Pasar al contenido principal

EVALUACION DEL RIESGO DE FRACTURA OSEA CON PREVALENCIA DE OSTEOPOROSIS MEDIANTE UN ENFOQUE MULTIESCALA

PID2020-118920RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of the in-plane ultimate stress of lamellar tissue as a function of bone mineral density and osteocyte lacunae porosity

  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Vargas, Pablo
[EN] Detailed finite element models based on medical images (𝜇-CT) are commonly used to analyze the mechanical behavior of bone at microscale. In order to simulate the tissue failure onset, isotropic failure criteria of lamellar tissue are often used, despite its non-isotropic and heterogeneous nature. The main goal of the present work is to estimate the in-plane ultimate stress of lamellar bone, considering the influence of mineral content and the porosity due to the osteocyte lacunae concentration. To this aim, a representative volume cell of lamellar tissue is modeled numerically, including: (1) non-isotropic elastic properties of tissue as a function of the bone mineral density and (2) explicit modeling of the osteocyte lacunae, considering the range of porosity content, size and orientation of ellipsoid-shaped lacunae. Firstly, the element size for the finite element models have been defined from a preliminary convergence analysis. Bounds on the ultimate stress of non-porous lamellar tissue are estimated for two values of bone mineral density, considering the results of tensile and compressive tests of wet osteons from the literature. Subsequently, the ultimate stress of lamellar tissue considering several values of micro-porosity is addressed. Results: Results obtained in this work show that the strength of lamellar bone decreases exponentially with the increase of lacunae porosity concentration. Ultimate stress of non-porous tissue (𝑝 = 0%) increases with high mineral content, reaching a value of ̄ 𝑆 𝑐 𝑡𝑟𝑎𝑛𝑠 = 355.40 ± 39.80 MPa for compression in the transversal direction of the fiber bundles, being BMD = 1.246 g/cm3. The mean value for the longitudinal to transverse strength ratio evaluated for porosity 𝑝 = 0%, 1% and 5% and a mineral content BMD = 1.2 g/cm3, is 2.47:1 for tension and 1.55:1 for compression. These values are in agreement with literature. Conclusions: Osteocyte lacunae act as stress concentrators, acting as potential stimulus for the bone regeneration process. A novel micromechanical model for the in-plane ultimate stress of lamellar tissue as a function of mineral content and lacunae concentration is presented. Additional considerations about the intralamellar shear stress evolution are also given, The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2020-118480RB-C21 and C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , the Ministerio de Ciencia e Innovación y Universidades MCIN/AEI/ 10.13039/501100011033 and Europe Union NextGenerationEU/PRTR for the projects PDC2021-121368-C21 and C22, and the Generalitat Valenciana for Programa PROMETEO/2021/046
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of the interfaces and cross-links on the mechanical behavior of mineralized collagen fibrils. A numerical approach

  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • García-Aznar, J. Manuel
[EN] Mechanical properties of bone tissue are highly dependent on its hierarchical structure. The presence of microcracks and diffuse damage in lamellar bone is correlated with the failure of the collagen-mineral interface in mineralized collagen fibrils (MCF). The main goal of this work is to evaluate the mechanical behavior of the interfaces and quantify the stiffness loss of the MCF associated with different failure mechanisms, under controlled in-plane displacement. Additionally, we aim to study the role of the cross-links on the fibril mechanical response, beyond the interface failure. Inter- and intra-microfibrilar cross-links are analyzed. In order to address the first issue, a detailed representative volume of the MCF is analyzed by means of the finite element method, under the assumption of plane strain and periodic boundary conditions. In this model the interfaces between constituents are modeled with an exponential cohesive law. Enzymatic cross-links, located at the molecular terminals connecting each 4D (D = 67 nm) staggered molecules, are represented by non-linear springs. Three in-plane controlled deformations are applied. The results of this work provide the anisotropic stiffness loss of the tissue involved in the different failure mechanisms at the nano-scale length. The initiation of microcracks and the presence of damage zones are compatible with the failure mechanisms observed at interfaces. Interface failure entails a progressive stiffness loss, bringing a non-linear behavior of bone. The strength obtained for the longitudinal maximum deformation is more than 20 times the transverse strength and 3.5 times the shear strength. The quantification of the reduction percentage in the elastic moduli and the shear stiffness when the fibril is damaged, has a potential application in improving failure criteria based on degradation of elastic constants. When longitudinal elongation is applied, the mechanical contribution of the cross-links in delaying the failure initiation of the interface is shown. Likewise, results of this work confirm the scarce influence of the cross-links in the strain range analyzed. Additionally, a threedimensional numerical model of several microfibrils is defined with the aim of analyzing the mechanical relevance of inter- and intra-microfibrilar cross-links, beyond the interface failure. Results confirm that cross-links transfer the load when strain increases, being highlighted the mechanical competence of the trivalent cross-links., The authors acknowledge the Ministerio de Ciencia e Innovacion y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020-118920RB-I00, PID2020-118480RB-C21 and C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", the Ministerio de Ciencia e Innovacion y Universidades MCIN/AEI/10.13039/501100011033 and Europe Union Next Generation EU/PRTR for the projects PDC2021-121368-C21 and C22, CRUE-Universitat Politecnica de Valencia and the Generalitat Valenciana for Programa PROMETEO/2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influencia de la morfometría y las propiedades aparentes en la integridad estructural del hueso trabecular humano enfermo y sano

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[ES] En este trabajo, se han estudiado las relaciones entre la morfometría y la respuesta mecánica de hueso trabecular humano. Las muestras analizadas proceden de cabezas femorales humanas y están divididas en tres grupos: grupo sano (GS), grupo artrósico (GA) y grupo osteoporótico (GO). Las muestras se han escaneado mediante micro-CT para disponer de la geometría y poder realizar el estudio morfométrico de la microarquitectura trabecular. Se han llevado a cabo ensayos de compresión cuasiestática en la dirección más rígida de las muestras hasta producir su fractura. La influencia entre los parámetros se ha estudiado mediante correlaciones lineales por grupos de forma independiente, ya que el comportamiento aparente es tan diferente entre las muestras que las relaciones obtenidas analizando todas las muestras en conjunto no son relevantes y presentan unos coeficientes de correlación muy bajos. El grupo sano (GS) es el que presenta relaciones relevantes (con un p-valor < 0.05) con la densidad de conectividad Conn.D, el número de trabéculas Tb.N, el área superficial de hueso BS y la dimensión fractal D. Además, también se han relacionado los parámetros aparentes obtenidos de los ensayos experimentales entre sí. Para el caso de GS, presenta correlación entre la tensión de fallo final ¿¿ y el módulo de Young aparente ¿¿¿¿. Respecto al grupo osteoporótico, tanto ¿¿ como ¿¿¿¿ presentan correlaciones con la separación trabecular Tb.Sp y el número de trabéculas Tb.N. Además, también presentan correlación ¿¿¿¿ y la deformación asociada a la que se da la tensión de fallo final ¿¿. El grupo artrósico (GA) es el que menos correlaciones presenta, únicamente entre ¿¿ y el volumen total de las muestras TV y entre ¿¿ y ¿¿¿¿. Las correlaciones lineales obtenidas indican que se podría determinar el módulo de Young aparente o la tensión máxima que soportan las muestras sin realizar los ensayos experimentales mediante la evaluación de imágenes micro-CT., Los autores desean agradecer la financiación recibidadesde la GVA por el programa PROMETEO 2021/046, y por los proyectos PID2020-118920RB-I00 y PID2020-118480RB-C21 y C22, financiado por MCIN/AEI/10.13039/5011000110 33 y por FEDER Una manera de hacer Europa y el proyecto PDC2021- 121368-C21 y C22 financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring design strategies for patient-specific bone scaffolds to create a uniform mechanical environment in trabecular bone

  • Andrea Fresquet Monter
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Background and Objective: Large bone defects cannot be repaired by the inherent regeneration mechanisms of bone due to their size, which makes medical intervention essential. Current therapeutic treatments have their limitations, which has led to the study and development of bone scaffolds that maintain structural integrity during bone healing. Novel designs are required to create a mechanical environment that promote osseointegration. In this work, we aim to analyse the effect of patient-specific designs on the creation of a uniform mechanical environment in bone-scaffold constructs. Methods: Novel patient-specific Triply Periodic Minimal Surface (TPMS) structures were designed according to the characterisation of the microstructure of healthy and osteoporotic human cancellous bone to mimic morphometry. In addition, the assessment of the TPMS representative volume element size was also considered for scaffold design. The interaction between bone and scaffold was analysed through finite element model simulation. In those bone-scaffold assemblies we evaluated three different design strategies: (1) matching bone microstructure; (2) similar apparent compression elastic modulus; and (3) mimicking both the morphometry and the apparent modulus of trabecular bone. Results: The stress distribution in patient-specific TPMS scaffolds is 83.86 % similar to that of the targeted bone, significantly outperforming the 54.41 % similarity of non-patient-specific solutions. Conclusions: The design of novel patient-specific scaffolds based on a microstructure similar to cancellous bone allows a uniform stress distribution. Hence, matching both the bone morphometry and apparent elastic modulus is a key issue to reducing stress shielding phenomena and inducing osseointegration., The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2023-151610OB-C22 funded by MCIN/AEI /10.13039/501100011033, the Generalitat Valenciana PROMETEO/2021/046, CIGE/2023/110 and CIACIF/2023/454, and CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la fractura a compresión de hueso trabecular sano, osteoporótico y artrósico procedente de cabezas femorales humanas

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[ES] En este trabajo se ha estudiado el comportamiento mecánico del hueso trabecular mediante ensayos experimentales de compresión y el desarrollo de modelos numéricos de elementos finitos. Las muestras proceden de cabezas femorales humanas y se agruparon en tres cohortes: grupo sano (GS), grupo osteoporótico (GO) y grupo artrósico (GA). Los especímenes se ensayaron en la dirección estimada de máxima rigidez y se sometieron a cargas de compresión cuasiestática hasta la fractura. La respuesta experimental permitió calibrar los modelos numéricos, estimando el módulo de Young del tejido óseo y las propiedades de fallo de las muestras. Los resultados muestran que el hueso sano soporta un 52% más de carga que el hueso osteoporótico, y que la deformación correspondiente a la tensión máxima es un 33% mayor en el GS que en el GO. Las muestras artrósicas presentan un comportamiento intermedio, más próximo al grupo osteoporótico que al sano, lo que indica que las patologías analizadas se asocian a menores niveles de carga y deformación frente al hueso sano. La calibración de los modelos numéricos proporciona valores similares de deformación de inicio de fallo y de fallo completo para las muestras patológicas, mientras que en las muestras sanas estos valores difieren. En consecuencia, la simulación de la fractura en hueso osteoporótico requiere considerar propiedades de fallo específicas, coherentes con un comportamiento más frágil que el del hueso sano. Finalmente, este trabajo permite cuantificar dichos parámetros e identifica como principal origen de las diferencias las características morfométricas propias de la microestructura del hueso trabecular no sano., Los autores desean agradecer la financiación recibida desde la GVA por el Plan FDEGENT 2018 GVA y por el programa PROMETEO 2021/046, y por los proyectos PID2020-118920RB-I00 y PID2020-118480RB-C21 y C22, financiado por MCIN/AEI/10.13039/501100011033 y por FEDER Una manera de hacer Europa y el proyecto PDC2021-121368-C21 y C22 financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of the influence of triply periodic minimal surface structures morphometry on the mechanical response

  • Belda Ricardo|||0000-0003-3913-5773
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Marco, Miguel
[EN] Background and Objective: Design of bone scaffolds requires a combination of material and geometry to fulfil requirements of mechanical properties, porosity and pore size. Triply Periodic Minimal Surface (TPMS) structures have gained attention due to their similarities to cancellous bone. In this work, we aim at exploring relationships between morphometry and mechanical properties for TPMS configurations.Methods: Eight TPMS structures are defined considering six porosity levels and their morphometry is characterized. The stiffness matrix of each structure is assessed and related to morphometry through a statistical analysis.Results: An orthotropic mechanical behavior has been derived from the numerical homogenization. Prop-erties decay exponentially for decreasing volume fraction. Through volume fraction variation, TPMS me-chanical properties can be selected to match bone properties in a range of 0.2% to 70% of the bulk mate-rial properties.Conclusions: The comparison between cancellous bone and TPMS morphometry, considering a unit cell size of 1.5 mm, reveals that the configurations analyzed in this work match the requirements of volume fraction, mean thickness and pore size. However, the TPMS studied in this work differ from cancellous bone anisotropy. The results in this paper provide a framework to select the proper TPMS configuration and its geometry for patient-specific applications., This work was supported by the Spanish Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033 through grant numbers PID2020-118480RB-C21, PID2020-118920RB-I0 0 and PID2020-112628RA-I0 0, the European Union NextGenerationEU/PRTR through grant number PDC2021-121368-C22 and the Generalitat Valenciana (Programme PROMETEO 2021/046 and Plan FDGENT 2018 GVA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical modelling of cancellous bone damage using an orthotropic failure criterion and tissue elastic properties as a function of the mineral content and microporosity.

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • PERIS SERRA, JOSE LUIS
  • Larrainzar-Garijo, Ricardo
[EN] Background and objective : Elastic and strength properties of lamellar tissue are essential to analyze the mechanical behaviour of bone at the meso- or macro-scale. Although many effort s have been made to model the architecture of cancellous bone, in general, isotropic elastic constants are assumed for tissue modelling, neglecting its non-isotropic behaviour. Therefore, isotropic damage laws are often used to esti- mate the bone failure. The main goals of this work are: (1) to present a new model for the estimation of the elastic properties of lamellar tissue which includes the bone mineral density (BMD) and the micro- porosity, (2) to address the numerical modelling of cancellous bone damage using an orthotropic failure criterion and a discrete damage mechanics analysis, including the novel approach for the tissue elastic properties aforementioned. Methods : Numerical homogenization has been used to estimate the elastic properties of lamellar bone considering BMD and microporosity. Microcomputed Tomography ( ¿-CT) scans have been performed to obtain the micro-finite element ( ¿-FE) model of cancellous bone from a vertebra of swine. In this model, lamellar tissue is orientated by considering a unidirectional layer pattern being the mineralized colla- gen fibrils aligned with the most representative geometrical feature of the trabeculae network. We have considered the Hashin¿s failure criterion and the Material Property Degradation (MPDG) method for sim- ulating the onset and evolution of bone damage. Results: The terms of the stiffness matrix for lamellar tissue are derived as functions of the BMD and mi- croporosity at tissue scale. Results obtained for the apparent yield strain values agree with experimental values found in the literature. The influence of the damage parameters on the bone mechanics behaviour is also presented. Conclusions : Stiffness matrix of lamellar tissue depends on both BMD and microporosity. The new ap- proach presented in this work enables to analyze the influence of the BMD and porosity on the mechan- ical response of bone. Lamellar tissue orientation has to be considered in the mechanical analysis of the cancellous bone. An orthotropic failure criterion can be used to analyze the bone failure onset instead of isotropic criteria. The elastic property degradation method is an efficient procedure to analyze the failure propagation in a 3D numerical model., The authors acknowledge the Ministerio de Ciencia e Innovacion and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020-118920RB-I00 and PID2020-118480RB-C21, the Generalitat Valenciana for Plan FDGENT 2018 and Programme PROMETEO 2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strength and toughness estimation of cement lines in cortical bone via finite fracture mechanics and numerical modeling

  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Infante-García, Diego|||0000-0001-6010-2031
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] The mechanical characterization of bone tissue presents significant challenges due to its hierarchical multi-scale structure. A precise modeling of bone fracture at the micro-scale requires the inclusion of bone micro constituents, their mechanical properties and interactions. Among micro constituents, cement lines play a significant role in fracture propagation, because they constitute the most likely crack growth path, while allowing the increase of fracture toughness due to crack arrest and deflection. To address this challenge, researchers often estimate the fracture toughness of cortical bone constituents at the micro-scale by combining experimental testing with numerical simulations. This work presents a first approach to the application of finite fracture mechanics to estimate the fracture toughness and strength of cement lines. An inverse problem analysis using an interface failure model, based on the coupled criterion and an optimization algorithm, is evaluated to estimate the material properties of cement lines in conjunction with experimental data. In addition, simulations considering a cohesive zone model using the estimated properties via finite fracture mechanics show strong agreement with the experimental results. Lastly, the phase field model and cohesive interfaces are successfully applied to assess crack propagation across the cortical bone microstructure. The results can be of interest to model cortical bone fracture and evaluate fracture risk at different length scales., The authors acknowledge the financial support received through the project PID2023-151610OB-C22 funded by MICIU/AEI/10.1 3039/501100011033 and FEDER, UE, the project PID2020-118920RB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF A way of making Europe , grant PRE2021-097626 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ , programme PROMETEO 2021/046 and CIGE/2023/110 funded by the Generalitat Valenciana, Spain. The funding of Vice-Rectorate for Research of Universitat Politècnica de València with the project Primeros Proyectos de Investigación (PAID-06-23) is also acknowledged. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Analysis of osteoporosis effect on the mechanical behaviour and morphometry of human cancellous bone

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
[ES] En esta tesis, el principal objetivo es analizar el efecto de la osteoporosis en el comportamiento mecánico del hueso trabecular. El comportamiento del hueso trabecular se ha abordado desde diferentes enfoques: ensayos experimentales, modelos de elementos finitos (EF) e imagen médica obtenida por micro-CT. El impacto de la osteoporosis se ha estudiado en distintas escalas. Se ha abordado un estudio a nivel de tejido lamelar del hueso trabecular para estimar las ecuaciones que nos permitan definir las propiedades elásticas y resistentes en función de la densidad mineral ósea y la porosidad del tejido. Estas ecuaciones inferidas en los modelos de EF permitirán estudiar el comportamiento del tejido óseo lamelar abarcando un amplio rango de porosidades y DMOs. Se ha realizado un estudio de la estructura trabecular y del tejido lamelar utilizando un estereomicroscopio y el FESEM. Al nivel del tejido lamelar, se ha podido observar la disposición de las lamelas en distintas localizaciones, como en las trabéculas y sus intersecciones. Además, se ha podido evaluar la porosidad tisular natural y la producida por enfermedades óseas. Esta información se ha introducido en los modelos EF para definir las propiedades en las muestras. Las ecuaciones elásticas y resistentes estimadas consideran un comportamiento ortótropo y es posible cuantificar cómo afectan la DMO y la porosidad a estas propiedades. Se ha estudiado el comportamiento mecánico a compresión de muestras humanas de hueso trabecular procedente de cabezas femorales. Estas muestras se clasifican en tres grupos: sano, artrósico y osteoporótico. Estas muestras se han estudiado mediante ensayos experimentales, imagen médica y modelos de EF, permitiendo obtener gran información sobre el comportamiento mecánico del hueso. La respuesta mecánica está muy influenciada por la microarquitectura trabecular. Los resultados obtenidos más relevantes son el módulo aparente, la tensión de fallo y la deformación de fallo. Se han podido generar modelos de EF y estudiar la morfometría de las muestras. Los modelos de EF han permitido estimar las propiedades a nivel de tejido: módulo de Young a nivel de tejido y las deformaciones de fluencia y fallo. Los resultados muestran que a nivel de tejido no se aprecian variaciones en el módulo de Young aunque el hueso presente una patología ósea. Un comportamiento de fluencia similar se ha observado para todos los grupos, con diferencias únicamente en la deformación de fallo. El estudio morfométrico permite analizar los parámetros morfométricos que diferencian las muestras sanas de las enfermas. Se han correlacionado dichos parámetros con la respuesta mecánica para analizar los que tienen mayor influencia sobre ella. Las correlaciones permiten estimar la respuesta mecánica del hueso utilizando imagen médica sin realizar ensayos experimentales. Los parámetros obtenidos de la respuesta mecánica también se han relacionado entre sí, permitiendo conocer el comportamiento de cada una de las muestras que es diferente según la enfermedad que padecen. También, se han estudiado muestras bioinspiradas y estructuras TPMS obtenidas mediante fabricación aditiva. Estas muestras se han fabricado con PLA como material de impresión. Las muestras muestran un comportamiento ortótropo como las muestras trabeculares. Los simulantes pueden ser utilizados para hacer estudios previos cuando no se disponga de las muestras óseas. El tratamiento de fracturas óseas de gran tamaño requiere de técnicas no convencionales para la fijación del hueso. Suelen utilizarse andamios óseos con triple periodicidad que tienen como resultado propiedades ortótropas iguales en las tres direcciones ortogonales. Estos sistemas deben disponer de rigideces similares al hueso alrededor del defecto para evitar el aflojamiento del implante. Por ello, se propone una metodología que permite diseñar andamios óseos paciente-específicos que permiten ajustar las propiedades mecánicas ortótropas en función del hueso., [CA] En esta tesi, el principal objectiu és analitzar l'efecte de l'osteoporosi en el comportament mecànic de l'os trabecular. El comportament de l'os trabecular s'ha abordat des de diferents plantejaments, com són els assajos experimentals, els models d'elements finits (EF) i la imatge mèdica obtinguda per micro-CT. L'impacte de l'osteoporosi s'ha estudiat en diferents escales. En primer lloc, s'ha abordat un estudi a nivell de teixit lamellar de l'os trabecular per a estimar les equacions que ens permeten definir les propietats elàstiques i resistents en funció de la densitat mineral òssia i la porositat del teixit. Estes equacions inferides en els models d'EF permetran estudiar el comportament del teixit ossi lamel·lar abastant un ampli rang de porositats i DMOs. S'ha realitzat un estudi de l'estructura trabecular i del teixit lamel·lar utilitzant un estereomicroscopi i el FESEM. Al nivell del teixit lamel·lar, s'ha pogut observar la disposició de les lamel·les en diferents localitzacions, com en les trabècules i les seues interseccions. A més, s'ha pogut avaluar la porositat tissular natural i la produïda per malalties òssies. Tota esta informació ha sigut incorporada als models numèrics per a poder definir les propietats en les mostres trabeculars. Les equacions elàstiques i resistents estimades consideren un comportament ortòtrop i és possible quantificar com afecten la DMO i la porositat a estes propietats. S'ha estudiat el comportament mecànic a compressió de mostres humanes d'os trabecular procedent de caps femorals i s'han classificat en tres grups: sa, artròsic i osteoporòtic. S'han estudiat mitjançant assajos experimentals, imatge médica i models d'EF, obtenint gran informació sobre el comportament mecànic de l'os. La resposta mecànica està fortament influenciada per la microarquitectura trabecular. Els resultats obtinguts més importants són el mòdul aparent, la tensió de fallada i la deformació de fallada. S'han generat models d'EF i estudiat la morfometria. Els models d'EF han permés estimar les propietats a nivell de teixit: el mòdul de Young a nivell de teixit i les deformacions de fluència i fallada. A nivell de teixit no s'aprecien variacions en el mòdul de Young encara que l'os present una patologia òssia. Un comportament de fluència similar s'ha observat per a tots els grups, amb diferències únicament en la deformació de fallada. L'estudi de la morfometria ha permés analitzar els paràmetres morfomètrics que diferencien les mostres sanes de les malaltes, i fins i tot a diferenciar entre diferents patologies. S'han correlacionat estos paràmetres amb la resposta mecànica per a analitzar aquells que tenen major influència sobre ella. Les correlacions obtingudes permeten estimar la resposta mecànica de l'os trabecular utilitzant les imatges micro-CT sense necessitat de realitzar assajos experimentals. Els paràmetres obtinguts de la resposta mecànica també s'han relacionat entre si. Estes relacions permeten conéixer el comportament de cadascuna de les mostres que és diferent segons la malaltia que patixen. També, s'han estudiat mostres bioinspirades i estructures TPMS obtingudes mitjançant fabricació additiva. Estes mostres bioinspirades s'han fabricat amb PLA com a material d'impressió. Les mostres mostren un comportament ortòtrop com les trabeculars. Estos simulants poden ser utilitzats per a fer estudis previs quan no es dispose de les mostres òssies. El tractament de fractures òssies de gran grandària requerix de tècniques no convencionals per a la fixació de l'os. Solen utilitzar-se bastides òssies amb triple periodicitat que tenen com a resultat propietats ortòtropes iguals en les tres direccions ortogonals. Estos sistemes han de disposar de rigideses similars a l'os en el veïnatge del defecte per a evitar l'afluixament de l'implant. S'ha proposat una metodologia que permet dissenyar bastides òssies pacient-específics que permeten ajustar les propietats mecàniques ortòtropes en cada direcció en funció de l'os., [EN] The main objective of this thesis is to analyse the effect of osteoporosis on the mechanical behaviour of cancellous bone. The behaviour of cancellous bone has been addressed through different approaches: experimental tests, finite element (FE) models and medical imaging obtained by micro-CT. The impact of osteoporosis has been studied on different scales. Firstly, a study has been undertaken at the lamellar tissue level of trabecular bone to estimate the equations that define the elastic and strength properties as a function of bone mineral density and tissue porosity. These equations are inferred from FE models and allow us to characterise the behaviour of lamellar bone tissue covering a wide range of porosities and BMDs. A study of the cancellous structure and lamellar tissue has been carried out using a stereomicroscope and FESEM. At lamellar tissue level, it was possible to observe the arrangement of lamellae in different locations, such as trabeculae and at their intersections. In addition, it has been possible to evaluate the natural tissue porosity and that produced by bone diseases. All this information has been incorporated to the numerical models in order to define the properties of cancellous bone samples. The estimated elastic and strength equations consider an orthotropic behaviour and it is possible to quantify how BMD and porosity affect these properties. On the other hand, the mechanical behaviour under compression of human trabecular bone samples from femoral heads has been studied. These samples are classified into three study groups: healthy, osteoarthrosic and osteoporotic. The samples have been studied using experimental tests, medical imaging obtained and FE models, enabling to obtain a great deal of information regarding the mechanical behaviour of the bone. The trabecular microarchitecture strongly influences the mechanical response. The most important results obtained are the apparent modulus, the failure stress and the failure strain. It was possible to generate FE models and study the morphometry of the specimens. The FE models have made it possible to estimate the properties at the tissue level. The results revealed that at the tissue level, Young's modulus does not vary appreciably, even if the bone shows bone pathology. A similar yield behaviour is observed for all groups, with differences only in the final failure strain. The morphometry study has enabled to analyse the morphometric parameters that differentiate between healthy and diseased specimens and even to differentiate between different pathologies. The morphometric parameters have been correlated with the mechanical response to analyse those that have the most significant influence on the mechanical response. The correlations obtained make it possible to estimate the mechanical response of trabecular bone using micro-CT images without the need for experimental tests. The parameters obtained from the mechanical response have also been related. These relationships permit to know the behaviour of each of the samples, which is different depending on the disease they suffer. Finally, bioinspired samples and minimal surface area triple periodic structures obtained by additive manufacturing have been studied. These samples are made of PLA as the printing material. The samples show a similar orthotropic behaviour to the trabecular samples. These simulants can be used for pre-studies when bone samples are not available. The treatment of large bone fractures requires unconventional techniques for bone fixation. Bone scaffolds with triple periodicity that result in equal orthotropic properties in all three orthogonal directions are often used. These systems must have bone-like stiffness in the vicinity of the defect to avoid implant loosening. To this end, a methodology has been proposed to design patient-specific bone scaffolds that allow the orthotropic mechanical properties in each direction to be calibrated according to a specific bone., The author and the supervisors of this PhD thesis acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020-118920RB-I00 and PID2020-118480RB-C21 and C22 funded by MCIN/AEI/10.13039/501100011033, and the Generalitat Valenciana for Plan FDEGENT 2018 and Programa PROMETEO/2021/046.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of the interfaces and cross-links on the mechanical behavior of mineralized collagen fibrils. A numerical approach

  • Vercher-Martínez, Ana
  • Giner, Eugenio
  • Fuenmayor, F. Javier
  • García-Aznar, J. Manuel
Mechanical properties of bone tissue are highly dependent on its hierarchical structure. The presence of microcracks and diffuse damage in lamellar bone is correlated with the failure of the collagen-mineral interface in mineralized collagen fibrils (MCF). The main goal of this work is to evaluate the mechanical behavior of the interfaces and quantify the stiffness loss of the MCF associated with different failure mechanisms, under controlled in-plane displacement. Additionally, we aim to study the role of the cross-links on the fibril mechanical response, beyond the interface failure. Inter- and intra-microfibrilar cross-links are analyzed. In order to address the first issue, a detailed representative volume of the MCF is analyzed by means of the finite element method, under the assumption of plane strain and periodic boundary conditions. In this model the interfaces between constituents are modeled with an exponential cohesive law. Enzymatic cross-links, located at the molecular terminals connecting each 4D ( ) staggered molecules, are represented by non-linear springs. Three in-plane controlled deformations are applied. The results of this work provide the anisotropic stiffness loss of the tissue involved in the different failure mechanisms at the nano-scale length. The initiation of microcracks and the presence of damage zones are compatible with the failure mechanisms observed at interfaces. Interface failure entails a progressive stiffness loss, bringing a non-linear behavior of bone. The strength obtained for the longitudinal maximum deformation is more than 20 times the transverse strength and 3.5 times the shear strength. The quantification of the reduction percentage in the elastic moduli and the shear stiffness when the fibril is damaged, has a potential application in improving failure criteria based on degradation of elastic constants. When longitudinal elongation is applied, the mechanical contribution of the cross-links in delaying the failure initiation of the interface is shown. Likewise, results of this work confirm the scarce influence of the cross-links in the strain range analyzed. Additionally, a three-dimensional numerical model of several microfibrils is defined with the aim of analyzing the mechanical relevance of inter- and intra-microfibrilar cross-links, beyond the interface failure. Results confirm that cross-links transfer the load when strain increases, being highlighted the mechanical competence of the trivalent cross-links.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Numerical modelling of cancellous bone damage using an orthotropic failure criterion and tissue elastic properties as a function of the mineral content and microporosity

  • Larrainzar Garijo, Ricardo
  • Megías , Raquel
  • Vercher-Martínez, Ana
  • Belda, Ricardo
  • Peris, José Luis
  • Giner, Eugenio
  • Fuenmayor, Javier
Background and objective: Elastic and strength properties of lamellar tissue are essential to analyze the mechanical behaviour of bone at the meso- or macro-scale. Although many efforts have been made to model the architecture of cancellous bone, in general, isotropic elastic constants are assumed for tissue modelling, neglecting its non-isotropic behaviour. Therefore, isotropic damage laws are often used to estimate the bone failure. The main goals of this work are: (1) to present a new model for the estimation of the elastic properties of lamellar tissue which includes the bone mineral density (BMD) and the microporosity, (2) to address the numerical modelling of cancellous bone damage using an orthotropic failure criterion and a discrete damage mechanics analysis, including the novel approach for the tissue elastic properties aforementioned. Methods: Numerical homogenization has been used to estimate the elastic properties of lamellar bone considering BMD and microporosity. Microcomputed Tomography (μ-CT) scans have been performed to obtain the micro-finite element (μ-FE) model of cancellous bone from a vertebra of swine. In this model, lamellar tissue is orientated by considering a unidirectional layer pattern being the mineralized collagen fibrils aligned with the most representative geometrical feature of the trabeculae network. We have considered the Hashin's failure criterion and the Material Property Degradation (MPDG) method for simulating the onset and evolution of bone damage. Results: The terms of the stiffness matrix for lamellar tissue are derived as functions of the BMD and microporosity at tissue scale. Results obtained for the apparent yield strain values agree with experimental values found in the literature. The influence of the damage parameters on the bone mechanics behaviour is also presented. Conclusions: Stiffness matrix of lamellar tissue depends on both BMD and microporosity. The new approach presented in this work enables to analyze the influence of the BMD and porosity on the mechanical response of bone. Lamellar tissue orientation has to be considered in the mechanical analysis of the cancellous bone. An orthotropic failure criterion can be used to analyze the bone failure onset instead of isotropic criteria. The elastic property degradation method is an efficient procedure to analyze the failure propagation in a 3D numerical model.