Pasar al contenido principal

MICRO Y NANOPROCESADO AVANZADO DE MATERIALES POLIMEROS: INTERRELACIONES ENTRE LA ESTRUCTURA, LAS PROPIEDADES Y LAS APLICACIONES

PID2022-138635NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical approach to the crystal structure of poly(butylene 2,5-furandicarboxylate) as revealed by density functional theory

  • Toledano, Óscar
  • Gálvez, Óscar
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
12 pages, 13 figures, 1 table, In this work, we present a new model of the crystalline structure of the poly(butylene 2,5-furandicarboxylate) (PBF). This new structure has been derived using an ab initio density functional theory methodology and focusing on the agreement between the experimental and theoretical x-ray diffraction patterns. An extensive study has been performed to analyze the possible conformations that the polymeric strand can adopt in its crystalline form, leading to 60 initial crystalline structures. Due to thermal motion, which cannot be easily tackled with the ab initio methodology, and small inaccuracies, which are intrinsic to this calculation method, the theoretical unit cell dimensions can slightly differ from those obtained in the crystallization experiments. Thus, a structural refinement method has been employed to overcome these discrepancies and procure a crystalline structure whose x-ray diffraction pattern is consistent with the experimental one. For the proposed crystalline structure of PBF, both the powder diffraction pattern and the fiber diffraction diagram show a remarkable agreement with those available in the literature., We acknowledge the computational resources and assistance provided by the Centro de Computación de Alto Rendimiento CCAR-UNED and Drago HPC facilities from CSIC. O.T. acknowledges the financial support provided by the Ministerio de Universidades through the European Union-NextGenerationUE funds through a Margarita Salas fellowship. We also acknowledge the financial support provided by the following Grant Nos.: PID2022-138635NB-I00/AEI/10.13039/501100011033, TED 2021-129845B–I00, and TED2021-131914B–I00, funded by MCIN/ AEI/10.13039/501100011033 and by “ERDF A way of making Europe.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning photophysical properties of semiconducting polymer nanoparticles for improved photocatalytic activity

  • Sena-Fernández, Jose
  • Rebollar, Esther
  • Hurtado-Mendoza, Aitana
  • Murdoch, Timothy J
  • Vega, Juan Francisco
  • Martín-Fabiani, Ignacio
  • Ezquerra, Tiberio A
  • Nogales, Aurora
9 pages, 5 figures, This study investigates the relation between the optical and structural properties of poly(3-hexylthiophene) nanoparticles with their efficiency as photocatalysts for the degradation of water pollutants. Two nanoparticle preparation methods were investigated. Our results indicate that nanoparticles prepared by the miniemulsion method are more efficient in inducing photodegradation. The higher crystallinity, observed by X-ray scattering experiments and the presence of surfactant in these nanoparticles affect the photophysical properties. The fluorescence lifetime of miniemulsion nanoparticles is shorter than that of nanoparticles prepared by the flash method, favoring charge transfer towards the surface of the nanoparticle. These charges, in the presence of water, produce highly reactive oxygen species, responsible for the pollutant photodegradation., TThis work was supported by grants PID2019-107514GB-I00, PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033, by grants TED2021-131914B-I00 and TED2021-129845B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. JS acknowledge the funding by MCIN/AEI/10.13039/501100011033 through grant number PRE2020-094362 and by the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). The support from the Scientific Network on Photocatalysis OASIS funded by the Consejo Superior de Investigaciones Científicas (CSIC), Spain is also acknowledged. AHM acknowledges funding by the JAE program, CSIC. The authors acknowledge M. Malfois for support in the experiments performed in NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Vallès, Barcelona, Spain) with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical micro-nanostructuring of polymer films by simultaneous laser interference and diffraction

  • Hernández, Jaime J.
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Gálvez, Óscar
  • Sanz, Mikel
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Rebollar, Esther
8 pages, 7 figures, 1 table, This study presents a laser-based method for creating hierarchical micro/nanostructures on polymer surfaces. By combining laser-induced periodic surface structures (LIPSS) with microscale diffraction patterns, using a 266 nm Nd:YAG laser and a mask, poly(bisphenol A carbonate) (PBAC) films were patterned. The interference between the incident laser beam and the light scattered on the surface leads to the formation of LIPSS aligned with laser polarization while, simultaneously, the use of masks with grids of 90 µm square holes induces Fresnel diffraction. The combination of both effects results in the formation of hierarchical structures that incorporate features at both nano- and microscale respectively. Atomic force microscopy revealed LIPSS formation at the square corners and at the center, with periodicities close to the laser wavelength. At low fluences or pulse numbers, only the diffraction pattern of the mask is observed. LIPSS increased hydrophilicity while the combination of diffraction and LIPSS increased the hydrophobicity. Adhesion force measurements, performed using the colloidal probe technique, indicated a significant increase near the structured edges of the irradiated areas, although at the nanoscale the differences are minimal. This study highlights the effective integration of micro and nanopatterns on polymeric surfaces using diffraction masks. Furthermore, it provides valuable information on how laser processing affects the morphology and properties of the surface, including wettability, adhesion, and mechanical properties. The ability to simultaneously modify the micro and nanoscale opens new avenues for the creation of functional polymeric surfaces with applications in various fields such as nanophotonics, biomedicine, and nanoelectronics., This work has been funded by grants PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033, TED2021-131914B-I00 and TED2021-129845B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe, and by the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). Thanks are given to Dr. Daniel Martínez-Tong for fruitful discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructuring aromatic polyimide surfaces by laser

  • Martínez-García, Patricia
  • Gálvez, Óscar
  • Sanz, Mikel
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
10 pages, 9 figures, 4 tables . -- This article is part of a special issue entitled: FERROL2025 published in Polymer, This study investigates the formation of Laser-Induced Periodic Surface Structures (LIPSS) on Kapton using UV nanosecond laser irradiation, focusing on optimizing irradiation parameters and analyzing their effects on surface properties. Optimal conditions were identified through systematic variation of laser fluence and pulse number. Spectroscopic analysis showed that laser nanostructuring occurs alongside chemical modifications, primarily confined to the material surface. Despite high irradiation temperatures, rapid cooling prevents carbonization, but oxidation takes place. This oxidation occurred in the outermost polymer film, explaining changes in water contact angle and surface energy, particularly an increase in the electron acceptor component. These results advance our understanding of LIPSS formation on Kapton and its impact on surface characteristics. The precise control over LIPSS morphology and the achievement of stable surface modifications create new opportunities for customized applications., This work has been funded by grants PID2022-138635NB-I00 and PID2021-126524NB-100 funded by MICIN/AEI/10.13039/ 501100011033, TED2021-129845B–I00, and TED2021-131914B–I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and TEC MATRIX-CM (TEC-2024/TEC-85) funded by the Regional Government of Madrid. We acknowledge the computational resources and assistance provided by the Centro de Computacion de Alto Rendimiento CCAR-UNED., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Nature of Fluorescence Modification Induced by Deformation in Regenerated Silk Fibroin

  • Santoro, Gonzalo
  • Toledano, Óscar
  • Horcajo Peribáñez, Iván
  • Rebollar, Esther
  • Ezquerra, Tiberio A.
  • Sena-Fernández, Jose
  • Solano, Eduardo
  • García-Gutiérrez, Mari Cruz
9 pages, 10 figures, 2 tables, The mechanical deformation of regenerated silk fibroin (RSF) films induces notable changes in their fluorescence properties, yet the underlying molecular mechanisms remain poorly understood. In this work, we investigate the interplay between mechanical, structural, and optical response of RSF films processed with glycerol (gly) and with polyethylene glycol (PEG) as a plasticizer. PEG-containing films exhibited enhanced ductility, a significant increase of the absorption coefficient in the UV spectral range and narrower fluorescence spectra, with reduced intensity at longer wavelengths, suggesting fewer cross-links. These differences in the mechanical and optical properties of the investigated polymers may be due to the higher amorphous phase content of the samples with PEG, as it is revealed by wide-angle X-ray scattering (WAXS). Ab initio calculations of model systems confirmed that fluorescence, primarily due to tryptophan residues, is highly sensitive to local conformation and hydrogen-bonding interactions. To elucidate the effect of deformation on silk fibroin fluorescence, WAXS patterns, using synchrotron radiation, and fluorescence spectra were acquired while simultaneous tensile measurements were performed. Notably, strain-induced backbone alignment favors the formation of electronically coupled cross-links, which give rise to the observed changes in fluorescence. These findings provide further insights into the structure-property relationships governing RSF fluorescence, with potential implications for the design of deformation-responsive biomaterials., This work has been funded by grants: TED2021-129845B−I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by PID2022-138635NBI00/AEI/10.13039/501100011033, and by the Regional Government of Madrid through the project TEC MATRIXCM (TEC-2024/TEC-85). Authors acknowledge Dr. I. Tanarro and Dr. R. Peláez for support with the fluorescence spectrometer used for the in situ measurements. 2D WAXS experiments were performed at ALBA synchrotron (proposal 2024028365) with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of polar phases in poly(vinylidene fluoride-co-hexafluoropropylene)/expanded graphite composites during 3-D printing as revealed by “operando” small and wide angle X-ray scattering

  • Ezquerra, Tiberio A.
  • Gálvez, Óscar
  • García-Gutiérrez, Mari Cruz
  • Malfois, Marc
  • Nogales, Aurora
  • Rebollar, Esther
  • Šics, Igors
8 pages, 10 figures, Here we present a research work about the crystallization of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and of one PVDF-HFP composite with expanded graphite (EG) as nanoadditive during 3D printing Fused Filament Fabrication (FFF). Simultaneous Small and Wide Angle X-ray Scattering experiments (SAXS and WAXS) were performed “in situ” under “operando” conditions. The X-ray experiments clearly reveal the presence of a polar phase in the PVDF-HFP/EG while for PVDF-HFP its presence is not obvious. Complementary Fourier Transform Infrared Spectroscopy experiments corroborate the presence of the polar phase for both materials. For PVDF-HFP crystallization is faster at the interfaces (polymer-air and polymer-polymer) than in other points within a printed line, being the crystallinity lower at the interfaces. However, for the PVDF-HF composite, neither crystallization rate nor crystallinity is dependent on position. The effect of EG, acting as nucleating agent, has been discussed as being the reason for this behavior., This work has been funded by grants PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-131914B–I00 and TED2021-129845B–I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe", and by the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). The authors acknowledge the collaboration of ALBA staff for the experiments performed in NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Vall` es, Barcelona, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of solvent polarity in controlling the formation of electroactive β/γ-phases in poly(vinylidene fluoride) nanoparticles

  • Sena-Fernández, Jose
  • Toledano, Oscar
  • Santoro, Gonzalo
  • Sanz, Mikel
  • Gálvez, Oscar
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
9 pages, 8 figures . -- This article is part of a special issue entitled: FERROL2025 published in Polymer., We systematically investigate the dominant role of solvent polarity in the formation of electroactive phases of poly(vinylidene fluoride) (PVDF) by combining comprehensive experimental characterization (IR spectroscopy, X-ray scattering, Atomic Force Microscopy) with molecular dynamics (MD) simulations. We demonstrate that the solvent dipole moment dictates the stabilization of polar chain conformations in the solution and, consequently, the crystallization of electroactive β and γ polymorphs (reported here jointly as β/γ) in both solvent-cast bulk deposits and water-dispersed nanoparticles (NPs). A critical dipole-moment threshold of μ ≈ 2.8 D is identified: solvents above this value consistently yield electroactive phase contents exceeding 50 %, regardless of the processing route. MD simulations reveal that polar solvents strengthen PVDF–solvent dipole coupling and increase the population of all-trans (TTT) conformers, in agreement with the experimentally determined electroactive fractions. Furthermore, the incorporation of water as a polar antisolvent during nanoprecipitation enhances the electroactive phase content of the crystallites in NPs relative to bulk samples. The combined experimental–computational approach provides a unified molecular-level understanding of solvent-driven polymorph selection in PVDF and offers practical guidelines for solvent and process design to engineer high-performance electroactive PVDF structures from the macro-to the nanoscale., This work was supported by grant PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033, and by grants TED2021- 131914B–I00 and TED2021-129845B–I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. JS acknowledge the funding by MCIN/AEI/10.13039/501100011033 through grant number PRE2020-094362. The authors acknowledge the ALBA staff from beamline NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Valles, Barcelona, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics in renewable sourced random poly(trimethylene 2,5-furanoate-co-trimethylene suberate) copolymers: ambient-pressure fragility and compensation law in secondary relaxations

  • Zubkiewicz, A.
  • Sanz, Alejandro
  • Ezquerra, Tiberio A.
  • Szymczyk, A.
13 pages 11 figures, 3 tables, This article presents an experimental study on the relaxation dynamics in a series of random copolymers with optimum gas barrier properties based on bio-friendly monomers. The relaxation response of poly(trimethylene 2,5-furanoate-co-trimethylene suberate) copolymers is examined in the glassy and viscoelastic regime via frequency-domain spectroscopies (dielectric and mechanical). We report lower values of dynamic fragility, a dimensionless index introduced in 1985 [C. A. Angell, Relaxations in Complex Systems, ed. K. Ngai and G. B. Wright, National Technical Information Service, US Department of Commerce, Springield, VA, 1985, p. 3; C. A. Angell, Formation of glasses from liquids and biopolymers, Science, 1995, 267(5206), 1924–1935], in comparison to conventional polyesters used in industry, such as poly(ethylene terephthalate). We propose that this is consistent with their low permeability to gases. The sub-glass dynamics is complex and can be described by two local modes, β and β, whereas for poly(trimethylene 2,5-furanoate) and the copolymer with the lowest suberate unit content we detect a single β relaxation. Our study reveals that sub-T relaxations obey the so-called compensation law, which is interpreted with respect to the multiexcitation entropy model by Yelon and Movaghar, and the more recent collective small displacements model., TAE thanks the Spanish Ministry of Science and Innovation (MCIN) and the State Research Agency (AEI) for funding through projects PID2022-138635NB-I00 and TED2021-129845B-I00 (MCIN/ AEI/10.13039/501100011033), co-funded by the European Regional Development Fund (ERDF, ‘‘A way of making Europe’’).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Peripheral Dendritic Functionalization Effects on the Self-Assembly and Thermoresponsive Behavior of Nonionic Amphiphilic Linear–Dendritic Block Copolymers in Aqueous Media

  • Martín-Martín, Javier
  • Folch-Cirujeda, Luis
  • Yus, Cristina
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Abad, Miriam
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
Nonionic amphiphilic block copolymers with a precise linear–dendritic architecture that exhibit thermoresponsive behavior in water are described. These copolymers consist of a hydrophilic poly(ethylene glycol) (PEG) block connected to a thermoresponsive block based on the fourth generation of 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) polyester dendron, functionalized at the periphery with either ureido or glycinamide groups. In water, these linear–dendritic block copolymers (LDBCs) self-assemble into different nanostructures whose size, morphology, and thermoresponse are strongly dependent on the peripheral groups and PEG chain length. The LDBC bearing peripheral ureido groups self-assembles into small micelles that, above the cloud point temperature (Tcp), evolve into a coacervate phase rather than fully dissolve. In contrast, the glycinamide-functionalized LDBCs display characteristic UCST-type behavior. The results demonstrate that subtle structural variations in the dendron periphery within a precise linear–dendritic architecture induce significant differences in the self-assembly and thermoresponse in water. Preliminary studies on the encapsulation and thermally triggered release of Nile Red, together with high cytocompatibility of these LDBCs toward several eukaryotic cell lines, suggest their potential for drug delivery systems.