Pasar al contenido principal

ENSAYO MECANICO DE LAMINADOS CON DEFECTOS Y SIMULACION NUMERICA

PRE2021-097626

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Verification of strain energy splits of phase field fracture model using Westergaard&apos, s problem under mixed-mode loading

  • Infante-García, Diego|||0000-0001-6010-2031
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Álvarez-Blanco, Mario
[EN] One challenge in verifying strain energy splits in phase field fracture models is the lack of reference problems with exact solutions in mixed-mode loading that could serve as benchmark problems. In this work, different strain energy splits used in the variational phase field model have been applied to the classical Westergaard's problem. In contrast to other benchmark problems used in the literature, the proposed problem not only includes the singular term as a boundary condition but also implicitly considers all terms. To the authors' knowledge, this is the first time in the literature that this reference problem has been used to rigorously verify the accuracy of different energy splits of the phase field model. Several critical factors such as the pre- crack definition, mesh size, mixed mode ratio and the length scale parameter have been analysed. A good correlation between the numerical estimations and the analytical predictions was found for some pre-crack definition approaches under mode I. However, we demonstrated that the compatible regularisation length scale and mesh size are significantly lower under mode II loading (i.e., when the crack kinks) than under mode I., The authors gratefully acknowledge the funding support received from Generalitat Valenciana and European Social Fund CIAPOS/2021/271 and Vice-Rectorate for Research of Universitat Politecnica de Valencia with the project " Primeros Proyectos de Investigacion" (PAID-06-23) . The authors also thank the financial support of the Spanish Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" through grant number PID2020-118480RB-C21 and PID2023-151610OB-C22 the Generalitat Valenciana (Programme PROMETEO 2021/046) . Grant PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of distributed out-of-plane waviness defects on the mechanical behavior of CFRP laminates

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Miguélez, María Henar
[EN] One of the most common defects induced during manufacturing of laminates is out-of-plane fibre waviness. This defect significantly affects the mechanical behavior of the laminate and reduces fatigue life and the load capacity of the material. Therefore, it is important to understand the impact of fibre waviness on the performance of composite laminates. In this work, multiple out-of-plane waves have been introduced throughout a Carbon Fibre Reinforced Polymer (CFRP) laminate at different thickness positions. The specimens were tested under tensile loading and an analysis of the surface of the laminate has been carried out by means of Digital Image Correlation (DIC). The results obtained by DIC were able to predict the apparent strain of the laminate quite accurately, as well as locate up to seven undulations at different depths. It was proved that a laminate with multiple wrinkles has 16% less tensile load strength. The results were used to validate different Finite Element (FE) models of the laminate showing a good agreement. These simple models were able to predict the initiation and propagation of failure in both the matrix and the fibre., This research is part of the R + D + i project PID2020-118480RB-C21 and C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant PDC2021-121368-C21 and C22 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Grant PRE2018-086277 and PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046 and project GV/2021/060, is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strength and toughness estimation of cement lines in cortical bone via finite fracture mechanics and numerical modeling

  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Infante-García, Diego|||0000-0001-6010-2031
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] The mechanical characterization of bone tissue presents significant challenges due to its hierarchical multi-scale structure. A precise modeling of bone fracture at the micro-scale requires the inclusion of bone micro constituents, their mechanical properties and interactions. Among micro constituents, cement lines play a significant role in fracture propagation, because they constitute the most likely crack growth path, while allowing the increase of fracture toughness due to crack arrest and deflection. To address this challenge, researchers often estimate the fracture toughness of cortical bone constituents at the micro-scale by combining experimental testing with numerical simulations. This work presents a first approach to the application of finite fracture mechanics to estimate the fracture toughness and strength of cement lines. An inverse problem analysis using an interface failure model, based on the coupled criterion and an optimization algorithm, is evaluated to estimate the material properties of cement lines in conjunction with experimental data. In addition, simulations considering a cohesive zone model using the estimated properties via finite fracture mechanics show strong agreement with the experimental results. Lastly, the phase field model and cohesive interfaces are successfully applied to assess crack propagation across the cortical bone microstructure. The results can be of interest to model cortical bone fracture and evaluate fracture risk at different length scales., The authors acknowledge the financial support received through the project PID2023-151610OB-C22 funded by MICIU/AEI/10.1 3039/501100011033 and FEDER, UE, the project PID2020-118920RB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF A way of making Europe , grant PRE2021-097626 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ , programme PROMETEO 2021/046 and CIGE/2023/110 funded by the Generalitat Valenciana, Spain. The funding of Vice-Rectorate for Research of Universitat Politècnica de València with the project Primeros Proyectos de Investigación (PAID-06-23) is also acknowledged. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of cohesive zone models in CFRP delamination modeling

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Composite laminates such as carbon fiber reinforced polymers (CFRPs) are highly susceptible to delamination damage, which is considered one of the most important failure mechanisms in this type of material. In this work, a parametric study of one of the most used numerical methods to simulate this type of fracture is developed: the cohesive zone model (CZM) as implemented in the finite element (FE) code Abaqus. After reviewing the damage mechanics formulation of Mode I CZMs for static (monotonic) loading, the source of uncertainty arising from the calibration or selection of the input parameters is highlighted. Therefore, this study is intended to serve as a guide to facilitate the correct selection of these parameters, whether working with implicit or explicit formulations. To achieve this goal, double cantilever beam (DCB) experimental tests have been carried out on a thin CFRP laminate of four unidirectional plies oriented at 0 degrees. Based on experimental results, the critical energy release rate in Mode I was estimated and applied to 2D and 3D DCB models for implicit and explicit formulations. The experimental results have been used to validate both numerical models, showing maximum load errors of about 3 %, and perform an exhaustive evaluation of the sensitivity of different parameters, which serve as an input to the cohesive element implementation available in Abaqus, like interfacial stiffness, viscous regularization, or automatic stabilization among others. The study shows that some parameters, as the interfacial stiffness, admit relatively wide admissible ranges. Explicit analyses require adequate mesh refinement, recommending at least seven elements within the cohesive zone length to avoid oscillations, and viscous regularization or automatic stabilization should be limited to maintain dissipated energy below 2 % of total internal energy to ensure accuracy of the solution., This research is part of the R + D + i project PID2023-151610OB-C21 and C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".