Pasar al contenido principal

CRECIMIENTO SELECTIVO DE NANOSELLOS DE GRAFENO PARA DISPOSITIVOS FOTONICOS INTEGRADOS

PID2020-118855RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Raman Detection of 5-Amino-2-mercaptobenzimidazole Self-Assembled Monolayers in Nanoparticle-on-a-Mirror Plasmonic Cavity Driven by Dielectric Waveguides

  • Redolat-Querol, Javier Abilio
  • Camarena, Maria
  • Vázquez-Lozano, Juan Enrique
  • Miele, Ermanno
  • Baumberg, Jeremy J.
  • Griol Barres, Amadeu
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] Functionalization of metallic surfaces by molecular monolayers is a key process in fields such as nanophotonics or biotechnology. To strongly enhance light¿matter interaction in such monolayers, nanoparticle-on-a-mirror (NPoM) cavities can be formed by placing metal nanoparticles on such chemically functionalized metallic monolayers. In this work, we present a novel functionalization process of gold surfaces using 5-amino-2- mercaptobenzimidazole (5-A-2MBI) molecules, which can be used for upconversion from THz to visible frequencies. The synthesized surfaces and NPoM cavities are characterized by Raman spectroscopy, atomic force microscopy (AFM), and advancing¿receding contact angle measurements. Moreover, we show that NPoM cavities can be efficiently integrated on a silicon-based photonic chip performing pump injection and Raman-signal extraction via silicon nitride waveguides. Our results open the way for the use of 5-A-2MBI monolayers in different applications, showing that NPoM cavities can be effectively integrated with photonic waveguides, enabling on-chip enhanced Raman spectroscopy or detection of infrared and THz radiation., We acknowledge funding from the European Commission (THOR project, Grant Agreement No. 829067, and NextGenerationEU /PRTR and ERDF A way of making Europe ), Generalitat Valenciana under grant CIPROM/2022/14, and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under project grant PID2021-124618NB-C21. E.P.-C gratefully acknowledges funding from Generalitat Valenciana (Grant No. SEJIGENT/2021/039), AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). J.E.V.-L. acknowledges support from Juan de la Cierva−Formación fellowship FJC2021-047776-I. M.S.L. acknowledges support from the Generalitat Valenciana (Project: CIAPOS/2021/293) and AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00). J.R. acknowledges funding from Universitat Politecnica ̀ de Valencia ̀ (Grant No. FPI 20-10253).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasma-Induced Surface Modification of Sapphire and Its Influence on Graphene Grown by Plasma-Enhanced Chemical Vapour Deposition

  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Kovylina-Zabyako, Miroslavna
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Bernat-Montoya, Ignacio
  • Boscá Mojena, Alberto
[EN] In this work, we study the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapor deposition. The different terminations of the sapphire surface are controlled by a plasma process. A design of experiments procedure was carried out to evaluate the major effects governing the plasma process of four different parameters: i.e., discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface and the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analyzed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and, depending on the sapphire terminated surface, are bound either to vacancy or boundary-like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination, paves the way for increasing the crystallinity of the synthesized graphene., M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/ 2020/009). E.P.C. acknowledges financial support from the Generalitat Valenciana (SEJIGENT/2021/ 039). All authors acknowledge financial support from AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid dielectric-graphene nanostructured SERS substrates for antibody sensing

  • Redolat-Querol, Javier Abilio
  • Pérez, Maria Camarena
  • Zorina, Sofiya
  • Zafra, Eva
  • Alonso Chornet, Mar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • González-Llacer, Ignacio
  • Díaz-Escobar, Evelyn
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] We present a hybrid surface-enhanced Raman spectroscopy (SERS) platform based on a nanostructured silicon substrate integrated with functionalized graphene for the selective detection of biomolecules such as prolactin and SARS-CoV-2 antibodies. The high-index substrate comprises an array of subwavelength silicon nanopillars that support Mie-type optical resonances, enabling strong electromagnetic field confinement with minimal heating and optical losses. Graphene monolayers are transferred onto the nanopillar array and functionalized using 1-pyrenebutanoic acid succinimidyl ester (PBASE), thus facilitating the selective immobilization of target antibodies via ¿¿¿ interactions and covalent bonding. Graphene transfer, functionalization, and analyte binding are confirmed by the SERS enhancement, which enables label-free detection at low laser power, avoiding photodamage and ensuring compatibility with sensitive biomolecules. Strain and doping analysis, performed through Raman vector decomposition, reveals distinct responses associated with each antibody, validating the sensor's capability for molecular discrimination., A. M. and E. P. C acknowledge funding from Generalitat Valenciana (GVA) under grants CIPROM/2022/14 (NIRVANA) and AP2020-33 (GRAFEBIOCOV). E. P. C. further acknowledges financial support from the GVA through grant SEJIGENT/2021/ 039, Agencia Estatal de Investigaci¿on, Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI), through project PID2021-128442NA-I00 and through grant CNS2024-154922, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M.S.L. and V. J. G. acknowledge financial support from the GVA through grants CIAPOS/2021/293, CDEIGENT/2020/009, and ESGENT/2024/17; and MCIN/AEI through project PID2020-118855RB-I00. M. S. L. also acknowledges support from the Ayuda a Primeros Proyectos de Investigación (PAID-06-24), funded by the Vicerrectorado de Investigación of the Universitat Politècnica de València (UPV). V. J. G. further acknowledges support from the MCIN/AEI through grant CNS2023-145093, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. C. P. acknowledges the SPARCLE consortium, and Delft University of Technology. This study also forms part of the Advanced Materials program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by GVA through project MFA/2022/025 (ARCANGEL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Imaging Cloaked Objects: Diffraction Tomography of Realistic Invisibility Devices

  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Martí Sendra, Javier
  • García Meca, Carlos
[EN] Invisibility cloaks have become one of the most outstanding developments among the wide range of applications in the field of metamaterials. So far, most efforts in invisibility science have been devoted to achieving practically realizable cloak designs and to improving the effectiveness of these devices in reducing their scattering cross-section (SCS), a scalar quantity accounting for the total electromagnetic energy scattered by an object. However, little attention has been paid to the opposite side of the technology: the development of more efficient techniques for the detection of invisibility devices. For instance, the SCS ignores the phase change introduced by the cloak, as well as the angular dependence of the incident and scattered waves. Here, a different path is proposed, which takes advantage of the smarter way in which diffraction tomography processes all this overlooked information to improve the efficiency in unveiling the presence of invisibility devices. This approach not only results in a considerable sensitivity enhancement in the detection of different kinds of cloaks based on both scattering cancellation and transformation optics, but also enables us to obtain images depicting the approximate shape and size of the cloak. The proposed method can be extended to the detection of sound cloaks., F.J.D.-F. acknowledges funding from project TEC2015-63838-C3-1-R OP-TONANOSENS (MINECO/FEDER, European Union) under grant FPI BES-2016-076818 and funding for open access charge: CRUE-Universitat Politecnia de Valencia. J. M. acknowledges funding from ICTS-2017-28-UPV-9 (FEDER EU, UPV), PROMETEO/2019/123 (Generalitat Valenciana) and INCONN/20210/10. The authors acknowledge grant PID2020-118855RB-I00 funded by MCIN/AEI/10.13039/501100011033. Correction added on February 10th, 2023: one funding source added.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design, Fabrication, and Characterization of Graphene-Silicon Nitride Integrated Mode Filters

  • Martín-Romero, Fernando|||0009-0003-0930-3921
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Fontelles-Lopez, Oscar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present the design, fabrication, and characterization of broadband graphene-silicon nitride integrated mode filters working in the optical C-band, centered at a wavelength of 1.55 mu m. The devices presented here prevent modal crosstalk, thus avoiding signal degradation in multimode communication systems. In particular, the fabricated filters are based on a dual-mode silicon nitride waveguide, partially covered by a centered graphene nanoribbon that induces a stronger absorption for the TE0 mode than for the TE1 mode. The geometry of the design has been optimized to minimize the length and insertion losses of the device. A complete fabrication process, including the transfer and lithography of commercial graphene, has been developed. A novel approach was introduced during the etching step, which entailed the simultaneous curing of the resist to encapsulate the graphene nanoribbons prior to the deposition of the upper cladding. Finally, transmission through an array of fully fabricated filters of varying lengths was characterized with a measurement setup employing optical fiber coupling. The maximum experimentally measured contrast between the TE0 and TE1 modes is 123 dB/cm, achieved at a wavelength of 1569 nm, simultaneously with a minimum loss of -38 dB/cm for the TE1 mode. Overall, we fully demonstrate an integrated mode filter based on commercial graphene that paves the way for the implementation of integrated multimode optical communication systems., F.M.-R. acknowledges financial support from the Generalitat Valenciana (CIACIF/2022/188). M.S.L. and V.J.G. acknowledge financial support from the Generalitat Valenciana (CIAPOS/2021/293, CDEIGENT/2020/009, and ES-GENT/2024/17). M.S.L. acknowledges Ayuda a Primeros Proyectos de Investigacion (PAID-06-24), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV). V.J.G. acknowledges the AGENCIA ESTATAL DE INVES-TIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". All authors acknowledge financial support from the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2024-162261NB-I00) and to the European Regional Development Fund (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.