RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
Comparison between a Two-Wavelength Absolute Distance Meter and a GNSS-Based Distance Meter at CERN Geodetic Network
[EN] Absolute distance determination, which is the determination of distances consistent with the International System of Units (SI) definition of meter, is a current challenge for distances of several kilometers in the open air and with submillimetric accuracies, which is being increasingly demanded for scientific and technological applications. We present the first comparison of two techniques recently developed for this purpose: the Arpent Absolute Distance Meter and the improved Global Navigation Satellite System (GNSS)-based distance meter. Both techniques have been tested and compared on the European Organization for Nuclear Research (CERN) geodetic network during a 2-week observation campaign. The results obtained include the rigorous determination of the uncertainties for both methodologies. In the end, four baselines of 2.2, 4.8, 6.0, and 6.5 km were measured, and for three of them, the differences between the two systems were less than 0.7 mm. The baseline of 4.8 km showed a difference of 2.7 mm, i.e., about 0.6 parts per million (ppm): in the case of conventional optical telemetry, such an agreement would require refractivity correction with knowledge of the air temperature and pressure at better than 0.6 K and 0.15 hPa, respectively., This work was partially funded by the Joint Research Project (JRP) 18SIB01 GeoMetre. This project has received funding from the European Metrology Programme for Innovation and Research (EMPIR, funder ID 10.13039/100014132), cofinanced by the participating states and from the European Union's Horizon 2020 research and innovation program. This work was partially funded by the project Development of High-Precision GNSS Techniques for Dimensional Metrology, Deformation Monitoring, and Geodetic Networks for Civil Engineering Projects (GNSS-Metrology), ref. PID2022-142363NB-I00, Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2021-2023, MCIN/AEI/10.13039/501100011033/FEDER, UE.