Pasar al contenido principal

METODOLOGIAS AVANZADAS EN PROCESOS DE TALADRADO EN COMPONENTES AERONAUTICOS

PID2023-151610OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid fatigue life estimation of drilled CFRP laminates and titanium stacks using thermography

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Miguélez, María Henar
[EN] In this work, we estimate the fatigue life of drilled Carbon Fiber Reinforced Polymer (CFRP) laminates making use of the temperature evolution of the component. As the self-heating effect due to cyclic loading causes a temperature change in the initial stages of the loading, the slope of the temperature variation ¿T versus the number of cycles can be used to estimate the remaining life. We have validated the applicability of the procedure for drilled laminates under different cutting conditions, and for drilled Ti-CFRP stacks. Infrared thermography was used to obtain the temperature variation during cycling loading. The results proved that the obtained adjusted model can effectively estimate the fatigue life of CFRP laminates with delamination damage or thermal damage with an error of 15%, proving the usefulness of this methodology for drilled and stacked laminates., This research is part of the R + D + i project PID2020-118480RBC21,-C22, and PID2023-151610OB-C21,-C22, funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe . Grant PRE2018-086277 funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future . The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046 and project GV/2021/060 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of drilling operations on the fatigue performance of CFRP and CFRP/Ti hybrid structures using a thermographic approach

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Miguélez, María Henar
[EN] This study investigates the use of infrared thermography as a non-destructive technique to predict the fatigue life of carbon fiber-reinforced polymer (CFRP) laminates, with and without titanium (Ti) stacking, assessing the impact of drilling-induced damage. Drilling, essential for creating mechanical joints, introduces defects that significantly reduce the fatigue life of CFRP. Several models based on data obtained from infrared thermography were applied. These models rely on different parameters from the temperature curve during the test, such as the initial and final slope, the stable temperature in the second phase, or the total dissipated energy. Using these data, it is possible to estimate the remaining fatigue life or the fatigue limit of the material. The results show that models based on the initial slope of the temperature curve provide accurate estimates with errors close to 10%, while models using the stabilized temperature exhibit errors around 19%. Although final-phase models were less accurate, methods based on total dissipated energy effectively predict fatigue limits. Overall, the study demonstrated an average accuracy of 15% in fatigue life prediction under various damage conditions, validating infrared thermography as an effective tool for structural integrity assessment in industrial applications., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is part of the R+D+i projects PID2023-151610OB-C21 and PID2023-151610OB-C22, funded by MCIN/AEI/10.13039/501100011033 and by ERDF: A way of making Europe. Grant PRE2018-086277 funded by MCIN/ AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of cohesive zone models in CFRP delamination modeling

  • Calvo, Jose Vicente|||0000-0001-8488-1762
  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Composite laminates such as carbon fiber reinforced polymers (CFRPs) are highly susceptible to delamination damage, which is considered one of the most important failure mechanisms in this type of material. In this work, a parametric study of one of the most used numerical methods to simulate this type of fracture is developed: the cohesive zone model (CZM) as implemented in the finite element (FE) code Abaqus. After reviewing the damage mechanics formulation of Mode I CZMs for static (monotonic) loading, the source of uncertainty arising from the calibration or selection of the input parameters is highlighted. Therefore, this study is intended to serve as a guide to facilitate the correct selection of these parameters, whether working with implicit or explicit formulations. To achieve this goal, double cantilever beam (DCB) experimental tests have been carried out on a thin CFRP laminate of four unidirectional plies oriented at 0 degrees. Based on experimental results, the critical energy release rate in Mode I was estimated and applied to 2D and 3D DCB models for implicit and explicit formulations. The experimental results have been used to validate both numerical models, showing maximum load errors of about 3 %, and perform an exhaustive evaluation of the sensitivity of different parameters, which serve as an input to the cohesive element implementation available in Abaqus, like interfacial stiffness, viscous regularization, or automatic stabilization among others. The study shows that some parameters, as the interfacial stiffness, admit relatively wide admissible ranges. Explicit analyses require adequate mesh refinement, recommending at least seven elements within the cohesive zone length to avoid oscillations, and viscous regularization or automatic stabilization should be limited to maintain dissipated energy below 2 % of total internal energy to ensure accuracy of the solution., This research is part of the R + D + i project PID2023-151610OB-C21 and C22, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant PRE2021-097626 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".