Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Diseño y optimización de estructuras tipo diana y caracterización de puntos cuánticos de InAs para emisión de fotón único, Design and Optimization of Bullseye-type Structures and Characterization of InAs Quantum Dots for Single Photon Emission, Disseny i optimització d&apos, estructures de tipus diana i caracterització de punts quàntics d&apos, InAs per a l&apos, emissió de fotons únics

  • Ainoo Pérez, Debinamaca
[ES] En este trabajo de fin de grado se estudian y optimizan estrucutras tipo diana basadas en puntos cuánticos de InAs embebidos en una matriz de GaAs. Los puntos cuánticos de InAs fueron crecidos sobre sustratos de GaAs mediante epitaxia de haces moleculares. La caracterización estructural y óptica de los puntos cuánticos se lleva a cabo mediante microscopía electrónica de barrido (SEM) y catodoluminiscencia espectroscópica (CL), permitiendo localizar y analizar las propiedades emisivas de los puntos cuánticos. Paralelamente, se realiza una optimización numérica de las estructuras tipo diana destinadas a albergar los puntos cuánticos, con el objetivo de maximizar la direccionalidad y eficiencia de extracción de los fotones emitidos. Para la optimización de la estructura diana se utilizan simulaciones finite-difference time-domain (FDTD) en RSoft. Este estudio contribuye al diseño de estructuras fotónicas integradas para aplicaciones en comunicaciones cuánticas y tecnologías fotónicas avanzadas., [EN] In this work, bullseye-type structures based on InAs quantum dots embedded in a GaAs matrix are design and optimized. The InAs quantum dots were grown on GaAs substrates using molecular beam epitaxy. Structural and optical characterization of the quantum dots is carried out using scanning electron microscopy (SEM) and spectroscopic cathodoluminescence (CL), allowing for the localization and analysis of the emissive properties of the quantum dots. Simultaneously, a numerical optimization of bullseye-type structures intended to host the quantum dots is performed, with the aim of maximizing the directionality and extraction efficiency of the emitted photons. Finite-difference time-domain (FDTD) simulations in RSoft are used for the optimization of the structure. This study contributes to the design of integrated photonic structures for applications in quantum communications and advanced photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid dielectric-graphene nanostructured SERS substrates for antibody sensing

  • Redolat-Querol, Javier Abilio
  • Pérez, Maria Camarena
  • Zorina, Sofiya
  • Zafra, Eva
  • Alonso Chornet, Mar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • González-Llacer, Ignacio
  • Díaz-Escobar, Evelyn
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] We present a hybrid surface-enhanced Raman spectroscopy (SERS) platform based on a nanostructured silicon substrate integrated with functionalized graphene for the selective detection of biomolecules such as prolactin and SARS-CoV-2 antibodies. The high-index substrate comprises an array of subwavelength silicon nanopillars that support Mie-type optical resonances, enabling strong electromagnetic field confinement with minimal heating and optical losses. Graphene monolayers are transferred onto the nanopillar array and functionalized using 1-pyrenebutanoic acid succinimidyl ester (PBASE), thus facilitating the selective immobilization of target antibodies via ¿¿¿ interactions and covalent bonding. Graphene transfer, functionalization, and analyte binding are confirmed by the SERS enhancement, which enables label-free detection at low laser power, avoiding photodamage and ensuring compatibility with sensitive biomolecules. Strain and doping analysis, performed through Raman vector decomposition, reveals distinct responses associated with each antibody, validating the sensor's capability for molecular discrimination., A. M. and E. P. C acknowledge funding from Generalitat Valenciana (GVA) under grants CIPROM/2022/14 (NIRVANA) and AP2020-33 (GRAFEBIOCOV). E. P. C. further acknowledges financial support from the GVA through grant SEJIGENT/2021/ 039, Agencia Estatal de Investigaci¿on, Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI), through project PID2021-128442NA-I00 and through grant CNS2024-154922, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M.S.L. and V. J. G. acknowledge financial support from the GVA through grants CIAPOS/2021/293, CDEIGENT/2020/009, and ESGENT/2024/17; and MCIN/AEI through project PID2020-118855RB-I00. M. S. L. also acknowledges support from the Ayuda a Primeros Proyectos de Investigación (PAID-06-24), funded by the Vicerrectorado de Investigación of the Universitat Politècnica de València (UPV). V. J. G. further acknowledges support from the MCIN/AEI through grant CNS2023-145093, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. C. P. acknowledges the SPARCLE consortium, and Delft University of Technology. This study also forms part of the Advanced Materials program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by GVA through project MFA/2022/025 (ARCANGEL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Formation Mechanisms of (In,Ga)N Nanoshells Conformally Grown around Pencil-like GaN Nanowires

  • Obradovic, Jovana
  • Tinoco, Miguel
  • Torres-Pardo, Almudena
  • Fernandez-Garrido, Sergio
  • Guzman, Alvaro
  • Gacevic, Zarko
  • Monge-Bartolome, Laura
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present a comprehensive study on the formation mechanisms of (In,Ga)N nanoshells conformally grown around pencil-like GaN nanowires by plasma-assisted molecular beam epitaxy. A detailed growth model is proposed, describing the morphological evolution of the nanoshell tip from an initial truncated pyramid to the final pyramidal form. This transformation is likely driven by the minimization of surface energy of the growing nanocrystal, more precisely, by a change in the preferential semipolar growth plane, from the r-plane (1012), for the GaN nanowire core, to the s-plane (1011), for the overgrown (In,Ga)N nanoshell. Furthermore, we investigate the facet- and temperature-dependent incorporation of indium, showing that the indium content is higher at the nanowire tip than on the sidewalls and decreases with increasing growth temperature across all facets. Finally, by making simple approximations, we provide quantitative estimations of the indium concentration in the nanoshell, offering partial quantitative insight into the composition profile. These findings contribute to the understanding and more precise control of (In,Ga)N nanoshell growth for employment in nanowire-based optoelectronic devices., This work has been supported by the project Madrid Quantum funded by the European Union Next Generation, PRTR-C17.I1, MCIN/AEl/10.13039/501100011033 and by project NextGen-SPS, PID2022-136626OB-C31 found by the Spanish Ministry of Science. We also acknowledge the financial support provided by the European COST Action OPERA (CA-20116) through the short-term scientific mission program and use of the Spanish ICTS Network MICRONANOFABS for the realization of this work. V.J.G. acknowledges financial support from the Generalitat Valenciana (ESGENT/2024/17), AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR" and Grant EQC2021-007244-P. This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design, Fabrication, and Characterization of Graphene-Silicon Nitride Integrated Mode Filters

  • Martín-Romero, Fernando|||0009-0003-0930-3921
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Fontelles-Lopez, Oscar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present the design, fabrication, and characterization of broadband graphene-silicon nitride integrated mode filters working in the optical C-band, centered at a wavelength of 1.55 mu m. The devices presented here prevent modal crosstalk, thus avoiding signal degradation in multimode communication systems. In particular, the fabricated filters are based on a dual-mode silicon nitride waveguide, partially covered by a centered graphene nanoribbon that induces a stronger absorption for the TE0 mode than for the TE1 mode. The geometry of the design has been optimized to minimize the length and insertion losses of the device. A complete fabrication process, including the transfer and lithography of commercial graphene, has been developed. A novel approach was introduced during the etching step, which entailed the simultaneous curing of the resist to encapsulate the graphene nanoribbons prior to the deposition of the upper cladding. Finally, transmission through an array of fully fabricated filters of varying lengths was characterized with a measurement setup employing optical fiber coupling. The maximum experimentally measured contrast between the TE0 and TE1 modes is 123 dB/cm, achieved at a wavelength of 1569 nm, simultaneously with a minimum loss of -38 dB/cm for the TE1 mode. Overall, we fully demonstrate an integrated mode filter based on commercial graphene that paves the way for the implementation of integrated multimode optical communication systems., F.M.-R. acknowledges financial support from the Generalitat Valenciana (CIACIF/2022/188). M.S.L. and V.J.G. acknowledge financial support from the Generalitat Valenciana (CIAPOS/2021/293, CDEIGENT/2020/009, and ES-GENT/2024/17). M.S.L. acknowledges Ayuda a Primeros Proyectos de Investigacion (PAID-06-24), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV). V.J.G. acknowledges the AGENCIA ESTATAL DE INVES-TIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". All authors acknowledge financial support from the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2024-162261NB-I00) and to the European Regional Development Fund (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Diseño, simulación y caracterización de plantillas basadas en GaSb y estructuras fotónicas pasivas de nitruro de silicio para la integración monolítica de láseres en el infrarrojo medio., Design, simulation, and characterization of GaSb-based templates and passive photonic structures based on silicon nitride for the monolithic integration of mid-infrared lasers., Diseny, simulació i caracterització de plantilles basades en GaSb i estructures fotòniques basades en nitrur de silici per a la integració monolítica de làsers en el infraroig medi.

  • Peiró Codoñer, Alicia
[ES] La fotónica integrada es una disciplina clave en el desarrollo de nuevas tecnologías en telecomunicaciones, sensores y computación, entre otras. En este contexto, los circuitos fotónicos permiten la manipulación y propagación de la luz, mientras que los láseres actúan como fuente de emisión. Este trabajo de fin de grado abarca tanto una parte teórica como una experimental. La investigación llevada a cabo en este trabajo se enmarca en el proyecto de consolidación investigadora del Prof. Víctor J. Gómez (tutor de este trabajo) financiado por la agencia estatal de investigación del Ministerio de Ciencia, Innovacion y Universidades GABRIEL (láseres basados en GaSb integrados epitaxialmente en chips fotonicos de silicio), CNS2023-145093, 399.530,00 . Además, también se enmarca en el proyecto Advanced Nano-Photonic Devices Based On Plasmonic Metamarials (ESGENT/2024/17) financiado por la Generalitat Valenciana 43.698,33 , y el proyecto CUPIDO: Desarrollo de cirCUitos fotónicos cuánticos integrados basados en Puntos cuántIcos e híbriDOs semiconductores III-V y Silicio a nivel de oblea (COMCUANTICA/003, 150.000,00 ). Los tres proyectos son liderados por el Prof. Víctor J. Gómez. Además, los resultados de este trabajo han sido aceptados como contribuciones orales en dos congresos internacionales: Compound Semiconductor Week (CSW) 2025, celebrado del 27 al 30 de mayo de 2025 en el Banff Centre for Arts and Creativity, Canadá; y WOCSDICE - EXMATEC 2025, que se celebrará del 16 al 20 de junio de 2025 en Cádiz, España. También se colabora activamente con equipos de investigación de la Cardiff University y el CNRS. En la parte teórica del trabajo, se abordan dos desafíos clave en el diseño de circuitos fotónicos altamente integrados: (i) el acoplamiento de la luz desde un láser integrado monolíticamente hacia una guía de ondas, y (ii) la eficiencia de transmisión de la luz que se propaga dentro de la guía a una fibra óptica a través de un grating coupler. Para ello, se realizan simulaciones ópticas con el software RSoft, utilizando plataformas en nitruro de silicio (SiN). El láser en cuestión emite a la longitud de onda de 2.3 µm, en el rango del infrarrojo medio (MIR). En la parte experimental, se lleva a cabo la caracterización de materiales empleados en la integración monolítica de láseres de antimoniuro de galio (GaSb) sobre sustratos de silicio (Si). Se identifican y cuantifican dislocaciones en las capas crecidas mediante microscopía electrónica de contraste por canalización (ECCI), una técnica de la microscopía electrónica de barrido (SEM). Este análisis proporciona información esencial para optimizar los procesos de crecimiento de materiales. Como conclusión, este trabajo permitirá avanzar en el conocimiento y diseño de componentes fotónicos en la región del infrarrojo medio, contribuyendo al desarrollo de nuevas tecnologías ópticas integradas., [EN] Integrated photonics is a key discipline in the development of new technologies in telecommunications, sensing, and computing, among others. In this context, photonic circuits allow the manipulation and propagation of light, while lasers act as the emission source. This bachelor s thesis includes both a theoretical and an experimental component. The research carried out in this work is part of the research consolidation project led by Prof. Víctor J. Gómez (supervisor of this thesis), funded by the Spanish State Research Agency of the Ministry of Science, Innovation and Universities: GABRIEL (lasers based on GaSb epitaxially integrated on silicon photonic chips), CNS2023-145093, 399,530.00. It also falls under the project Advanced Nano-Photonic Devices Based On Plasmonic Metamaterials (ESGENT/2024/17), funded by the Generalitat Valenciana with 43,698.33, and the project CUPIDO: Development of Integrated Quantum Photonic Circuits Based on Quantum Dots and Hybrid III-V and Silicon Semiconductors at Wafer Level (COMCUANTICA/003, 150,000.00). All three projects are led by Prof. Víctor J. Gómez. In addition, the results of this work have been accepted as oral contributions in two international conferences: Compound Semiconductor Week (CSW) 2025, held from May 27 to 30, 2025 at the Banff Centre for Arts and Creativity, Canada; and WOCSDICE - EXMATEC 2025, which will be held from June 16 to 20, 2025 in Cádiz, Spain. There is also active collaboration with research teams from Cardiff University and CNRS. In the theoretical part of the thesis, two key challenges in the design of highly integrated photonic circuits are addressed: (i) coupling light from a monolithically integrated laser into a waveguide, and (ii) the transmission efficiency of the light propagating within the waveguide to an optical fiber through a grating coupler. To this end, optical simulations are performed using the RSoft software, employing silicon nitride (SiN) platforms. The laser in question emits at a wavelength of 2.3 µm, in the mid-infrared (MIR) range. In the experimental part, the characterization of materials used in the monolithic integration of gallium antimonide (GaSb) lasers on silicon (Si) substrates is carried out. Dislocations in the grown layers are identified and quantified using electron channeling contrast imaging (ECCI), a scanning electron microscopy (SEM) technique. This analysis provides essential information to optimize material growth processes. In conclusion, this work will advance the knowledge and design of photonic components in the mid-infrared region, contributing to the development of new integrated optical technologies., [CA] La fotònica integrada és una disciplina clau en el desenvolupament de noves tecnologies en telecomunicacions, sensors i computació, entre altres. En aquest context, els circuits fotònics permeten la manipulació i propagació de la llum, mentre que els làsers actuen com a font d’emissió. Aquest treball de fi de grau abasta tant una part teòrica com una d’experimental. La investigació duta a terme en aquest treball s’emmarca en el projecte de consolidació investigadora del professor Víctor J. Gómez (tutor d’aquest treball), finançat per l’agència estatal d’investigació del Ministeri de Ciència, Innovació i Universitats GABRIEL (làsers basats en GaSb integrats epitaxialment en xips fotònics de silici), CNS2023-145093, 399.530,00 €. A més, també s’emmarca en el projecte Advanced Nano-Photonic Devices Based On Plasmonic Metamaterials (ESGENT/2024/17) finançat per la Generalitat Valenciana amb 43.698,33 €, i en el projecte CUPIDO: Desenvolupament de circuits fotònics quàntics integrats basats en punts quàntics i híbrids semiconductors III-V i silici a nivell d’oblea (COMCUANTICA/003, 150.000,00 €). Els tres projectes estan liderats pel professor Víctor J. Gómez. A més, els resultats d'este treball han sigut acceptats com a contribucions orals en dos congressos internacionals: Compound Semiconductor Week (CSW) 2025, celebrat del 27 al 30 de maig de 2025 en el Banff Centre for Arts and Creativity, el Canadà; i WOCSDICE - EXMATEC 2025, que se celebrarà del 16 al 20 de juny de 2025 a Cadis, Espanya. També es col·labora activament amb equips d'investigació de la Cardiff University i el CNRS. En la part teòrica del treball, s'aborden dos desafiaments clau en el disseny de circuits fotònics altament integrats: (i) l'acoblament de la llum des d'un làser integrat monolíticament cap a una guia d'ones, i (ii) l'eficiència de transmissió de la llum que es propaga dins de la guia a una fibra òptica a través d'un grating coupler. Per a això, es realitzen simulacions òptiques amb el programari RSoft, utilitzant plataformes en nitrur de silici (Sense). El làser en qüestió emet a la longitud d'ona de 2.3 µm, en el rang de l'infraroig mitjà (MIR). En la part experimental, es duu a terme la caracterització de materials emprats en la integració monolítica de làsers d'antimoniur de gal·li (GaSb) sobre substrats de silici (Si). S'identifiquen i quantifiquen dislocacions en les capes crescudes mitjançant microscòpia electrònica de contrast per canalització (ECCI), una tècnica de la microscòpia electrònica d'escombratge (SEM). Esta anàlisi proporciona informació essencial per a optimitzar els processos de creixement de materials. Com a conclusió, este treball permetrà avançar en el coneixement i disseny de components fotònics a la regió de l'infraroig mitjà, contribuint al desenrotllament de noves tecnologies òptiques integrades.