Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of the local and nonlocal electromagnetic response in all-dielectric reconfigurable metasurfaces

  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Diaz Rubio, Ana|||0000-0002-0115-1834
[EN] Reconfigurable metasurfaces are potent platforms to control the propagation properties of light dynamically. Among different reconfiguration mechanisms available at optical frequencies, using nonvolatile phase change materials is one of the most prominent. Tuning the refractive index of these materials, and thus changing the electromagnetic response of the device, can be achieved by external modulation that enables the transition between their amorphous and crystalline structural states. In this work, we study a structure that exploits these materials to fully control the electromagnetic response (i.e., electric, magnetic, and electromagnetic coupling). Powered by this controllability, we present how the metasurface can be designed to perform beam-steering and switchable one-way absorption applications. In addition, we demonstrate that the same platform can be designed to work in a nonlocal regime to implement a more efficient way of controlling light direction., L. M. M -E. acknowledges Universitat Politecnica de Valencia (PAID-01-23) . A. D.-R. acknowledges a Beatriz Galindo excellence grant (Grant No.BG-00024) and the Spanish National Research Council (Grant No. PID2021-128442NA-I00) . Color palettes and gradients used in the paper were extracted from Ref. [56].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the dynamics of a class of partial differential equations

  • Lizama, Carlos
  • Murillo-Arcila, Marina
  • Vargas-Moreno, Álvaro
[EN] We study the dynamical behavior of a class of partial differential equations which includes the transport equation with decay, the advection-diffusion with decay, the linearized KdV equation and the linearized BBM equation. We characterize the stability regions as well as the chaotic regions in terms of the coefficients of the equation and the weight of the Herzog space. Consequently, we will obtain relations between the chaotic and unstable regions, finding out that under certain restrictions both coincide., C. Lizama is supported by ANID under FONDECYT grant number 1220036. M. Murillo-Arcila is supported by Projects PID2022-139449NB-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, Generalitat Valenciana, Project PROMETEU/2021/070 and the grant "Operator Theory: an interdisciplinary approach", reference ProyExcel_00780, a project financed in the 2021 call for Grants for Excellence Projects, under a competitive bidding regime, aimed at entities qualified as Agents of the Andalusian Knowledge System, in the scope of the Andalusian Research, Development and Innovation Plan (PAIDI 2020) . Counseling of University, Research and Innovation of the Junta de Andalucia. A. Vargas-Moreno is supported by UPV predoctoral grant PAID-01-23 and by MCIN/AEI/10.13039/501100011033, Project PID2022-139449NB-I00, which has financed his research stay at Universidad de Santiago de Chile.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the Impact of 3D Printing Variables on Gear Surface Finish and Wear Behavior

  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • García-Carrasco, Sergio|||0009-0001-9854-0309
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Alejandro de la
  • Eixerés Tomás, Beatriz|||0000-0001-8841-2429
[EN] As 3D printing technology continues to advance, it offers unprecedented opportunities to manufacture complex components such as gears. This study investigates the influence of various variables associated with 3D printing, particularly using the fused deposition modeling (FDM) method, on the surface finish of gears. Additionally, it outlines future research directions aimed at understanding how surface finish behavior correlates with wear resistance. The research begins with an in-depth analysis of the key variables involved in 3D printing gears using the FDM technique. These variables include extrusion temperature, printing speed and layer height. By systematically varying these parameters, the study aims to find their individual and collective effects on the surface finish of 3D printed gears. Experimental tests are carried out to evaluate the impact of each variable on the quality of the surface finish. Parameters such as surface roughness, uniformity of material deposition and layer adhesion are meticulously evaluated. The results demonstrate that variables such as extrusion temperature and layer height exert a significant influence on gear surface finish, while printing speed may have less pronounced effects. In summary, this study highlights the importance of understanding how various 3D printing variables affect gear surface finish and wear behavior. It identifies future areas of research that could provide a better understanding of these phenomena and lead to significant advances in the manufacturing of 3D printed gears.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strong Mode Coupling and Maximum Directional Absorption in Reciprocal Bianisotropic Metasurfaces

  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Amrahi, B.
  • Asadchy, V. S.
[EN] Electromagnetic mode coupling plays a key role in many resonant effects in nanophotonics. This coupling is also responsible for the appearance of bianisotropy, where electric and magnetic responses become interconnected through the interaction of their respective modes. In this work, we develop a simple and general temporal coupled-mode theory model to describe off-diagonal chiral bianisotropy. Using quasi-bound states in the continuum (q-BICs), we demonstrate how to control the hybridization of modes with opposite symmetries, resulting in Rabi-like splitting between the hybrid states in the regime of strong electromagnetic mode coupling. Beyond revealing the physical origin of the hybrid modes, our model predicts and explains the emergence of dual-band asymmetric reflection and absorption and how to achieve the maximum directional absorption difference. The theoretical predictions are verified by full-wave simulations, showing very good agreement with theory. Furthermore, very strong reciprocal bianisotropy is demonstrated with the use of q-BICs in a deeply subwavelength metasurface in the optical frequency range. Our results provide a clear physical picture of the interaction process between modes, offering a compact theoretical framework for understanding and designing bianisotropic dielectric metasurfaces not only in the traditional regime but also in the strong coupling regime., This work was supported by Agencia Estatal de Investigacion (Grants PID2024-162261NB-I00 and CNS2024-154715), Generalitat Valenciana under the PROMETEO Program (CIPROM/2022/14), Universitat Politecnica de Valencia (Grant PAID-01-23), and the Academy of Finland (Grants 356797, 320167, and 368652)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Liquid Lubricant with Glass Microspheres in Suspension to Permanently Improve the Tribological Behavior of PPS

  • García-Carrasco, Sergio|||0009-0001-9854-0309
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Sellés, M.A.|||0000-0002-0784-5757
  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • Alejandro de la
[EN] In the numerous applications of technical polymers, it is a wide practice to compound them with solid lubricants in early steps of fabrication to improve the tribological behavior, considerably reducing friction and wear. Nonetheless, especially in injection molding, the inclusion of these lubricants often poses difficulties as they can significantly alter the viscosity and thermal behavior of the resin inside the screw. This practice is also quite inefficient due to the treatment of the whole bulk of the parts, where only the contact surfaces are affected by these inclusions. So, the aim of this work is to use lubricants with these solid particles in suspension, in order to have them permanently embedded in the working surfaces as they are put into service and then studying the impact that these inclusions have in the tribological behavior of the base polymer., This work has been done inside the PAID-01-23 program in Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy Optimisation and Performance Enhancement in Nutrient Concentration from AnMBR Effluent via Electrodialysis for Resource Recovery

  • Hernández Cuenca, Silvia
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Barat, Ramón|||0000-0003-0484-3614
  • Carrillo-Abad, J.
  • Bouzas, A.
[EN] Optimising energy consumption in electrodialysis systems treating real wastewater effluents remains a challenge, which is essential to be feasible and applicable. In this sense, long-term experiments were conducted under varying currents and applied voltages (0.1A, 7.5V and 10V), aiming to determine the best operating conditions. Subsequently, long-term experiments were performed regarding operational mode in one-stage and two-stage, number of cell pairs, relaxation stages and different influent nutrient concentration to determine the most suitable configuration of an electrodialysis stack treating free-sulphide Anaerobic Membrane Bioreactor effluent. All experiments performed successfully in terms of efficiencies, achieving 88.8±3.1% and 79.6±5.1% nitrogen and phosphorus removal, with 80.2±7.7% and 73.6±11.3% recovery, respectively. Approximately 100% of total current efficiency resulted in experiments, confirming good performance, although only a tiny fraction of current is used by the ions of interest. The best one-stage performance occurred at 7.5V, improved when operating in two stages and when increasing number of cell pairs. Indeed, two-stages operation with 20 cell pairs represented the most favourable condition, enabling compliance with DIRECTIVE (EU) 2024/3019 while maintaining low energy demand (0.17 kWh/m3, 29.92 kWh/kg P recovered, and 4.05 kWh/kg N recovered). Relaxation stages provided no further improvements, whereas higher influent nutrient concentration enhance nutrient recovery., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) , which are gratefully acknowledged. Authors would also like to thank the Vice-Rectorate for Research at the Universitat Politecnica de Valencia (PAID-11-24 and PAID-01-23) and the Vice-Rectorate for Research at the Universitat de Valencia (UV-INV-AE-3673218) for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical twin-vortex multi-trapping by Kolakoski lenses

  • Pérez-Hernández, Arlen Beatriz
  • Garmendía-Martínez, Adrián
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter D.
[EN] In this work, we design and implement a new bifocal diffractive spiral lens within an optical tweezers system. The proposed diffractive optical element coined Kolokaski Kinoform Spiral Lens (KKSL), generates twin optical vortices along the propagation direction. The axial positions, as well as the diameters of the generated vortex beams, are correlated with the Kolakoski aperiodic sequence introduced in the design of the diffractive lens. The unique properties of KKSLs make it ideal for optical trapping applications, allowing independent multiple trapping and particle displacement within each optical vortex beam. We present both the focusing properties of KKSL and the experimental results of its integration into the optical tweezer setup., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. A.G.M. and A.B.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and Universitat Politecnica de Valencia (PAID-01-23), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrodialysis Parameter Optimisation following Aeration Strategy of Anaerobic Membrane Bioreactor effluent to Enhance Water Quality and Nutrient Recovery

  • Hernández Cuenca, Silvia
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Barat, Ramón|||0000-0003-0484-3614
  • Carrillo-Abad, J.
  • Bouzas, A.
[EN] Considering scaling and membrane adsorption limiting phosphorus recovery in previous studies, this work proposes integrating Anaerobic Membrane Bioreactor effluent aeration with Electrodialysis, improving treatment performance. The objective is to produce two streams: a nutrient-rich stream suitable for recovery, and a diluted stream meeting discharge regulations. Short-term experiments were conducted under varying currents and applied voltages, aiming to determine the best operating conditions. Subsequently, long-term experiments were conducted to assess operational stability, and overall system performance. Results indicated that 0.1A and 7.5V were the best values for galvanostatic and potentiostatic mode. Moreover, long-term tests demonstrated that electrodialysis effectively concentrated nitrogen and phosphorus, enabling their recovery, while reducing pollutant load in the effluent. Specifically, in the concentrate up to 952.35 mg NH4-N/L and 72.44 mg PO4-P/L at 0.1A and 856.04 mg NH4-N/L and 70.05 mg PO4-P/L at 7.5V resulted. Diluted stream meets regulations for nitrogen, obtaining 4.7±0.9 and 3.6±0.5 mg/L at galvanostatic and potentiostatic mode. These findings highlight electrodialysis as a promising and sustainable strategy for nutrient recovery and effluent management in advanced wastewater treatment, although strategies such as multi-stage ED, increasing membrane area, anti-scaling coatings or cleaning protocols are necessary to improve phosphorus removal and ensure compliance with regulatory standards., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) , which are gratefully acknowledged. Authors would also like to thank the Vice-Rectorate for Research at the Universitat Politecnica de Valencia (PAID-11-24 and PAID-01-23) and the Vice-Rectorate for Research at the Universitat de Valencia (UV-INV-AE-3673218) for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Damage mechanism identification in additive manufactured extruded polymer via acoustic emission technique, experimental testing and pattern recognition models

  • Barriga-Machado, Byron|||0000-0003-4522-3833
  • Infante-García, Diego|||0000-0001-6010-2031
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Hernández-Casamayor, Álvaro
[EN] This work presents a novel framework for identifying damage mechanisms in material extrusion-based additive manufacturing parts, combining acoustic emission (AE) analysis with unsupervised and hybrid supervised learning techniques. The main objective is to characterize failure modes in polylactic acid specimens and demonstrate the practical potential of data-driven AE analysis for early damage detection and quantification in polymeric additive manufacturing. Extending the current state of the art, the novelty of this study lies in the exploration of multiple clustering algorithms through two approaches: (i) unsupervised learning comparing k-means and density-based spatial clustering of noise-based applications (DBSCAN) combined with fast Fourier transform (FFT) for feature extraction and (ii) a hybrid supervised deep learning approach using a convolutional neural network (CNN) trained on spectrograms from the continuous wavelet transform (CWT). While these approaches have been applied in fields such as composite materials, this is the first work to transfer and validate their use in extrusion-based polymer specimens. The experimental campaign based on different stack configurations of additive extruded samples provides ground-truth fracture observations for model assessment. As a result, DBSCAN proved to be effective in the classification process, identifying two distinct clusters: one with relatively low frequencies up to 260 kHz and another with high frequencies between 270 and 390 kHz. The correlations between these groups and the failure mechanisms were established by visually inspecting the fractured specimens. On the other hand, the hybrid approach combined the labels obtained from the DBSCAN model and the time-frequency features extracted from the signal spectrograms, achieving results consistent with the unsupervised approach. Finally, after enhancing the model performance through successive revisions via experimental correlation of different data-driven analysis pipelines, the present research offers a practical, rapid, and non-destructive tool for in-situ damage detection in polymeric additive manufacturing, contributing to structural health monitoring and process optimization., This research is part of the R+D+i project PID2023-151610OB-C22, funded by MCIN/AEI, Spain/10.13039/501100011033 and by "ERDF: A way of making Europe", and grant PDC2021-121368-C22 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". The funding of the Generalitat Valenciana, Programme PROMETEO, Spain 2021/046 is also acknowledged. The authors also acknowledge the funding received by Universitat Politecnica de Valencia, Spain and CRUE through Programa de Ayudas de Investigacion y Desarrollo (PAID-01-23) and funding for open access.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband transparent Huygens&apos, spaceplates

  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Asadchy, Viktar
[EN] Spaceplates have emerged in the context of nonlocal metasurfaces, enabling the compression of optical systems by minimizing the required empty space between their components. In this work, we design and analyze spaceplates that support resonances with opposite symmetries, operating under the so-called Huygens' condition. Using the temporal coupled-mode theory, we demonstrate that the spatial compression provided by Huygens' spaceplates is twice that of conventional single-resonance counterparts. Additionally, they can support broader operational bandwidths and numerical apertures, facilitating the reduction of chromatic aberrations. Moreover, Huygens' spaceplates maintain nearly full transparency over a wide frequency and angular range, allowing their straightforward cascading for multi-frequency broadband operation. Finally, we propose a physical implementation of a Huygens' spaceplate for optical frequencies based on a photonic crystal slab geometry., The authors would like to thank Prof. Sergei Tretyakov, Prof. Constantin Simovski, and Dr. Francisco S. Cuesta for the fruitful discussions. F.J.D.-F. acknowledges the Next Generation EU program, Spanish National Research Council (Ayuda Margarita Salas), and Universitat Politècnica de València (PAID-06-23). L.M.M-E. acknowledges Universitat Politècnica de València (PAID-01-23). A.D.-R. acknowledges the Beatriz Galindo excellence grant (grant No. BG-00024) and Generalitat Valenciana PROMETEO Program (CIPROM/2022/14). V.A. acknowledges the Research Council of Finland (Project No. 356797), the Finnish Foundation for Technology Promotion, and Research Council of Finland Flagship Programme, Photonics Research and Innovation (PREIN), decision number 346529, Aalto University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Electrochemical sp3 C-O Bond Hydrogenolysis: From Model Compounds to Lignin

  • Molina-Garcia, Miquel
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Doménech-Carbó, Antonio
[EN] The valorization of lignin into aromatic products is currently one of the most relevant challenges in sustainable chemistry. Here, we show that the electrochemical hydrogenolysis of model substrates and organosolv lignin occurs selectively on the sp(3) C-O bond, to give phenols as main products, without deterioration of the aromatic units. The electrochemical system uses stoichiometric amounts of water (H2O) as the only hydrogen source, and inexpensive and widely available magnesium as a sacrificial electrode, to achieve a 98% phenol yield and an overall 98.8% Faradaic efficiency after optimization. Mechanistic studies based on reactive, kinetics, and isotopic experiments, among others, reveal the necessary presence in the system of tri(pyrrolidin-1-yl)phosphine oxide (TPPA) as a protecting agent against electrode passivation and lithium bromide (LiBr) as a supporting electrolyte, enabling the breaking and separation of organosolv lignin into its aromatic and alkyl organic parts. These results open the way to directly obtain the aromatic compounds present in lignin with water and electricity., This work was supported by the Ministerio de Ciencia e Innovacion (PID2023-148441NB-I00, CPP2022-009991, CEX2021-001230-S); Universitat Politecnica de Valencia (PAID 01-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting sensing performance through near-field engineering in low-Q metasurfaces

  • Alvarez-Sanchis, Jose Antonio|||0000-0002-5015-5401
  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Mengual Chulia, Teresa|||0000-0001-9609-2234
  • Griol Barres, Amadeu
  • Diaz Rubio, Ana|||0000-0002-0115-1834
[EN] Dielectric metasurfaces have introduced a new paradigm for substance detection by exploiting their resonant properties to enhance light¿matter interaction. This enhancement can be used for sensing either through refractive index changes or through absorption-based mechanisms. Most works focus on high¿quality factor resonators, aiming to increase field confinement in the vicinity of the resonant structure to improve sensitivity. In this work, we explore an alternative approach based on low¿quality factor, fully dielectric metasurfaces, with engineered modes to enhance near-field concentration. We investigate different topologies that, despite their low quality factors, achieve sensitivity and detection performance beyond what is typically reported for low¿Q structures in the literature. This improvement is enabled by near-field engineering of the evanescent modes, allowing us to control the spatial distribution of the electromagnetic field and maximize its overlap with the analyte. Our results show that careful mode engineering provides a powerful strategy to boost sensing performance without relying on ultra-high-Q resonances., Agencia Estatal de Investigación (PID2024-162261NB-I00, CNS2024-15471); Generalitat Valenciana (CIPROM/2022/14); Universitat Politècnica de València (PAID-01-23, POLISABIO2024-P18); European Commission (101093042).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ceramic Membranes to Separate Anthropogenic Microparticles from Wastewater Sludge Centrate

  • Navajas-Valiente, Samuel|||0009-0007-1379-9316
  • Alvarez Blanco, Silvia
  • Mendoza Roca, José Antonio
  • Bes-Piá, M.A.|||0000-0001-8005-7450
[EN] The liquid stream produced during the dewatering of digested sludge in wastewater treatment plants contains significant concentrations of anthropogenic microparticles. Generally, this stream is recirculated into the wastewater line, reintroducing these microparticles into the treatment system. This study focuses on separating these microparticles using ceramic membranes of microfiltration and ultrafiltration. An in-depth research on cross-contamination was also conducted, including tests in the laboratory plant without and with membranes using deionized water (non-doped and doped with polypropylene microplastics). Both multi-channel and single-channel ceramic membranes configurations, composed of ZrO_2-TiO_2 with a TiO_2 support structure with different molecular weight cut-offs (1 kDa, 50 kDa, 150 kDa, and 1.4 ¿m pore size) were compared to determine which provided better microparticle retention. All membranes achieved 100% rejection of the doped microplastics, which were larger than 50 µm. However, other unknown microparticles, not intentionally added but naturally present in the samples, consistently appeared in the permeates. Specifically for ultrafiltration membranes, when using non-doped MP centrate as feed, the results indicate that multi-channel membranes achieved up to 95% separation efficiency for fragment-shaped microparticles and around 70% for fiber-shaped microparticles. In contrast, single-channel membranes with the same cut-off as the multi-channel membranes showed approximately 50% efficiency for fragments without separating fibers. In conclusion, this study has demonstrated that ultrafiltration of centrate does not guarantee a microparticle-free permeate. Several factors contributed to this, microparticle accumulation in the system, the characteristics of the microfibers and microfragments in the centrate, and even cross-contamination., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors gratefully acknowledge financial support from the Spanish Ministry of Science and Innovation (Project reference: PID2021-127468OB-I00). Additionally, the FPI/UPV/2023 fellowship (Subprogram 1) was funded by the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IA lenta y permacomputing: prácticas artísticas contranarrativas frente a la inteligencia artificial, Slow AI and permacomputing: Counter-narrative artistic practices in response to hegemonic artificial intelligence

  • Rangil Gallardo, Miguel|||0009-0005-7353-4059
  • Mañas-Carbonell, Moises|||0000-0002-2320-2858
[ES] Este artículo, de carácter teórico-crítico, examina una serie de prácticas artísticas vinculadas al movimiento slow AI (IA lenta) que operan como contranarrativas frente a la inteligencia artificial extractiva, centralizada y corporativa. Desde el marco del permacomputing, el texto propone tres categorías de análisis: infraestructura y materialidad; diseño y operabilidad; mediación y pedagogía; y las sostiene mediante un conjunto de casos de las artes digitales contemporáneas (2017-2025) seleccionados por su capacidad de materializar decisiones situadas características de la IA lenta. A través de estudios de casos como Compost Computer (2025), A definitively unfinished AI (2025) o Project Patching-ti hoeh koe (2024) se examinan restricciones deliberadas de energía, espera e intermitencia, junto con decisiones de ejecución local, documentación, modularidad, descentralización y curaduría de datos. Se argumenta que estas decisiones favorecen sistemas reactivables, legibles y mantenibles por comunidades y que desplazan la discusión desde el rendimiento hacia la gobernanza y el cuidado. Por último, se señalan posibles líneas de fortalecimiento iniciadas dentro del propio campo de las prácticas en IA lenta: infraestructuras offline-first, archivos situados y dispositivos pedagógicos de alfabetización crítica., Esta publicación está financiada por la Universitat Politécnica de València a través del programa (PAID-01-23) (01/03/24 - 28/02/26) Mañas-Carbonell, Moises (I.P.); Rangil Gallardo, Miguel. Post-imaginarios artificiales algorítmicos. Creatividad computacional en el contexto artístico automatizado de la visualidad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Countercation- and solvent-controlled selective borohydride hydrogenation of alkenes in diaryl enones

  • Espinosa-López, Miguel
  • Molina-Garcia, Miquel
  • Ciscares-Velázquez, Daniel
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Borohydrides are considered benchmark reagents for the selective hydrogenation of ketones in the presence of alkenes, a reaction described in organic textbooks. However, the opposite, i.e. the borohydride-promoted hydrogenation of an alkene in the presence of a ketone, is barely described. Here we show that the alkene functionality in diaryl enones is preferentially hydrogenated to the ketone under standard uncatalyzed reaction conditions, after using a stoichiometric amount of a metal borohydride (i.e. NaBH4). For gem-diaryl enones, mechanistic studies indicate that the combination of a suitably cation-substituted borohydride (from Li+ to K+) and the particular disposition of the highly-conjugated terminal alkene favors a highly selective 1,4-hydride addition, giving access to alpha-benzyl-substituted propiophenones in high yields, at room temperature and after just 30 min reaction time, without the assistance of any catalyst or additive. For trans-diaryl enones (chalcones), the simple change of the protic co-solvent from MeOH to electron-deficient and sterically-hindered alcohols triggers the selective hydrogenation of the alkene group. These results defy the established reactivity of borohydrides for enones and open a way to employ common borohydride reagents for selective alkene hydrogenation reactions, with potential application in synthetic chemistry., This work is part of the project PID2023-148441NB-I00. Financial support from the Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The work has also been funded by Generalitat Valenciana (Prometeo Grupos de Investigacion de Excelencia PROMETEU/2021/054). M. E. thanks the Universitat de Valencia (PROMETEU/2021/054) for the concession of a contract. M. M.-G. thanks ITQ, UPV-CSIC, for the concession of a contract (PAID 01-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Standard risk assessment methodology for quantifying potential risks in reusing wastewater treated by microalgae-based photorefinery

  • Hernández Cuenca, Silvia
  • Paches Giner, Maria Aguas Vivas|||0000-0002-7796-5228
  • González-Camejo, J.
  • Fatone, F.
  • Eusebi, A.L.
[EN] This work proposes a methodology for quantifying the potential risks to human health associated with reusing wastewater treated in a microalgae-based photorefinery. Microbial risks were quantified using Quantitative Microbial Risk Assessment, while physico-chemical risks were assessed through a combination of Failure Mode and Effects Analysis with World Health Organisation recommendations. Experimental data were obtained from a pilot-scale microalgae-based system set in Italy. Acceptable risk levels (Disability-Adjusted Life Years < 10-6) were obtained for most parameters, demonstrating that wastewater reuse could be both technically and legally feasible. However, the strict Italian legal requirements on ammonium effluent concentrations complicated operations and reduced the amount of reclaimed water available for reuse. This study provides scientific evidence on the potential use of microalgae cultivation to produce reclaimed water, but improved control systems and safety measures should be implemented to mitigate the risks associated with pH, ammonium, and somatic coliphages., This work has been carried out within the framework of the "MicroAlgae 4.0" project funded by the HORIZON MSCA Postdoctoral Fellowships program (101067621) . First author S. Hernandez Cuenca also thanks the support of the Vice-Rectorate of Research of the Universitat Politecnica de Valencia via "Subprograma 1 (PAID-01-23) " predoctoral fellowship, whereas the co-author J. Gonzalez-Camejo acknowledges the Department of Research and Universities of Catalonia ("Departament de Recerca i Universitats de la Generalitat de Catalunya") for its support via Beatriu de Pinos postdoctoral fellowship (BP202300222).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predicting beef diet nutritional composition and intake from rumen metagenomic profiles

  • Saez-Torillo, Santiago Nicolas
  • Martínez-Álvaro, Marina|||0000-0003-2295-5839
  • Danielsson, Rebecca
  • Nguyen, Tuan Q.
  • Lima, Joana
  • Cleveland, Matthew A.
  • Roehe, Rainer
[EN] Knowledge of diet composition and intake levels in beef cattle is valuable for post hoc feed traceability and for more accurate modelling of the diet impact on methane emissions and performance traits. However, a direct measure of this information can be costly and labour-intensive and is not always feasible. In this study, rumen metagenomic data combined with machine learning algorithms were used to predict diet type, nutritional composition, and intake levels. An external validation to assess the generalizability of the models was also performed. Rumen samples were collected from 142 animals belonging to two breeds, Luing (n = 70) and Charolais crossbred (n = 72), with 425.6 f 43.5 d old and 461.9 f 70.2 kg body weight. The animals participated in a 56-d feeding trial and were assigned to diets differing in forage-to-concentrate ratio, with 72 animals receiving a concentrate-based diet and 70 receiving a forage-based diet. Liquid ruminal contents were collected immediately postmortem and subsequently subjected to metagenomic sequencing. Based on these sequences, the relative abundance of microbial genes (MGs), microbial genera (MTs), and phyla were determined. The log-ratio between the abundances of Verrucomicrobia and Chlorobi discriminated diet type with an average classification accuracy of 0.86 f 0.05, while using the log-ratio transformed abundances of 4769 MTs and MGs as predictors reached 0.90 f 0.05. All this microbiome information was used in a random forest model to predict continuous values for nutritional diet components starch, crude protein, neutral and acid detergent fibre, and metabolizable and gross energy with external validation prediction accuracy values between 0.77 and 0.83. Microbiome features important for prediction of diet components such as fibre and starch included Mitsuokella, Selenomonas, and MGs involved in flagellar assembly and aminoacyltRNA biosynthesis. Microbiome data were more informative for predicting the feed composition than the amount of feed consumed, which reached a prediction accuracy of 0.27 f 0.12 for dry matter intake (DMI). However, microbiome data can still be used as a screening tool to classify DMI into low, medium, or high with a classification accuracy of 0.74. Incorporating dietary information into linear phenotypic and genetic models to predict methane production (MP) and DMI reduced root mean square error (RMSE) by 26.9% and 9.6%, respectively, in the phenotypic model. In the genetic model, only MP showed a reduction in RMSE, with a 31% improvement. These findings highlight rumen microbiome data as a valuable tool for the post hoc prediction of feed composition in beef cattle., Martinez-Alvaro thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal grant (RYC2021-032618-I) funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. This project was supported by grants from the Scottish Government, the Department for Environment Food&Rural Affairs (Defra) , UKRI Transforming Food Production Challenges (Innovate UK, No. 10045515) and Genus plc. This research is based on data from experiments funded by the Scottish Government, the Agriculture and Horticulture Development Board (AHDB) Beef & Lamb, Quality Meat Scotland (QMS) , and Defra. Metagenomic data were generated with support from the Biotechnology and Biological Sciences Research Council (BBSRC) through grants BB/N01720X/1and BB/S006567/1.Universitat Politecnica de Valencia., as well as the use of the RIGEL and SIRIUS high-performance computing clusters at the Universitat Politecnica de Valencia. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Situ Amine Formation to Modulate MOF-Derived PdIn N-Doped Carbon Catalysts

  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Martínez, Jordan Santiago
  • Molina, M. Asunción
  • Mazarío, Jaime
  • Costley-Wood, Lucy
  • Cerezo-Navarrete, Christian
  • Marini, Carlo
  • Villalobos-Portillo, Eduardo
  • Beale, Andrew M.
[EN] Metal-Organic Frameworks (MOFs) are versatile precursors for developing heteroatom-doped carbon-supported catalysts with complex structures and functionalities. In this work, we rationalize an amine-mediated approach that combines a mild chemical pretreatment with pyrolysis to direct the transformation of a PdIn-MOF precursor into dispersed PdIn intermetallic nanoparticles supported on N-doped carbon. Advanced characterization techniques, including synchrotron ex situ and in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD), demonstrate that the chemical pretreatment, involving in situ amine generation under reductive conditions, facilitates the early formation of Pd nanoparticles. This pre-nucleation influences the kinetics of intermetallic phase formation during the subsequent pyrolysis, promoting a more regulated alloying process. Systematically varying nitro precursors and solvents shows that amine sterics and basicity govern nanoparticle size, phase development, PdIn ratio, nitrogen doping, and surface area. Finally, catalytic evaluation in alkyne semihydrogenation shows that the family of PdIn catalysts thus prepared achieves outstanding selectivity and high productivity, outperforming benchmarking Pd/C and Lindlar catalysts across diverse substrates. Specifically, materials synthesized using ethanol and amines with low pKb values offer superior control over particle formation and catalytic behavior. Overall, these findings establish and explain a modular strategy for designing next-generation bimetallic catalysts for selective hydrogenation applications via MOF-derived syntheses., G.E. and J.S.M. contributed equally to this work. Financial support by the Severo Ochoa center of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIN/AEI/ 10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. The authors also thank Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia-Subprograma 1 (PAID-01-23) for financial support. Some of these experiments were performed at NOTOS beamline at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero). A. Yuste Rodrigo is acknowledged for experimental contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solvers for the Hermitian and the pseudo-Hermitian Bethe-Salpeter equation in the Yambo code: Implementation and performance

  • Milev, Petru
  • Nalabothula, Muralidhar
  • Esquembre-Kucukalic, Ali
  • Filippone, Francesco
  • Molina-Sanchez, Alejandro
  • Wirtz, Ludger
  • Sangalli, Davide
  • Blanca Mellado-Pinto
  • Alvarruiz Bermejo, Fernando|||0000-0001-5957-9561
  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
[EN] We analyze the performance of two strategies in solving the structured eigenvalue problem deriving from the Bethe-Salpeter equation (BSE) in condensed matter physics. The BSE matrix is constructed with the Yambo code, and the two strategies are implemented by interfacing Yambo with the ScaLAPACK and ELPA libraries for direct diagonalization, and with the SLEPc library for the iterative approach. We consider both the Hermitian (Tamm-Dancoff approximation) and pseudo-Hermitian forms, addressing dense matrices of three different sizes. A description of the implementation is also provided, with details for the pseudo-Hermitian case. Timing and memory utilization are analyzed on both CPU and GPU clusters. Our results demonstrate that it is now feasible to handle dense BSE matrices of the order of 105., Innovation Study ISOLV-BSE has received funding through the Inno4scale project, which is funded by the European High-Performance Computing Joint Undertaking (JU) under Grant Agreement No 101118139. The JU receives support from the European Union's Horizon Europe Programme. DS acknowledges funding from the MaX "MAterials design at the eXascale" project, co-funded by the European High Performance Computing joint Undertaking (JU) and participating countries (Grant Agreement No. 101093374) . DS also acknowledges funding from the European Union's Horizon Europe research and innovation programme under the Marie Sklodowska-Curie grant agreement 101118915 (project TIMES) . DS and PM acknowledge the CINECA, Italy award under the ISCRA initiative, for the availability of high performance computing resources and support, through the project IsCc6_ISOL-RUN. BM, FA, ER, and JER. were partly supported by grant PID2022-139568NB-I00 funded by MCIN/AEI, Spain/10.13039/501100011033 and by "ERDF/EU". BM was also supported by Universitat Politecnica de Valencia, Spain in its PAID-01-23 programme. NM and LW acknowledge the use of HPC facilities of the University of Luxembourg [68] .