Pasar al contenido principal

ESTUDIO EXPERIMENTAL DE LA APLICACION DE LA TECNOLOGIA DE MEMBRANAS PARA POTENCIAR LA RECUPERACION DE RECURSOS EN LAS EDAR ACTUALES.

CTM2017-86751-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the Feasibility of Employing Dynamic Membranes for the Direct Filtration of Municipal Wastewater

  • Sanchis-Perucho, Pau
  • Aguado García, Daniel|||0000-0002-6417-366X
  • FERRER, J.
  • Seco, Aurora
  • Robles, Ángel
[EN] The aim of this study was to assess the feasibility of using dynamic membranes for direct filtration of municipal wastewater. The influence of different alternative supporting materials (one or two layers of flat open monofilament woven polyamide meshes with 1 or 5 mu m of pore size) was studied. A stable short-term self-forming DM was achieved (from some hours to 3 days) regardless of the supporting material used, producing relatively similar permeate qualities (total suspended solids, chemical oxygen demand, total nitrogen, total phosphorous and turbidity of 67-88 mg L-1, 155-186 mg L-1, 48.7-50.4 mg L-1, 4.7-4.9 mg L-1, and 167-174 NTU, respectively). A DM permeability loss rate of from 5.21 to 10.03 LMH bar(-1) day(-1) was obtained, which depended on the supporting material used. Unfortunately, the preliminary energy, carbon footprint, and economic evaluations performed showed that although DMs obtain higher pollutant captures than conventional treatments (primary settler), the benefits are not enough to justify their use for treating average municipal wastewater. However, this alternative scheme could be suitable for treating higher-loaded MWW with a higher fraction of organic matter in the non-settleable solids., This research work was supported by the Ministerio de Economia, Industria y Competitividad via the fellowship PRE2018-083726. This research work was also possible thanks to the financial aid received from the Ministerio de Economia, Industria y Competitividad during the implementation of the Project "AplicaciOn de la tecnologia de membranas para potenciar la transformaciOn de las EDAR actuales en estaciones de recuperaciOn de recursos." (CTM2017-86751-C1 and CTM2017-86751-C2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy Optimisation and Performance Enhancement in Nutrient Concentration from AnMBR Effluent via Electrodialysis for Resource Recovery

  • Hernández Cuenca, Silvia
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Barat, Ramón|||0000-0003-0484-3614
  • Carrillo-Abad, J.
  • Bouzas, A.
[EN] Optimising energy consumption in electrodialysis systems treating real wastewater effluents remains a challenge, which is essential to be feasible and applicable. In this sense, long-term experiments were conducted under varying currents and applied voltages (0.1A, 7.5V and 10V), aiming to determine the best operating conditions. Subsequently, long-term experiments were performed regarding operational mode in one-stage and two-stage, number of cell pairs, relaxation stages and different influent nutrient concentration to determine the most suitable configuration of an electrodialysis stack treating free-sulphide Anaerobic Membrane Bioreactor effluent. All experiments performed successfully in terms of efficiencies, achieving 88.8±3.1% and 79.6±5.1% nitrogen and phosphorus removal, with 80.2±7.7% and 73.6±11.3% recovery, respectively. Approximately 100% of total current efficiency resulted in experiments, confirming good performance, although only a tiny fraction of current is used by the ions of interest. The best one-stage performance occurred at 7.5V, improved when operating in two stages and when increasing number of cell pairs. Indeed, two-stages operation with 20 cell pairs represented the most favourable condition, enabling compliance with DIRECTIVE (EU) 2024/3019 while maintaining low energy demand (0.17 kWh/m3, 29.92 kWh/kg P recovered, and 4.05 kWh/kg N recovered). Relaxation stages provided no further improvements, whereas higher influent nutrient concentration enhance nutrient recovery., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) , which are gratefully acknowledged. Authors would also like to thank the Vice-Rectorate for Research at the Universitat Politecnica de Valencia (PAID-11-24 and PAID-01-23) and the Vice-Rectorate for Research at the Universitat de Valencia (UV-INV-AE-3673218) for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Building a simple multivariable filtration model to predict irreversible fouling when directly filtering municipal wastewater

  • Sanchis-Perucho, Pau
  • Aguado García, Daniel|||0000-0002-6417-366X
  • Harmand, Jerome
  • Feddaoui-papin, Aida
  • Robles Martínez, Ángel
[EN] This paper describes a simple generic model designed to predict membrane fouling in municipal wastewater (MWW) treatment. The work was conducted using data from a direct membrane filtration demo-system (middle/ long-term filtration periods of about 35 - 124 days) to calibrate the model. Two influents were treated by the demo-system: raw pre-treated MWW and primary settler supernatant from a full-scale MWW treatment plant. A resistance-in-series mathematical model structure was proposed considering fouling due to two different mechanisms: persistent cake layer formation (from suspended material) and pore blocking (from soluble and colloidal compounds). The proposed model represented transmembrane pressure dynamics at different operating solids concentrations (around 1, 2.6, 6 and 11 gL-1) using 7 model parameters, achieving 7-28 mbar differences between the experimental data and model predictions in all cases (calculated as the root mean square error). The model was also able to match the results from two different influents (raw MWW and primary settler supernatant) by modifying 3 of the 7 parameters while low uncertainties were obtained in long-term filtrations, demonstrating its robustness. This model thus provides a good potential to generate reasonable membrane fouling predictions while its simple and open structure makes it easy to implement with complementary materials. Further research will be carried out to enhance the model's precision and validate its potential for optimizing filtration and fouling control processes., This research work was supported by the Ministerio de Economia, Industria y Competitividad via Grant N degrees PRE2018-083726. It was also made possible thanks to the financial support received from the above Ministry during the implementation of the Project " Aplicacion de la tecnologia de membranas para potenciar la transformacion de las EDAR actuales en estaciones de recuperacion de recursos ." (CTM2017-86751-C1 and CTM2017-86751-C2) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing and modeling nitrite inhibition in microalgae-bacteria consortia for wastewater treatment by means of photo-respirometric and chlorophyll fluorescence techniques

  • Aparicio, Stéphanie
  • Robles, Ángel
  • FERRER, J.
  • Seco, Aurora
  • Borrás Falomir, Luis
[EN] Total nitrite (TNO2 = HNO2 + NO2-) accumulation due to the activity of ammonia-oxidizing bacteria (AOB) was monitored in microalgae-bacteria consortia, and the inhibitory effect of nitrite/free nitrous acid (NO2-N/FNA) on microalgae photosynthesis and inhibition mechanism was studied. A culture of Scenedesmus was used to run two sets of batch reactors at different pH and TNO2 concentrations to evaluate the toxic potential of NOrN and FNA. Photo-respirometric tests showed that NO2-N accumulation has a negative impact on net oxygen production rate (OPRNET). Chlorophyll a fluorescence analysis was used to examine the biochemical effects of NO2-N stress and the mechanism of NO2-N inhibition. The electron transport rate (ETR), non-photochemical quenching (NPQ), and JIP-test revealed that the electron transport chain between Photosystems II and I (PS II and PS I) was hindered at NO2-N concentrations above 25 g N m(-3). Electron acceptor Q(A) was not able to rcoxidize and could not transfer electrons to the next electron acceptor, Q(B), accumulating P-680(+) (excited PS II reaction center) and limiting oxygen production. A semi-continuous reactor containing a Scenedesmus culture was monitored by photo-respiromeiry tests and Chlorophyll a fluorescence to calibrate NO2-N inhibition (5-35 g N m(-3)). Non-competitive inhibition and Hill-type models were compared to select the best-fitting inhibition equations. Inhibition was correctly modeled by the Hill-type model and a half inhibition constant (K-L) for OPRNET, NPQ, maximum photosynthetic rate (EERMAX) and the performance index PIABS s was 23.7 +/- 1.2, 26.36 +/- 1.10, 39 +/- 2 and 26.5 +/- 0.4, respectively., This research work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO, Projects CTM2014-54980-C2-1-R, CTM2014-54980-C2-2-R, CTM2017-86751-C2-1-R and CTM2017-86751-C2-2-R) jointly with the European Regional Development Fund (ERDF) , both of which are gratefully acknowledged. It was also supported by the Spanish Ministry of Education, Culture and Sport via a pre-doctoral FPU fel-lowship to author Stephanie Aparicio (FPU/15/02595) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nitrogen recovery using a membrane contactor: Modelling nitrogen and pH evolution

  • Noriega-Hevia, Guillermo
  • Borrás, L.
  • Seco, A.
  • FERRER, J.
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
[EN] A hollow fibre membrane contactor has been applied for nitrogen recovery from anaerobic digestion supernatant at different operating conditions obtaining nitrogen recovery efficiencies over 99 %. A mathematical model able to represent the time evolution of pH and nitrogen concentration during the recovery process is presented in this paper. The developed model accurately reproduced the results obtained in 26 experiments carried out at different pH values (from 9 to 11), temperatures (from 25 to 35 degrees C), membrane surfaces (from 1.2 to 2.4 m(2)) and feed flow rates (from 0.33 x 10(-5) to 5.83 x 10(-5) m(3)/s) predicting the variations in nitrogen recovery rates measured at the different operating conditions evaluated. Furthermore, due to the combination of nitrogen and pH modelling, the model is able to predict the variations in OH-concentration (alkali addition) required to increase and maintain the pH during the process. Thus, this model is a useful tool for process design and optimisation since it can predict nitrogen recovery rates and reagents consumption at different operational conditions such as flow rate, pH, membrane surface and temperature., This research was financially supported by the Spanish Ministry of Economy and Competitiveness (MINECO projects CTM2014-54980-C21/2-R and CTM2017-86751-C2-1/2-R) with the European Regional Development Fund (ERDF) as well as the Universitat Politecnica de Valencia via a pre-doctoral FPI fellowship to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Membranes for Enhancing Resources Recovery from Municipal Wastewater

  • Sanchis-Perucho, Pau
  • Aguado García, Daniel|||0000-0002-6417-366X
  • FERRER, J.
  • Seco, Aurora
  • Robles, Ángel
[EN] This paper studied the feasibility of using dynamic membranes (DMs) to treat municipal wastewater (MWW). Effluent from the primary settler of a full-scale wastewater treatment plant was treated using a flat 1 mu m pore size open monofilament polyamide woven mesh as supporting material. Two supporting material layers were required to self-form a DM in the short-term (17 days of operation). Different strategies (increasing the filtration flux, increasing the concentration of operating solids and coagulant dosing) were used to enhance the required forming time and pollutant capture efficiency. Higher permeate flux and increased solids were shown to be ineffective while coagulant dosing showed improvements in both the required DM forming time and permeate quality. When coagulant was dosed (10 mg L-1) a DM forming time of 7 days and a permeate quality of total suspended solids, chemical oxygen demand, total nitrogen, total phosphorous and turbidity of 24 mg L-1, 58 mg L-1, 38.1 mg L-1, 1.2 mg L-1 and 22 NTU, respectively, was achieved. Preliminary energy and economic balances determined that energy recoveries from 0.032 to 0.121 kWh per m(3) of treated water at a cost between euro0.002 to euro0.003 per m(3) of treated water can be obtained from the particulate material recovered in the DM., This research work was supported by Ministerio de Economia, Industria y Competitividad via the fellowship PRE2018-083726. This research work was also possible thanks to the financial received from Ministerio de Economia, Industria y Competitividad during the implementation of the Project ¿Aplicación de la tecnología de membranas para potenciar la transformación de las EDAR actuales en estaciones de recuperación de recursos.¿ (CTM2017-86751-C1 and CTM2017-86751-C2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrodialysis Parameter Optimisation following Aeration Strategy of Anaerobic Membrane Bioreactor effluent to Enhance Water Quality and Nutrient Recovery

  • Hernández Cuenca, Silvia
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Barat, Ramón|||0000-0003-0484-3614
  • Carrillo-Abad, J.
  • Bouzas, A.
[EN] Considering scaling and membrane adsorption limiting phosphorus recovery in previous studies, this work proposes integrating Anaerobic Membrane Bioreactor effluent aeration with Electrodialysis, improving treatment performance. The objective is to produce two streams: a nutrient-rich stream suitable for recovery, and a diluted stream meeting discharge regulations. Short-term experiments were conducted under varying currents and applied voltages, aiming to determine the best operating conditions. Subsequently, long-term experiments were conducted to assess operational stability, and overall system performance. Results indicated that 0.1A and 7.5V were the best values for galvanostatic and potentiostatic mode. Moreover, long-term tests demonstrated that electrodialysis effectively concentrated nitrogen and phosphorus, enabling their recovery, while reducing pollutant load in the effluent. Specifically, in the concentrate up to 952.35 mg NH4-N/L and 72.44 mg PO4-P/L at 0.1A and 856.04 mg NH4-N/L and 70.05 mg PO4-P/L at 7.5V resulted. Diluted stream meets regulations for nitrogen, obtaining 4.7±0.9 and 3.6±0.5 mg/L at galvanostatic and potentiostatic mode. These findings highlight electrodialysis as a promising and sustainable strategy for nutrient recovery and effluent management in advanced wastewater treatment, although strategies such as multi-stage ED, increasing membrane area, anti-scaling coatings or cleaning protocols are necessary to improve phosphorus removal and ensure compliance with regulatory standards., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) , which are gratefully acknowledged. Authors would also like to thank the Vice-Rectorate for Research at the Universitat Politecnica de Valencia (PAID-11-24 and PAID-01-23) and the Vice-Rectorate for Research at the Universitat de Valencia (UV-INV-AE-3673218) for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling the anaerobic treatment of sulfate rich urban wastewater. Application to AnMBR technology

  • Durán, Freddy
  • Robles Martínez, Ángel
  • Giménez, Juan Bautista
  • FERRER, J.
  • Ribes, Josep
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
[EN] Although anaerobic membrane bioreactors (AnMBR) are a core technology in the transition of urban wastewater (UWW) treatment towards a circular economy, the transition is being held back by a number of bottlenecks. The dissolved methane released from the effluent, the need to remove nutrients (ideally by recovery), or the energy lost by the competition between methanogenic and sulfate-reducing bacteria (SRB) for the biodegradable COD have been identified as the main issues to be addressed before AnMBR becomes widespread. Mathematical modeling of this technology can be used to obtain further insights into these bottlenecks plus other valuable information for design, simulation and control purposes. This paper therefore proposes an AnMBR anaerobic digestion model to simulate the crucial SRB-related process since these bacteria degrade more than 40% of the organic matter. The proposed model, which is included in the BNRM2 collection model, has a reduced but all-inclusive structure, including hydrolysis, acidogenesis, acetogenesis, methanogenesis and other SRB-related processes. It was calibrated and validated using data from an AnMBR pilot plant treating sulfate-rich UWW, including parameter values obtained in off-line experiments and optimization methods. Despite the complex operating dynamics and influent composition, it was able to reproduce the process performance. In fact, it was able to simulate the AD of sulfate-rich UWW considering only two groups of SRB: heterotrophic SRB growing on both VFA (propionate) and acetate, and autotrophic SRB growing on hydrogen. Besides the above-mentioned constraints, the model reproduced the dynamics of the mixed liquor solids concentration, which helped to integrate biochemical and filtration models. It also reproduced the alkalinity and pH dynamics in the mixed liquor required for assessing the effect of chemical precipitation on membrane scaling., This research work was supported by the Spanish Ministry of Economy and Competitiveness [Grants CTM2011-28595-C02-01/02, CTM2017-86751-C2-1-R and CTM2017-86751-C2-2-R]; Co-funded by the European Regional Development Fund [Grant CTM2011-28595-C02-01/02].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Estudio de la eliminación/recuperación de nitrógeno en el permeado de la ultrafiltración de la línea de aguas de una EDAR mediante eliminación por nitrificación parcial y recuperación con zeolitas

  • Godifredo Calvo, Jesús
[ES] Los procesos convencionales de depuración del agua residual presentan un elevado consumo energético y no permiten la recuperación de los recursos presentes en el agua. En la transformación de las Estaciones Depuradoras de Agua Residual (EDAR) en estaciones de recuperación de recursos, los procesos de redirección de carbono, como la ultrafiltración del agua residual (UF), juegan un papel crucial. Esta tecnología envía toda la materia orgánica suspendida y parte de la soluble a la digestión anaerobia. Tras la filtración, la línea principal de aguas presenta una composición diferente a la tradicional, principalmente una baja ratio de materia orgánica por unidad de nitrógeno (DQO/N) ausencia de sólidos suspendidos. Esta tesis doctoral tiene como objetivo estudiar experimentalmente, y con modelos matemáticos, diferentes alternativas de tratamiento del permeado de una planta piloto de UF de agua residual urbana real para lograr un efluente que cumpla con los requisitos de vertido. Los esquemas propuestos permiten aprovechar las infraestructuras existentes de las EDARs. La tesis está estructurada en cuatro bloques: 1- Estudio proceso convencional de nitrificación-desnitrificación (ND). Los resultados indican que el proceso de filtración retiene una elevada concentración de materia orgánica y reduce la ratio DQO/N por debajo de las condiciones estequiométricas necesarias, provocando que no todo el nitrógeno pueda ser eliminado mediante ND. Para poder mantener este tratamiento se necesitaría baipasear una parte del agua de entrada al proceso de filtración, para ajustar la ratio DQO/N al valor necesario, o aplicar esta alternativa en aquellos influentes con una alta concentración de materia orgánica soluble, ya que una parte de esta fracción no será retenida. 2- Evaluación del proceso de nitrificación parcial (NP) seguido del proceso Anammox. Ambas etapas biológicas no requieren de materia orgánica para la eliminación del nitrógeno y su consumo energético es menor, al reducir las necesidades de aireación. Experimentalmente se estudió el proceso de NP en la línea principal de aguas. Regulando la duración de la fase aerobia mediante un controlador basado en el pH y el oxígeno, mantenido una concentración de oxígeno de 0.5 mg O2/L y tiempos de retención celular de 3 a 10 días, se consiguió acumular N-NO2 en el reactor. El modelo matemático confirmó la importancia de estos parámetros de operación. 3- Concentración del nitrógeno mediante columnas de intercambio catiónico (IC) y recuperación en contactores de membranas (HFMC). Inicialmente se seleccionó el material adsorbente a partir de los resultados de los ensayos de cinéticas de adsorción. La zeolita natural, el material escogido, se caracterizó y se analizó la influencia de los interferentes mediante las isotermas de adsorción. También se analizó qué regenerante ofrecía mejores resultados. Por último, se realizaron varios ensayos en columnas de adsorción para estudiar la influencia del caudal de trabajo y la concentración de amonio en el afluente sobre la capacidad de adsorción de amonio y el volumen de permeado tratado antes de alcanzar el punto de ruptura. Así mismo se ha estudiado el efecto del caudal de regeneración y la concentración del agente regenerante sobre la capacidad de regeneración y la concentración de la corriente rica en nitrógeno. Se observó cómo con la medida de la conductividad es posible determinar la duración de ambas fases. Los datos experimentales, los resultados de los modelos matemáticos y un balance económico sirvieron para determinar las condiciones de operación. 4- Análisis económico y ambiental de las tres alternativas propuestas para identificar las alternativas viables en la mejora de una EDAR existente o construcción de una nueva instalación. En ambos escenarios el proceso de UF resultó ser el principal limitante para la implantación de alguna de las alternativas. Realizando una proyección futura sobre cómo estará esta tecnología en un corto plazo se est, [CA] Els processos convencionals de depuració de l'aigua residual presenten un elevat consum energètic i no permeten una recuperació dels recursos presents en l'aigua. En la transformació de les Estacions Depuradores d'Aigua Residual (EDAR) en estacions de recuperació de recursos, els processos de redirecció de carboni, com la ultrafiltració de l'aigua residual (UF) juguen un paper crucial. Aquesta tecnologia envia tota la matèria orgànica suspesa i part de la soluble (la fracció col·loidal) a la digestió anaeròbia. Després de la filtració, la línia principal d'aigües presenta una composició diferent de la tradicional, un baix ràtio de matèria orgànica per unitat de nitrogen (DQO/N) i està exempt de sòlids suspesos. Aquesta tesi doctoral té com a objectiu estudiar experimentalment, i amb models matemàtics, diferents alternatives de tractament del permeat d'una planta pilot d'ultrafiltració d'aigua residual urbana real per a aconseguir un efluent que complisca amb els requisits d'abocament. Els esquemes proposats permeten aprofitar les infraestructures existents de les EDARs. La tesi està estructurada en quatre blocs: 1- Estudi del procés convencional de nitrificació-desnitrificació (ND). Els resultats experimentals indiquen que el procés de filtració reté una elevada concentració de matèria orgànica i redueix el ràtio el ràtio DQO/N per baix de les condicions estequiomètriques necessàries, que no tot el nitrogen puga ser eliminat amb ND. Pel que per a poder mantindre aquest tractament es necessitari bypasear una part de l'aigua d'entrada el procés de filtració que parteix de l'aigua d'entrada per a ajustar el ràtio DQO/N al valor necessari, o aplicar-lo en aquells influents amb una alta concentració de matèria orgànica soluble, ja que una part d'aquesta fracció no serà retinguda. 2- Avaluació del procés de nitrificació parcial (NP) seguit del procés Anammox. Totes dues etapes biològiques no requereixen de matèria orgànica per a l'eliminació del nitrogen i el seu consum energètic és menor, en reduir les necessitats de ventilació. Experimentalment es va estudiar el procés de NP en la línia principal d'aigües.Reglant la duració de la fase aeròbia mitjançant un controlador basat en el pH i l'oxigen, mantingut una concentració d'oxigen de 0.5 mg O2/L i temps de retenció cel·lular de 3 a 10 dies, es va aconseguir acumular NO2 en el reactor. El model matemàtic va confirmar la importància d'aquests paràmetres d'operació. 3- Concentració del nitrogen mitjançant columnes d'intercanvi catiònic (IC) i recuperació en contactors de membranes (HFMC). Inicialment es va seleccionar el material adsorbent a partir dels resultats de les proves de cinètiques d'adsorció. La zeolita natural, el material triat, es va caracteritzar i es va analitzar la influència dels interferents mitjançant isotermes d'adsorció. També es va analitzar quin regenerant oferia millors resultats. Després, es van realitzar diversos assajos en columnes d'adsorció per a estudiar la influència del cabal de treball i la concentració d'amoni en el influent i d'altra banda, el cabal de regeneració i la concentració de l'agent regenerant. Es va observar com mitjançant amb la conductivitat es pot determinar la duració de totes dues fases. Les dades experimentals, els resultats dels models matemàtics i un balanç econòmic van servir per a determinar les condicions d'operació. 4- Anàlisi econòmica i ambiental de les tres alternatives proposades, amb consideracions ambientals per a identificar les alternatives viables en la millora d'una EDAR existent o construcció d'una nova instal·lació. En tots dos escenaris el procés de UF va resultar ser el principal coll de botella per a facilitar la implantació d'alguna de les alternatives. Realitzant una projecció futura sobre com estarà aquesta tecnologia en un curt termini, es van estimar unes moderades millores tant en el seu cost, operació i rendiment. En aquesta projecció futura l'escenari 1, ND, no aconsegueix aconseguir uns re, [EN] Conventional wastewater treatment processes are energy-intensive and do not allow the recovery of the resources present in the water. On the way towards the transformation of Wastewater Treatment Plants (WWTP) into resource recovery plants, carbon redirection processes, such as ultrafiltration of wastewater (UF), play a crucial role. This technology sends all suspended and part of the soluble organic matter to anaerobic digestion. After filtration, the main water line presents a different characteristic from the traditional one, mainly a low ratio of organic matter per unit of nitrogen (COD/N) and absence of suspended solids. This doctoral thesis aims to study experimentally, and with mathematical models, different alternatives of treatment of the permeate from a real urban wastewater UF pilot plant to achieve an effluent that meets the discharge requirements. The proposed schemes allow to take advantage of existing WWTP infrastructures. The thesis is structured in four blocks: 1- Study of conventional nitrification-denitrification (ND) process. The results indicate that the filtration process retains a high concentration of organic matter and reduces the COD/N ratio below the necessary stoichiometric conditions, causing incomplete nitrogen removal. In order to maintain this treatment, it would be necessary to bypass part of the inlet water to the filtration process, to adjust the COD/N ratio to the necessary value, or to apply this alternative in those influents with a high concentration of soluble organic matter, since part of this fraction will not be retained. 2- Evaluation of the partial nitrification process (PN) followed by the Anammox process. Both biological stages do not require organic matter for nitrogen removal and their energy consumption is lower, as aeration needs are reduced. The PN process was studied experimentally in the main water line. By controlling the duration of the aerobic phase with a pH and oxygen-based controller, maintaining an oxygen concentration of 0.5 mg O2/L and sludge retention times of 3 to 10 days, N-NO2 accumulation in the reactor was achieved. The mathematical model confirmed the importance of these operational parameters. 3- Nitrogen concentration by cation exchange columns (CEC) and recovery in membrane contactors (HFMC). Initially, the adsorbent material was selected based on the results of the adsorption kinetics tests. Natural zeolite, the material chosen, was characterized and the influence of interferents was analyzed by means of adsorption isotherms. It was also analyzed which regenerant provided the best results. Finally, several tests were carried out on adsorption columns to study the influence of the working flow rate and the concentration of ammonium in the influent on the ammonium adsorption capacity and the volume of permeate treated before reaching the breakpoint. The effect of the regeneration flow rate and the concentration of the regeneration agent on the regeneration capacity and the concentration of the nitrogen-rich stream was also studied. It was observed that by conductivity monitoring it is possible to determine the duration of both phases. Experimental data, the results of mathematical models and an economic balance were used to determine the operating conditions. 4- Economic and environmental analysis of the three proposed alternatives to identify viable alternatives in the improvement of an existing WWTP or construction of a new facility. In both scenarios the UF process turned out to be the main bottleneck to facilitate the implementation of any of the alternatives. By making a future projection of how this technology will be in the short term, improvements in its acquisition cost, operating costs and performance were estimated. With this projection, alternative 1, ND, does not achieve appropriate economic returns. Alternative 2, PN + Anammox, shows a better economic balance than the current situation. Alternative 3, CEC + HFMC, as it does not take advanta, Esta tesis se ha desarrollado dentro del marco de trabajo del proyecto ‘Aplicación de la tecnología de membranas para potenciar la transformación de las EDAR actuales en estaciones de recuperación de recursos Proyecto MEM4REC (Código del proyecto: CTM2017-86751-C2-1-R), financiado por el Ministerio de economía, industria y competitividad (MINECO). También esta tesis se ha visto financiada por la ayuda para la formación de profesorado universitario (FPU) (código de la ayuda: FPU17/00540), financiada por el Ministerio de Universidades
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long-term electrodialysis nutrient concentration from anaerobic membrane bioreactor effluents: Challenges for calcium sulfate precipitation

  • Ruiz-Barriga, Patricia
  • Bouzas, A.
  • Carrillo-Abad, J.
  • Hernández Cuenca, Silvia
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Barat, Ramón|||0000-0003-0484-3614
[EN] Fertilizer requirements keep rising while phosphorus reserves diminish, and Haber-Bosch process contributes significantly to the greenhouse effect. In this sense, transforming conventional Wastewater Treatment Plants (WWTP) into resource recovery facilities (RRF) seems an attractive option. Electrodialysis enables the separation of ions from solution, generating dilute and concentrated effluents. Hard waters with high sulfate concentrations, such as Spanish Mediterranean basins, generate gypsum during the process, hindering nutrient concentration. Therefore, different long-term approaches were tested with AnMBR effluent to address this challenge. Although gypsum precipitation could not be avoided, pH control in the concentrated stream with HCl delayed the phenomenon. However, approximately 500 mg·L¿1 NH4-N and 60 mg·L¿1 PO4-P were obtained in the concentrate when bulk precipitation was observed. In contrast, using softened water yielded concentrations above 1500 mg·L¿1 NH4-N and 135 mg·L¿1 PO4-P, corresponding to 24.3- and 39.5-fold increases over their initial values and confirming that ED is suitable for soft AnMBR effluents. Energy consumption ranged from 0.2 to 0.6 kWh·m¿3, requiring further reduction to facilitate the process scale-up. Nonetheless, nitrogen production showed similar values (7.2 to 17.6 kWh·kgN¿1) to those of the Haber-Bosch industrial process (8.9¿19.3 kWh·kgN¿1). Regarding the effluent, all the hard water experiments met the least restrictive requirements of DIRECTIVE (EU) 2024/3019 of 10 mg·L¿1 NH4-N and 0.7 mg·L¿1 PO4-P. Therefore, ED appears an interesting option for transforming WWTP into RRF., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) and the Vice-Rectorate for Research at the Universitat de Valencia (UV-INV-AE-3673218) for their support, which are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using machine learning techniques to predict ammonium concentration in membrane contactors for nitrogen recovery as a valuable resource

  • Aguado García, Daniel|||0000-0002-6417-366X
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
  • Noriega-Hevia, G.
  • Seco, A.
[EN] The availability of real-time measurements of primary quality water variables is one of the key challenges in the wastewater treatment industry. However, due to the cost and maintenance requirements of sensors and probes for on-line measurement of primary quality variables, the prediction of these variables via data-driven approaches using as inputs easy-to-measure process variables has attracted research interest. In this paper, different machine learning techniques: feed-forward artificial neural network, random forest, support vector machine, gaussian process regression and partial least squares were used to predict in real-time the total ammonium nitrogen concentration during the operation of a hollow fibre membrane contactor. This recently developed technology allows the recovery of nitrogen from nitrogen rich streams (i.e. supernatant of anaerobic digesters in wastewater treatment plants) as ammonium sulphate (a marketable fertilizer). These contactors are usually operated in batch mode, pumping the high nitrogen concentration feed from the storage tank, where the total ammonium nitrogen concentration decreases progressively as the fertilizer is produced. Knowing the real-time concentration of total ammonium nitrogen in the storage tank would enable the optimization of the process operation, avoiding its operation with conservative fixed-time batch duration. The pH is an easy-to-measure process variable usually available in wastewater treatment plants that was used as input of the tested datadriven models, together with two extracted features from this variable (its derivative and increments after each reagent dosing). The number of total ammonium nitrogen measurements in the collected database is 2350 data points (corresponding to 8 complete batches, which were divided into 6 for training the data-driven models and 2 for testing them), ranging from 987 to 2.5 mg NH4+-N/L which covers almost the complete range of total ammonium nitrogen concentration values in the membrane contactor. The predictive ability of the developed predictive models was evaluated on the test data set by four indices, namely: the root-mean-square error, the slope and the intercept of the linear fit between the measured and predicted concentrations and the determination coefficient. The results showed a strong predictive ability of the fitted ANN that outperformed the other approaches exhibiting a determination coefficient of 0.99 and the lowest root-mean-square error (19.87 mg/L) in the test set. Permutation variable importance demonstrated that all machine learning techniques depended mainly on the two variables extracted from the pH: its derivative and increments, which resulted to be more important than the pH itself to predict the total ammonium nitrogen concentration., This research was financially supported by the Spanish Ministry of Economy and Competitiveness (MINECO projects CTM2014-54980-C2-1/2-R and CTM2017-86751-C2-1/2-R) with the European Regional Development Fund (ERDF) as well as the Universitat Politecnica de Valencia via a predoctoral FPI fellowship to Guillermo Noriega. We would also like to thank the anonymous reviewers for their suggestions that have contributed to improving this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating resource recovery potential and process feasibility of direct membrane ultrafiltration of municipal wastewater at demonstration scale

  • Sanchis-Perucho, Pau
  • Aguado García, Daniel|||0000-0002-6417-366X
  • Ferrer, J.
  • Seco Torrecillas, Aurora
  • Robles Martínez, Ángel
[EN] The aim of this work was to assess the feasibility of applying ultrafiltration membranes for the direct filtration of municipal wastewater. The effect of different influents (raw wastewater and the primary settler effluent of a municipal wastewater treatment plant) and operating solids concentration (about 1, 2.6, 6 and 11 g L¿1) was evaluated. Increasing the operating solids concentration sharply reduced membrane fouling, achieving a minimum of about 0.55 mbar per day when operating above 6 g L¿1. Filtering raw municipal wastewater also had a beneficial effect on the filtration performance, although only when operating at a low solids concentration (under 2.6 g L¿1). High quality permeates were obtained regardless of operating conditions, meeting European discharge requirements for no sensible environments. High resource recoveries were achieved thanks to the direct filtration of wastewater, capturing about 80-85 and 20%¿40% of the influent COD and nutrients, respectively. The energy and carbon footprint balances showed promising results, achieving energy recoveries and carbon footprints of about 0.46-0.40 kWh per m3 of influent municipal wastewater and -[0.19-0.16] kg CO2-eq per m3 of influent municipal wastewater when considering the process energy demands and potential energy recovery. Additionally, profits can be obtained from MWW treatment by this alternative, achieving about €0.035¿0.021 per m3 of influent MWW when operating at a flux of 10 LMH which entail a payback period for the initial membrane acquisition of 12.3¿20.1 years., This research work was supported by the Spanish Ministerio de Economia, Industria y Competitividad via Fellowship PRE2018-083726. It was also possible thanks to the finance received from the Ministerio de Economia, Industria y Competitividad, Spain during the implementation of the Project "Aplicacion de la tecnologia de membranas para potenciar la transformacion de las EDAR actuales en estaciones de recuperacion de recursos" (CTM2017-86751-C1 and CTM2017- 86751-C2) . The EPSAR (Entidad Publica de Saneamiento de Aguas de la Comunitat Valenciana) , Spain is gratefully acknowledged for its support for this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct Membrane Filtration of MunicipalWastewater: Studying the Most Suitable Conditions for Minimizing Fouling Rate in Commercial Porous Membranes at Demonstration Scale

  • Sanchis-Perucho, Pau
  • Aguado García, Daniel|||0000-0002-6417-366X
  • FERRER, J.
  • Seco, Aurora
  • Robles, Ángel
[EN] This study aimed to evaluate the feasibility of applying a commercial porous membrane to direct filtration of municipal wastewater. The effects of membrane pore size (MF and UF), treated influent (raw wastewater and the primary settler effluent of a municipal wastewater treatment plant) and operating solids concentration (about 1 and 2.6 g L-1) were evaluated on a demonstration plant. Filtration periods of 2-8 h were achieved when using the MF membrane, while these increased to 34-69 days with the UF membrane. This wide difference was due to severe fouling when operating the MF membrane, which was dramatically reduced by the UF membrane. Use of raw wastewater and higher solids concentration showed a significant benefit in the filtration performance when using the UF module. The physical fouling control strategies tested (air sparging and backwashing) proved to be ineffective in controlling UF membrane fouling, although these strategies had a significant impact on MF membrane fouling, extending the operating period from some hours to 5-6 days. The fouling evaluation showed that a cake layer seemed to be the predominant reversible fouling mechanism during each independent filtration cycle. However, as continuous filtration advanced, a large accumulation of irreversible fouling appeared, which could have been related to intermediate/complete pore blocking in the case of the MF membrane, while it could have been produced by standard pore blocking in the case of the UF membrane. Organic matter represented more than 70% of this irreversible fouling in all the experimental conditions evaluated., This research work was supported by the Spanish Ministerio de Economia, Industria y Competitividad via Fellowship PRE2018-083726 and was also possible thanks to the funding received from Ministerio de Economia, Industria y Competitividad during the implementation of the Project "Aplicacion de la tecnologia de membranas para potenciar la transformacion de las EDAR actuales en estaciones de recuperacion de recursos." (CTM2017-86751-C1 and CTM2017-86751-C2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Global sensitivity and uncertainty analysis of a microalgae model for wastewater treatment

  • Aparicio, Stéphanie
  • Serna-García, Rebecca
  • Seco, Aurora
  • FERRER, J.
  • Borrás Falomir, Luis
  • Robles, Ángel
[EN] The results of a global sensitivity and uncertainty analysis of a microalgae model applied to a Membrane Photobioreactor (MPBR) pilot plant were assessed. The main goals of this study were: (I) to identify the sensitivity factors of the model through the Morris screening method, i.e. the most influential factors; (II) to calibrate the influential factors online or offline; and (III) to assess the model's uncertainty. Four experimental periods were evaluated, which encompassed a wide range of environmental and operational conditions. Eleven influential factors (e.g. maximum specific growth rate, light intensity and maximum temperature) were identified in the model from a set of 34 kinetic parameters (input factors). These influential factors were preferably calibrated offline and alternatively online. Offline/online calibration provided a unique set of model factor values that were used to match the model results with experimental data for the four experimental periods. A dynamic optimization of these influential factors was conducted, resulting in an enhanced set of values for each period. Model uncertainty was assessed using the uncertainty bands and three uncertainty indices: p-factor, r-factor and ARIL. Uncertainty was dependent on both the number of influential factors identified in each period and the model output analyzed (i.e. biomass, ammonium and phosphate concentration). The uncertainty results revealed a need to apply offline calibration methods to improve model performance., This research work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO, Projects CTM2014-54980-C2-1-R, CTM2014-54980-C2-2-R, CTM2017-86751-C2-1-R and CTM2017-86751-C2-2-R) jointly with the European Regional Development Fund (ERDF) , both of which are gratefully acknowledged. It was also supported by the Spanish Ministry of Education, Culture and Sport via a pre-doctoral FPU fellowship to author Stephanie Aparicio (FPU/15/02595) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting nutrient recovery from AnMBR effluent by means of electrodialysis technology: Operating parameters assessing

  • Ruiz-Barriga, Patricia
  • Bouzas, A.
  • Carrillo-Abad, Jordi
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
[EN] This work describes a comprehensive assessment of operating parameters of a bench-scale electrodialysis (ED) plant for nutrient concentration from an Anaerobic Membrane BioReactor (AnMBR) effluent. The ED bench-scale plant serves a dual purpose. Firstly, to generate a concentrated stream with a high nutrient content, and secondly, to produce high-quality reclaimed water in the diluted stream, both sourced from real wastewater coming from the effluent of an AnMBR. Two sets of experiments were conducted: 1) short-term experiments to study the effect of some parameters such as the applied current and the type of anionic exchange membrane (AEM), among others, and 2) a long-term experiment to verify the feasibility of the process using the selected parameters. The results showed that ED produced concentrated ammonium and phosphate streams using a 10-cell pair stack with 64 cm(2) of unitary effective membrane area, working in galvanostatic mode at 0.24 A, and operating with an Acid-100-OT anionic exchange membrane. Concentrations up to 740 mg/L and 50 mg/L for NH4-N and PO4-P, respectively, were achieved in the concentrated stream along with removal efficiencies of 70% for ammonium and 60% for phosphate in the diluted stream. The average energy consumption was around 0.47 kWh.m(-3)., This research work has been supported by the Spanish Ministry of Science and Innovation by "RECREATE" (PID2020-114315RB-C21/22) and "MEM4REC" (CTM2017-86751-C2-1/2-R) projects, jointly with the European Regional Development Fund (ERDF) , which are gratefully acknowledged.