Pasar al contenido principal

META-ACOPLADOR PARA RECONFIGURACION DE EMISIONES EN LASERES INTEGRADOS

PID2024-162261NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strong Mode Coupling and Maximum Directional Absorption in Reciprocal Bianisotropic Metasurfaces

  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Amrahi, B.
  • Asadchy, V. S.
[EN] Electromagnetic mode coupling plays a key role in many resonant effects in nanophotonics. This coupling is also responsible for the appearance of bianisotropy, where electric and magnetic responses become interconnected through the interaction of their respective modes. In this work, we develop a simple and general temporal coupled-mode theory model to describe off-diagonal chiral bianisotropy. Using quasi-bound states in the continuum (q-BICs), we demonstrate how to control the hybridization of modes with opposite symmetries, resulting in Rabi-like splitting between the hybrid states in the regime of strong electromagnetic mode coupling. Beyond revealing the physical origin of the hybrid modes, our model predicts and explains the emergence of dual-band asymmetric reflection and absorption and how to achieve the maximum directional absorption difference. The theoretical predictions are verified by full-wave simulations, showing very good agreement with theory. Furthermore, very strong reciprocal bianisotropy is demonstrated with the use of q-BICs in a deeply subwavelength metasurface in the optical frequency range. Our results provide a clear physical picture of the interaction process between modes, offering a compact theoretical framework for understanding and designing bianisotropic dielectric metasurfaces not only in the traditional regime but also in the strong coupling regime., This work was supported by Agencia Estatal de Investigacion (Grants PID2024-162261NB-I00 and CNS2024-154715), Generalitat Valenciana under the PROMETEO Program (CIPROM/2022/14), Universitat Politecnica de Valencia (Grant PAID-01-23), and the Academy of Finland (Grants 356797, 320167, and 368652)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting sensing performance through near-field engineering in low-Q metasurfaces

  • Alvarez-Sanchis, Jose Antonio|||0000-0002-5015-5401
  • Máñez-Espina, Luis Manuel|||0000-0002-3633-3734
  • Mengual Chulia, Teresa|||0000-0001-9609-2234
  • Griol Barres, Amadeu
  • Diaz Rubio, Ana|||0000-0002-0115-1834
[EN] Dielectric metasurfaces have introduced a new paradigm for substance detection by exploiting their resonant properties to enhance light¿matter interaction. This enhancement can be used for sensing either through refractive index changes or through absorption-based mechanisms. Most works focus on high¿quality factor resonators, aiming to increase field confinement in the vicinity of the resonant structure to improve sensitivity. In this work, we explore an alternative approach based on low¿quality factor, fully dielectric metasurfaces, with engineered modes to enhance near-field concentration. We investigate different topologies that, despite their low quality factors, achieve sensitivity and detection performance beyond what is typically reported for low¿Q structures in the literature. This improvement is enabled by near-field engineering of the evanescent modes, allowing us to control the spatial distribution of the electromagnetic field and maximize its overlap with the analyte. Our results show that careful mode engineering provides a powerful strategy to boost sensing performance without relying on ultra-high-Q resonances., Agencia Estatal de Investigación (PID2024-162261NB-I00, CNS2024-15471); Generalitat Valenciana (CIPROM/2022/14); Universitat Politècnica de València (PAID-01-23, POLISABIO2024-P18); European Commission (101093042).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design, Fabrication, and Characterization of Graphene-Silicon Nitride Integrated Mode Filters

  • Martín-Romero, Fernando|||0009-0003-0930-3921
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Fontelles-Lopez, Oscar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present the design, fabrication, and characterization of broadband graphene-silicon nitride integrated mode filters working in the optical C-band, centered at a wavelength of 1.55 mu m. The devices presented here prevent modal crosstalk, thus avoiding signal degradation in multimode communication systems. In particular, the fabricated filters are based on a dual-mode silicon nitride waveguide, partially covered by a centered graphene nanoribbon that induces a stronger absorption for the TE0 mode than for the TE1 mode. The geometry of the design has been optimized to minimize the length and insertion losses of the device. A complete fabrication process, including the transfer and lithography of commercial graphene, has been developed. A novel approach was introduced during the etching step, which entailed the simultaneous curing of the resist to encapsulate the graphene nanoribbons prior to the deposition of the upper cladding. Finally, transmission through an array of fully fabricated filters of varying lengths was characterized with a measurement setup employing optical fiber coupling. The maximum experimentally measured contrast between the TE0 and TE1 modes is 123 dB/cm, achieved at a wavelength of 1569 nm, simultaneously with a minimum loss of -38 dB/cm for the TE1 mode. Overall, we fully demonstrate an integrated mode filter based on commercial graphene that paves the way for the implementation of integrated multimode optical communication systems., F.M.-R. acknowledges financial support from the Generalitat Valenciana (CIACIF/2022/188). M.S.L. and V.J.G. acknowledge financial support from the Generalitat Valenciana (CIAPOS/2021/293, CDEIGENT/2020/009, and ES-GENT/2024/17). M.S.L. acknowledges Ayuda a Primeros Proyectos de Investigacion (PAID-06-24), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV). V.J.G. acknowledges the AGENCIA ESTATAL DE INVES-TIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". All authors acknowledge financial support from the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2024-162261NB-I00) and to the European Regional Development Fund (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.