Pasar al contenido principal

Functional Materials based on Liquid Crystals

RYC2021-031154-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic liquid crystalline calixarene with photo-switchable proton conduction

  • Concellón, Alberto
  • Marín, Iván
  • Barberá, Joaquín
  • Marcos, Mercedes
  • Serrano, José Luis
We have developed a new strategy for the preparation of a light-responsive ionic liquid crystal (LC) that shows photo-switchable proton conduction. The ionic LC consists of a bowl-shaped calix[4]arene core ionically functionalized with azobenzene moieties. The non-covalent architectures were obtained by the formation of ionic salts between the carboxylic acid group of an azo-derivative and the terminal amine groups of a calixarene core. The presence of ionic salts results in a hierarchical self-assembly process that extends to the formation of a nanostructured lamellar LC arrangement (smectic A phase). In this LC phase, the ionic LC calixarene is able to display proton conductive properties, since the ionic nanosegregated areas (formed by the ionic pairs) generate the continuous channels that favor proton transport. The optical and photo-responsive properties were studied by UV-Vis spectroscopy, demonstrating that the azobenzene moieties of the ionic LC undergo reversible (E)-to-(Z) isomerization by irradiation with UV light. Interestingly, this (E)-to-(Z) photoisomerization results in a decrease of the proton conductivity values since the bent-shaped (Z)-isomer disrupts the lamellar LC phase. This isomerization process is totally reversible and leads to an ionic LC material with unique photo-switchable proton conductive properties., This work was supported by the MCIU/AEI/FEDER-UE funds (PGC2018-097583-B-I00 and PID2021-122882NB-I00), and Gobierno de Aragón-FSE (Research Group E47_17R). A. C. thanks the ‘Ramón y Cajal Program’ (Grant No. RYC2021-031154-I) funded by MCIN/AEI/10.13039/501100011033 and EU-‘NextGenerationEU’/PRTR. Authors would like to acknowledge the use of the SAI (UZ) and CEQMA (UZ-CSIC) Services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic self-assembly of pillar[5]arenes: proton-conductive liquid crystals and aqueous nanoobjects with encapsulation properties

  • Marín, Iván
  • Merino, R. I.
  • Barberá, Joaquín
  • Concellón, Alberto
  • Serrano, José Luis
Liquid crystal (LC) pillar[n]arenes have been barely explored due to their time-consuming and complicated synthesis, despite their promising properties for metal-ion separation, drug delivery, or surface functionalization. Herein, we report an easy and reliable method to functionalize pillar[n]arene macrocycles through electrostatic interactions. These ionic materials were prepared by ionically functionalizing a pillar[n]arene containing ten amine terminal groups with six different carboxylic acids. This supramolecular approach results in ionic pillar[n]arenes which self-organize into LC phases with good proton-conducting properties. Moreover, ionic functionalization provides a new amphiphilic character to the pillar[n]arenes, which self-assemble in water to produce a variety of nanoobjects (i.e., spherical or cylindrical micelles, vesicles, solid nanospheres, or nanotubes) that are capable of encapsulating a model hydrophobic drug. Interestingly, the presence of coumarin moieties in the chemical structure of the ionic pillar[n]arenes results in self-organized materials with light-responsive properties due to the ability of coumarins to undergo photo-induced [2+2] cycloaddition. In particular, we demonstrate that coumarin pohotodimerization can be employed to fabricate mechanically stable proton-conductive LC materials, as well as to obtain photo-responsive nanocarriers with light-induced release of encapsulated molecules., This work was financially supported by the Spanish projects PGC2018-097583-B-I00, PID2021-122882NB-I00, MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, the Gobierno de Aragón-FSE (E47_23R-research group). A. C. acknowledges grant RYC2021-031154-I funded by MICINN/AEI/FEDER/EU-NextGenerationEU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid crystal emulsions: A versatile platform for photonics, sensing, and active matter

  • Concellón, Alberto
The self-assembly of liquid crystals (LCs) is a fascinating method for controlling the organization of discrete molecules into nanostructured functional materials. Although LCs are traditionally processed in thin films, their confinement within micrometre-sized droplets has recently revealed new properties and functions, paving the way for next-generation soft responsive materials. These recent findings have unlocked a wealth of unprecedented applications in photonics (e.g. reflectors, lasing materials), sensing (e.g. biomolecule and pathogen detection), soft robotics (e.g. micropumps, artificial muscles), and beyond. This Minireview focuses on recent developments in LC emulsion designs and highlights a variety of novel potential applications. Perspectives on the opportunities and new directions for implementing LC emulsions in future innovative technologies are also provided., This work was supported by the European Union's Horizon 2020 research and innovation program (GA No. 101062667), the “Ramón y Cajal” program (RYC2021-031154-I) funded by MCIN/AEI/10.13039/501100011033 and EU-“NextGenerationEU”/PRTR, and the Gobierno de Aragón-FSE (Research Group E47_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydantoin hexameric rosettes: harnessing H-bonds for supergelation and liquid crystals

  • González, Lucía
  • Marín, Iván
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Romero, Pilar
  • Concellón, Alberto
  • Uriel, Santiago
  • Serrano, José Luis
We have synthesized two geometric isomers of a cyclohexane-5-spirohydantoin derivative (1,3-diazaspiro[4.5]decane-2,4-dione) incorporating a hydrophobic phenyl 3,4,5-tris(dodecyloxy)benzoate unit at position 8. Separation of these diastereomers was accomplished through silica gel flash chromatography. The interplay of intermolecular hydrogen bonding and micro-segregation between the polar hydantoin unit and nonpolar aliphatic chains within the molecule endows them with remarkable self-assembly capabilities, both in solution and in the solid state. These hydantoin derivatives spontaneously form rosette-shaped structures composed of six molecules. In the solid state, these compounds display hexagonal columnar liquid crystal phases, with hydrogen-bonded disks as their fundamental building blocks. Similarly, when exposed to apolar solvents such as cyclohexane or dodecane, they adopt a columnar arrangement, resulting in gel formation comprising nanoscale fibers that intricately interlace to form a network. Remarkably, the two isomers exhibit markedly different properties. The major isomer behaves as a glassy liquid crystalline material, while the minor one exhibits liquid crystalline behavior with a high propensity to crystallize. Our experimental findings, in combination with theoretical studies, underscore the fundamentally distinct supramolecular organizations present in these isomers, shedding light on their unique self-assembling properties., This work was supported by the MINECO–FEDER funds PGC2018-097583-B-I00, PID2021-122882NB-I00 and PID2021-126132-NB-I00 (MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”) and Gobierno de Aragón–FEDER (Research Group E47_23R). A. C. acknowledges grant RYC2021-031154-I funded by the MICINN/AEI/FEDER/EU–NextGenerationEU. The authors would like to acknowledge the use of the SAI (UZ), CEQMA (UZ–CSIC) Services and the Laboratorio de Microscopias Avanzadas-LMA (INMA-UZ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

4D printing of liquid crystal emulsions for smart structures with multiple functionalities

  • Concellón, Alberto
  • Mainik, Philipp
  • Vazquez-Martel, Clara
  • Álvarez-Solana, Cristina
  • Blasco, Eva
3D printing, and more recently 4D printing, has emerged as a transformative technology for fabricating structures with complex geometries and responsive properties. However, employing functional colloidal solutions as inks for printing remains unexplored. In this work, we present a novel and versatile 4D printing approach for fabricating functional and complex-shaped objects using polymerizable liquid crystal (LC) emulsion droplets. Leveraging a digital light processing (DLP) 3D printing technique, we achieve rapid production of intricate 3D geometries with high resolution. The printed structures retain the LC ordering from the precursor droplets, imparting the final objects with shape memory properties, including shape fixation and recovery upon heating or light exposure. Light-responsive behavior is introduced post-printing by embedding an azo dye into the 3D structures. Additionally, we explore the potential to create intrinsically porous 3D structures by selectively removing non-reactive components from the printed geometries, adding an extra level of functionality to the printed objects. Furthermore, we incorporate chiral nematic LCs into the emulsion droplets, producing 3D objects with tunable reflective properties. To our knowledge, this is the first example of DLP 3D printing with emulsions, offering an effective and versatile pathway for developing 4D-printed materials with potential applications in optics, robotics, microfluidics, and biomedicine., A.C. gratefully acknowledges financial support from the projects PID2023-146811NA−I00 and CEX2023-001286-S, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; JIUZ2023-CIE-04 and CB5/23, funded by Fundación Ibercaja-UNIZAR; and the Gobierno de Aragón-FSE (research group E47_23R). A.C. is also grateful for grant RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. E.B. acknowledges the funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) via the Excellence Cluster “3D Matter Made to Order” (EXC-2082/1-390761711) and the Carl Zeiss Foundation through the “Carl-Zeiss-Foundation-Focus@HEiKA”. C.V.M. thanks the Fonds der Chemischen Industrie for financial support (Kekulé Fellowship). In addition, R. Schröder, I. Wagner and R. Curticean are thanked for the access and training at the electron microscopy facilities. The authors would also like to acknowledge the use of the SAI (UNIZAR) and CEQMA (UNIZAR-CSIC) services., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in langmuir–blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José Luis
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well-organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well-organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying-flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo-cross linking, leading to the formation of a compact photo-crosslinked film. Incubation of these photo-crosslinked films in a solution containing 1-hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces., E.E., S.M., and P.C. thank PID2019-105881RB-I00 and PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as TED2021-131318B-I00 funded by MCIN/ AEI/10.13039/501100011033/ and Unión Europea NextGenerationEU/PRTR. J.L.S. and A.C. acknowledge PGC2018-097583-I00 and PID2021-122882NBI00 funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”. A.C. is grateful for grant RYC2021-031154-I funded by MICINN/AEI/FEDER/EU-NextGenerationEU. The authors also acknowledge Gobierno de Aragón–FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R) and CLIP (E47_23R). E.E. thanks the award of a DGA fellowship from the Government of Aragon and the mobility funding for international research stays. G.Z. acknowledges funding through AlmaAttrezzature from the University of Bologna. The authors would like to acknowledge the use of the SAI (UNIZAR), CEQMA (UNIZAR–CSIC) Services, and Laboratorio de Microscopias Avanzadas-LMA (UNIZAR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disrupting J-aggregation in triazatruxene dimers to develop responsive luminescent inks for anti-counterfeiting applications

  • Martín, Raúl
  • Echeverri, Marcelo
  • González, Francisco
  • Andrés, Alicia de
  • Ruiz Delgado, M. Carmen
  • Concellón, Alberto
  • Serrano, José Luis
  • Gómez-Lor, Berta
The fight against counterfeiting is a crucial concern for economies around the world, underscoring the urgent need for effective measures to ensure the legitimacy of products and documents. Luminescent security inks have emerged as effective tools in this battle. The third generation of these inks, incorporating stimuli-responsive organic materials, enables unique efficiency. In this work, the stimuli-responsive behavior of three trialkylated triazatruxene dimers (TRI1, TRI2, and TRI3), endowed with N-alkyl chains of different length is investigated. Among them, TRI3, with three flexible dodecyl chains, shows remarkable stimuli-responsive fluorescence that is attributed to thermally or shear-induced phase transitions between a tetragonal columnar phase and a discotic-nematic liquid crystal phase. Such transformation involves the breakdown of highly emissive J-aggregates with a strong influence on the resulting emissive color. Interestingly, these stimuli-triggered transformations are spontaneously reversed, which renders this compound very interesting in the search of third-generation security inks., This research was funded by MCIN/AEI/ 10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR" (PDC2021-121002-I00, PID2023-150022NB-I00, PID2022-139548NB-I00, PID2023-146811NA-I00 and CEX2023-001286-S) by Junta de Andalucia (P09FQM-4708 and P18-FR-4559) and Gobierno de Aragon-FSE (E47_23R). R. Martin acknowledges the Spanish Ministry of Universities for a Margarita Salas postdoctoral fellowship under the agreement UNI/551/2021.A. Concellon is grateful for grant RYC2021-031154-I funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. The authors would like to thank the computer resources, technical expertise, and assistance provided by the SCBI (Supercomputing and Bioinformatics)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Halogen-bonded ionic liquid crystals: supramolecular organization and ionic transport

  • Marcos, Mercedes
  • Concellón, Alberto
  • Terrel, Almudena
  • Merino, R. I.
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Serrano, José Luis
  • Uriel, Santiago
This article is part of the themed collection: Honorary collection in memory of Professor Dr Helmut Ringsdorf., Ionic liquid crystals (ILCs) are emerging materials that combine the anisotropic self-assembly of liquid crystals with the ionic conductivity of ionic liquids, making them promising candidates for electrochemical applications such as ion-conducting membranes and next-generation electrolytes. In this work, we report the synthesis and characterization of a series of 1-alkyl-3-halopyridinium halides, where both the cationic and anionic components participate in halogen bonding, leading to enhanced mesophase stability and well-defined ionic nanochannels. Compounds with alkyl chains of 12 carbons or longer exhibit Smectic A liquid crystalline phases, with their stability increasing with chain length and halogen bond strength. X-ray diffraction analysis confirms the role of halogen bonding in driving molecular self-assembly and charge segregation, key factors in mesophase formation. Ionic conductivity measurements demonstrate that these ILCs facilitate ion transport through their nanosegregated ionic domains, with conductivities comparable to other liquid crystalline electrolytes. These findings highlight the potential of halogen-bonded ILCs as functional materials for electrochemical devices, providing a tunable platform for the development of advanced ion-conducting materials., This work was financially supported by the projects PID2023-146811NA-I00, PID2021-122882NB-I00, PID2021-126132-NB-I00, and CEX2023-001286-S, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF: A way of making Europe,” and by the Gobierno de Aragón-FSE (research groups E47_23R and T02_23R). A. C. acknowledges grant RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors would like to acknowledge the use of the SAI (UNIZAR), CEQMA (UNIZAR-CSIC), and the Crystallography Service of the UPV/EHU. R. M. T. acknowledges the resources provided by the supercomputer Memento and the technical assistance of BIFI-ZCAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible phase transitions of anionic and cationic surfactant mixtures drive shape morphing droplets

  • Frank, Bradley D.
  • Romero, Pilar
  • Concellón, Alberto
  • Zeininger, Lukas
Converting chemical signals into mechanical responses is fundamental to biological systems, driving processes such as cellular motility and tissue morphogenesis. Yet, harnessing chemo-mechanical signal conversions in synthetic systems remains a key challenge in energy-dissipative materials design. While droplets can move and interact with their environment reminiscent of active biological matter, chemo-mechanical interactions are limited by the translation of chemical changes into extensive force variations required on small timescales. Droplets naturally adopt spherical shapes to minimize surface-energy and restructuring liquids into non-equilibrium geometries requires mechanisms beyond current stimuli-responsive surfactant systems, which lack the force-amplifying mechanisms needed for transient liquid structuring. Here, a spring-like charging and latch-controlled release mechanism is introduced for actuating droplets. This is based on reversible, light-induced crystal-to-coacervate phase transitions of photo-responsive surfactant assemblies, namely between anionic sodium dodecylsulfate and cationic azobenzene-based surfactants. During phase-transition, reversible partitioning of the surfactants into the oil or aqueous phases of the emulsion transiently induce rapid changes in interfacial tensions, which are up to 900 times greater than those observed for conventional stimuli-responsive surfactant systems. The insights into this novel chemo-mechanical transduction mechanism provide new control over purely liquid systems, paving the way for programmable, hierarchically structured, all-liquid matter acting with physicality., he authors gratefully acknowledge financial support from the German Research Foundation through the Emmy-Noether program under grant no. ZE 1121/3-1 and the Max Planck Society. P.R. and A.C. acknowledge financial support from projects PID2021-126132NB-I00, PID2023-146811NA-I00, and CEX2023-001286-S funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”, as well as from the Gobierno de Aragón-FSE (research group E47_23R). A.C. also gratefully acknowledges grant RYC2021-031154-I funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. P.R. and A.C. would like to acknowledge the use of the SAI (UNIZAR), and CEQMA (UNIZAR-CSIC) Services., Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shaping liquid crystal polymer networks: From molecular design and processing to multifunctional materials

  • Abad, Miriam
  • Martínez-Bueno, Alejandro
  • Concellón, Alberto
Liquid crystal polymer networks (LCNs) are soft, anisotropic materials that combine the order and responsiveness of liquid crystals (LCs) with the mechanical stability of polymer matrices. By polymerizing mesogenic monomers within their LC phase, LCNs retain orientational order while gaining robustness and stimuli-responsiveness. Advances in molecular design, alignment techniques, and crosslinking chemistry have enabled precise control over structure and function across multiple length scales. In addition, emerging approaches such as additive manufacturing, “click” chemistry, and dynamic covalent bonding further expand the design space toward reconfigurable and sustainable materials. These materials exhibit programmable and reversible responses to heat, light, and electric or magnetic fields, enabling applications in soft actuation, adaptive optics, and dynamic surfaces. Cholesteric LCNs offer tunable optical properties via pitch modulation, which are exploited in sensors, smart windows, and mirrorless lasers. Nanoporous LCNs provide well-defined nanoscale pathways for separation and electrochemical applications. This review highlights how molecular alignment, network formation, and processing strategies converge to define material performance and multifunctionality. Key challenges remain in achieving scalable fabrication, long-term operational stability, and integration into real-world devices. Nevertheless, LCNs are positioned as a versatile platform for next-generation technologies in soft robotics, adaptive optics, and advanced membrane systems., A.C. gratefully acknowledges financial support from the projects PID2023-146811NA-I00 and RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, as well as from the Fundación Ramón Areces (XXII Concurso Nacional de Ciencias de la Vida y de la Materia). M.A. acknowledges funding from MCIN, with funds from the European Union NextGenerationEU (PRTR-C17.I1), promoted by the Gobierno de Aragón. This work was also supported by the Gobierno de Aragón–FSE (research group E47_23R). INMA acknowledges financial support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescence transduction of liquid crystal ordering transitions for biosensing

  • Vera-Arévalo, Mauricio
  • Concellón, Alberto
Liquid crystal (LC) ordering transitions are exquisitely sensitive to molecular interactions at aqueous interfaces and have long served as the basis for optical biosensors. However, the readout of these transitions has almost exclusively relied on polarized-light optical microscopy, which limits quantification and hinders practical deployment. Here, we report a fluorescence-based transduction scheme that converts LC ordering transitions to quantitative optical outputs. Our strategy employs amphiphilic block copolymers bearing aggregation-induced emission (AIE) motifs that undergo dynamic covalent conjugation with IgG antibodies through reversible imine chemistry. In complex LC emulsions, polymer surfactants localize differently depending on droplet LC configuration: accumulation at monopolar defects concentrates AIE units to generate a bright ON state, whereas redistribution along the LC/water interface in the radial configuration suppresses emission to yield an OFF state. Recognition of Salmonella enterica serovar Typhimurium─one of the most prevalent foodborne pathogens─reversibly perturbs this equilibrium, producing rapid (∼1 h) ON/OFF fluorescence responses with detection limits down to 102 cells/mL. Incorporation of a ratiometric reference dye further enhances robustness against experimental variability. This work establishes the fluorescence transduction of LC ordering transitions as a generalizable and portable sensing paradigm, bridging soft matter design with real-world diagnostics., This work was financially supported by the projects PID2023-146811NA-I00 and RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. This work was also supported by the Gobierno de Aragón–FSE (research group E47_23R). M.V.-A. thanks MCIU for his PhD grant (FPU24/01406). The authors would also like to acknowledge the use of the SAI (UNIZAR) and CEQMA (UNIZAR-CSIC) services. INMA acknowledges financial support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembled nanostructured microgels with reconfigurable morphologies

  • Álvarez-Solana, Cristina
  • Concellón, Alberto
  • Ros, M. Blanca
We report a new class of supramolecularly assembled complex emulsions in which nanostructured organogels derived from bent-core amphiphiles constitute one of the internal compartments. The molecular design of these amphiphiles, combining biphenyl (Bi) or ester (B1) lateral units with tetraethylene glycol and alkyl terminal chains, promotes efficient aggregation pathways and robust gelation. The resulting organogels exhibit fibrillar, tubular, and helical networks, with several systems displaying hierarchical arrangements characteristic of helical nanofilament (HNF) organizations, thereby transcribing liquid-crystalline order into gel phases. Emulsification of the organogels into aqueous media yields supramolecular microgels that not only preserve their internal fibrillar architectures but also retain HNF-like order, representing the first demonstration of nanostructured microgels formed through the self-assembly of low-molecular-weight amphiphiles. Beyond single microgels, we prepare complex emulsions in which an organogel phase coexists with a fluorocarbon oil. These multicompartment droplets exhibit dynamic reconfigurability, switching between organogel-in-fluorocarbon-in-water (OG/F/W), Janus, and fluorocarbon-in-organogel-in-water (F/OG/W) morphologies. The ability to couple bent-core self-assembly with colloidal processing into reconfigurable complex emulsions establishes nanostructured microgels as an innovative adaptive soft-material platform with opportunities in sensing, controlled delivery, bioimaging, and photonic technologies., INMA acknowledges financial support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI/10.13039/501100011033. This work was financially supported by projects PID2023-146811NA-I00, PID2021-122882NB-I00, and PID2024-156641NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF: A way of making Europe”. A.C. acknowledges grant RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Additional support was provided by the Gobierno de Aragón–FSE (research group E47_23R and PhD grant for C.A.-S.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shape-changing multiphase microparticles from complex liquid crystal emulsions

  • Turriani, Marco
  • Parmeggiani, Camilla
  • Martella, Daniele
  • Concellón, Alberto
Complex multiphase emulsions containing liquid crystals (LCs) offer precise morphological control and dynamic tunability, enabling applications in optics, sensing, and soft matter. Here, we report a simple and scalable bulk-emulsification strategy that circumvents the reliance on microfluidic fabrication to produce liquid crystalline network (LCN) microparticles spanning single, double (Janus), and triple emulsion morphologies within a genuinely colloidal size regime (10–20 µm). By adjusting crosslinking density and interfacial conditions, we program the LC alignment within the droplets, thereby dictating the mode and direction of actuation after photopolymerization. Single emulsions, Janus particles—coupling an active LCN hemisphere to a passive PDMS compartment—and, for the first time, triple LC emulsions—incorporating a third immiscible phase (a fluorinated oil)—are obtained via this straightforward and scalable approach. Across all morphologies, the particles exhibit robust, reversible, large-amplitude deformations under heating, as well as chemoresponsivity through anisotropic swelling in organic solvents. In addition, the Janus particles exhibit gravitational self-orientation, while the triple LC emulsions retain their multiphase architecture and display tunable geometries. As a proof of concept, these responsive behaviors are exploited to realize adaptive microlenses with thermally tunable focal plane and magnification, establishing complex LC emulsions as a scalable platform for multifunctional microactuators., A.C. thanks financial support from the projects PID2023-146811NA-I00 and RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and “ERDF: A way of making Europe”; from the Fundación Ramón Areces through the XXII Concurso Nacional de Ciencias de la Vida y de la Materia (project CIVP22A7601); and from the Gobierno de Aragón–FSE (research group E47_23R). C.P. acknowledges financial support from the project “ALICE” (proposal code 20224EBZ3Y – CUP J53D23008450006) granted by the European Union - NextGenerationEU under the National Recovery and Resilience Plan (PNRR) - Mission 4 Education and research - Component 2 From research to business - Investment 1.1 Notice Prin 2022 - DD N. 104 del 02/02/2022, and the financial support provided by the MUR – Dipartimenti di Eccellenza 2023-2027 (DICUS 2.0) to the Department of Chemistry “Ugo Schiff” of the University of Florence. The authors gratefully acknowledge the use of SAI (UNIZAR) and CEQMA (UNIZAR-CSIC) Services. INMA acknowledges financial support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liquid Crystal Emulsions: A Versatile Platform for Photonics, Sensing, and Active Matter

  • Concellón, Alberto
The self‐assembly of liquid crystals (LCs) is a fascinating method for controlling the organization of discrete molecules into nanostructured functional materials. Although LCs are traditionally processed in thin films, their confinement within micrometre‐sized droplets has recently revealed new properties and functions, paving the way for next‐generation soft responsive materials. These recent findings have unlocked a wealth of unprecedented applications in photonics (e.g. reflectors, lasing materials), sensing (e.g. biomolecule and pathogen detection), soft robotics (e.g. micropumps, artificial muscles), and beyond. This Minireview focuses on recent developments in LC emulsion designs and highlights a variety of novel potential applications. Perspectives on the opportunities and new directions for implementing LC emulsions in future innovative technologies are also provided.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ionic self-assembly of pillar[5]arenes: proton-conductive liquid crystals and aqueous nanoobjects with encapsulation properties

  • Marín, Iván
  • Merino, Rosa I.
  • Barberá, Joaquín
  • Concellón, Alberto
  • Serrano, José L.
Liquid crystal (LC) pillar[n]arenes have been barely explored due to their time-consuming and complicated synthesis, despite their promising properties for metal-ion separation, drug delivery, or surface functionalization. Herein, we report an easy and reliable method to functionalize pillar[n]arene macrocycles through electrostatic interactions. These ionic materials were prepared by ionically functionalizing a pillar[n]arene containing ten amine terminal groups with six different carboxylic acids. This supramolecular approach results in ionic pillar[n]arenes which self-organize into LC phases with good proton-conducting properties. Moreover, ionic functionalization provides a new amphiphilic character to the pillar[n]arenes, which self-assemble in water to produce a variety of nanoobjects (i.e., spherical or cylindrical micelles, vesicles, solid nanospheres, or nanotubes) that are capable of encapsulating a model hydrophobic drug. Interestingly, the presence of coumarin moieties in the chemical structure of the ionic pillar[n]arenes results in self-organized materials with light-responsive properties due to the ability of coumarins to undergo photo-induced [2+2] cycloaddition. In particular, we demonstrate that coumarin pohotodimerization can be employed to fabricate mechanically stable proton-conductive LC materials, as well as to obtain photo-responsive nanocarriers with light-induced release of encapsulated molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ionic liquid crystalline calixarene with photo-switchable proton conduction

  • Concellón, Alberto
  • Marín, Iván
  • Barberá, Joaquín
  • Marcos, Mercedes
  • Serrano, José L.
We have developed a new strategy for the preparation of a light-responsive ionic liquid crystal (LC) that shows photo-switchable proton conduction. The ionic LC consists of a bowl-shaped calix[4]arene core ionically functionalized with azobenzene moieties. The non-covalent architectures were obtained by the formation of ionic salts between the carboxylic acid group of an azo-derivative and the terminal amine groups of a calixarene core. The presence of ionic salts results in a hierarchical self-assembly process that extends to the formation of a nanostructured lamellar LC arrangement (smectic A phase). In this LC phase, the ionic LC calixarene is able to display proton conductive properties, since the ionic nanosegregated areas (formed by the ionic pairs) generate the continuous channels that favor proton transport. The optical and photo-responsive properties were studied by UV-Vis spectroscopy, demonstrating that the azobenzene moieties of the ionic LC undergo reversible (E)-to-(Z) isomerization by irradiation with UV light. Interestingly, this (E)-to-(Z) photoisomerization results in a decrease of the proton conductivity values since the bent-shaped (Z)-isomer disrupts the lamellar LC phase. This isomerization process is totally reversible and leads to an ionic LC material with unique photo-switchable proton conductive properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydantoin hexameric rosettes: harnessing H-bonds for supergelation and liquid crystals

  • González, Lucía
  • Marín, Iván
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Romero, Pilar
  • Concellón, Alberto
  • Uriel, Santiago
  • Serrano, José L.
We have synthesized two geometric isomers of a cyclohexane-5-spirohydantoin derivative (1,3-diazaspiro[4.5]decane-2,4-dione) incorporating a hydrophobic phenyl 3,4,5-tris(dodecyloxy)benzoate unit at position 8. Separation of these diastereomers was accomplished through silica gel flash chromatography. The interplay of intermolecular hydrogen bonding and micro-segregation between the polar hydantoin unit and nonpolar aliphatic chains within the molecule endows them with remarkable self-assembly capabilities, both in solution and in the solid state. These hydantoin derivatives spontaneously form rosette-shaped structures composed of six molecules. In the solid state, these compounds display hexagonal columnar liquid crystal phases, with hydrogen-bonded disks as their fundamental building blocks. Similarly, when exposed to apolar solvents such as cyclohexane or dodecane, they adopt a columnar arrangement, resulting in gel formation comprising nanoscale fibers that intricately interlace to form a network. Remarkably, the two isomers exhibit markedly different properties. The major isomer behaves as a glassy liquid crystalline material, while the minor one exhibits liquid crystalline behavior with a high propensity to crystallize. Our experimental findings, in combination with theoretical studies, underscore the fundamentally distinct supramolecular organizations present in these isomers, shedding light on their unique self-assembling properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dynamically reconfigurable complex liquid crystal emulsions

  • Terrel, Almudena
  • Moral, Silvia Del
  • Martínez-Bueno, Alejandro
  • Concellón, Alberto
Complex emulsions, containing liquid crystals (LCs) and immiscible oils such as fluorocarbon or silicone oils, present innovative functionalities in soft materials. These emulsions exhibit dynamic reconfiguration in droplet morphology and internal LC organisation, expanding applications in optics, sensing, and active matter. This review highlights the evolution and potential of LC-containing complex emulsions. Emphasis is placed on emulsions featuring dynamic and reversible morphological transformations and LC reorganisation, underpinning their suitability for tunable micro-lenses, chemical sensing, and biosensing. Nematic LCs within complex emulsions allow for topological defect-driven functionalization, attaching antibodies to induce substantial changes in the LC director field upon interfacial recognition events. This feature may facilitate the development of ultrasensitive chemical and biological sensors. Moreover, cholesteric LCs, through their selective reflection, enable the rapid and sensitive detection of foodborne pathogens. The controlled assembly of magnetic nanoparticles at interfaces illustrates advancements towards magnetic field-responsive and active colloids. Future perspectives include exploiting these properties for intelligent colloidal systems capable of autonomous behaviour, and furthering applications in dynamic photonic devices, high-security identification tags, and responsive lens systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in Langmuir–Blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José L.
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

4D Printing of Liquid Crystal Emulsions for Smart Structures with Multiple Functionalities

  • Concellón, Alberto
  • Mainik, Philipp
  • Vazquez-Martel, Clara
  • Álvarez-Solana, Cristina
  • Blasco, Eva
3D printing, and more recently 4D printing, has emerged as a transformative technology for fabricating structures with complex geometries and responsive properties. However, employing functional colloidal solutions as inks for printing remains unexplored. In this work, we present a novel and versatile 4D printing approach for fabricating functional and complex‐shaped objects using polymerizable liquid crystal (LC) emulsion droplets. Leveraging a digital light processing (DLP) 3D printing technique, we achieve rapid production of intricate 3D geometries with high resolution. The printed structures retain the LC ordering from the precursor droplets, imparting the final objects with shape memory properties, including shape fixation and recovery upon heating or light exposure. Light‐responsive behavior is introduced post‐printing by embedding an azo dye into the 3D structures. Additionally, we explore the potential to create intrinsically porous 3D structures by selectively removing non‐reactive components from the printed geometries, adding an extra level of functionality to the printed objects. Furthermore, we incorporate chiral nematic LCs into the emulsion droplets, producing 3D objects with tunable reflective properties. To our knowledge, this is the first example of DLP 3D printing with emulsions, offering an effective and versatile pathway for developing 4D‐printed materials with potential applications in optics, robotics, microfluidics, and biomedicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Halogen-bonded ionic liquid crystals: supramolecular organization and ionic transport

  • Marcos, Mercedes
  • Concellón, Alberto
  • Terrel, Almudena
  • Merino, Rosa I.
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Serrano, José L.
  • Uriel, Santiago
Ionic liquid crystals (ILCs) are emerging materials that combine the anisotropic self-assembly of liquid crystals with the ionic conductivity of ionic liquids, making them promising candidates for electrochemical applications such as ion-conducting membranes and next-generation electrolytes. In this work, we report the synthesis and characterization of a series of 1-alkyl-3-halopyridinium halides, where both the cationic and anionic components participate in halogen bonding, leading to enhanced mesophase stability and well-defined ionic nanochannels. Compounds with alkyl chains of 12 carbons or longer exhibit Smectic A liquid crystalline phases, with their stability increasing with chain length and halogen bond strength. X-ray diffraction analysis confirms the role of halogen bonding in driving molecular self-assembly and charge segregation, key factors in mesophase formation. Ionic conductivity measurements demonstrate that these ILCs facilitate ion transport through their nanosegregated ionic domains, with conductivities comparable to other liquid crystalline electrolytes. These findings highlight the potential of halogen-bonded ILCs as functional materials for electrochemical devices, providing a tunable platform for the development of advanced ion-conducting materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reversible Phase Transitions of Anionic and Cationic Surfactant Mixtures Drive Shape Morphing Droplets

  • Frank, Bradley D.
  • Romero, Pilar
  • Concellón, Alberto
  • Zeininger, Lukas
Converting chemical signals into mechanical responses is fundamental to biological systems, driving processes such as cellular motility and tissue morphogenesis. Yet, harnessing chemo‐mechanical signal conversions in synthetic systems remains a key challenge in energy‐dissipative materials design. While droplets can move and interact with their environment reminiscent of active biological matter, chemo‐mechanical interactions are limited by the translation of chemical changes into extensive force variations required on small timescales. Droplets naturally adopt spherical shapes to minimize surface‐energy and restructuring liquids into non‐equilibrium geometries requires mechanisms beyond current stimuli‐responsive surfactant systems, which lack the force‐amplifying mechanisms needed for transient liquid structuring. Here, a spring‐like charging and latch‐controlled release mechanism is introduced for actuating droplets. This is based on reversible, light‐induced crystal‐to‐coacervate phase transitions of photo‐responsive surfactant assemblies, namely between anionic sodium dodecylsulfate and cationic azobenzene‐based surfactants. During phase‐transition, reversible partitioning of the surfactants into the oil or aqueous phases of the emulsion transiently induce rapid changes in interfacial tensions, which are up to 900 times greater than those observed for conventional stimuli‐responsive surfactant systems. The insights into this novel chemo‐mechanical transduction mechanism provide new control over purely liquid systems, paving the way for programmable, hierarchically structured, all‐liquid matter acting with physicality.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Shaping Liquid Crystal Polymer Networks: From Molecular Design and Processing to Multifunctional Materials

  • Abad, Miriam
  • Martínez-Bueno, Alejandro
  • Concellón, Alberto
Liquid crystal polymer networks (LCNs) are soft, anisotropic materials that combine the order and responsiveness of liquid crystals (LCs) with the mechanical stability of polymer matrices. By polymerizing mesogenic monomers within their LC phase, LCNs retain orientational order while gaining robustness and stimuli‐responsiveness. Advances in molecular design, alignment techniques, and crosslinking chemistry have enabled precise control over structure and function across multiple length scales. In addition, emerging approaches such as additive manufacturing, “click” chemistry, and dynamic covalent bonding further expand the design space toward reconfigurable and sustainable materials. These materials exhibit programmable and reversible responses to heat, light, and electric or magnetic fields, enabling applications in soft actuation, adaptive optics, and dynamic surfaces. Cholesteric LCNs offer tunable optical properties via pitch modulation, which are exploited in sensors, smart windows, and mirrorless lasers. Nanoporous LCNs provide well‐defined nanoscale pathways for separation and electrochemical applications. This review highlights how molecular alignment, network formation, and processing strategies converge to define material performance and multifunctionality. Key challenges remain in achieving scalable fabrication, long‐term operational stability, and integration into real‐world devices. Nevertheless, LCNs are positioned as a versatile platform for next‐generation technologies in soft robotics, adaptive optics, and advanced membrane systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Shape‐changing multiphase microparticles from complex liquid crystal emulsions

  • Turriani, Marco
  • Parmeggiani, Camilla
  • Martella, Daniele
  • Concellón, Alberto
Complex multiphase emulsions containing liquid crystals (LCs) offer precise morphological control and dynamic tunability, enabling applications in optics, sensing, and soft matter. Here, we report a simple and scalable bulk‐emulsification strategy that circumvents the reliance on microfluidic fabrication to produce liquid crystalline network (LCN) microparticles spanning single, double (Janus), and triple emulsion morphologies within a genuinely colloidal size regime (10–20 µm). By adjusting crosslinking density and interfacial conditions, we program the LC alignment within the droplets, thereby dictating the mode and direction of actuation after photopolymerization. Single emulsions, Janus particles—coupling an active LCN hemisphere to a passive PDMS compartment—and, for the first time, triple LC emulsions—incorporating a third immiscible phase (a fluorinated oil)—are obtained via this straightforward and scalable approach. Across all morphologies, the particles exhibit robust, reversible, large‐amplitude deformations under heating, as well as chemoresponsivity through anisotropic swelling in organic solvents. In addition, the Janus particles exhibit gravitational self‐orientation, while the triple LC emulsions retain their multiphase architecture and display tunable geometries. As a proof of concept, these responsive behaviors are exploited to realize adaptive microlenses with thermally tunable focal plane and magnification, establishing complex LC emulsions as a scalable platform for multifunctional microactuators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiresponsive Isotropic Structural Color in Cholesteric Liquid Crystals

  • Vera-Arévalo, Mauricio
  • Concellón, Alberto
Cholesteric liquid crystals (CLCs) are promising photonic materials due to their tunable Bragg reflection. However, their practical implementation remains constrained by a fundamental trade-off: planar CLC films suffer from intrinsic viewing-angle dependence, whereas CLC emulsions remain restricted in responsiveness and macroscopic processability. Here, we address this limitation by developing multiresponsive CLC emulsion-based materials that generate isotropic (angle-independent) structural color through radial helical organization. A reactive CLC formulation was optimized to incorporate functional motifs responsive to temperature, chemical analytes, and light. The resulting droplets are embedded within a polymer matrix to yield mechanically robust films and printable inks that retain tunable Bragg reflection while suppressing angular color dispersion, enabling clearly discernible macroscopic coloration. These materials can be cast into molds, directly written, or brush-coated onto arbitrary substrates, allowing patterned coatings and three-dimensional architectures with preserved optical response. Across all formulations, distinct and reversible reflection-band shifts are observed under external stimuli, demonstrating that cholesteric pitch modulation is preserved under confinement. This strategy establishes polymer-embedded CLC droplets as versatile, multiresponsive photonic building blocks and offers a generalizable route toward processable, isotropic structurally colored materials capable of translating environmental inputs into accessible optical signals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liquid Crystals for Chemical and Biological Sensing: Emerging Transduction Strategies beyond Polarized Optical Microscopy

  • Gaitan, Alfonso
  • Vera-Arévalo, Mauricio
  • Concellón, Alberto
Liquid crystal (LC) sensors exploit the ability of these anisotropic soft materials to amplify molecular-scale interfacial events into macroscopic optical responses. Although classical LC sensing platforms have demonstrated high sensitivity toward chemical and biological analytes, their practical implementation remains limited by the predominance of polarized-light optical microscopy (POM), which is often qualitative, instrument-intensive, and difficult to standardize. This Spotlight examines emerging transduction strategies that move LC-based sensing beyond conventional birefringent texture analysis toward quantitative and application-relevant readouts. We first discuss classical nematic and cholesteric sensing architectures, emphasizing how interfacial anchoring, topological defects, and helical pitch modulation translate molecular interactions into optical signals. We then highlight recent approaches—including photonic and resonant optical readouts, flow cytometry, machine learning-assisted analysis, dye-doped LC systems, and dynamically reconfigurable complex LC emulsions—that convert LC ordering transitions into measurable spectral, scattering, fluorescence, absorbance, or electrical outputs. By integrating interfacial molecular recognition, LC reconfiguration, and quantitative signal generation, these advances are expanding the capabilities of LC-based sensing toward more quantitative transduction and broader compatibility with portable and automated analytical formats. Finally, we discuss remaining challenges related to reproducibility, selectivity, device integration, and scalability, and outline future opportunities for translating LC-based sensors into robust platforms for biosensing, environmental monitoring, and point-of-care diagnostics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ion Transport in Supramolecular Ionic Liquid Crystals from Imidazolium Iodides and Hyperbranched Polyesters

  • Terrel, Almudena
  • Merino, Rosa I.
  • Serrano, José Luis
  • Concellón, Alberto
Polymeric liquid crystals (LCs) are attractive platforms for electrolyte design because their self-assembled nanostructures can generate organized ion-transport pathways while preserving the processability, thermal stability, and structural integrity required for next-generation electrochemical energy-conversion and storage devices. Herein, we report a synthetically simple and modular supramolecular strategy to transform commercially available hyperbranched bis-MPA polyester-64-OH (HBG4) into nanostructured ionic LC electrolytes by combining it with imidazolium iodide ionic liquids (ILs) bearing butyl, dodecyl, or perfluorinated chains. Hydrogen-bonding interactions between the terminal hydroxyl groups of the dendritic periphery and the imidazolium cations generate supramolecular ionic dendrimers in which distinct polar, dendritic, and apolar domains coexist within a single homogeneous polymeric material. In the bulk, cooperative nanosegregation of these domains drives self-assembly into robust smectic A LC phases over a broad compositional range, with mesophase stability strongly governed by the molecular architecture of the IL. Ionic conductivity measurements reveal clear composition–nanostructure–transport relationships, with conductivity modulated by IL content, temperature, mesophase stability, and the continuity of the polar ionic domains. In particular, perfluorinated ILs promote enhanced lamellar stability through fluorophilic segregation, whereas dodecyl-substituted ILs provide the best balance between high IL loading, LC order, and ionic transport. Overall, this work establishes hyperbranched polyesters as scalable supramolecular hosts for ILs and provides a practical route toward polymeric LC electrolytes with tunable nanostructure, ion-transport properties, and enhanced structural stability for electrochemical energy-conversion and storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Antiaromatic Expanded Porphyrin Enables Redox-Tunable Photoconductivity in Columnar Liquid Crystals

  • Nguyen, Duong D.
  • Osterloh, W. Ryan
  • Concellón, Alberto
  • Sierra, Teressa
  • Labella, Jorge
  • Seki, Shu
  • Sessler, Jonathan L.
Liquid crystals (LCs) based on π-conjugated building blocks are well-established platforms for engineering soft optoelectronic materials. However, the incorporation of antiaromatic frameworks-despite their potential to unlock new functional paradigms-remains highly challenging. Herein, we report an antiaromatic expanded porphyrin that upon heating and then cooling self-assembles into a highly ordered rectangular columnar mesophase (Colr). The resulting supramolecular organization enables photo-induced charge transport in the LC state that is markedly enhanced compared to the amorphous monomeric precursor form. Reductive (n-type) and oxidative (p-type) chemical doping was found to generate stabilized open-shell radical species within the Colr assemblies and boost further their photoconductivity. The findings reported here establish antiaromatic expanded porphyrins as promising platforms for the construction of redox-responsive semiconducting soft materials.