Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photopolymer characterization by high frequency pulsed laser

  • Puerto, Daniel
  • Gallego, Sergi
  • Sirvent-Verdú, Joan Josep
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Maximizing phase modulation in photopolymers remains a challenge in order to use these materials to fabricate photonics devices. Different material compositions and irradiation conditions have been studied in order to achieve it. One of the main conclusions has been that with continuous laser exposure better results are achieved. However, our results show that higher phase modulation can be achieved using pulsed laser. The study has been done with crosslinked acrylamide-based photopolymers (AA/PVA), Biophotopol and Holographic Polymer-Dispersed Liquid Crystals (HPDLC) exposed with a pulsed laser (532 nm). Thus, phase modulation increases of 8-15% have been achieved between pulsed laser and continuous laser exposure, with a maximum phase depth of 3π radians in AA/PVA, ~3π/2 in Biophotopol and ~π in H-PDLC. This opens the door to the use of this photopolymer in large-scale manufacturing, such as H-PDLC photopolymers to fabricate tunable lenses using the laser-induced direct transfer (LIFT) technique.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable focal photopolymer lenses printed for the first time by laser-induced-forward transfer without a sacrificial layer

  • Puerto, Daniel
  • Gallego, Sergi
  • Constantinescu, Cătălin-Daniel
  • Florian, Camilo
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alloncle, Anne Patricia
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The fabrication of polymeric lens arrays on flexible surfaces for its use in wide-field visual systems is a challenge that is being addressed by using the Laser Induced Forward Transfer (LIFT) technique. The objective is to achieve polymer laser printing by improving both the overall printing quality and the manufacturing time of these lens matrices compared to other techniques. Another challenge when using tunable polymers is the customization of tunable focal lenses dynamically controlling their optical properties. In this work we address both aspects by using a tunable photopolymer thanks to liquid crystal molecules, such as H-PDLC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic Resistivity Surfaces Produced in ITO Films by Laser‐Induced Nanoscale Self‐organization

  • López-Santos, Carmen
  • Puerto, D.
  • Siegel, Jan
  • Macías-Montero, M.
  • Florian, Camilo
  • Gil-Rostra, J.
  • López-Flores, Víctor
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Solís Céspedes, Javier
11 pags., 8 figs., 2 tabs., Highly anisotropic resistivity surfaces are produced in indium tin oxide (ITO) films by nanoscale self‐organization upon irradiation with a fs‐laser beam operating at 1030 nm. Anisotropy is caused by the formation of laser‐induced periodic surface structures (LIPSS) extended over cm‐sized regions. Two types of optimized structures are observed. At high fluence, nearly complete ablation at the valleys of the LIPSS and strong ablation at their ridges lead to an insulating structure in the direction transverse to the LIPSS and conductive in the longitudinal one. A strong diminution of In content in the remaining material is then observed, leading to a longitudinal resistivity ρL ≈ 1.0 Ω·cm. At a lower fluence, the material at the LIPSS ridges remains essentially unmodified while partial ablation is observed at the valleys. The structures show a longitudinal conductivity two times higher than the transverse one, and a resistivity similar to that of the pristine ITO film (ρ ≈ 5 × 10−4 Ω·cm). A thorough characterization of these transparent structures is presented and discussed. The compositional changes induced as laser pulses accumulate, condition the LIPSS evolution and thus the result of the structuring process. Strategies to further improve the achieved anisotropic resistivity results are also provided., This research was funded by the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI, Ministry of Research and Innovation), and the European Regional Development Fund (ERDF) (grant numbers TEC2017-82464-R, PID2019-109603RA-I00, and PID2019- 110430GB-C21), the “Consejería de Economía y Conocimiento de la Junta de Andalucía” (PAIDI-2020 projects P18-RT-3480 and -6079). The authors also acknowledge the Consejo Superior de Investigaciones Científicas for the “Intramural Project” (201850E057). C.L.-S. acknowledges the funding of the University of Seville through the “VI Plan Propio de Investigación y Transferencia de la US” (VI PPIT-US). M.M.-M. acknowledges the postdoctoral Juan de la Cierva Incorporación grant (IJCI-2017-33317)) of the same ministry. C.F. thanks the support from the European Commission through the Marie Curie Global Fellowship grant number 844977. V.L.-F. thanks the support from European Commission/Junta de Andalucía Talent-Hub Program. The authors thank the Research, Technology, and Innovation Center of the University of Seville (CITIUS) and Microscopy Service of the University Pablo de Olavide (Seville) for access to several material characterization facilities, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation

  • Florian, Camilo
  • Fuentes-Edfuf, Yasser
  • Solís Céspedes, Javier
  • Skoulas, E.
  • Stratakis, E.
  • Sánchez-Cortés, Santiago
  • Siegel, Jan
17 pags., 8 figs. -- This article belongs to the Special Issue Short and Ultra-Short Laser Materials Processing – Advantages and Applications, The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and µ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput., This research was supported by the LiNaBioFluid Project (H2020-FETOPEN-2014–2015RIA, Grant No. 665337) of the European Commission as well as the research grants (TEC2017-82464-R and PiD2020-112770RB-C21) from the Spanish Ministry of Economy and Competitiveness. C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship—Global Grant No. 844977.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Printing via Laser-induced forward transfer and the future of digital manufacturing

  • Florian, Camilo
  • Serra, P.
12 pags., 7 figs., 2 tabs. -- This article belongs to the Special Issue Advanced Pulse Laser Machining Technology, In the last decades, digital manufacturing has constituted the headline of what is starting to be known as the ‘fourth industrial revolution’, where the fabrication processes comprise a hybrid of technologies that blur the lines between fundamental sciences, engineering, and even medicine as never seen before. One of the reasons why this mixture is inevitable has to do with the fact that we live in an era that incorporates technology in every single aspect of our daily lives. In the industry, this has translated into fabrication versatility, as follows: design changes on a final product are just one click away, fabrication chains have evolved towards continuous roll-to roll processes, and, most importantly, the overall costs and fabrication speeds are matching and overcoming most of the traditional fabrication methods. Laser-induced forward transfer (LIFT) stands out as a versatile set of fabrication techniques, being the closest approach to an all-in-one additive manufacturing method compatible with virtually any material. In this technique, laser radiation is used to propel the material of interest and deposit it at user-defined locations with high spatial resolution. By selecting the proper laser parameters and considering the interaction of the laser light with the material, it is possible to transfer this technique from robust inorganic materials to fragile biological samples. In this work, we first present a brief introduction on the current developments of the LIFT technique by surveying recent scientific review publications. Then, we provide a general research overview by making an account of the publication and citation numbers of scientific papers on the LIFT technique considering the last three decades. At the same time, we highlight the geographical distribution and main research institutions that contribute to this scientific output. Finally, we present the patent status and commercial forecasts to outline future trends for LIFT in different scientific fields., C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship—Global grant No. 844977, while P.S. acknowledges the support from project PID2020-112669GB-I00 funded by MCIN/AEI/10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-focal laser processing in transparent materials using an ultrafast tunable acoustic lens

  • Du, Xiaohan
  • Florian, Camilo
  • Arnold, Craig B.
4 pags., 4 figs., Fast and versatile alteration of focal positions is critical for applications including selective volumetric modification and parallel laser processing. In this Letter, we implement and characterize an ultrafast, variable focal system using a tunable acoustic gradient of index lens to achieve multi-focal laser processing. We apply our method to the femtosecond laser-induced intra-volumetric modification in glass to show the flexibility in controlling focal positions. Based on this understanding, we exploit the multi-focal nature of the system to demonstrate laser machining on both surfaces of a transparent glass slide in a single lateral scan., Princeton University (DG5709, Eric and Wendy Schmidt Fund); European Commission (FOCUSIS, Grant Agreement 844977, Marie Curie Fellowship IF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parametric study of multi-focal laser processing using an ultrafast tunable acoustic lens

  • Du, Xiaohan
  • Florian, Camilo
  • Arnold, Craig B.
5 pags., 4 figs. -- SPIE LASE, 2022, 4 March 2022, San Francisco, California, United States, Multi-focal beam shaping can enhance laser processing throughput by increasing the number of processing sites and lowering processing time. This paper implements multi-focal beam shaping by adopting a tunable acoustic gradient of index (TAG) lens, which scans the focal position in the axial direction at 140 kHz. When the laser is synced with the corresponding phases of the TAG lens, multiple focal spots can be selected, allowing for ultrafast and flexible multi-focal modulation without physically moving any optics. We further characterize the tuning parameters of the TAG lens, such as its frequency, amplitude, and phase, and demonstrate the dual-focal marking on both sides of a glass slide in a single lateral scan., We acknowledge funding by the Princeton University Eric and Wendy Schmidt Fund (DG5709). C.F acknowledges funding by the European Commission (Marie Curie Fellowship IF, FOCUSIS, Grant Agreement 844977). We acknowledge the support from Mitutoyo Corporation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

  • Florian, Camilo
  • Fischer, Daniel
  • Freiberg, Katharina
  • Duwe, Matthias
  • Sahre, Mario
  • Schneider, Stefan
  • Hertwig, Andreas
  • Krüger, Jörg
  • Rettenmayr, Markus
  • Beck, Uwe
  • Undisz, Andreas
  • Bonse, Jörn
21 pags., 9 figs., 1 tab. -- This article belongs to the Special Issue Advanced Pulse Laser Machining Technology, Superficial amorphization and re-crystallization of silicon in <111> and <100> orientation after irradiation by femtosecond laser pulses (790 nm, 30 fs) are studied using optical imaging and transmission electron microscopy. Spectroscopic imaging ellipsometry (SIE) allows fast data acquisition at multiple wavelengths and provides experimental data for calculating nanometric amorphous layer thickness profiles with micrometric lateral resolution based on a thin-film layer model. For a radially Gaussian laser beam and at moderate peak fluences above the melting and below the ablation thresholds, laterally parabolic amorphous layer profiles with maximum thicknesses of several tens of nanometers were quantitatively attained. The accuracy of the calculations is verified experimentally by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (STEM-EDX). Along with topographic information obtained by atomic force microscopy (AFM), a comprehensive picture of the superficial re-solidification of silicon after local melting by femtosecond laser pulses is drawn., C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship—Global grant No. 844977 and funding from the Horizon 2020 CellFreeImplant European project. D.F., M.D., S.S., A.H. and U.B. gratefully acknowledge the funding from the German Central Innovation Program (AiF-ZIM) under grants No. ZF4044219AB7 and ZF4460401AB7. K.F., M.R. and A.U. acknowledge support by the German Research Foundation (grant Nos. UN 341/3-1 and Inst 275/391-1). J.B. acknowledges the projects CellFreeImplant and LaserImplant. These two projects have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements No. 800832 (CellFreeImplant) and No. 951730 (LaserImplant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Probing Light by Matter: Implications of Complex Illumination on Ultrafast Nanostructuring

  • Florian, Camilo
  • Du, Xiaohan
  • Arnold, Craig B.
33 pags., 19 figs., 8 tabs. -- Part of the Springer Series in Optical Sciences book series (SSOS,volume 239). -- Chapter 8, Pushing the limits of precision and reproducibility in ultrafast laser-based nanostructuring requires detailed control over the properties of the illumination. Most traditional methods of laser-based manufacturing rely on the simplicity of Gaussian beams for their well-understood propagation behavior and ease of generation. However, a variety of benefits can be obtained by moving beyond Gaussian beams to single or multiple tailored beams working toward optimal spatial and temporal control over the beam profiles. In this chapter, we center our attention on methods to generate and manipulate complex light beams and the resulting material interactions that occur in response to irradiations with these non-traditional sources. We begin with a discussion on the main differences between Gaussian and more complex light profiles, describing the mechanisms of phase and spatial control before narrowing the discussion to approaches for spatial structuring associated with materials processing with ultrashort laser pulses. Such structuring can occur in both far-field propagating architectures, considering rapidly varying spatial profiles generated mechanically or optically, as well as near-field, non-propagating beams associated with plasmonic and dielectric systems. This chapter emphasizes some of the unique abilities of complex light to shape materials at the nanoscale from a fundamental perspective while referencing potential applications of such methods., C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship – Global grant No. 844977., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Creation of Material Functions by Nanostructuring

  • Mezera, Marek
  • Florian, Camilo
  • Römer, Gert-Willem
  • Krüger, Jörg
  • Bonse, Jörn
60 pags., 34 figs., 2 tabs. -- Chapter 23. -- Part of the Springer Series in Optical Sciences book series (SSOS,volume 239), Surface nanostructures provide the possibility to create and tailor surface functionalities mainly via controlling their topography along with other chemical and physical material properties. One of the most appealing technologies for surface functionalization via micro- and nanostructuring is based on laser processing. This can be done either via direct contour-shaping of the irradiated material using a tightly focused laser beam or in a self-ordered way that allows employing larger laser beam diameters along with areal scanning to create a variety of laser-induced periodic surface structures (LIPSS). For the latter approach, particularly ultrashort pulsed lasers have recently pushed the borders across long-lasting limitations regarding the minimum achievable feature sizes and additionally boosted up the production times. This chapter reviews the plethora of recently investigated appli cations of LIPSS—for example, via imposing diffractive or plasmonic structural colors, the management of liquids and surface wetting properties, biomedical and bioinspired functionalities, beneficial effects in tribology for reducing friction and wear, the manipulation of optical scattering and absorption in photovoltaics, or the modification of magnetic or superconducting surface properties in other energy applications. The footprint of the LIPSS-based technology is explored in detail regarding the current state of industrialization, including an analysis of the market and associated LIPSS production costs., The authors acknowledge the projects Laser4Fun, CellFreeImplant, BioCombs4Nanofibers, and LaserImplant. These projects have received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 675063 (Laser4Fun, https://www.laser4fun.eu), No. 800832 (CellFreeImplant), No. 862016 (BioCombs4Nanofibers, http://biocombs4nanofibers.eu), and No. 951730 (LaserImplant, http:// laserimplant.eu). C.F. acknowledges the Individual Fellowship Marie Skłodowska-Curie project FOCUSIS under grant agreement No. 844977., Peer reviewed