Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplexed vortex beam-based optical tweezers generated with spiral phase mask

  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The design and implementation of a multiplexed spiral phase mask in an experimental optical tweezers setup are presented. This diffractive optical element allows the generation of multiple concentric vortex beams with independent topological charges and without amplitude modulation. The generalization of the phase mask for multiple concentric vortices is also shown. The design for a phase mask of two multiplexed vortices with different topological charges is developed. We experimentally show the transfer of angular momentum to the optically trapped microparticles by enabling nearly independent orbiting dynamics around the optical axis within each vortex. The angular velocity of the confined particles versus the optical power in the focal region is also discussed for different combinations of topological charges., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2019-107391RB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledgment the financial support from the Universitat Politècnica de València (PAID-01-20-25), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio del interferómetro de Michelson mediante un laboratorio virtual, Study of the Michelson interferometer by means of a virtual laboratory

  • Muñoz-Pérez, Francisco M.
  • Ortega Mendoza, J. Gabriel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Interference is a phenomenon of wave physics that occurs when two or more waves overlap. In the case of light, this results in patterns of light and shadow. In this paper, we present a virtual laboratory developed as a graphical user interface (GUI) in Matlab software, which aims to facilitate the study of the interference phenomenon of light for different wavelengths. The main goal is to provide students of Physics and Optics, both at undergraduate and graduate level, with the necessary skills to understand the wave behavior of light through the analysis of the interference pattern generated., [ES] La interferencia es un fenómeno de la física de ondas que se produce cuando dos o más ondas se superponen. En el caso de la interferencia de la luz, esto resulta en patrones de luz y sombra. En este trabajo, presentamos un laboratorio virtual desarrollado como interfaz gráfica de usuario (GUI) en el software Matlab. que tiene como propósito facilitar el estudio del fenómeno de interferencia de la luz para diferentes longitudes de onda. La meta principal es proporcionar a los estudiantes de asignaturas de Física y Óptica, tanto a nivel de pregrado como de grado, las competencias necesarias para comprender el comportamiento ondulatorio de la luz a través del análisis del patrón de interferencia generado., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) y por la Generalitat Valenciana (CIPROM/2022/30). F.M.M.P. también agradece la financiación de la Universitat Politècnica de València (PAID-01-20-25). Este trabajo ha sido desarrollado por el Equipo de Innovación y Calidad Educativa MSEL de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectral Analysis of Anomalous Capacitance Measurements in Interleaving Structures: Study of Frequency Distribution in Photomultipliers

  • Milian Sánchez, Víctor
  • Balvis Outeiriño, Eduardo
  • Sahu, Sarira
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Guerra-Carmenate, José
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] This study presents experimental results on capacitance fluctuations in several devices located within an interleaving structure. Specifically, it examines the behavior of the capacitance between the anode and cathode of a photomultiplier, comparing it with the characteristics of the ultra-stable capacitor analyzed in a previous paper via measurements inside and outside a modified Faraday cage. The results cover spectral and correlation analyses both inside and outside the box, confirming differences in the spectrum using the periodograms. In particular, the confidence intervals for the mean capacitance values show significant changes between the two scenarios, from the inside to the outside of the enclosure. In the case of the ultra-stable capacitor, there is an increase from 0.004 to 0.008 nF. On the other hand, a symmetry analysis is conducted for all measurements taken both outside and inside the modified Faraday cage. It is observed that in all cases, there is clear non-symmetric behavior in the data., Miguel E. Iglesias Martínez s work was partially supported by the postdoctoral research scholarship Ayudas para la recualificación del sistema universitario español 2021 2023. Modalidad: Margarita Salas from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU and additionally funded by Ayuda para potenciar la investigación postdoctoral de la UPV (PAID-PD-22) . The work of S.S. is partially supported by DGAPA-UNAM (México) Project No. IN103522. This work was supported by the Spanish Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledges the financial support from the Universitat Politècnica de València (PAID-01- 20-25), Spain. This work was supported by the Spanish government (PID2021-128676OB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Study of Numerical Methods for Solving the Fresnel Integral in Aperiodic Diffractive Lenses

  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Gimenez Palomares, Fernando
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
[EN] In this work, we present a comparative analysis of different numerical methods to obtain the focusing properties of the zone plates based on Fibonacci and Cantor sequences. The Fresnel approximation was solved numerically in order to obtain the axial irradiance provided by these diffractive lenses. Two different methods were applied. The first one is based on numerical integration, specifically the Simpson integration method and the two-dimensional Gaussian quadrature. The second consisted in the implementation of the Fast Fourier Transform in both one and two dimensions. The axial irradiance of the lenses, the relative error with respect to the analytical solution, and the calculation time required by each method are analyzed and compared. From this analysis it was concluded that the Gauss method presents the best balance between accuracy and computation time. This analysis could be useful to decide the most convenient numerical method to be used for the study of more complex diffractive structures., This work was supported by the Ministerio de Ciencia e Innovacion de Espana (grant PID2019-107391RB-I00) and by Generalitat Valenciana (grant PROMETEO/2019/048), Spain. A.G.M. and F.M.M.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and from the Universitat Politècnica de València (PAID-01-20-25), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Three-Dimensional Refractivity Model for Atmospheric Mitigation in Distance and Vertical Angle Measurements

  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] Atmospheric refraction is a significant challenge to accurate distance and angle measurements in open-air environments, often limiting the precision of measurements obtained using electro-optic geodetic instruments despite their nominal accuracies. This study introduces a novel model, 3D-RM, designed to mitigate atmospheric effects on both distance and vertical angle measurements. The 3D-RM integrates in situ meteorological data from a network of automatic data-loggers, terrain information from a digital terrain model (DTM), and sensible heat flux from the fifth generation of European Centre for Medium-Range Weather Forecast reanalysis (ERA5), which is used in the application of the Turbulence Transfer Model (TTM) for estimating vertical refractivity gradients at various height levels. The model was tested with total station observations to 10 target points during two field campaigns. The results show that applying the model for distance correction leads to improvements in terms of closeness to reference values when compared to the standard method, which relies only on meteorological data collected at the station. Furthermore, the model has been additionally tested by removing the station meteorological data (3D-RM2). The results demonstrate that accurate corrections can be obtained even without the need of meteorological sensors specifically installed at the station point, which makes it more flexible. The 3D-RM is a cost-effective and relatively easy-to-implement solution, offering a promising alternative to existing methodologies, such as measuring meteorological values at both station and target points or the development of new instruments that can compensate the refractivity (such as a multiple-color electronic distance meter)., The research contract of Raquel Lujan was funded by the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Politecnica de Valencia. This work was partially funded by the project Development of High-Precision GNSS Techniques for Dimensional Metrology, Deformation Monitoring, and Geodetic Networks for Civil Engineering Projects (GNSS-Metrology), ref. PID2022-142363NB-I00, Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2021-2023, MCIN/AEI/10.13039/501100011033/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-trap optical tweezers based on kinoform Silver Mean lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this paper, we present the design and implementation of multi-trap optical tweezers based on new quadrifocal kinoform lenses. The phase distribution of these diffractive lenses is characterized by the Silver Mean sequence. The focusing properties of the resulting aperiodic DOEs coined Kinoform Silver Mean Lenses (KSMLs) are numerically examined. It is shown that, under monochromatic illumination, a KSML drives most of the incoming light into four single foci whose focal lengths are related to the Silver ratio. In this way, a KSML improves the diffraction efficiency of binary Fresnel Silver Mean Zone Plates. Through experimental results, the simultaneous trapping of particles in the four focal planes and their three-dimensional manipulation is demonstrated., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-01-20-25) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical multi-trapping by Kinoform m-Bonacci lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
[EN] Optical manipulation is interfacing disciplines in the micro and nanoscale, from molecular biology to quantum computation. Versatile solutions for increasingly more sophisticated technological applications require multiple traps with which to maneuver dynamically several particles in three dimensions. The axial direction is usually overlooked due to difficulties in observing particles away from an objective-lens focal plane, a normal element in optical tweezers, and in managing interparticle distances along the trapping beam propagating direction, where strong radiation pressure and shadowing effects compromise the simultaneous and stable confinement of the particles. Here, aperiodic kinoform diffractive lens based on the m-Bonacci sequence are proposed as a newtrapping strategy. This lens provides split first-order diffractive foci whose separation depends on the generalized m-golden ratio. We show the extended manipulation capabilities of a laser tweezers system generated by these lens, in which concomitant trapping of particles in different focal planes takes place. Positioning particles in the axial direction with computer-controlled distances allows dynamic three-dimensional all-optical lattices, useful in a variety of microscale and nanoscale applications. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement, Ministerio de Ciencia e Innovacion (PID2019-107391RB-I00); Generalitat Valenciana (PROMETEO/2019/048); Universitat Politecnica de Valencia (PAID-01-20-25).