Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fully Vacuum Deposited Perovskite Solar Cells in Substrate Configuration

  • Abhyuday, Paliwal
  • Zanoni, Kassio P. S.
  • Roldán-Carmona, Cristina
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] This work demonstrates the fabrication of perovskite solar cells in substrate configuration by vacuum-deposition methods. The resultant solar cells demonstrate high efficiency of 19% and thermal stability of more than 550 h. The use of mature and industry-friendly vacuum-deposition methods as well as the demonstrated approach of fabricating the perovskite solar cell may help in the upscaling and future commercialization of perovskite solar cells, The research leading to these results has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for project PROMETEU/2020/077 and A.P. for grant GRISOLIAP/2020/134. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI) project PID2021-126444OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; K.P.S.Z. for grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; and C.R.-C. for grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perovskite/Perovskite Tandem Solar Cells in the Substrate Configuration with Potential for Bifacial Operation

  • Gil-Escrig, Lidón
  • Hu, Shuaifeng
  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Roldán-Carmona, Cristina
  • Sessolo, Michele
  • Wakamiya, Atsushi
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Perovskite/perovskite tandem solar cells have recently exceeded the record power conversion efficiency (PCE) of single-junction perovskite solar cells. They are typically built in the superstrate configuration, in which the device is illuminated from the substrate side. This limits the fabrication of the solar cell to transparent substrates, typically glass coated with a transparent conductive oxide (TCO), and adds constraints because the first subcell that is deposited on the substrate must contain the wide-bandgap perovskite. However, devices in the substrate configuration could potentially be fabricated on a large variety of opaque and inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation, starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the potential to be used as bifacial tandem solar cells., The research leading to these results received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for Projects IDIFEDER/2018/061 and PROME-TEU/2020/077; A.P. for Grant GRISOLIAP/2020/134; K.P.S.Z. for Grant APOSTD/2021/368; C.R.-C. for Project CIDEGENT/2020/046; M.S. for Project CISEJI/2022/43. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; L.G.-E. for Grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; M.S. for Grant RYC-2016-21316 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in Your Future". This work was also supported by the JST-Mirai Program (JPMJMI22E2), NEDO, the International Collaborative Research Program of ICR, Kyoto University, a Grant-in-Aid for Scientific Research (A) (21H04699), JSPS (Research Fellowship for Young Scientists 21J14762), and the Chinese Scholarship Council (CSC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organic Light-Emitting Diodes Combining Thick Inorganic Perovskite Hole Transport Layers and Ultrathin Emitting Layers

  • Forzatti, Michele
  • Chin, Sang-Hyun
  • Sessolo, Michele
  • Tordera, Daniel
  • Bolink, Henk J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Organic light-emitting diodes have a huge gain in popularity over the past 25 years for display and lighting applications, but the production of low-cost efficient devices remains a challenge. OLEDs using sub-nanometer undoped emissive layers are a route to fabricate cost-effective devices but, as they are inherently thin, it opens to issues with variation in thickness and shunting paths. At the same time, lead chloride perovskites are currently being investigated as charge transport materials in light-emitting devices owing to their wide bandgap, and remarkable high carrier mobility. In this work, for the first time, OLEDs that combine vacuum-processed thick cesium lead chloride perovskite hole transport layers with ultrathin Ir complex-based emissive layers are reported. Defects on the perovskite film are suppressed and the thickness of the emitting layer is optimized. Semitransparent devices are also fabricated with an average visible transmittance of over 50%. The results show extraordinarily thick devices (>1 mu m) with low turn-on voltage (3.3 V), high luminance (>15 000 cd m(-2)) and efficiencies (up to 54.1 cd A(-1)), and a negligible efficiency roll-off in the display applications luminance region., M.F. and S.-H.C. contributed equally to this work. The authors acknowledge financial support of the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 834431) and by the European Union's Horizon 2021 research and innovation programme under grant agreement No. 101073045 (TADFsolutions). The authors also acknowledge financial support from the Comunitat Valenciana (CIGE/2021/027 and CISEJI/2022/43).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organic Light-Emitting Diodes Comprising an Undoped Thermally Activated Delayed Fluorescence Emissive Layer and a Thick Inorganic Perovskite Hole Transport Layer

  • Forzatti, Michele
  • Held, Vladimir
  • Stanzani, Edoardo
  • Hall, David
  • Sun, Dianming
  • Brotons-Alcazar, Isaac
  • Siffalovic, Peter
  • Jenatsch, Sandra
  • Zysman-Colman, Eli
  • Bolink, H.J.
  • Tordera, Daniel
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Organic light-emitting diodes (OLEDs) hold potential for next-generation displays and lighting solutions, but current OLED displays rely on the use of scarce metals or fluorescent emitters. Thermally activated delayed fluorescence (TADF) compounds kickstarted a new, promising class of OLEDs as organic TADF emitters do not contain scarce platinoid elements yet remain highly efficient. However, similarly to phosphorescent emitters, their incorporation into devices typically requires complicated doping techniques when vacuum processed. Lowering the mass production costs of high-performing OLEDs using simpler fabrication techniques remains a challenge. Here, we report OLEDs comprising a thermally evaporated CsPbCl3 perovskite transport layer and a TADF-based single-component emitting layer by exploring different approaches to obtain efficient undoped OLEDs, both solution- and vacuum-processed. We first demonstrated the compatibility of the perovskite layer with the solution processing of a TADF dendrimer for host-free, thick emitting layers, with an efficiency of 15 cd A(-1) well over a luminance of 1000 cd m(-2). Then, we employed a TADF small molecule as the emitter and reduced its layer's thickness to the subnanometer regime, while the incorporation of the perovskite increased the required total device thickness. The resulting devices showed a low turn-on voltage of 3.3 V, a high luminance of 11 152 cd m(-2), and a high efficiency of 67.6 cd A(-2), equaling that of 20 times thicker emissive layers. These findings highlight the versatility of using a perovskite as a transport layer and the potential of combining it with an undoped TADF emitting layer for fabricating simple, cost-effective, and efficient OLEDs., This project has been partly funded by the European Union Horizon 2021 research and innovation program under grant agreement No. 101073045 (TADFsolutions) and the EPSRC grant EP/X026175/1. H.B. acknowledges financial support of the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 834431).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ITO Top-Electrodes via Industrial-Scale PLD for Efficient Buffer-Layer-Free Semitransparent Perovskite Solar Cells

  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Repecau, Pierre-Alexis
  • Morales-Masis, Monica
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] The deposition of transparent conductive oxides (TCO) usually employs harsh conditions that are frequently harmful to soft/organic underlayers. Herein, successful use of an industrial pulsed laser deposition (PLD) tool to directly deposit indium tin oxide (ITO) films on semitransparent vacuum-deposited perovskite solar cells without damage to the device stack is demonstrated. The morphological, electronic, and optical properties of the PLD deposited ITO films are optimized. A direct relation between the PLD chamber pressure and the solar cell performance is obtained. The semitransparent perovskite solar cells prepared exclusively by vacuum-assisted techniques had fill factors of 78% and exceeded 18% in power conversion efficiencies. This demonstrates that the direct deposition of TCO-based top electrodes without protective buffer layers is possible and leads to efficient devices., The research leading to these results has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant agreement No. 834431). The authors acknowledged support from the Comunitat Valenciana (IDIFEDER/2018/061 and PROMETEU/2020/077), as well as by the Ministry of Science and Innovation (MCIN), and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033, and the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR-2019-CRG8-4093.2). K.P.S.Z. acknowledged funding from Comunitat Valenciana (APOSTD/2021/368). AP acknowledged his Grisolia grant from the Comunitat Valenciana (GRISOLIAP/2020/134). P-A.R. and M.M.M. acknowledged the financial support from the Netherlands Enterprise Agency under contract SOL18001 of the SOLAR ERA NET CUSTCO project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green light-emitting electrochemical cells based on platinum(ii) complexes with a carbazole-appended carbene ligand

  • Fuertes, Sara
  • Mardegan, Lorenzo
  • Martínez, Ignacio
  • Ventura, Silvia
  • Ara, Irene
  • Tordera, Daniel
  • Bolink, Henk J.
  • Sicilia, Violeta
This article is part of the themed collections: Paul R. Raithby at 70: in celebration of a life in chemistry, Recent Open Access Articles and 2022 Journal of Materials Chemistry C Most Popular Articles., Platinum(II) complexes bearing new carbazole-appended cyclometallated N-heterocyclic carbenes such as [Pt(Cbz-C^C*)Cl(NCCH3)](3), [Pt(Cbz-C^C*)Cl(PPh3)](4), [Pt(Cbz-C^C*)(PPh3)(py)]PF6 (py = pyridine, 5), [Pt(Cbz-C^C*)(P^N)]PF6 (P^N = 2-(2-(diphenylphosphino) ethyl) pyridine, 6), and [Pt(Cbz-C^C*)(P^P)]PF6 (P^P: 1,1-bis(diphenylphosphino)methane, dppm 7; 1,2-bis(diphenylphosphino)ethane, dppe, 8, 1,2-bis(diphenylphosphino) benzene, dppbz, 9) have been prepared using a stepwise procedure from 9-(4-bromo-phenyl)-9H-carbazole, imidazole, [{Pt(μ-Cl)(η3-2-Me-C3H4)}2] and the corresponding ancillary ligands. They have been fully characterized. Also, single-crystal X-ray structures, theoretical calculations and photophysical studies have been performed. These complexes have been employed as emitters in simple solution-processed light-emitting electrochemical cells (LECs). When driven under a pulsed current of 50 A m−2, devices based on 7–9 exhibited green emission, a luminance of 265 cd m−2 and a current efficiency of 5.7 cd A−1 (for the best performing emitter, 7). As far as we know, these are the first examples of green-emitting Pt(II)-based LECs., This work was supported by the “Ministerio de Ciencia Innovación y Universidades”/FEDER (Project PGC2018-094749-B-I00) and the Gobierno de Aragón (Grupo E17_20R: Quimica Inorgánica y de los Compuestos Organometálicos). The authors thank the Centro de Supercomputación de Galicia (CESGA) for generous allocation of computational resources. The authors acknowledge support from Comunitat Valenciana (IDIFEDER/2020/063, PROMETEU/2020/077 and CIGE/2021/027), the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program Grant agreement No. 834431 and the Spanish Ministry of Science, Innovation and Universities (MICIU) (RTI2018-095362-A-I00 and EQC2018-004888-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Grain Boundary Passivation Effect of Coevaporated Dopants Enhances the Photoemission of Lead Halide Perovskites

  • Kalluvila Justin, Isabella A.
  • Tiede, David O.
  • Piot, Manuel
  • Forzatti, Michele
  • Roldán-Carmona, Cristina
  • Galisteo-López, Juan F.
  • Míguez, Hernán
  • Bolink, Henk J.
Chemicals and CAS Registry Numbers perovskite 12194-71-7, 61027-03-0, Herein, we demonstrate that coevaporated dopants provide a means to passivate buried interfacial defects occurring at perovskite grain boundaries in evaporated perovskite thin films, thus giving rise to an enhanced photoluminescence. By means of an extensive photophysical characterization, we provide experimental evidence that indicate that the codopant acts mainly at the grain boundaries. They passivate interfacial traps and prevent the formation of photoinduced deep traps. On the other hand, the presence of an excessive amount of organic dopant can lead to a barrier for carrier diffusion. Hence, the passivation process demands a proper balance between the two effects. Our analysis on the role of the dopant, performed under different excitation regimes, permits evaluation of the performance of the material under conditions more adapted to photovoltaic or light emitting applications. In this context, the approach taken herein provides a screening method to evaluate the suitability of a passivating strategy prior to its incorporation into a device., Funded by the European Union. European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No.834431). Financial support from the project TED2021-129679B–C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR is acknowledged. C.R.C acknowledge financial support for grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033. I.A. and D.O.T acknowledge financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956270. Authors acknowledge the Spanish Agencia Estatal de Investigaciones (AEI) for project PID2021-126444OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and the Advanced Materials programme supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/022). H.M. acknlowledges the support from the Junta de Andalucía under grant P18-RT-2291 (FEDER/UE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green light-emitting electrochemical cells based on platinum(II) complexes with a carbazole-appended carbene ligand

  • Fuertes, Sara
  • Mardegan, Lorenzo
  • Martínez, Ignacio
  • Ventura, Silvia
  • Ara, Irene
  • Tordera, Daniel
  • Bolink, Henk J.
  • Sicilia, Violeta
Platinum(II) complexes bearing new carbazole-appended cyclometallated N-heterocyclic carbenes such as [Pt(Cbz-C^C*)Cl(NCCH3)](3), [Pt(Cbz-C^C*)Cl(PPh3)](4), [Pt(Cbz-C^C*)(PPh3)(py)]PF6 (py = pyridine, 5), [Pt(Cbz-C^C*)(P^N)]PF6 (P^N = 2-(2-(diphenylphosphino) ethyl) pyridine, 6), and [Pt(Cbz-C^C*)(P^P)]PF6 (P^P: 1,1-bis(diphenylphosphino)methane, dppm 7; 1,2-bis(diphenylphosphino)ethane, dppe, 8, 1,2-bis(diphenylphosphino) benzene, dppbz, 9) have been prepared using a stepwise procedure from 9-(4-bromo-phenyl)-9H-carbazole, imidazole, [{Pt(μ-Cl)(η3-2-Me-C3H4)}2] and the corresponding ancillary ligands. They have been fully characterized. Also, single-crystal X-ray structures, theoretical calculations and photophysical studies have been performed. These complexes have been employed as emitters in simple solution-processed light-emitting electrochemical cells (LECs). When driven under a pulsed current of 50 A m−2, devices based on 7–9 exhibited green emission, a luminance of 265 cd m−2 and a current efficiency of 5.7 cd A−1 (for the best performing emitter, 7). As far as we know, these are the first examples of green-emitting Pt(II)-based LECs.