltage parameters for specific wavefront and polarization requirements. We employed the Stokes polarimetry technique, consisting of illuminating a circularly polarized unexpanded beam of a supercontinuum laser (SuperK COMPACT, NKT Photonics) onto a commercial SLM display (PLUTO, HOLOEYE), treated for practical purposes as a linear retarder with 8 μm pixel size.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pantalla LCoS alineada verticalmente y uso de órdenes superiores en una red blazed

  • Nájar, Guillem
  • Martínez Guardiola, Francisco Javier
  • Bernabeu, Andrés P.
  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Gallego, Sergi
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
La modulación espacial de frentes de onda es una característica presente muchas aplicaciones diferentes en Óptica y Fotónica. Entre las diferentes opciones para dicha modulación, las pantallas de cristal líquido sobre silicio (LCoS) se han popularizado debido a su versatilidad, su eficiencia luminosa, alta resolución espacial y su capacidad de modulación sólo de fase. Sus propiedades han sido ampliamente estudiadas en la literatura y han demostrado ser de mucha utilidad en aplicaciones como la óptica adaptativa, las pantallas holográficas, o los multiplexores ópticos reconfigurables (ROADM), entre otras. En este artículo se analiza un dispositivo LCoS de alineamiento vertical (VA- LCoS) comercial de la firma SANTEC (modelo SLM-200). En primer lugar, realizamos una calibración completa de la pantalla para obtener el retardo introducido por la pantalla en función del nivel de gris mostrado en la pantalla. Una vez calibrada la pantalla para distintas longitudes de onda y configuraciones de la pantalla, se analizará la eficiencia en difracción de una serie de redes blazed centrándonos en su uso para elementos ópticos difractivos multiorden.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fabricación y caracterización de celdas de cristal líquido basadas en fotoalineado de colorantes azo

  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
En este trabajo de investigación se han fabricado y caracterizado celdas de cristal líquido con capas de fotoalineado basadas en los colorantes azo comerciales Brillian Yellow (BY) y Methyl Red (MR) con el cristal líquido comercial E7 con el objetivo de obtener una lámina retardadora, paso previo necesario para nuestras futuras investigaciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Full polarimetric evaluation of the anamorphic transfer function for pixelated liquid crystal microdisplays

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Calzado Estepa, Eva María
  • Neipp, Cristian
  • Gallego, Sergi
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Spatial Light Modulators (SLMs) employing phase-only modulation typically rely on parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplays, known for their high resolution and small pixel size. However, the performance of high-definition pixelated SLM devices is affected by various interpixel cross-talk degradation effects, that manifest differently depending on the orientation and the spatial frequency profile displayed on the microdisplay. This study explores, both experimentally and numerically, the anamorphic spatial frequency transfer function for pixelated PA-LCoS devices. In particular, we focus on the impact of high-frequency binary phase grating profiles with the grating vector parallel and perpendicular to the alignment direction defined by the alignment layer. Experiments are performed with a commercial PA-LCoS microdisplay with eight-micron size pixels. Novel full Stokes light analysis (polarimetric study) of the diffraction orders and diffraction efficiency measurements (radiometric study) provides a deep insight into the anisotropic phenomena involved, showing not only anamorphic degradation in the radiometric but also in the polarimetric performance and dependent on the applied voltage. Computed rigorous electromagnetic numerical results show a very good agreement with the experimental ones. The numerical computation is an essential tool since it enables the connection of the far-field evaluation with the microscopic level: the 3D distribution of the LC director and the near-field values of the illuminating electromagnetic field are known for each applied voltage onto the PA-LCoS microdisplay and show evidence for the anamorphic results in the far-field. Through this rigorous combined radiometric-polarimetric computing approach, we provide evidence of the impact of smaller pixel sizes in this SLM technology and for different fill-factors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Developing holographic couplers for see-through application without prisms

  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Mena Ortiz, Emilio José
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work we present an overview of our advances in the fabrication of holographic couplers for seethrough based on photopolymers, analyzing different aspects such as different geometries in transmission and reflection, different photopolymer compositions, shrinkage effects and noise gratings.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric-Based Analysis and Manufacturing of Dye-Doped Liquid Crystal Photoaligned Cells for the Visible Range

  • Moya Aliaga, Adrián
  • Sánchez-Montes, Adriana R.
  • Mena Ortiz, Emilio José
  • Ortuño, Manuel
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
The accurate and controlled alignment of liquid crystals (LCs) in modern optical devices is of great importance. Photoalignment is one of the most appealing approaches for achieving more versatile alignment in designs. One of the most important parameters of these devices is the thickness and the homogeneity in the photoaligned area, especially in devices that introduce retardance. In this work, we propose a novel polarimetric-based method for the measurement of thickness of homogeneous liquid crystal cells that considers diattenuation effects and how they affect the retardance generated by a liquid crystal variable retarder (LCVR). We experimentally demonstrate the production of dye-doped liquid crystal (DDLC) devices, photoaligned in the visible range with a 532 nm laser light, of two different thicknesses with a very high spatial homogeneity. Thinner devices can be used across the whole visible spectrum despite the residual diattenuation at shorter wavelengths, whereas thicker ones achieve the best degree of polarization (DOP) in the transmitted wavefronts, close to 100%, at longer wavelengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D FDTD analysis of cross-talk in pixelated PA-LCos devices: impact of fill factor and size pixel on S2 and S3 parameters

  • Francés, Jorge
  • Sánchez-Montes, Adriana R.
  • Márquez, Andrés
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the last decades, new technology fabrication developments have permitted increased resolution and reduced pixel size of Liquid crystal on silicon (LCoS) microdisplays. However, the pixel size reduction triggers the microdisplay performance degradation due to different phenomena, such as the cross-talk between neighbouring pixels, fringing fields, out-of-plane reorientation of the liquid crystal director, and diffraction effects due to the pixelated grid pattern of the microdisplay. In this work, a full 3D simulation model has been applied to predict the liquid crystal director orientation as a function of space and external voltage. The scheme here considered provides the complete vectorial information of the electromagnetic field distribution produced by one single pixel illuminated by plane waves circularly polarised. This analysis is carried on for several pixel and gap sizes for different external voltages. This research focuses on S2 and S3 Stokes parameters and how their behaviour is affected due to the cross-talk phenomena previously presented.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage study and optimization of multiplexed green holographic solar concentrators toward improved photovoltaic energy

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, the development of optical systems applied to the generation of clean and renewable energy is one of the great challenges of the 21st century. This work presents a theoretical and experimental study of shrinkage in multiplexed holographic lenses (MHL) stored in a low-toxicity photopolymer named Biophotopol. For this purpose, a study has been carried out using k-space tools. In addition, a study has been performed to optimize the number of MHLs, the hologram thickness, and the angular distance between peaks. To evaluate the efficiency, the short-circuit current has been evaluated under solar illumination with different incident reconstruction angles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization of holographic gratings in PVA/AA using coherent nanosecond laser exposure

  • Mena Ortiz, Emilio José
  • Bernabeu, Andrés P.
  • Nájar, Guillem
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work investigates the performance of a polyvinyl alcohol/acrylamide-based photopolymer (PVA/AA) under pulsed and continuous-wave (CW) laser exposure for holographic recording. Using a versatile setup that allows direct comparison between both regimes, diffraction efficiency (DE), angular responses, and material parameters were analyzed. Comparable maximum DE was achieved with both CW and pulsed laser exposure; however, the pulsed regime produces stronger attenuation along the grating depth, which emphasizes the need to lower the dye concentration. Furthermore, the temporal evolution of DE reveals a smaller influence of oxygen inhibition under CW exposure. Finally, second-order angular reconstructions confirm that pulsed gratings exhibit a better sinusoidal modulation, especially at low frequency rates. These results enhance the understanding of how pulsed exposure affects holographic recording and open pathways for optimizing photopolymer systems in advanced technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Magnetic field of a linear octupole

  • Arribas Garde, Enrique
  • Escobar García, Isabel
  • Ramírez Vázquez, Raquel
  • Martí, Arturo C.
  • Monteiro, Martín
  • Stari, Cecilia
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We measure the magnetic field produced by a linear octupole formed by four magnets placed in such a way that both their magnetic moments and their quadrupole moments cancel each other. The magnetic field is measured with the magnetic sensor of a smartphone together with a suitable app, using the Android operating system. The main objective is to determine the dependence of the x-component of the magnetic field on distance and compare the experimental results with the theoretical result that tells us that this dependence is a quintic decrease. Modern smartphones are equipped with various sensors: accelerometer, gyroscope, proximity sensor, ambient light sensor, capacitive sensors, magnetic sensor, GPS, and maybe others. The magnetic sensor allows us to measure the magnetic field and works by making use of the classical Hall effect. This magnetic sensor is being used in introductory physics laboratories in interesting ways.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Building-Integrated Concentrating Photovoltaics based on a low-toxicity photopolymer

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Low-toxicity solar concentrator systems represent an important challenge for outstanding photovoltaic (PV) applications. Particularly, multiplexed holographic lenses (MHL) as Holographic Solar Concentrators (HSC) provide insight into promising possibilities for Building-Integrated Concentrating PVs. This technology does not affect crucial ecosystems, and can convert buildings from energy consumers into energy suppliers. They can be used in windows, roofs, or walls, and a high diffraction efficiency and wide acceptance angle are desired. In this work, we presented several designs of MHL of low spatial frequency 525 lines mm−1, based on a low-toxicity photopolymer and supported on a window glass. The average diffraction efficiency of these HSC was evaluated at 633 nm, whereas the acceptance angle was evaluated by measuring the short-circuit current under solar illumination at different incident angles. Versatile and high-efficiency holographic elements have been used to concentrate sunlight from different relative positions during the day, avoiding the need for expensive tracking systems. To the best of our knowledge, this is the best trade-off between high diffraction efficiency (85%) and wide acceptance angle (104∘) in a low-toxicity holographic solar concentrator.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multidimensional definition domain for the absolute retardance in digital backplane liquid crystal devices

  • Sánchez-Montes, Adriana R.
  • Moya Aliaga, Adrián
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Tunability of the retardance by liquid crystal on silicon microdisplays is at the heart of modern wavefront engineering in Optics and Photonics. However, a full knowledge of its dependence on voltage and illumination wavelength is not yet experimentally accessible. This would be very convenient, not only to set the optimal working conditions for applications, but also, on a more fundamental level, to explore the topology of the tunability of the phase retardance. The initial 2D nature of this parametric space increases in digital backplane devices, where the actual voltage depends on both the digital sequence addressed and on its low and high voltage values. Here, we demonstrate an efficient and accurate procedure to evaluate the absolute retardance across this multidimensional parametric space, which is given by applied voltage and wavelength, providing a novel and unprecedented insight.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimización del procesado por láser de femtosegundo de polímeros comerciales mediante el control fino de los procesos térmicos y de absorción

  • Ortuño, Manuel
  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Este estudio se estudia la respuesta de tres polímeros comerciales (PVC, PET y PP) bajo irradiaciones multipulsos con un láser de femtosegundo (450 fs) de alta frecuencia (1 kHz-1 MHz) a λ=343 nm, 515 nm (1,40 J/cm2 para ambas longitudes de onda) y 1030 nm (1,70 J/cm2), permitiendo realizar un amplio estudio del procesado láser bajo parámetros como la absorción a diferentes longitudes de onda y la acumulación térmica en irradiaciones multipulso a diferentes frecuencias de repetición.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast Laser Direct Writing of Diffraction Gratings in PVA/AA Photopolymer with Tunable Phase Modulation Mechanisms

  • Bernabeu, Andrés P.
  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Nieto-Rodríguez, Belén
  • Puerto, Daniel
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
Diffractive optical elements (DOEs) are essential components in optical and photonic technologies, motivating the need for rapid mass production with high-precision fabrication methods. Photopolymers are particularly attractive for DOEs production because their optical phase can be modified via both surface and refractive index modulations. In this work, we report the fabrication of DOEs on PVA/AA photopolymers using ultrafast laser direct writing. By combining surface topography measurements with a phase depth model, we extract the surface and bulk phase depth contributions and demonstrate a transition from surface-dominated modulation at 1 kHz to bulk refractive index modification under cumulative conditions at 100 kHz. These outcomes highlight ultrafast laser direct writing as a powerful, rapid and controlled method for the high-quality and rapid fabrication of DOEs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving the efficiency of photopolymerized PVA/AA gratings by high frequency femtosecond-laser direct writing

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Mena Ortiz, Emilio José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser irradiation at λ=343 nm (1.40 J/cm2), 515 nm (1.40 J/cm2) and 1030 nm (1.70 J/cm2), resulting in a complete study of laser processing under parameters as the dominant absorption mechanisms at different wavelengths, as well as the thermal accumulation processes in irradiations at different repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization and optimization of the low-toxicity nanocomposite photopolymer Biophotopol for holographic couplers

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bravo Francés, Juan Carlos
  • Ferrández, J.
  • Neipp, Cristian
  • Gallego, Sergi
  • Beléndez, Augusto
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we aim to study and exploit the photosensitivity properties of a low-toxicity photopolymer Biophotopol for the manufacturing of holographic couplers for see-through applications. The different geometries used to record such holographic gratings, both in transmission and reflection schemes, are explained. In our proposal, no prisms or index matching systems are used in the recording geometry, thanks to the wavelength shift between the recording and reconstruction steps. Moreover, the material’s composition is optimized and characterized for different recording schemes. We provide experimental evidence that the holographic optical elements maintain their designed properties by allowing the diffracted beam to propagate under Total Internal Reflection at the Bragg condition. The shrinkage present in this material is overcome by including a cross-linker monomer and Pt nanoparticles, while also increasing the average refractive index modulation of the holograms. This effect also causes the recording light to be coupled within the system, providing a single coupler that can guide different wavelengths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

REDWorm: Caracterización automática del comportamiento del C. elegans en imágenes de microscopía óptica in vivo

  • Fernandez, Roberto
  • Zunzunegui, E.
  • Megías, Diego
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
El Caenorhabditis elegans (C. elegans) es un nematodo ampliamente utilizado como modelo en investigaciones biológicas debido a su simplicidad anatómica, ciclo de vida corto y similitud genética con los seres humanos. Estas características lo convierten en un modelo idóneo para estudiar enfermedades neurodegenerativas, así como otros trastornos genéticos y moleculares. En este trabajo, se ha desarrollado una aplicación, llamada REDWorm, capaz de detectar y analizar anomalías en el comportamiento del C. elegans a partir de imágenes de microscopía óptica in vivo. La herramienta incluye técnicas de procesamiento de imágenes y análisis del comportamiento, permitiendo generar datos cuantitativos reproducibles. Esta aplicación no solo facilita la estandarización de la información obtenida entre distintos laboratorios, sino que también facilita el análisis de datos, optimizando la interpretación de los resultados. Además, se alinea con los principios de las 3R (reemplazo, reducción y refinamiento) al promover la reducción del uso de animales vertebrados en la investigación y maximizar el rendimiento de los datos obtenidos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Higher orders enhancement in gratings produced by a vertically aligned LCoS

  • Nájar, Guillem
  • Martínez Guardiola, Francisco Javier
  • Sánchez-Montes, Adriana R.
  • Bernabeu, Andrés P.
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
Typically, a 360º phase-shift is required to implement diffractive optical elements (DOEs) in modern photonics applications. However, the possibility of showing much larger phase-shifts is a very appealing property which provides additional degrees of freedom to produce multiplexed functions onto DOEs. On the other hand, modern liquid crystal on silicon devices (LCoS) add real-time programmability to the functionality of the DOE displayed, but this has been typically demonstrated by parallel-aligned LCoS (PA-LCoS) devices. We show programmable DOEs produced using vertically-aligned LCoS (VA-LCoS) devices, with a phase-shift range largely exceeding 360º. We show some results dealing with blazed gratings and on the analysis of their higher diffraction orders, validating their use for multiorder diffractive optical elements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Information multiplexing from optical holography to multi-channel metaholography

  • Márquez, Andrés
  • Li, Chi
  • Beléndez, Augusto
  • Maier, Stefan A.
  • Ren, Haoran
  • Beléndez, Augusto
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography offers a vital platform for optical information storage and processing, which has a profound impact on many photonic applications, including 3D displays, LiDAR, optical encryption, and artificial intelligence. In this review, we provide a comprehensive overview of optical holography, moving from volume holography based on optically thick holograms to digital holography using ultrathin metasurface holograms in nanophotonics. We review the use of volume holograms for holographic multiplexing through the linear momentum selectivity and other approaches and highlight the emerging use of digital holograms that can be implemented by ultrathin metasurfaces. We will summarize the fabrication of different holographic recording media and digital holograms based on recent advances in flat meta-optics and nanotechnology. We highlight the rapidly developing field of metasurface holography, presenting the use of multi-functional metasurfaces for multiplexing holography in the use of polarization, wavelength, and incident angle of light. In the scope of holographic applications, we will focus on high bandwidth metasurface holograms that offer the strong sensitivity to the orbital angular momentum of light. At the end, we will provide a short summary of this review article and our perspectives on the future development of the vivid holography field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Liquid crystal doped photopolymer micro-droplets printed by a simple and clean laser-induced forward transfer process

  • Puerto, Daniel
  • Gallego, Sergi
  • Constantinescu, Cătălin-Daniel
  • Florian, Camilo
  • Ortuño, Manuel
  • Márquez, Andrés
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alloncle, Anne Patricia
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We print a tunable photopolymer (photopolymer dispersed liquid crystal -PDLC), using the laser-induced direct transfer technique without absorber layer, which was a challenge for this technique given the low absorption and high viscosity of PDLC, and which had not been achieved so far to our knowledge. This makes the LIFT printing process faster and cleaner and achieves a high-quality printed droplet (aspheric profile and low roughness). A femtosecond laser was needed to reach sufficiently peak energies to induce nonlinear absorption and eject the polymer onto a substrate. Only a narrow energy window allows the material to be ejected without spattering.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estrategias para el diseño de elementos ópticos holográficos de características específicas mediante fotopolimerización láser

  • Romo Ríos, Adrián Enrique
  • Lloret, Tomás
  • García-Vázquez, José Carlos
  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Beléndez, Augusto
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
El espesor de la capa y la rigidez o flexibilidad del polímero formado tras la polimerización son dos factores importantes a tener en cuenta dependiendo del elemento óptico holográfico (EOH) a desarrollar. Para aplicaciones de EOH tipo lente es habitual que el polímero tenga un espesor de capa inferior a 50 micrómetros y una flexibilidad de capa muy limitada. El espesor de la capa influye en el rendimiento en difracción del EOH y por tanto en el rendimiento que consiga el propio elemento al realizar su función durante su uso. Por otra parte la flexibilidad de la capa es un parámetro de gran importancia en el caso de que el EOH vaya unido a soportes con curvatura. Una baja flexibilidad impide la adaptación del EOH al soporte, dificultando o impidiendo su uso en la práctica. En este trabajo se estudian las alternativas en cuanto a monómeros y entrecruzantes que permitan un espesor de capa mayor y una flexibilidad adecuada para adaptarse a soportes curvados.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimization of Multiplexed Wide-angle Solar Concentrators with High Diffraction Efficiency

  • Lloret, Tomás
  • Morales-Vidal, Marta
  • Nieto-Rodríguez, Belén
  • García-Vázquez, José Carlos
  • Ramirez, Manuel G.
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The main objective of the work was to obtain a versatile holographic element to concentrate sunlight from different relative positions of the Sun during the day, avoiding the need for expensive tracking systems. For this purpose, symmetric and asymmetric holographic lenses of negative focal length were stored using peristrophic holographic multiplexing techniques to obtain holographic optical elements of width angular response and high diffraction efficiency. For this purpose, a low-toxicity photopolymer called Biophotopol whose dye was photosensitive at the recording wavelength of 473 nm was used. The holographic behavior of the solar concentrators (HSC) was studied by measuring the angular diffraction efficiency at 633 nm (near the maximum response of silicon cells). The efficiency of the complete HSC-solar cell system has been studied in short-circuit under solar illumination, using a solar simulator, at different incidence angles. In addition, the relationship between the angular separation between multiplexed HLs and the efficiency of the complete system has also been studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Absolute polarimetric calibration of the retardance of a liquid crystal on silicon microdisplay

  • Sánchez-Montes, Adriana R.
  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The phase-shift exhibited by liquid crystal on silicon devices (LCoS) depends on the voltage applied and the illumination wavelength. Most of the LCoS used in the labs are digitally addressed using a binary pulse width modulated signal. Usually, these devices are characterized for a very small range of the available binary voltage values and for specific wavelengths. In this work, we consider a commercial parallel-aligned liquid crystal on silicon device (PA-LCoS) in which the binary voltages are accessible through the software of the vendor. We perform a complete averaged Stokes polarimetric characterization of the device where we are able to obtain the absolute unwrapped retardance values for a wide range of voltage parameters and across the visible spectrum. This provides a practical approach to evaluate the whole range of phase modulation possibilities, and to analyze some issues related with the physics of the device.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of the recording of Fibonacci lenses using photopolymers with 3-D diffusion model

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Bernabeu, Andrés P.
  • Colomina-Martínez, Jaume
  • Fernandez, Roberto
  • Márquez, Andrés
  • Gallego, Sergi
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
In the present work, a 3-Dimensional diffusion model is proposed to predict the main properties of Diffractive Optical Elements (DOEs), recorded in photopolymers, including refractive index modulation and the evolution of the transverse intensity distribution. The model enables the selection of appropriate material characteristics based on the intended application of the DOE. Specifically, a PVA/AA photopolymer based on acrylamide is simulated using the proposed model, considering coverplating and index matching systems to mitigate the effects of thickness variation. In order to compare its properties using the suggested model, the simulation focuses on a Fibonacci Lens and the dependece of the intensity on the polymerization rate. Accordingly, axial intensity pattern is represented to prove the bifocal-behaviour of these diffractive lenses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metafiber transforming arbitrarily structured light

  • Li, Chenhao
  • Wieduwilt, Torsten
  • Wendisch, Fedja J.
  • Márquez, Andrés
  • Menezes, Leonardo de S.
  • Maier, Stefan A.
  • Schmidt, Markus A.
  • Ren, Haoran
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
Structured light has proven useful for numerous photonic applications. However, the current use of structured light in optical fiber science and technology is severely limited by mode mixing or by the lack of optical elements that can be integrated onto fiber end-faces for wavefront engineering, and hence generation of structured light is still handled outside the fiber via bulky optics in free space. We report a metafiber platform capable of creating arbitrarily structured light on the hybrid-order Poincaré sphere. Polymeric metasurfaces, with unleashed height degree of freedom and a greatly expanded 3D meta-atom library, were 3D laser nanoprinted and interfaced with polarization-maintaining single-mode fibers. Multiple metasurfaces were interfaced on the fiber end-faces, transforming the fiber output into different structured-light fields, including cylindrical vector beams, circularly polarized vortex beams, and arbitrary vector field. Our work provides a paradigm for advancing optical fiber science and technology towards fiber-integrated light shaping, which may find important applications in fiber communications, fiber lasers and sensors, endoscopic imaging, fiber lithography, and lab-on-fiber technology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of a vertically aligned liquid-crystal on silicon microdisplay for photonics applications

  • Nájar, Guillem
  • Bernabeu, Andrés P.
  • Sánchez-Montes, Adriana R.
  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Puerto, Daniel
  • Márquez, Andrés
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
We present the characterization results for an analogically addressed vertically aligned liquid crystal on silicon microdisplay (VA-LCoS). We show that it covers more than 360o phase modulation range at 1550 nm, and that in the visible the range available enables the generation of multiorder DOEs. There are basically no studies dealing with the characterization of vertically aligned high resolution LCoS devices, since the ones typically found in the literature and commercially available correspond to the parallel aligned. We have also verified that the microdisplay used in this work is free from flicker, which is a very interesting feature for application where the phase stability is of the utmost importance. The results shown here represent a first step in the work underway oriented to the generation of programmable DOEs for telecommunication applications (C-band) and for the visible spectrum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Challenges and impact of the grating vector direction in high-frequency LC-SLM binary phase gratings

  • Sánchez-Montes, Adriana R.
  • Francés, Jorge
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Sirvent-Verdú, Joan Josep
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Márquez, Andrés
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
Spatial Light Modulators (SLMs) typically use PA-LCoS microdisplays, known for high resolution and small pixel size, for phase-only modulation. However, different phenomena related to the cross-talk, fringing fields between pixels, and out-of-plane reorientation of the liquid crystal director degrade the performance of pixelated SLM devices. The technology faces the challenge of overcoming these phenomena as novel applications require higher pixel size resolutions and smaller pixel sizes. This work applies a numerical workflow that permits the analysis of the different parameters that set up a PA-LCoS microdisplay, e.g., fill factor, pixel size, external voltage and the influence of the LC director and the interaction of light through the structure. Specifically, we focus our analysis on the impact of high-frequency binary phase gratings on the radiometric and polarimetric response with orthogonal grating vectors. The heterogenous LC distribution as a function of the grey level along the 3D structure and the inhomogeneous distribution of the Stokes parameters are analysed, setting up a framework to analyse the nonlinear behaviour of the system and its impact on diffraction and polarimetric performance in future microdisplays with higher resolutions and smaller pixel sizes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manufacturing reflection holographic couplers for see-through applications recorded in photopolymers without prisms: An experimental validation

  • Sirvent-Verdú, Joan Josep
  • Bravo Francés, Juan Carlos
  • Colomina-Martínez, Jaume
  • Nájar, Guillem
  • Neipp, Cristian
  • Francés, Jorge
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In the present work, the viability of a novel recording geometry to produce reflection holographic couplers is analyzed. Recalling the idea of previous works, photopolymers are used as the recording material because they have been proven to be well-suited for the intended see-through application: the capability to provide a virtual image without compromising the information about the surrounding environment. Moreover, holography fundamentals give us the proper background to examine the proposed design, where no prisms or microlenses arrays are used. Aiming to support the analysis, we provide experimental evidence that the produced reflection holographic gratings exhibit the correct properties to work as a coupler, where the sensitivity of the material and its properties are studied and examined.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimizing femtosecond laser processing of commercial polymers by fine control of the thermal and absorption process

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Mena Ortiz, Emilio José
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We investigate the response of three commercial polymers (poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET) and polypropylene (PP)) under high frequency (1 kHz-1 MHz) femtosecond (450 fs) multi-pulse (N=10-1500) laser irradiation at λ=343 nm (1.40 J/cm2), 515 nm (1.40 J/cm2) and 1030 nm (1.70 J/cm2), resulting in a complete study of laser processing under parameters as the dominant absorption mechanisms at different wavelengths, as well as the thermal accumulation processes in irradiations at different repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of surface structures for PVA/AA photopolymer functionalization by ultrafast laser processing

  • Bernabeu, Andrés P.
  • Sopeña, Pol
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Gallego, Sergi
  • Francés, Jorge
  • Márquez, Andrés
  • Grojo, David
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Ultrafast laser processing provides a powerful approach for tailoring the surface morphology of photosensitive materials with high spatial precision. In this work, we investigate the formation of surface relief structures in poly(vinyl alcohol)/acrylamide (PVA/AA) photopolymers under femtosecond laser irradiation, focusing on the role of the repetition rate in the photopolymerization process. Experiments were performed at 1030 nm using 220 fs pulses, analyzing single-pulse irradiation and multipulse regimes, where repetition rates of 1 kHz and 60 kHz were explored. The resulting structures exhibit a Gaussian-like morphology associated with the diffusion-driven monomer redistribution. A systematic study of the structure height as a function of the fluence reveals a clear dependence on both the number of pulses and the repetition rate. In particular, lower repetition rates lead to larger structure heights under identical irradiation conditions, indicating that the temporal spacing between pulses enhances monomer diffusion towards the irradiated region. These results highlight the role of repetition rate as a key parameter governing the balance between photopolymerization and mass transport, enabling controlled surface structuring in photopolymer materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rigorous estimation of the LC director distribution and its influence on light propagation in LC-based optical devices

  • Francés, Jorge
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
Devices based on liquid crystal (LC) exhibit a great interest in Optics due to their capability to set up applications with variable properties. Some examples of these elements are spatial light modulators (SLM) based on parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplays. Other applications of LC in diffractive elements are based on polymer-dispersed liquid crystal devices (H-PDLC), e.g. diffraction lenses, optical data storage, and image capture devices. These examples share one of the most exciting features of LC, which is the capability to change the optical properties with an external voltage. Here, a review of the latest developments in estimating the director distribution in LC-based devices is summarised. The results here summarised show the potential of the approach for rigorously analysing the fringing field and crosstalk polarimetric impact on PA-LCoS devices, the bending in H-PDLC fringes, and the application of machine learning on the estimation of the LC director distribution in this kind of devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the conservation of different holograms sandwiched between glasses

  • Sirvent-Verdú, Joan Josep
  • García-Vázquez, José Carlos
  • Gallego, Sergi
  • Puerto, Daniel
  • Neipp, Cristian
  • Colomina-Martínez, Jaume
  • Bravo Francés, Juan Carlos
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are designed and engineered with versatile applications including optics and photonics. Holography is one of the classical porpoises that use photopolymers as holographic recording materials. The success of these materials can be seen in the market with the photopolymer fabricated by Covestro. Some of these holographic applications require a long-time life of the holograms recorded in photopolymers. Nevertheless, initial tests of Covestro holograms show significant degradation after less than one year of exposure even after sealing and degradation occurs under solar light exposition. In this sense, it is important to perform deeper studies of the different possibilities for hologram conservation. Usually, the first step after recording is the material cure, with UV or visible light, to eliminate the residual dye and monomer. With this process high efficiency holograms can also be obtained. Afterwards, an index matching technique can be used to cover the material with a glass or it is possible the application of aerosol sealant. In this paper we analyze the introduction of holograms between two glasses linked by pressure, using Bayfol HX 200 from Covestro as the recording material. In order to characterize the process, four different spatial frequencies were tested, which were stored either by transmission or reflection schemes. The data of the reconstruction step has been measured before and after the encapsulation. In addition, multiple holograms have been superposed in the same glass, where we have found that shrinkage is more significant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Puesta a punto de un sistema para holografía pulsante en régimen lineal

  • Mena Ortiz, Emilio José
  • Sirvent-Verdú, Joan Josep
  • Sánchez-Montes, Adriana R.
  • Nájar, Guillem
  • Alvarez, Mariela L.
  • Gallego, Sergi
  • Márquez, Andrés
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
En este trabajo se ha desarrollado y se ha puesto a punto un sistema experimental en el cual, mediante espejos abatibles, se puede incorporar un láser de emisión continua o un láser pulsante de nanosegundo (láser pulsante Nd:YAG con tasa de repetición de 10 𝐻𝑧, duración de pulso de 6 𝑛𝑠 y energía por pulso de 150 𝑚𝐽), el cual, gracias a un seeder, se consigue obtener un haz coherente. De esta forma, al registrar con una longitud de onda de 𝜆 = 532 𝑛𝑚 y, conocido el ángulo de incidencia 𝜃 por la ley de Bragg, se pretende alinear el montaje para obtener redes de volumen de aproximadamente 1500 𝑙í𝑛𝑒𝑎𝑠/𝑚𝑚. Con este montaje, formado por un sistema afocal tipo telescopio de Galileo, un beamsplitter y diversos espejos, se consigue expandir y colimar el haz, que es dividido en dos, obteniendo el haz de referencia y el objeto. Estos inciden sobre el material fotosensible registrándose las franjas de interferencia que forman y, por tanto, generándose la red de volumen.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estrategías de desenrollado de fase para metrologías de retardadores variables, Phase-unwrapping strategies for metrology of variable retarders

  • Sánchez-Montes, Adriana R.
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo presentamos diferentes características que debemos tener en cuenta cuando queremos evaluar el retardo de una lámina retardadora variable, o de cualquier dispositivo que se pueda comportar como una de estas láminas. En nuestra experiencia, y debido a que están involucradas diferentes funciones trigonométricas, hemos encontrado que siempre aparece cierta incertidumbre en el retardo medido que está limitado por los valores obtenidos de dichas funciones. Intentaremos contextualizar los resultados con los diferentes modos de desenrollado que podemos utilizar y ver en qué punto se produce dicho enrollado, así como las consideraciones que deberemos tener en cuenta para evaluar el retardo para que se ajuste a lo que realmente estamos midiendo.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailored adaption of thermal diffusion by ablation cooling on polymers through unique dependence on laser repetition rate

  • Bernabeu, Andrés P.
  • Puerto, Daniel
  • Reyna Jiménez, José
  • Francés, Jorge
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Beléndez, Augusto
  • Bernabeu, Andrés P.|||/items/8a142453-1449-4dce-ac76-da0e9e75e6f7
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
High repetition rate femtosecond laser processing reduces thermal effects through ablation cooling. This often-overlooked effect occurs when ablation is induced in the heat accumulation regime, typically associated with the GHz repetition rate regime, where undesirable shielding effects occur. However, the low thermal diffusivity and phase transition temperatures of polymers enable ablation cooling to be observed at lower repetition rates (<1 MHz), while preventing shielding effects. Separating these phenomena offers insights into ablation cooling effects that are applicable to a broader range of materials in GHz regimes. This work analyzes the thermal and ablative effects on poly(ethylene terephthalate) (PET) surfaces resulting from high repetition rate (10 kHz – 1 MHz) femtosecond (450 fs) laser irradiation at λ = 515 nm, for different fluences (0.91 – 1.68 J/cm2) and pulse numbers (200 – 400). The results evidence that extended thermal diameters decrease at higher repetition rates (∼1 MHz) compared to the 40 – 100 kHz regime due to ablation cooling, resulting in more optimal processing. This effect is independent of fluence and pulse number, being influenced only by repetition rate. A thermal model explains the reduction of thermal effects and saturation of ablation diameters, serving as a predictive tool for modifications induced at high repetition rates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis on the presence of out-of-plane LC components on PA-LCoS devices due to crosstalk and fringing fields

  • Sánchez-Montes, Adriana R.
  • Nájar, Guillem
  • Moya Aliaga, Adrián
  • Mena Ortiz, Emilio José
  • Francés, Jorge
  • Márquez, Andrés
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Mena Ortiz, Emilio José|||/items/5853ecff-c658-4619-8337-91d82898a23d
  • Nájar, Guillem|||/items/3f4f4441-85bd-4283-b525-2ac51cf99201
  • Sánchez-Montes, Adriana R.|||/items/03c3a515-cd80-4dd6-99f9-ada9511ec3e0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
  • Moya Aliaga, Adrián|||/items/28c8e975-7e7b-4359-83ed-ff5228b5be31
It is well known that Spatial Light Modulators (SLM) are of great interest and used in many different areas because of their continuous capability of light modulation and their potential as a linear variable retarder. However, high-definition SLM devices face the challenge of providing high performance under the influence of different phenomena, such as crosstalk between adjacent pixels, fringing fields, and diffraction effects arising from the finite pixel grid pattern. In this work, a numerical analysis that computes the director orientation as a function of the retardance across specific voltages (gray level) is compared to experimental results. More specifically, this work is focused on analysing how previously mentioned phenomena affect the interpretation of the residual twist angle in parallel-aligned (PA) on SLM. This twist angle is computed from the Stokes parameter and compared to the actual orientation of the director distribution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multifocal Fresnel lenses with adjustable focal points recorded in photopolymers

  • Bravo Francés, Juan Carlos
  • Sirvent-Verdú, Joan Josep
  • Colomina-Martínez, Jaume
  • Reyna Jiménez, José
  • Fernandez, Roberto
  • Márquez, Andrés
  • Gallego, Sergi
  • Bravo Francés, Juan Carlos|||/items/953aec2e-b506-4fae-b980-4b0509404e46
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
We present the recording of multifocal lenses based on a linear Fresnel zone combination in a photopolymer medium based on polyvinyl-alcohol acrylamide (PVA/AA). A 4F system with a spatial light modulator (SLM) is used to compare experimental results with numerical simulations, achieving a ×2/3 magnification that enhances resolution in lens profile measurements. On the other hand, a genetic algorithm is proposed to optimize energy allocation at each focal point, maximizing the Fresnel-Kirchhoff integral in multifocal lens configurations. This work examines the performance and phase design of these lenses, highlighting the crucial role of an optimal design in controlling energy distribution among focal points for visible wavelengths. Such control enables compensation for energy losses at shorter focal lengths (around 70 mm), which arise due to the low-pass filtering effect of the 4F system during the recording process. Furthermore, the proposed setup facilitates the mass production of these diffractive lenses with 3 to 5 mm radius sizes, ensuring efficient fabrication while maintaining high diffraction efficiency.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Connecting the microscopic depolarizing origin of samples with macroscopic measures of the Indices of Polarimetric Purity

  • Canabal-Carbia, Mónica|||0000-0002-3735-1176
  • Estévez, Irene|||0000-0003-3693-8335
  • Nabadda, Esther|||0000-0002-6739-4468
  • Garcia-Caurel, Enrique
  • Gil Pérez, José Jorge|||0000-0003-1740-2244
  • Ossikovski, Razvigor
  • Márquez Ruiz, Andrés|||0000-0003-4123-2011
  • Moreno, Ignacio|||0000-0002-1550-0601
  • Campos Coloma, Juan|||0000-0002-2479-4373
  • Lizana, Angel|||0000-0002-4861-8657
In this work we show how a specific set of three depolarizing observables, the Indices of Polarimetric Purity (IPP), P1, P2 and P3, are ideal metrics to study the depolarization characteristic of media. We simulate different depolarizing scenarios, based on different depolarizing origins, and we study the corresponding IPP values. The simulations are based on the incoherent addition of multiple elemental polarizing elements, as ideal polarizers and/or retarders with different specific characteristics (orientation, retardance, transmittance, etc.). Further depolarizing scenarios are also studied by including the effect of ideal depolarizers. We show for the first time how by analyzing depolarizing systems through IPP we unravel two different depolarizing origins: isotropic and anisotropic depolarization, with meaningful physical interpretation. The former, isotropic depolarization is related to pure scattering processes, and mainly connected with P3 observable. The later, anisotropic depolarization is originated by microscopic constituent elements showing polarimetric anisotropy (dichroic and/or birefringent elements with different characteristics) and anisotropic scattering produced by these elements, and mainly described by P1 and P2 observables. Both effects can be simultaneously observed in real samples and give us information of the processes that give rise to depolarization in light-matter interactions. The simulated results are experimentally validated by analyzing the depolarizing behavior, in terms of IPP, of diverse real samples with easy physical interpretation, and direct connection with simulations. The present study could be of interest in multiple scenarios, to further understand the depolarizing response of samples, and it can be of special interest for the study of biological tissues and pathologies, as they present important depolarizing behavior.