Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Printing-Assisted Nanoimprint Lithography of Polymers

  • Martínez-García, Patricia
  • Rebollar, Esther
  • Nogales, Aurora
  • García-Gutiérrez, Mari Cruz
  • Sena-Fernández, Jose
  • Ezquerra, Tiberio A.
5 pags., 7 figs., Fused filament fabrication, commonly referred to as 3D printing, is an additive manufacturing method finding plenty of applications nowadays. In contrast, polymer nanopatterning by nanolithographic techniques plays an important role in obtaining functional surfaces and coatings for applications in different fields including micro- and nanoelectronics. In spite of their relevance, additive manufacturing and polymer nanolithography have not found yet a common niche to be developed. Although both approaches are oriented to achieve different types of objects, it is shown that the confluence of both technologies can be desirable and potentially convenient. Herein, it is demonstrated that by employing conventional 3D printing, it is possible to fabricate nanostructured polymer surfaces in a relatively simple way by using similar approaches as those used in nanoimprint lithography but without the need for clean room conditions. To do that, a printed-assisted nanoimprint lithography concept (3DPrANIL) has been tested for different types of polymer and silicon templates. It is demonstrated that a polymeric nanostructured hydrophilic template can be replicated accurately on another polymer rendering a nanostructured surface with enhanced hydrophobicity. The results support 3DPrANIL as novel method to obtain micro- and nanostructured surfaces with different functionalities like iridescence and hydrophobicity., This study was funded by AEI /10.13039 /501100011033/ Unión EuropeaNextGenerationEU/PRTR (grants PID2019-107514GB-I00/AEI/10.13039/501100011033, PID2019-106125GB-I00/ AEI/10.13039/501100011033,and TED2021-129845B-I00). Dr. G. Doerk is gratefully acknowledged(Center for Functional Nanomaterials, Brookhaven National Laboratory,USA) for the support in the preparation of silicon molds. The synchrotronexperiments were performed at NCD-SWEET beamline at ALBASynchrotron with the collaboration of M. Malfois and I.Šics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical approach to the crystal structure of poly(butylene 2,5-furandicarboxylate) as revealed by density functional theory

  • Toledano, Óscar
  • Gálvez, Óscar
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
12 pages, 13 figures, 1 table, In this work, we present a new model of the crystalline structure of the poly(butylene 2,5-furandicarboxylate) (PBF). This new structure has been derived using an ab initio density functional theory methodology and focusing on the agreement between the experimental and theoretical x-ray diffraction patterns. An extensive study has been performed to analyze the possible conformations that the polymeric strand can adopt in its crystalline form, leading to 60 initial crystalline structures. Due to thermal motion, which cannot be easily tackled with the ab initio methodology, and small inaccuracies, which are intrinsic to this calculation method, the theoretical unit cell dimensions can slightly differ from those obtained in the crystallization experiments. Thus, a structural refinement method has been employed to overcome these discrepancies and procure a crystalline structure whose x-ray diffraction pattern is consistent with the experimental one. For the proposed crystalline structure of PBF, both the powder diffraction pattern and the fiber diffraction diagram show a remarkable agreement with those available in the literature., We acknowledge the computational resources and assistance provided by the Centro de Computación de Alto Rendimiento CCAR-UNED and Drago HPC facilities from CSIC. O.T. acknowledges the financial support provided by the Ministerio de Universidades through the European Union-NextGenerationUE funds through a Margarita Salas fellowship. We also acknowledge the financial support provided by the following Grant Nos.: PID2022-138635NB-I00/AEI/10.13039/501100011033, TED 2021-129845B–I00, and TED2021-131914B–I00, funded by MCIN/ AEI/10.13039/501100011033 and by “ERDF A way of making Europe.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical micro-nanostructuring of polymer films by simultaneous laser interference and diffraction

  • Hernández, Jaime J.
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Gálvez, Óscar
  • Sanz, Mikel
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Rebollar, Esther
8 pages, 7 figures, 1 table, This study presents a laser-based method for creating hierarchical micro/nanostructures on polymer surfaces. By combining laser-induced periodic surface structures (LIPSS) with microscale diffraction patterns, using a 266 nm Nd:YAG laser and a mask, poly(bisphenol A carbonate) (PBAC) films were patterned. The interference between the incident laser beam and the light scattered on the surface leads to the formation of LIPSS aligned with laser polarization while, simultaneously, the use of masks with grids of 90 µm square holes induces Fresnel diffraction. The combination of both effects results in the formation of hierarchical structures that incorporate features at both nano- and microscale respectively. Atomic force microscopy revealed LIPSS formation at the square corners and at the center, with periodicities close to the laser wavelength. At low fluences or pulse numbers, only the diffraction pattern of the mask is observed. LIPSS increased hydrophilicity while the combination of diffraction and LIPSS increased the hydrophobicity. Adhesion force measurements, performed using the colloidal probe technique, indicated a significant increase near the structured edges of the irradiated areas, although at the nanoscale the differences are minimal. This study highlights the effective integration of micro and nanopatterns on polymeric surfaces using diffraction masks. Furthermore, it provides valuable information on how laser processing affects the morphology and properties of the surface, including wettability, adhesion, and mechanical properties. The ability to simultaneously modify the micro and nanoscale opens new avenues for the creation of functional polymeric surfaces with applications in various fields such as nanophotonics, biomedicine, and nanoelectronics., This work has been funded by grants PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033, TED2021-131914B-I00 and TED2021-129845B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe, and by the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). Thanks are given to Dr. Daniel Martínez-Tong for fruitful discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructuring aromatic polyimide surfaces by laser

  • Martínez-García, Patricia
  • Gálvez, Óscar
  • Sanz, Mikel
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
10 pages, 9 figures, 4 tables . -- This article is part of a special issue entitled: FERROL2025 published in Polymer, This study investigates the formation of Laser-Induced Periodic Surface Structures (LIPSS) on Kapton using UV nanosecond laser irradiation, focusing on optimizing irradiation parameters and analyzing their effects on surface properties. Optimal conditions were identified through systematic variation of laser fluence and pulse number. Spectroscopic analysis showed that laser nanostructuring occurs alongside chemical modifications, primarily confined to the material surface. Despite high irradiation temperatures, rapid cooling prevents carbonization, but oxidation takes place. This oxidation occurred in the outermost polymer film, explaining changes in water contact angle and surface energy, particularly an increase in the electron acceptor component. These results advance our understanding of LIPSS formation on Kapton and its impact on surface characteristics. The precise control over LIPSS morphology and the achievement of stable surface modifications create new opportunities for customized applications., This work has been funded by grants PID2022-138635NB-I00 and PID2021-126524NB-100 funded by MICIN/AEI/10.13039/ 501100011033, TED2021-129845B–I00, and TED2021-131914B–I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and TEC MATRIX-CM (TEC-2024/TEC-85) funded by the Regional Government of Madrid. We acknowledge the computational resources and assistance provided by the Centro de Computacion de Alto Rendimiento CCAR-UNED., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Nature of Fluorescence Modification Induced by Deformation in Regenerated Silk Fibroin

  • Santoro, Gonzalo
  • Toledano, Óscar
  • Horcajo Peribáñez, Iván
  • Rebollar, Esther
  • Ezquerra, Tiberio A.
  • Sena-Fernández, Jose
  • Solano, Eduardo
  • García-Gutiérrez, Mari Cruz
9 pages, 10 figures, 2 tables, The mechanical deformation of regenerated silk fibroin (RSF) films induces notable changes in their fluorescence properties, yet the underlying molecular mechanisms remain poorly understood. In this work, we investigate the interplay between mechanical, structural, and optical response of RSF films processed with glycerol (gly) and with polyethylene glycol (PEG) as a plasticizer. PEG-containing films exhibited enhanced ductility, a significant increase of the absorption coefficient in the UV spectral range and narrower fluorescence spectra, with reduced intensity at longer wavelengths, suggesting fewer cross-links. These differences in the mechanical and optical properties of the investigated polymers may be due to the higher amorphous phase content of the samples with PEG, as it is revealed by wide-angle X-ray scattering (WAXS). Ab initio calculations of model systems confirmed that fluorescence, primarily due to tryptophan residues, is highly sensitive to local conformation and hydrogen-bonding interactions. To elucidate the effect of deformation on silk fibroin fluorescence, WAXS patterns, using synchrotron radiation, and fluorescence spectra were acquired while simultaneous tensile measurements were performed. Notably, strain-induced backbone alignment favors the formation of electronically coupled cross-links, which give rise to the observed changes in fluorescence. These findings provide further insights into the structure-property relationships governing RSF fluorescence, with potential implications for the design of deformation-responsive biomaterials., This work has been funded by grants: TED2021-129845B−I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by PID2022-138635NBI00/AEI/10.13039/501100011033, and by the Regional Government of Madrid through the project TEC MATRIXCM (TEC-2024/TEC-85). Authors acknowledge Dr. I. Tanarro and Dr. R. Peláez for support with the fluorescence spectrometer used for the in situ measurements. 2D WAXS experiments were performed at ALBA synchrotron (proposal 2024028365) with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of solvent polarity in controlling the formation of electroactive β/γ-phases in poly(vinylidene fluoride) nanoparticles

  • Sena-Fernández, Jose
  • Toledano, Oscar
  • Santoro, Gonzalo
  • Sanz, Mikel
  • Gálvez, Oscar
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
9 pages, 8 figures . -- This article is part of a special issue entitled: FERROL2025 published in Polymer., We systematically investigate the dominant role of solvent polarity in the formation of electroactive phases of poly(vinylidene fluoride) (PVDF) by combining comprehensive experimental characterization (IR spectroscopy, X-ray scattering, Atomic Force Microscopy) with molecular dynamics (MD) simulations. We demonstrate that the solvent dipole moment dictates the stabilization of polar chain conformations in the solution and, consequently, the crystallization of electroactive β and γ polymorphs (reported here jointly as β/γ) in both solvent-cast bulk deposits and water-dispersed nanoparticles (NPs). A critical dipole-moment threshold of μ ≈ 2.8 D is identified: solvents above this value consistently yield electroactive phase contents exceeding 50 %, regardless of the processing route. MD simulations reveal that polar solvents strengthen PVDF–solvent dipole coupling and increase the population of all-trans (TTT) conformers, in agreement with the experimentally determined electroactive fractions. Furthermore, the incorporation of water as a polar antisolvent during nanoprecipitation enhances the electroactive phase content of the crystallites in NPs relative to bulk samples. The combined experimental–computational approach provides a unified molecular-level understanding of solvent-driven polymorph selection in PVDF and offers practical guidelines for solvent and process design to engineer high-performance electroactive PVDF structures from the macro-to the nanoscale., This work was supported by grant PID2022-138635NB-I00 funded by MCIN/AEI/10.13039/501100011033, and by grants TED2021- 131914B–I00 and TED2021-129845B–I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. JS acknowledge the funding by MCIN/AEI/10.13039/501100011033 through grant number PRE2020-094362. The authors acknowledge the ALBA staff from beamline NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Valles, Barcelona, Spain)., Peer reviewed