Pasar al contenido principal

DISEÑO Y APLICACIONES DE LENTES DIFRACTIVAS ESTRUCTURADAS CON PROFUNDIDAD DE FOCO EXTENDIDA

PID2022-142407NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Focusing performance of Fibonacci tiling-based zone plates

  • Garmendía-Martínez, Adrián
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Furlan, Walter D.
[EN] In this work, we present the Fibonacci Tiling-Based Zone Plates (FTZPs) characterized by a Fibonacci binary array generated using complementary substitution rules applied in both horizontal and vertical directions. The resulting array forms a quasiperiodic structured pattern where each row and column corresponds to a Fibonacci sequence or its Boolean complement. This array defines a transmittance function in a normalized spatial domain, partitioned into rectangulars sub-regions. Unlike conventional Fibonacci zone plates, which feature concentric rings, the FTZP consists of transparent and opaque rectangles, offering unique optical properties advantageous for diffraction-based applications. The intensity distribution along the optical axis and the evolution of transverse diffraction patterns are investigated through both numerical simulation and experimental measurements., This research was funded by grants from the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and the Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-10-24) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplexed vortex beam-based optical tweezers generated with spiral phase mask

  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The design and implementation of a multiplexed spiral phase mask in an experimental optical tweezers setup are presented. This diffractive optical element allows the generation of multiple concentric vortex beams with independent topological charges and without amplitude modulation. The generalization of the phase mask for multiple concentric vortices is also shown. The design for a phase mask of two multiplexed vortices with different topological charges is developed. We experimentally show the transfer of angular momentum to the optically trapped microparticles by enabling nearly independent orbiting dynamics around the optical axis within each vortex. The angular velocity of the confined particles versus the optical power in the focal region is also discussed for different combinations of topological charges., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2019-107391RB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledgment the financial support from the Universitat Politècnica de València (PAID-01-20-25), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shedding Light on Halos: Quantifying the Impact of the Diffractive Profile in Multifocal Intraocular Lenses

  • Martínez-Espert, Anabel
  • Garcia-Delpech, Salvador
  • Furlan, Walter D.
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Purpose: Halos are the most common source of discomfort after implantation of diffractive multifocal intraocular lenses (MIOLs). Although multiple causes are attributed to halos, there is no clear consensus about the specific role of each factor, especially the diffractive profile. This study aims to quantify the isolated effect of the diffractive profile on halo formation using numerical modeling. Methods: A simplified model eye was implemented in Zemax OpticStudio to simulate the optical performance of two different diffractive designs (sinusoidal and apodized kinoform) obtained from commercially available MIOLs. Simulations were performed for three pupil diameters under both monochromatic (green) and polychromatic illumination. To evaluate halo size, the half intensity diameter (HD) metric was used. Results: At the far focus, the kinoform MIOL exhibited a reduction in halo size as the pupil diameter increased. In contrast, the sinusoidal MIOL performed best at the intermediate focus for 6.0 mm, whereas at 3.0 mm and 4.5 mm the HD was nearly three times higher. In both cases, no significant difference was observed between monochromatic and polychromatic illumination. Conclusions: The observed differences in halo formation between the diffractive profiles studied can be primarily attributed to the way each design distributes optical energy across its diffraction orders. Translational Relevance: This study shows that diffractive profile of MIOLs significantly affects halo formation, aiding surgeons in interpreting patient complaints and evaluating lens designs critically. This approach also offers a useful tool for designers to minimize halos in new lenses., Supported by Generalitat Valenciana (CIPROM/2022/30) ; Ministerio de Ciencia e Innovacion (PID2022-142407NB-I00) . A. M.-E. acknowledges financial support from Universitat de Valencia (UV-INV-PREDOC21-1915492) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic testing of the inverse-square law using the infrared signal of a remote control

  • Marín-Sepúlveda, Camila F.
  • Ortuño-Molina, Santiago
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this work, the inverse-square law has been tested for the electromagnetic radiation in the infrared range. As a point-source, a TV remote control has been used. The intensities registered by a solar cell plugged to a speaker have been measured acoustically by recording the sound produced by the infrared pulses. The recorded audio is edited to find the intensities for different distances between the remote control and the solar cell. The results were fitted with a parametric function of the intensity inversely proportional to the distance square. A very good agreement was achieved., This work was supported by the Spanish Ministerio de Ciencia e Innovación (Grant PID2022-142407NB-I00) and by Generalitat Valenciana (Grant CIPROM/2022/30), Spain. The authors would like to thank the Instituto de Ciencias de la Educación (Institute of Education Sciences) at the Universitat Politècnica de València (UPV) for its support to the teaching innovation group MSEL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Theoretically Motivated Dark Electromagnetism as the Origin of Relativistic Modified Newtonian Dynamics

  • Finster, Felix
  • Paganini, Claudio F.
  • Singh, Tajinder P.
  • Isidro, J.M.|||0000-0002-0720-9945
[EN] The present paper is a modest attempt to initiate the research program outlined in this abstract. We propose that general relativity and relativistic MOND (RelMOND) are analogues of broken electroweak symmetry. That is, SU(2)RxU(1)YDEM -> U(1)DEM (DEM stands for dark electromagnetism), and GR is assumed to arise from the broken SU(2)R symmetry and is analogous to the weak force. RelMOND is identified with dark electromagnetism U(1)DEM, which is the remaining unbroken symmetry after the spontaneous symmetry breaking of the dark electro-grav sector SU(2)RxU(1)YDEM. This sector, as well as the electroweak sector, arises from the breaking of an E8xE8 symmetry in a recently proposed model of unification of the standard model with pre-gravitation, with the latter based on an SU(2)R gauge theory. The source charge for the dark electromagnetic force is the square root of mass, motivated by the experimental fact that the ratio of the square roots of the masses of the electron, up-quark, and down-quark is 1:2:3, which is the opposite of the ratio of their electric charges at 3:2:1. The introduction of the dark electromagnetic force helps us understand the peculiar mass ratios of the second and third generations of charged fermions. We also note that in the deep MOND regime, acceleration is proportional to the square root of mass, which motivates us to propose the relativistic U(1)DEM gauge symmetry as the origin of MOND. We explain why the dark electromagnetic force falls inversely with distance, as in MOND, rather than following the inverse square of distance. We conclude that dark electromagnetism effectively mimics cold dark matter, and the two are essentially indistinguishable in cosmological situations where CDM successfully explains observations, such as CMB anisotropies and gravitational lensing., J.M.I. was partially supported by FEDER/MCIN under grant PID2022-142407NB-I00 (Spain)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using a remote control to determine the infrared absorption coefficient in water

  • Ortuño-Molina, Santiago
  • Garmendía-Martínez, Adrián
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this work, we present a simple and low-cost experiment designed to determine the infrared water absorption coefficient. We used a TV remote control as a point source of infrared light. The intensity after passing the light through different heights of a water column is measured with a solar cell connected to a speaker. The recorded signal, captured with a smartphone sound recorder, provides a practical demonstration of the Beer¿Lambert law. The collected data were fitted to the theoretical model, obtaining a very good agreement between the value of the water absorption coefficient obtained experimentally and that reported in the literature., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. The authors thank the Instituto de Ciencias de la Educación (Institute of Education Sciences) at the Universitat Politècnica de València (UPV) for its support to the teaching innovation group MSEL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical twin-vortex multi-trapping by Kolakoski lenses

  • Pérez-Hernández, Arlen Beatriz
  • Garmendía-Martínez, Adrián
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter D.
[EN] In this work, we design and implement a new bifocal diffractive spiral lens within an optical tweezers system. The proposed diffractive optical element coined Kolokaski Kinoform Spiral Lens (KKSL), generates twin optical vortices along the propagation direction. The axial positions, as well as the diameters of the generated vortex beams, are correlated with the Kolakoski aperiodic sequence introduced in the design of the diffractive lens. The unique properties of KKSLs make it ideal for optical trapping applications, allowing independent multiple trapping and particle displacement within each optical vortex beam. We present both the focusing properties of KKSL and the experimental results of its integration into the optical tweezer setup., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. A.G.M. and A.B.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and Universitat Politecnica de Valencia (PAID-01-23), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifocal diffractive lenses based on the aperiodic Kolakoski sequence

  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
[EN] In this work, we present a new family of Zone Plates (ZPs) designed using the self-generating Kolakoski sequence. The focusing and imaging properties of these aperiodic difractive lenses coined Kolakoski Zone Plates (KZPs) are extensively studied. It is shown that under monochromatic planewave illumination, a KZP produces two main foci of the same intensity along the axial axis. Moreover, one of the corresponding focal lengths is double the other, property correlated with the involved aperiodic sequence. This distinctive optical characteristic is experimentally confrmed. We have also obtained the frst images provided by these bifocal new difractive lenses., Tis work was supported by the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. A.G.M acknowledges the fnancial support from rom the Generalitat Valenciana (GRISOLIAP/2021/121), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining Physics and Mathematics Learning: A Taylor Series Analysis of an Oscillating Magnetic Field

  • Ortuño-Molina, S.
  • Garmendía-Martínez, A.
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Garmendía-Martínez, Adrián
[EN] In this work, we present a simple and low-cost experiment designed to study the oscillations of the magnetic field created by a cylindrical magnet under two different conditions: far and short distances from the magnetic sensor. A Taylor s series expansion of the magnetic field function has been done to study the convergence of the polynomial series to the real field in both situations. To carry out the experiment, a small cylindrical magnet has been attached to an oscillating and well-known spring-mass system. The resulting oscillating magnetic field has been registered with the smartphone by using the magnetometer sensor. A very good agreement has been obtained between the theoretical model for the magnetic field and the experimental data collected with the sensor located near and far from a cylindrical magnet and along its longitudinal axis., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio del interferómetro de Michelson mediante un laboratorio virtual, Study of the Michelson interferometer by means of a virtual laboratory

  • Muñoz-Pérez, Francisco M.
  • Ortega Mendoza, J. Gabriel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Interference is a phenomenon of wave physics that occurs when two or more waves overlap. In the case of light, this results in patterns of light and shadow. In this paper, we present a virtual laboratory developed as a graphical user interface (GUI) in Matlab software, which aims to facilitate the study of the interference phenomenon of light for different wavelengths. The main goal is to provide students of Physics and Optics, both at undergraduate and graduate level, with the necessary skills to understand the wave behavior of light through the analysis of the interference pattern generated., [ES] La interferencia es un fenómeno de la física de ondas que se produce cuando dos o más ondas se superponen. En el caso de la interferencia de la luz, esto resulta en patrones de luz y sombra. En este trabajo, presentamos un laboratorio virtual desarrollado como interfaz gráfica de usuario (GUI) en el software Matlab. que tiene como propósito facilitar el estudio del fenómeno de interferencia de la luz para diferentes longitudes de onda. La meta principal es proporcionar a los estudiantes de asignaturas de Física y Óptica, tanto a nivel de pregrado como de grado, las competencias necesarias para comprender el comportamiento ondulatorio de la luz a través del análisis del patrón de interferencia generado., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) y por la Generalitat Valenciana (CIPROM/2022/30). F.M.M.P. también agradece la financiación de la Universitat Politècnica de València (PAID-01-20-25). Este trabajo ha sido desarrollado por el Equipo de Innovación y Calidad Educativa MSEL de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of the aperiodic Mephisto Waltz sequence in the design of diffractive lenses

  • Garmendía-Martínez, Adrián
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Gimenez Palomares, Fernando
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter Daniel
[EN] In this work, we present the design of a new quadrifocal diffractive lens based on the aperiodic Mephisto Waltz sequence. The proposed diffractive optical element (DOE), coined as the Mephisto Waltz Zone Plate (MWZP), allows the formation of four focal planes along the direction of propagation. The optical characteristics of this lens are directly correlated with the properties of the aperiodic sequence used in its design. The focusing properties of the MWZP have been analytically and experimentally studied, demonstrating that they preserve the inherent self-similarity characteristics of the aperiodic sequence. This self-similarity, along with the quadrifocal properties, highlights the potential of the MWZP in advanced optical applications, offering new capabilities in controlling light propagation and focusing., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana, Spain (grant CIPROM/2022/30), Spain. A.G.M. acknowledges the financial support from the Generalitat Valenciana, Spain (GRISOLIAP/2021/121).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectral Analysis of Anomalous Capacitance Measurements in Interleaving Structures: Study of Frequency Distribution in Photomultipliers

  • Milian Sánchez, Víctor
  • Balvis Outeiriño, Eduardo
  • Sahu, Sarira
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Guerra-Carmenate, José
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] This study presents experimental results on capacitance fluctuations in several devices located within an interleaving structure. Specifically, it examines the behavior of the capacitance between the anode and cathode of a photomultiplier, comparing it with the characteristics of the ultra-stable capacitor analyzed in a previous paper via measurements inside and outside a modified Faraday cage. The results cover spectral and correlation analyses both inside and outside the box, confirming differences in the spectrum using the periodograms. In particular, the confidence intervals for the mean capacitance values show significant changes between the two scenarios, from the inside to the outside of the enclosure. In the case of the ultra-stable capacitor, there is an increase from 0.004 to 0.008 nF. On the other hand, a symmetry analysis is conducted for all measurements taken both outside and inside the modified Faraday cage. It is observed that in all cases, there is clear non-symmetric behavior in the data., Miguel E. Iglesias Martínez s work was partially supported by the postdoctoral research scholarship Ayudas para la recualificación del sistema universitario español 2021 2023. Modalidad: Margarita Salas from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU and additionally funded by Ayuda para potenciar la investigación postdoctoral de la UPV (PAID-PD-22) . The work of S.S. is partially supported by DGAPA-UNAM (México) Project No. IN103522. This work was supported by the Spanish Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledges the financial support from the Universitat Politècnica de València (PAID-01- 20-25), Spain. This work was supported by the Spanish government (PID2021-128676OB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dispositivo de metrología óptica para la evaluación cromática de lentes intraoculares

  • Martínez-Espert, Anabel
  • Montagud-Martínez, Diego
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[ES] En este trabajo presentamos un sistema de banco óptico para estudiar la calidad óptica de lentes intraoculares (LIOs). Este sistema, basado en la norma ISO 11979-2, 2014, captura y analiza las imágenes en tiempo real, utilizando diversas condiciones de iluminación y diferentes objetos de prueba. Así se obtienen métricas esenciales como la función de dispersión del punto (PSF-Point Spread Function) y la función de transferencia de modulación (MTF-Modulation Transfer Function). Este método proporciona una evaluación precisa y completa del rendimiento óptico de las LIOs bajo condiciones de luz monocromática y policromática. Así, este sistema contribuye al desarrollo de lentes intraoculares de mayor calidad, que satisfacen mejor las necesidades de los pacientes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-trap optical tweezers based on kinoform Silver Mean lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this paper, we present the design and implementation of multi-trap optical tweezers based on new quadrifocal kinoform lenses. The phase distribution of these diffractive lenses is characterized by the Silver Mean sequence. The focusing properties of the resulting aperiodic DOEs coined Kinoform Silver Mean Lenses (KSMLs) are numerically examined. It is shown that, under monochromatic illumination, a KSML drives most of the incoming light into four single foci whose focal lengths are related to the Silver ratio. In this way, a KSML improves the diffraction efficiency of binary Fresnel Silver Mean Zone Plates. Through experimental results, the simultaneous trapping of particles in the four focal planes and their three-dimensional manipulation is demonstrated., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-01-20-25) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polychromatic focusing and imaging properties of tunable multifocal binary Gabor zone plates

  • Garmendía-Martínez, Adrián
  • Gimenez Palomares, Fernando
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Furlan, Walter Daniel
[EN] In this paper, we introduce tunable binary multifocal Gabor zone plates (TBGZPs) as a novel family of diffractive amplitude lenses designed to create a desired multi-focal distribution. TBGZPs are conceived as a combination of several binary Gabor zone plates with different harmonic terms. We show how this combination can be tailored in the lens design intended to produce multiple foci with tunable intensity and focal lengths. Several examples are presented and evaluated numerically and experimentally. In particular, we introduce a new trifocal binary Gabor zone plate that, under polychromatic illumination, presents an extended depth of focus with low chromatic aberration., This work was supported by the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and by Generalitat Valenciana, Spain (grant CIPROM/2022/30), Spain. A.G.M acknowledges the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Big science in Latin America: accelerate particles and progress

  • Castaño, Víctor M.
  • Violini, Galileo
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] Large scientific facilities do more than just deliver breakthroughs ¿ they build capacity. Regions that host them benefit from the creation of jobs and skills as well as infrastructures, from computing to electricity and transport. The benefits can be especially great for advanced light sources, which generate intense beams of light for a range of uses in academia and industry., This publication has been funded by the Spanish government via R&D projects PID2021-125927NB-C21, PID2021-128676OB-I00 and PID2022-142407NB-I00
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generalized Chi distribution for non-integer degrees of freedom in modelling biological collectivities

  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • González-Cortés, Álvaro|||0009-0001-2328-2173
  • Isidro, J.M.|||0000-0002-0720-9945
  • Noverques-Medina, Aina|||0000-0002-7810-0381
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Orellana-Panchame, Marcos Fabricio
  • Sahu, Saira
[EN] This article aims to expand the practical potential of the Chi and Chi-square distributions by extending their applicability to non-integer degrees of freedom, k. The study has two main objectives: first, to explore and leverage the relationship between the Chi, Chi-square, and Gamma distributions to interpret non-integer degrees of freedom; and second, to apply this framework to real survival-time data in the context of biological and health sciences. Three specific cases are analyzed: the germination times of Pinus tropicalis Morelet seeds cultivated in western Cuba; the interval between infection by virulent tuberculous bacilli and death from tuberculosis in guinea pigs; and the period from the onset of symptoms to death due to COVID-19 in patients in Mexico during 2020. A parameter estimation was performed by maximum likelihood (MLE), and the optimal value of k was found to be non-integer in all cases., We would like to acknowledge funding from the Generalitat Valenciana (Spain) through the PROMETEO CIPROM/2023/32 grant, and from the Agencia Estatal de Investigacion (Spain) through ¿the PID2022-142407NB-I00 and PID2024-162480OB-I00 grants. The work of S.S. is partially supported by DGAPA-UNAM (Mexico) Project No. IN103522. The author A.G.C. was supported ¿ by a contract of the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-24), Universitat ¿Politecnica de Val ` encia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visualizing acoustic levitation with COMSOL multiphysics and a simple experimental setup

  • Muñoz-Pérez, Francisco Misael
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Gimenez Valentin, Marcos Herminio
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We present a new virtual laboratory developed with COMSOL multiphysics for the simulation of an acoustic levitator, as well as a three¿dimensional (3D) printed experimental setup. Our software application simulates the acoustic pressure field and its interaction with a set of particles. Students can interact with the system having the possibility to change the frequency and distance parameters between transducers in real time. We have also developed and shared for free use the 3D printing design files for the construction of the necessary components for the acoustic levitator, as well as the instructions for its experimental implementation. The experimental results are contrasted, along with those from the virtual laboratory, providing students with useful tools to understand and interpret the acoustic phenomenon in question., Generalitat Valenciana, Grant/Award Number: CIPROM/2022/30; Ministerio de Ciencia e Innovación, Grant/Award Number: PID2022‐142407NB‐I00 The authors would like to thank the Instituto de Ciencia de la Educación (Institute of Education Sciences) at the Universitat Politècnica de València (Technical University of Valencia), Spain, for its support to the teaching innovation group MSEL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A diffraction approach to assess the elastic properties of a nylon string

  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Garmendía-Martínez, Adrián
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The Young¿s modulus of a nylon string has been determined experimentally by combining elasticity theory and wave optics. A diffraction experiment has been setup to determine the change in the string diameter for different tensile forces applied by means of hanging weights. A linear elasticity model has been used to calculate the Young¿s modulus. A simple method has been provided which could be used as the basis of an experiment for introductory university level., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022 142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. The authors would like to thank the Instituto de Ciencias de la Educación (Institute of Education Sciences) at the Universitat Politècnica de València (Technical University of Valencia), Spain, for its support to the teaching innovation group MSEL
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comparison of Supervised Machine Learning Algorithms for Defective Pixel Detection

  • López-Portilla, Bárbaro M.
  • Balzer, Kristian
  • Carballo, Lorena
  • Figueroa, Miguel
  • Peset Mancebo, María Fernanda|||0000-0003-3706-6532
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] Detecting defective pixels in CMOS Image Sensors is a critical task for ensuring high-quality image acquisition, as even minor defects can significantly degrade performance in vision systems and downstream processing. This study evaluates the performance of several supervised machine learning algorithms for defective pixel detection using 300 grayscale images of 512 × 512 pixels from the publicly available TAMPERE17 dataset, in which dead and hot pixels were randomly introduced. The evaluated algorithms include k-Nearest Neighbors (kNN), Naïve Bayes, Decision Tree, Random Forest, Support Vector Machine (SVM), and Multilayer Perceptron. Performance was assessed using specificity, recall, precision, and the phi coefficient. A sensitivity analysis was additionally performed using neighborhood windows of 3 × 3, 5 × 5, and 7 × 7 pixels during feature extraction. The results showed that the neighborhood size has a noticeable impact on classification performance, with the best overall results obtained using an SVM classifier with an RBF kernel and a 3 × 3 feature extraction window. This configuration achieved a phi coefficient of 98.08%, together with a specificity of 99.00%, a recall of 99.00%, and a precision of 99.02%. Statistical analysis further indicated that SVM (RBF) and Multilayer Perceptron exhibited statistically comparable performance under the evaluated experimental conditions. The analysis further revealed that defective pixels are primarily characterized by highly local intensity variations, while larger neighborhoods do not necessarily improve classification performance. Compared with previously reported defective pixel detection methods, the proposed approach achieved highly competitive results and the highest phi coefficient among the evaluated methods. Additionally, the impact of defective pixel detection on image quality was assessed using a simple median filter correction stage and evaluated through Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index Measure (SSIM). The best-performing configuration achieved a PSNR of 40.96 dB and an SSIM of 98.68% after median filter correction, demonstrating substantial improvement over median filtering alone, although the resulting image quality remains below that of the best-performing state-of-the-art correction methods. The proposed framework provides reproducible reference results for evaluating supervised machine learning approaches to defective pixel detection while analyzing the influence of feature extraction window size on classification performance and reconstructed image quality, The authors would like to thank the Departamento de Procesos Industriales, Facultad de Ingeniería, Universidad Católica de Temuco, for providing the infrastructure and institutional support that made this work possible. Miguel Figueroa acknowledges the support of the Chilean National Agency for Research and Development (ANID) through Centers for Applied Research CIA250006 and Specific Thematic Research Team Projects ATE250003. Pedro Fernández de Córdoba gratefully acknowledges the support of the Generalitat Valenciana (Spain) through the PROMETEO grant CIPROM/2023/32 and the Agencia Estatal de Investigación (Spain) through projects PID2022-142407NB-I00 and PID2024-162480OB-I00. Miguel E. Iglesias Martínez s research was supported by the postdoctoral research grant Subvenciones para la contratación de personal investigador en fase postdoctoral APOSTD/2025 (MODALIDAD A), funded by the Conselleria de Educación, Cultura, Universidades y Empleo of the Generalitat Valenciana (Reference CIAPOS/2024/238) and co-funded by the European Social Fund Plus (FSE+) through the 2021 2027 Operational Program of the Comunitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical Trapping by Aperiodic Kinoform Lenses Based on the Baum-Sweet Sequence

  • Pérez-Hernández, Arlen Beatriz
  • Garmendía-Martínez, Adrián
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Furlan, Walter D.
  • Muñoz-Perez, Francisco M.
[EN] This work presents a new family of aperiodic diffractive lenses based on the Baum-Sweet sequence. To the best of our knowledge, this is the first report of a diffractive lens derived from this sequence. The study of their focusing properties reveals two focal points with similar intensities along the optical axis. Both the main focal distances and the axial irradiance distribution are correlated with the aperiodic Baum-Sweet sequence. An approximate 60% increase in diffraction efficiency is observed when employing kinoform profiles instead of binary phase lenses. The integration of the Baum-Sweet-based kinoform lens into an optical tweezers system demonstrates its ability to simultaneously trap multiple particles at two distinct focal planes, highlighting its potential for applications in more advanced optical devices., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reliability of Prediction Models for the Functional Classification of a Sinusoidal Intraocular Lens Depending on Pupil Diameter

  • Montagud-Martínez, Diego
  • Furlan, Walter D.
  • Rodríguez-Vallejo, Manuel
  • Fernández, Joaquín
  • Ferrando, Vicente|||0000-0002-7434-7109
[EN] To assess the agreement among prediction models for the functional classification of intraocular lenses (IOLs) and discuss their limitations in evaluating pupil dependency of a sinusoidal IOL. Methods: An ISO-compliant optical bench setup with modifications to characterize the modulation transfer function area (MTFa) across pupil diameters from 1.5 to 5.5 mm was used to measure the Acriva Trinova Pro C Pupil Adaptive IOL. Six prediction models (Vega et al., 2018, Fernández et al., 2019, Alarcón et al., 2016, Armengol et al., 2020 were applied to estimate visual acuity defocus curves from MTFa and functional classification based on the depth-of-field (DOFi) and the increase in visual acuity (¿VA) from intermediate to near. Results: Defocus curves for all prediction models consistently demonstrated a Full-DOFi response (>2.3 D at 0.2 logMAR), with differences in ¿VA emerging across pupil diameters. Continuous decreases (¿VA < 0.05 logMAR) were observed at pupil diameters <2.5 mm, while Smooth transitions (¿VA from 0.05 to 0.14 logMAR) occurred between 2.5-3.0 mm for all models except for Vega. At pupil diameters >3.5 mm, most models transitioned to a Steep classification (¿VA ¿ 0.14 logMAR), except Fernández, which remained Smooth, and Armengol 2020a, which shifted to Steep at 4.0 mm. Conclusions: Visual acuity prediction models provide useful means of reporting optical bench data in clinically familiar metrics. However, outcomes should be interpreted with caution as functional classifications can vary depending on the optical bench setup and prediction model used., D.M.-M., W.D.F., V.F. were funded by Ministerio de Ciencia e Innovacion (PID2022-142407NB-I00); Generalitat Valenciana (CIPROM/2022/30).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fractal Checkerboard Zone Plates

  • Garmendía-Martínez, Adrián
  • Pérez-Hernández, Arlen Beatriz
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter D.
[EN] In this work, we introduce a novel diffractive optical element, the Fractal Checkerboard Zone Plate (FCZP). It is based on a two-dimensional binary matrix generated through iterative substitution rules that produce self-similar fractal geometries. Starting from a seed matrix, higher-order structures are constructed iteratively, defining the transmittance pattern of the lens with transparent and opaque rectangular regions. The axial irradiance distributions of FCZPs of various orders are analyzed and compared to those of equivalent periodic checkerboard zone plates (PCZPs). Although both exhibit a primary focal distance at the same position, FCZPs display intensity profiles with self-similar characteristics typical of diffractive fractal structures. Moreover, compared to other square fractal lenses, FCZPs offer higher relative diffraction efficiency., This work was supported by the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-I00), by Generalitat Valenciana (grant CIPROM/2022/30), Spain, and by Universitat Politècnica de València, Spain (grant PAID-06-23). A.G.M. and A.B.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and Universitat Politècnica de València (PAID-01-23), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silver mean sequence in extended depth of focus intraocular lenses: a comparative study of kinoform and stepwise designs

  • Martínez-Espert, Anabel
  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this work, we present two new multifocal intraocular lens (MIOL) designs, both based on the silver mean kinoform diffractive lens. We demonstrate that a single aperiodic diffractive profile can be used to create two different MIOLs: one with a kinoform structure and the other with a stepwise profile. Quantitative assessment of the designs was carried out using the through focus modulation transfer function and the area under the modulation transfer function for the prediction of their visual performance. Our results show that both designs exhibit nearly identical optical performance at the design wavelength (lambda = 550 nm), though their intrinsic longitudinal chromatic aberration differs significantly. Given that diffractive extended depth of focus (EDoF) intraocular lenses are prone to image degradation due to dysphotopic phenomena, we also compared the halos generated by these two designs and found notable differences in their behavior. Furthermore, under photopic conditions, the proposed lens designs demonstrated the potential to achieve visual acuity values of 0.2 logMAR or better across a vergence range from approximately 0 to 2 D. Finally, to qualitatively assess the behavior of the MIOLs, an objective experimental evaluation was conducted using an adaptive optics visual simulator in a model eye. Experimental results align with the quantitative assessment of the proposed designs., Generalitat Valenciana (CIPROM/2022/30) ; Ministerio de Ciencia e Innovacion (PID2022-142407NB-I00) ; Universitat de Valencia (UV-INV-PREDOC21-1915492).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Higher-Order Spectral Analysis and Artificial Intelligence for Diagnosing Faults in Electrical Machines: An Overview

  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] Fault diagnosis in electrical machines is a cornerstone of operational reliability and cost-effective maintenance strategies. This review provides a comprehensive exploration of the integration of higher-order spectral analysis (HOSA) techniques¿such as a bispectrum, spectral kurtosis, and multifractal wavelet analysis¿with advanced artificial intelligence (AI) methodologies, including deep learning, clustering algorithms, Transformer models, and transfer learning. The synergy between HOSA¿s robustness in noisy and transient environments and AI¿s automation of complex classifications has significantly advanced fault diagnosis in synchronous and DC motors. The novelty of this work lies in its detailed examination of the latest AI advancements, and the hybrid framework combining HOSA-derived features with AI techniques. The proposed approaches address challenges such as computational efficiency and scalability for industrial-scale applications, while offering innovative solutions for predictive maintenance. By leveraging these hybrid methodologies, the work charts a transformative path for improving the reliability and adaptability of industrial-grade electrical machine systems., Miguel E. Iglesias Martinez's research was supported by a postdoctoral research scholarship titled 'Ayudas para la Recualificacion del Sistema Universitario Espanol 2021-2023, Modalidad: Margarita Salas', funded by the UPV, Ministerio de Universidades, Plan de Recuperacion, Transformacion y Resiliencia, Spain, and made possible by the European Union Next Generation EU. P.F.d.C. acknowledges partial support from the Spanish government via projects PID2021-128676OBI00 and PID2022-142407NB-I00 (Agencia Estatal de Investigacion) and from the Generalitat Valenciana (Spain) through the PROMETEO CIPROM/2023/32 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Impact of Thermal Coating Paints on Indoor Temperature and Energy Efficiency in Colombian Caribbean Homes

  • Florez-Montes, Frank
  • Martínez-Lengua, Antonio
  • Taborda-Giraldo, John Alexander
  • Balvís, Eduardo
  • Selvas-Aguilar, Romeo J.
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Peset Mancebo, María Fernanda|||0000-0003-3706-6532
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] Thermal coating paints offer a passive strategy to reduce heat gain in buildings, improve ventilation, and lower energy consumption. This study investigates the effectiveness of these technologies by comparing different housing structures and environmental conditions. Specifically, it examines thermal envelope solutions for cool roofs in homes along the Colombian Caribbean Coast. We quantify the thermal impacts using experimental data collected from 120 houses across eight municipalities in the Magdalena Department, Colombia. The research details the technology and analytical methods employed, focusing on thermal reductions achieved through thermal coatings to potentially reduce energy demand. A comprehensive measurement system, incorporating temperature and humidity sensors, is developed to assess the impact of the coatings. Thermal comfort is evaluated according to the ASHRAE 55 standard, with temperature reductions calculated for each house treated with thermal coatings. A methodology is applied to evaluate the thermal reduction between a house with a coating solution versus a house without it. The results show a temperature reduction on a house-by-house basis, from 1.5% to 16%. On average, the results yield a significant 7% reduction in thermal load. Additionally, a mobile application is developed to disseminate the results of this research, promoting the social appropriation of science among the involved communities., This study is part of the results derived from the project "Investigacion de los efectos de la variabilidad climatica y el cambio climatico sobre el recurso hidrico, biodiversidad y actividades agropecuarias en el Departamento del Magdalena", funded by Fondo de CTeI (Sistema General de Regalias, SGR)-MinCiencias (Colombia). Miguel E. Iglesias Martinez's work was partially supported by the postdoctoral research scholarship "Ayudas para la recualificacion del sistema universitario espanol 2021-2023. Modalidad: Margarita Salas" from the Ministerio de Universidades, Spain, funded by the European Union Next Generation EU. Fernanda Peset works under the umbrella of the grant "Stable methodologies to evaluate and measure quality, interoperability, blockchain and reuse of open data in the agricultural field" PID2019-105708RB-C21 funded by MCIN/AEI/10.13039/501100011033. Pedro Fernandez de Cordoba's work was partially supported by the Spanish government through the R&D projects PID2021-128676OB-I00 and PID2022-142407NBI00, as well as by the project "Foresight and futures analysis of agricultural products from the Huerta of the Valencia Region", funded by the Excellence Research Groups Program of the Generalitat Valenciana, PROMETEO CIPROM/2023/32. Juan Carlos Castro Palacio and Juan A. Monsoriu were partially supported by the Spanish government through the R&D project PID2022-142407NB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visualizing beat phenomenon between two amplitude-modulated light beams on a solar cell using smartphones

  • Ortuño-Molina, Santiago
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The beat phenomenon arises when two harmonic oscillations of slightly different frequencies (f1 and f2) are superimposed. This phenomenon has been extensively exemplified in physics teaching journals for different contexts. For instance, the acoustic beats between sound waves have been studied with tuning forks, conventional speakers3 and microphones, and, more recently, smartphones. Likewise, the mechanical beat has been studied using a spring-mass system or a pendulum. The beat can also be visualized on the oscilloscope screen by superimposing electrical signals. In relation to light waves, there are also reported works in the literature. More exotic cases are, for instance, the ¿beating¿ phenomenon in the oscillation of the synodic period of the Moon or the beats displayed with foam packing., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (grant PID2022- 142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. The authors thank the Instituto de Ciencia de la Educacion (Institute of Education Sciences) at the Universitat Politecnica de Valencia (Technical University of Valencia), Spain, for its support of the teaching innovation group MSEL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cavity formation dynamics in gold nanoparticles (10-50 nm) upon femtosecond laser irradiation

  • Khammar, Behnoush
  • Fernández-Lima, Francisco
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
[EN] The geometric parameters of nanoparticles can be modified and controlled through irradiation with femtosecond laser pulses at the localized surface plasmon resonance (LSPR). Previous work has shown that under specific conditions of laser fluence, pulse duration, particle size, and the thermal properties of the solvent, hollow gold nanospheres can form when solid gold nanospheres are irradiated. In this article, we explore these conditions for a range of nanoparticle sizes (10-50 nm) of practical interest towards applications in an aqueous solvent using molecular dynamics simulations. Laser energy deposition is simulated by heating the particle from 300 K to 3000 K, followed by cooling to room temperature using a Langevin thermostat, which mimics an implicit solvent. We investigate the structural dynamics of the particle during both heating and cooling processes upon irradiation with a single femtosecond laser pulse. Our results indicate that an in silico methodology can be established to guide the synthesis of nanoparticles with tailored geometric properties. We analyse the aspect ratio, cavity size, and relative size changes both at the final state and throughout the dynamic process. Our findings contribute to efforts towards supporting applications in energy, environmental, and biomedical fields., This work was partially supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades (grants PID2022-142407NB-I00 and PID2021-128676OB-I00), by Generalitat Valenciana (grants CIPROM/2022/30 and CIPROM/2023/32), Spain, and by the Universitat Politecnica de Valencia, Spain (grant PAID-06-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visual performance of a new trifocal intraocular lens design evaluated with a clinical adaptative optics visual simulator

  • Martínez-Espert, Anabel
  • Montagud-Martínez, Diego
  • Garcia-Delpech, Salvador
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Objective: The digital transformation of daily routines has increased visual demands, especially at intermediate and near distances. The Devil multifocal intraocular lens (MIOL) design was developed to enhance intermediate visual performance. This design is a novel trifocal intraocular lens inspired by the fractal structure known as the 'Devil's staircase'. The aim of this research is to evaluate the visual performance of the Devil MIOL design in real patients. Methods: The visual acuity defocus curve was obtained from 25 eyes of healthy volunteers using the Visual Adaptive Optics Simulator (VAO, Voptica SL, Murcia, Spain). Additionally, images of optotypes simulating those seen through the Devil MIOL design were captured to qualitatively illustrate optotype perception at different vergence values. Results: Mean visual acuity values of the evaluation were 0.03 logMAR at 0.00 D vergence, 0.10 logMAR at +1.50 D vergence, and 0.11 logMAR at +3.00 D vergence, corresponding to far (optical infinity), intermediate (66.7 cm), and near foci (33.3 cm), respectively. The experimental outcomes were indeed slightly better than numerical results obtained previously in a model eye. Conclusions: The Devil MIOL design provides satisfactory visual acuity across three primary foci and produces extended depth of focus between the intermediate and near foci., This work was supported by Ministerio de Ciencia e Innovacion (PID2022-142407NB-I00); and Generalitat Valenciana (CIPROM/2022/30). A. M.-E. acknowledges financial support from Universitat de Valencia programa Atracciode Talent 2021 (UV-INV-PREDOC21-1915492). D. M.-M. also acknowledges the Margarita Salas grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aperiodic order and Fraunhofer diffraction in one-dimensional Silver Mean gratings

  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Sánchez-Ortiga, Emilio|||0000-0001-5524-5302
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Oliva-Macías, M. L.
  • Padilla-Vivanco, A.
[EN] We study the Fraunhofer diffraction produced by one-dimensional binary gratings based on the Silver Mean sequence, a deterministic aperiodic ordering closely related to the Pell numbers and the silver ratio. Analytical expressions for the diffraction patterns are derived within the scalar approximation, revealing a characteristic redistribution of diffracted energy and the splitting of the first diffraction orders into multiple well-defined maxima. We show that the transverse positions of these maxima are governed by simple combinations of Pell numbers, reflecting the scaling properties of the underlying aperiodic structure. The theoretical predictions are experimentally verified using a simple optical setup based on a spatial light modulator, which can be readily implemented in undergraduate teaching laboratories. These gratings provide an accessible and pedagogically valuable extension of diffraction experiments based on periodic, fractal and Fibonacci-type structures, allowing students to explore the optical consequences of deterministic aperiodic order through direct observation of their diffraction patterns., This work was supported by the Ministerio de Ciencia e Innovacion (Grant PID2022-142407NB-100), the Generalitat Valenciana (Grant CIPROM/2022/30), and the Universitat Politecnica de Valencia (PIME/23-24/374, and PIME/25-26/578), Spain. The authors also thank the Institute of Education Sciences, Universitat Politecnica de Valencia (Spain), for its support of the Educational Innovation and Quality Team SmartSTEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generating Interactive Smartphone Physics Laboratories Using Artificial Intelligence

  • Suñer Martinez, Josep Lluis
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We present an AI-generated, browser-based interactive laboratory tool designed to support experimental physics education on smartphones and personal computers. The application, produced entirely via conversational prompts to the Claude AI assistant (Anthropic), implements a dual-channel sine-wave generator (0¿2000 Hz) and a real-time microphone waveform visualiser within a single HTML file that requires no installation. The Web Audio API, embedded in all modern browsers, provides low-latency audio synthesis and time-domain analysis at sampling rates up to 48 kHz, making the tool functionally comparable to dedicated hardware signal generators and oscilloscopes. We exemplify its use through the acoustic beat phenomenon: two smartphones are deployed simultaneously, one running the generator and one running the visualiser, allowing a classical two-source interference experiment to be reproduced with no additional equipment. Beat frequencies measured for the pairs (400, 450) Hz and (1000, 1050) Hz agree with theoretical predictions to within 1%, demonstrating a level of accuracy suitable for introductory university physics laboratories. The application exports data as CSV files and screen captures as PNG images, enabling quantitative analysis with standard software. The workflow for generating such a tool through AI prompting is described in detail, providing educators with a replicable template for creating custom, zero-cost browser-based physics laboratories., This work was supported by the Ministerio de Ciencia e Innovación (Grant PID2022- 142407NB-100), the Generalitat Valenciana (Grant CIPROM/2022/30), and the Universitat Politècnica de València (Grants PIME/23-24/374 and PIME/25-26/578), Spain. The authors also thank the Institute of Education Sciences, Universitat Politècnica de València (Spain), for its support of the Teaching Innovation Group EICE SmartSTEM.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessing the impact of thermal coating paints on indoor temperature and energy efficiency in colombian caribbean homes

  • Florez Montes, Frank
  • Martínez Lengua, Antonio
  • Iglesias Martínez, Miguel Enrique
  • Taborda Giraldo, John Alexander
  • Balvís Outeiriño, Eduardo
  • Peset, Fernanda
  • Selvas Aguilar, Romeo J.
  • Castro Palacio, Juan Carlos
  • Monsoriu, Juan Antonio
  • Fernández de Córdoba, Pedro
Thermal coating paints offer a passive strategy to reduce heat gain in buildings, improve ventilation, and lower energy consumption. This study investigates the effectiveness of these technologies by comparing different housing structures and environmental conditions. Specifically, it examines thermal envelope solutions for cool roofs in homes along the Colombian Caribbean Coast. We quantify the thermal impacts using experimental data collected from 120 houses across eight municipalities in the Magdalena Department, Colombia. The research details the technology and analytical methods employed, focusing on thermal reductions achieved through thermal coatings to potentially reduce energy demand. A comprehensive measurement system, incorporating temperature and humidity sensors, is developed to assess the impact of the coatings. Thermal comfort is evaluated according to the ASHRAE 55 standard, with temperature reductions calculated for each house treated with thermal coatings. A methodology is applied to evaluate the thermal reduction between a house with a coating solution versus a house without it. The results show a temperature reduction on a house-by-house basis, from 1.5% to 16%. On average, the results yield a significant 7% reduction in thermal load. Additionally, a mobile application is developed to disseminate the results of this research, promoting the social appropriation of science among the involved communities., Ministerio de Universidades, Agencia Estatal de Investigación | Ref. PID2019-105708RB-C21, Agencia Estatal de Investigación | Ref. PID2021-128676OB-I00, Agencia Estatal de Investigación | Ref. PID2022-142407NB-I00, Generalitat Valenciana | Ref. CIPROM/2023/32
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Spectral analysis of anomalous capacitance measurements in interleaving structures: study of frequency distribution in photomultipliers

  • Milián Sánchez, Víctor
  • Iglesias Martínez, Miguel Enrique
  • Guerra Carmenate, José
  • Castro Palacio, Juan Carlos
  • Balvís Outeiriño, Eduardo
  • Fernández de Córdoba, Pedro
  • Muñoz-Pérez, Francisco Misael
  • Monsoriu, Juan Antonio
  • Sahu, Sarira
This study presents experimental results on capacitance fluctuations in several devices located within an interleaving structure. Specifically, it examines the behavior of the capacitance between the anode and cathode of a photomultiplier, comparing it with the characteristics of the ultra-stable capacitor analyzed in via measurements inside and outside a modified Faraday cage. The results cover spectral and correlation analyses both inside and outside the box, confirming differences in the spectrum using the periodograms. In particular, the confidence intervals for the mean capacitance values show significant changes between the two scenarios, from the inside to the outside of the enclosure. In the case of the ultra-stable capacitor, there is an increase from 0.004 to 0.008 nF. On the other hand, a symmetry analysis is conducted for all measurements taken both outside and inside the modified Faraday cage. It is observed that in all cases, there is clear non-symmetric behavior in the data., Agencia Estatal de Investigación | Ref. PID2021-128676OB-I00, Agencia Estatal de Investigación | Ref. PID2022-142407NB-I00, Generalitat Valenciana | Ref. CIPROM/2022/30
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of aperiodic diffractive intraocular lenses by two-photon polymerization-based laser direct writing

  • Martínez-Espert, Anabel
  • Kyriazis, Athanasios
  • Van Erps, Jürgen
  • Furlan, Walter D.
  • Pérez Merino, Pablo
14 pages, 10 figures, 2 tables, This study demonstrates the fabrication and characterization of an aperiodic diffractive intraocular lens (IOL) prototype based on the Devil’s staircase function, using two-photon polymerization (2PP). The surface profile was quantified using an optical profilometer. Through-focus modulation transfer function (TF-MTF) and the area under the modulation transfer function (MTFa) were measured on a custom optical bench. Optical simulations were performed to model the expected performance. The fabricated prototype shows that the aperiodic stepwise profile is reproduced with micron-level lateral accuracy (average base-width deviation <6.55μm) and submicron step-height accuracy (step height error: <20nm) across the 6-mm optical zone. The measured TF-MTF and MTFa match the predicted trifocal optical performance, exhibiting distinct focal peaks at far (0.0 D), intermediate (+1.75D), and near (+3.6D). These findings demonstrate the promising potential of 2PP for the rapid and precise prototyping of aperiodic diffractive IOL designs., This work received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie (Grant No. 101028137), and from the Ramón y Cajal Fellowship (Grant No. RYC2022-038363-I) (Ministerio de Ciencia, Gobierno de España), awarded to PPM. A.M-E and W.D.F acknowledge the financial support by the Spanish Ministerio de Ciencia e Innovación (Grant No. PID2022-142407NB-I00) and by Generalitat Valenciana (Grant No. CIPROM/2022/30), and A. M-E. acknowledges the financial support from Universitat de València (Grant No. UV-INV-PREDOC21-1915492). ChatGPT was used to support grammar review of the text during manuscript preparation., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-toric optical element to compensate ocular astigmatism with increased tolerance under rotation

  • Gargallo, Diana
  • Martínez-Espert, Anabel
  • Perches, Sara
  • Collados, M. Victoria
  • Remón Martín, Laura
  • Ares, Jorge
A new, to the best of our knowledge, optical element designed to compensate regular astigmatism while exhibiting increased tolerance to rotational misalignment is introduced. The element incorporates an optical design based on concentric annular regions with slightly different cylindrical axis angular positions. To assess visual quality performance as a function of rotation, retinal image simulation and clinical assessments with an adaptive optics visual simulator were carried out. The results demonstrate the superior performance of the newly proposed element in the presence of rotational errors when compared to traditional solutions.