Pasar al contenido principal

METODOLOGIAS AVANZADAS PARA PREDICCION DE DAÑO Y ESTIMACION DE VIDA EN SERVICIO EN COMPONENTES AERONAUTICOS

PID2023-151610OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fracture toughness of Ti-6Al-4V and Ti-6Al-4V ELI alloys fabricated by electron beam melting with different orientation and positions

  • Niñerola, Rubén
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] This paper provides an analysis of the change in fracture toughness of Ti-6Al-4V and Ti-6Al-4V ELI alloys caused by electron beam melting process. This additive manufacturing technology shows a characteristic metallographic formation: a columnar grain oriented parallel to the building direction that produces an anisotropic mechanical behavior. We present an evaluation of how the microstructural gradient affects mechanical properties, in different orientations and positions in the bottom zone of the manufacturing region. Fracture toughness was analyzed in four orientations, two parallel and two perpendicular to beta columnar grains. Microstructural and mechanical changes are associated with the thermal gradient in the powder bed which produces a cooling rate gradient. Microstructural characteristics vary with respect to vertical position, decreasing hardness and increasing fracture toughness with height. Crack propagation is strongly influenced by the alpha grain boundary. Chemical analyses have been carried out to determine the level of interstitial elements., This research is part of the R+D+i project PID2023-151610OB-C22, funded by the Spanish Ministry of Science, Innovation and Universities MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The funding of the Generalitat Valenciana through Programme PROMETEO 2021/046 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid fatigue life estimation of drilled CFRP laminates and titanium stacks using thermography

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Miguélez, María Henar
[EN] In this work, we estimate the fatigue life of drilled Carbon Fiber Reinforced Polymer (CFRP) laminates making use of the temperature evolution of the component. As the self-heating effect due to cyclic loading causes a temperature change in the initial stages of the loading, the slope of the temperature variation ¿T versus the number of cycles can be used to estimate the remaining life. We have validated the applicability of the procedure for drilled laminates under different cutting conditions, and for drilled Ti-CFRP stacks. Infrared thermography was used to obtain the temperature variation during cycling loading. The results proved that the obtained adjusted model can effectively estimate the fatigue life of CFRP laminates with delamination damage or thermal damage with an error of 15%, proving the usefulness of this methodology for drilled and stacked laminates., This research is part of the R + D + i project PID2020-118480RBC21,-C22, and PID2023-151610OB-C21,-C22, funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe . Grant PRE2018-086277 funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future . The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046 and project GV/2021/060 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of drilling operations on the fatigue performance of CFRP and CFRP/Ti hybrid structures using a thermographic approach

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Miguélez, María Henar
[EN] This study investigates the use of infrared thermography as a non-destructive technique to predict the fatigue life of carbon fiber-reinforced polymer (CFRP) laminates, with and without titanium (Ti) stacking, assessing the impact of drilling-induced damage. Drilling, essential for creating mechanical joints, introduces defects that significantly reduce the fatigue life of CFRP. Several models based on data obtained from infrared thermography were applied. These models rely on different parameters from the temperature curve during the test, such as the initial and final slope, the stable temperature in the second phase, or the total dissipated energy. Using these data, it is possible to estimate the remaining fatigue life or the fatigue limit of the material. The results show that models based on the initial slope of the temperature curve provide accurate estimates with errors close to 10%, while models using the stabilized temperature exhibit errors around 19%. Although final-phase models were less accurate, methods based on total dissipated energy effectively predict fatigue limits. Overall, the study demonstrated an average accuracy of 15% in fatigue life prediction under various damage conditions, validating infrared thermography as an effective tool for structural integrity assessment in industrial applications., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is part of the R+D+i projects PID2023-151610OB-C21 and PID2023-151610OB-C22, funded by MCIN/AEI/10.13039/501100011033 and by ERDF: A way of making Europe. Grant PRE2018-086277 funded by MCIN/ AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Damage mechanism identification in additive manufactured extruded polymer via acoustic emission technique, experimental testing and pattern recognition models

  • Barriga-Machado, Byron|||0000-0003-4522-3833
  • Infante-García, Diego|||0000-0001-6010-2031
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Hernández-Casamayor, Álvaro
[EN] This work presents a novel framework for identifying damage mechanisms in material extrusion-based additive manufacturing parts, combining acoustic emission (AE) analysis with unsupervised and hybrid supervised learning techniques. The main objective is to characterize failure modes in polylactic acid specimens and demonstrate the practical potential of data-driven AE analysis for early damage detection and quantification in polymeric additive manufacturing. Extending the current state of the art, the novelty of this study lies in the exploration of multiple clustering algorithms through two approaches: (i) unsupervised learning comparing k-means and density-based spatial clustering of noise-based applications (DBSCAN) combined with fast Fourier transform (FFT) for feature extraction and (ii) a hybrid supervised deep learning approach using a convolutional neural network (CNN) trained on spectrograms from the continuous wavelet transform (CWT). While these approaches have been applied in fields such as composite materials, this is the first work to transfer and validate their use in extrusion-based polymer specimens. The experimental campaign based on different stack configurations of additive extruded samples provides ground-truth fracture observations for model assessment. As a result, DBSCAN proved to be effective in the classification process, identifying two distinct clusters: one with relatively low frequencies up to 260 kHz and another with high frequencies between 270 and 390 kHz. The correlations between these groups and the failure mechanisms were established by visually inspecting the fractured specimens. On the other hand, the hybrid approach combined the labels obtained from the DBSCAN model and the time-frequency features extracted from the signal spectrograms, achieving results consistent with the unsupervised approach. Finally, after enhancing the model performance through successive revisions via experimental correlation of different data-driven analysis pipelines, the present research offers a practical, rapid, and non-destructive tool for in-situ damage detection in polymeric additive manufacturing, contributing to structural health monitoring and process optimization., This research is part of the R+D+i project PID2023-151610OB-C22, funded by MCIN/AEI, Spain/10.13039/501100011033 and by "ERDF: A way of making Europe", and grant PDC2021-121368-C22 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". The funding of the Generalitat Valenciana, Programme PROMETEO, Spain 2021/046 is also acknowledged. The authors also acknowledge the funding received by Universitat Politecnica de Valencia, Spain and CRUE through Programa de Ayudas de Investigacion y Desarrollo (PAID-01-23) and funding for open access.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical analyses of the interaction between rigid non-penetrating projectiles, soft and hard tissue simulants and composite ballistic protection

  • Gómez-Garraza, Samuel
  • Álvarez-Blanco, Mario
  • Miguélez, Beatriz
  • Loya, José Antonio
  • Marco, Miguel
  • Infante-García, Diego|||0000-0001-6010-2031
[EN] The study of ballistic personal protections often only focuses on the mechanical response and ballistic limits of the armor considered. However, understanding the armor-carrier interaction under dynamic conditions remains underexplored. This research analyzes non-penetrating ballistic impacts on gelatin samples involving multi-ply composite ballistic protection panels, focusing on biomechanical damage. For this purpose, ballistic gelatin is presented as a reliable soft tissue simulant and thoroughly examined under non-penetrating ballistic impact conditions. The methodology includes two experimental approaches: (1) lowvelocity impact tests using rigid projectiles to isolate gelatin's mechanical behavior and (2) high-velocity impact tests with steel spherical projectiles, involving additionally ballistic protection panels and a simplified bone surrogate as a hard tissue simulant. Due to the complexity of experimentally assessing the dynamic interaction between soft and hard tissue simulants, protection, and projectiles, an explicit finite element model has been developed. These simulations incorporate different damage models in composite protection and bone surrogate to accurately replicate the experimental tests. In addition, a proposed visco-hyperelastic constitutive model for ballistic gelatin is validated, generating a powerful predictive tool for evaluating ballistic protection and biomechanical damage. This work provides a comprehensive study of the behind armor blunt trauma and introduces an experimental methodology to quantify the mechanical response of ballistic gelatin and hard tissue simulants under nonpenetrating ballistic impacts. It addresses a key gap in modeling soft tissue simulants under high-energy conditions and validates the corresponding visco-hyperelastic constitutive model. Findings highlight the importance of considering hard tissue effects when evaluating composite protection performance, which has not been previously addressed in literature. This work proposes an alternative evaluation framework to the assessment of advanced armor and biomechanical phenomena estimation. We further provide a deeper biomechanical insight in comparison with existing standards, bridging the gap between multi-layered composite protection and the human biomechanical response., This work was supported by the Madrid Community, Spain [IND2020/IND-17413]; the Spanish Ministry of Culture and Sport and "European Union NextGenerationEU/PRTR" ["Gemelos digitales para el diseno biomecanico avanzado de protecciones de cabeza en deportes con riesgo de impacto" EXP_75127, Universidad Carlos III de Madrid]; the projects PID2023-151610OB-C22 and PID2020-118946RB-I00 funded by Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/https://doi.org/10.13039/501100011033)and FEDER, UE and the "European Union NextGenerationEU/PRTR" [PID2020-118480RB-C21, PDC2021-121368-C22].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring design strategies for patient-specific bone scaffolds to create a uniform mechanical environment in trabecular bone

  • Andrea Fresquet Monter
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Background and Objective: Large bone defects cannot be repaired by the inherent regeneration mechanisms of bone due to their size, which makes medical intervention essential. Current therapeutic treatments have their limitations, which has led to the study and development of bone scaffolds that maintain structural integrity during bone healing. Novel designs are required to create a mechanical environment that promote osseointegration. In this work, we aim to analyse the effect of patient-specific designs on the creation of a uniform mechanical environment in bone-scaffold constructs. Methods: Novel patient-specific Triply Periodic Minimal Surface (TPMS) structures were designed according to the characterisation of the microstructure of healthy and osteoporotic human cancellous bone to mimic morphometry. In addition, the assessment of the TPMS representative volume element size was also considered for scaffold design. The interaction between bone and scaffold was analysed through finite element model simulation. In those bone-scaffold assemblies we evaluated three different design strategies: (1) matching bone microstructure; (2) similar apparent compression elastic modulus; and (3) mimicking both the morphometry and the apparent modulus of trabecular bone. Results: The stress distribution in patient-specific TPMS scaffolds is 83.86 % similar to that of the targeted bone, significantly outperforming the 54.41 % similarity of non-patient-specific solutions. Conclusions: The design of novel patient-specific scaffolds based on a microstructure similar to cancellous bone allows a uniform stress distribution. Hence, matching both the bone morphometry and apparent elastic modulus is a key issue to reducing stress shielding phenomena and inducing osseointegration., The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2023-151610OB-C22 funded by MCIN/AEI /10.13039/501100011033, the Generalitat Valenciana PROMETEO/2021/046, CIGE/2023/110 and CIACIF/2023/454, and CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A simplified fatigue characterization of defective CFRP laminates with infrared thermography

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Fiber misalignment and out-of-plane waviness are defects encountered in composite material laminates. These defects are particularly prone to occur when adapting the laminate to angular or complex geometries. Using these defective laminates in aerospace applications can undermine their structural integrity and impact their mechanical properties. This work involves a study of applying infrared thermography techniques to estimate the fatigue limit based on the energy dissipated during tensile testing. Defect-free CFRP laminates and laminates with several out-of-plane waviness distributed along the sample and through the thickness are tested at various stress levels. Estimation of their fatigue limit using thermography is performed, and the results show a significant agreement to those obtained through S-N curves, with less than 2% error for defect-free specimens and 13% for defective ones. A reduction in mechanical properties and service life is observed in the material with defects compared to defect-free material, with a decrease of 16% of the ultimate strength and 40% of the fatigue limit. The study supports the application of thermography as a simple and rapid technique to detect and locate this type of defect and characterize the fatigue limit of the CFRP laminate., This research is part of the R+D+i project PID2023-151610OB-C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF: A way of making Europe". Grant PRE2018-086277 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046, and project GV/2021/060, is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Verification of strain energy splits of phase field fracture model using Westergaard&apos, s problem under mixed-mode loading

  • Infante-García, Diego|||0000-0001-6010-2031
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Álvarez-Blanco, Mario
[EN] One challenge in verifying strain energy splits in phase field fracture models is the lack of reference problems with exact solutions in mixed-mode loading that could serve as benchmark problems. In this work, different strain energy splits used in the variational phase field model have been applied to the classical Westergaard's problem. In contrast to other benchmark problems used in the literature, the proposed problem not only includes the singular term as a boundary condition but also implicitly considers all terms. To the authors' knowledge, this is the first time in the literature that this reference problem has been used to rigorously verify the accuracy of different energy splits of the phase field model. Several critical factors such as the pre- crack definition, mesh size, mixed mode ratio and the length scale parameter have been analysed. A good correlation between the numerical estimations and the analytical predictions was found for some pre-crack definition approaches under mode I. However, we demonstrated that the compatible regularisation length scale and mesh size are significantly lower under mode II loading (i.e., when the crack kinks) than under mode I., The authors gratefully acknowledge the funding support received from Generalitat Valenciana and European Social Fund CIAPOS/2021/271 and Vice-Rectorate for Research of Universitat Politecnica de Valencia with the project " Primeros Proyectos de Investigacion" (PAID-06-23) . The authors also thank the financial support of the Spanish Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" through grant number PID2020-118480RB-C21 and PID2023-151610OB-C22 the Generalitat Valenciana (Programme PROMETEO 2021/046) . Grant PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strength and toughness estimation of cement lines in cortical bone via finite fracture mechanics and numerical modeling

  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Infante-García, Diego|||0000-0001-6010-2031
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] The mechanical characterization of bone tissue presents significant challenges due to its hierarchical multi-scale structure. A precise modeling of bone fracture at the micro-scale requires the inclusion of bone micro constituents, their mechanical properties and interactions. Among micro constituents, cement lines play a significant role in fracture propagation, because they constitute the most likely crack growth path, while allowing the increase of fracture toughness due to crack arrest and deflection. To address this challenge, researchers often estimate the fracture toughness of cortical bone constituents at the micro-scale by combining experimental testing with numerical simulations. This work presents a first approach to the application of finite fracture mechanics to estimate the fracture toughness and strength of cement lines. An inverse problem analysis using an interface failure model, based on the coupled criterion and an optimization algorithm, is evaluated to estimate the material properties of cement lines in conjunction with experimental data. In addition, simulations considering a cohesive zone model using the estimated properties via finite fracture mechanics show strong agreement with the experimental results. Lastly, the phase field model and cohesive interfaces are successfully applied to assess crack propagation across the cortical bone microstructure. The results can be of interest to model cortical bone fracture and evaluate fracture risk at different length scales., The authors acknowledge the financial support received through the project PID2023-151610OB-C22 funded by MICIU/AEI/10.1 3039/501100011033 and FEDER, UE, the project PID2020-118920RB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF A way of making Europe , grant PRE2021-097626 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ , programme PROMETEO 2021/046 and CIGE/2023/110 funded by the Generalitat Valenciana, Spain. The funding of Vice-Rectorate for Research of Universitat Politècnica de València with the project Primeros Proyectos de Investigación (PAID-06-23) is also acknowledged. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of stress intensity factor oscillations in 3D cracks using domain integrals and the extended finite element method

  • González Albuixech, Vicente Francisco
  • Gravouil, Anthony
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Fracture-related failure of structural integrity can be evaluated using stress intensity factors (SIFs), and complex fractured geometries can be modeled using the extended finite element method (XFEM). Typically, domain integrals - especially J-integrals and interaction integrals - are used to compute SIFs. Although these integrals produce accurate estimates with the finite element method, they exhibit oscillations in the finite element support mesh when using XFEM due to their sensitivity to various topological relationships between the enrichment zone, domain definition and mesh. These oscillations can jeopardize accuracy, stability, and robustness of XFEM, influencing the convergence rate of SIFs. The domain integration solution has already undergone several changes to reduce these impacts, but no comparison or consideration of topological influence has been made. Here, we study some of the elements that lead to the unwanted behavior observed in various domain integration definitions, which incorporate corrections for curved and nonplanar cracks in examples with relatively coarse meshes. Consequently, various methodological limitations are discussed along with recommendations and suggestions., This research is part of the R+D+i project PID2023-151610OB-C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF: A way of making Europe". The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of cohesive zone models in CFRP delamination modeling

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Composite laminates such as carbon fiber reinforced polymers (CFRPs) are highly susceptible to delamination damage, which is considered one of the most important failure mechanisms in this type of material. In this work, a parametric study of one of the most used numerical methods to simulate this type of fracture is developed: the cohesive zone model (CZM) as implemented in the finite element (FE) code Abaqus. After reviewing the damage mechanics formulation of Mode I CZMs for static (monotonic) loading, the source of uncertainty arising from the calibration or selection of the input parameters is highlighted. Therefore, this study is intended to serve as a guide to facilitate the correct selection of these parameters, whether working with implicit or explicit formulations. To achieve this goal, double cantilever beam (DCB) experimental tests have been carried out on a thin CFRP laminate of four unidirectional plies oriented at 0 degrees. Based on experimental results, the critical energy release rate in Mode I was estimated and applied to 2D and 3D DCB models for implicit and explicit formulations. The experimental results have been used to validate both numerical models, showing maximum load errors of about 3 %, and perform an exhaustive evaluation of the sensitivity of different parameters, which serve as an input to the cohesive element implementation available in Abaqus, like interfacial stiffness, viscous regularization, or automatic stabilization among others. The study shows that some parameters, as the interfacial stiffness, admit relatively wide admissible ranges. Explicit analyses require adequate mesh refinement, recommending at least seven elements within the cohesive zone length to avoid oscillations, and viscous regularization or automatic stabilization should be limited to maintain dissipated energy below 2 % of total internal energy to ensure accuracy of the solution., This research is part of the R + D + i project PID2023-151610OB-C21 and C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".