Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-molecule conductance behavior of molecular bundles

  • Bara-Estaún, Alejandro
  • Planje, Inco J.
  • Almughathawi, Renad
  • Naghibi, Saman
  • Vezzoli, Andrea
  • Milan, David C.
  • Lambert, Colin J.
  • Martín, Santiago
  • Cea, Pilar
  • Nichols, Richard J.
  • Higgins, Simon J.
  • Yufit, Dmitry S.
  • Sangtarash, Sara
  • Davidson, Ross J.
  • Beeby, Andrew
Controlling the orientation of complex molecules in molecular junctions is crucial to their development into functional devices. To date, this has been achieved through the use of multipodal compounds (i.e., containing more than two anchoring groups), resulting in the formation of tri/tetrapodal compounds. While such compounds have greatly improved orientation control, this comes at the cost of lower surface coverage. In this study, we examine an alternative approach for generating multimodal compounds by binding multiple independent molecular wires together through metal coordination to form a molecular bundle. This was achieved by coordinating iron(II) and cobalt(II) to 5,5′-bis(methylthio)-2,2′-bipyridine (L1) and (methylenebis(4,1-phenylene))bis(1-(5-(methylthio)pyridin-2-yl)methanimine) (L2) to give two monometallic complexes, Fe-1 and Co-1, and two bimetallic helicates, Fe-2 and Co-2. Using XPS, all of the complexes were shown to bind to a gold surface in a fac fashion through three thiomethyl groups. Using single-molecule conductance and DFT calculations, each of the ligands was shown to conduct as an independent wire with no impact from the rest of the complex. These results suggest that this is a useful approach for controlling the geometry of junction formation without altering the conductance behavior of the individual molecular wires., A.B. and R.J.D. gratefully acknowledge the EPSRC (EP/K007785/1; EP/K007548/1) for funding this work. This work was supported by EPSRC under Grants EP/M005046/1 (Single-Molecule Photo-Spintronics) and EP/M029522/1 and EP/M029204/1 (Single Molecule Plasmoelectronics). S.M. and P.C. are grateful for financial assistance in the framework of the projects PID2019-105881RB-I00 and TED2021-131318B–I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through the grant E31_20R with European Social Funds (Construyendo Europa desde Aragón). R.A. is grateful for the Deanship of Scientific Research, Taibah University. S.S. acknowledges the Leverhulme Trust for Early Career Fellowship (ECF-2018-375). C.J.L. and R.N. acknowledge EPSRC support from the QMol project EP/X026876/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large area arrays of discrete single-molecule junctions derived from host-guest complexes

  • Escorihuela, Enrique
  • Barrio, Jesús del
  • Davidson, Ross J.
  • Beeby, Andrew
  • Low, Paul J.
  • Perez Murano, Francesc X.
  • Cea, Pilar
  • Martín, Santiago
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host–guest complexes of the wire-like viologen derivative 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host–guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host–guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host–guest complexes without deleterious intermolecular coupling effects., E. E. gratefully acknowledges the award of a DGA fellowship from the Government of Aragon. P. C. and S. M. are grateful for financial assistance in the framework of the projects PID2019-105881RB-I00, TED2021-131318B-I00, and PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). J. D. B acknowledges grant RYC-2015-18471, funded by MCIN/AEI/10.13039/501100011033 and by “European Social Fund Investing in your future”; and the grant CTQ2017-84087-R supported by MCIN/AEI/10.13039/501100011033, and by “European Regional Development Fund a way of making Europe” by the European Union. R. J. D. and A. B. gratefully acknowledge the EPSRC grant EP/M029204/1. P. J. L. gratefully acknowledges support for work in the area of molecular electronics from the Australian Research Council Discovery Program (DP190100073, DP190100075 and DP220100790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust large area molecular junctions based on transparent and flexible electrodes

  • García-Serrano, Aitor
  • Cea, Pilar
  • Osorio, Henrry M.
  • Perez Murano, Francesc X.
  • Rius, Gemma
  • Low, Paul J.
  • Martín, Santiago
Electrografting of an oligophenylene ethynylene monolayer (OPEH) onto a Mylar®-supported PEDOT : PSS and graphene substrate prior to wet-transfer of a graphene top-electrode has been used to create flexible and transparent large-area Mylar–PEDOT : PSS|OPEH|Graphene molecular junctions. The electrical conductance of the Mylar–PEDOT : PSS|OPEH|Graphene structure was determined by conductive probe atomic force microscopy (c-AFM), sampling various regions across the surfaces of multiple devices. All registered I–V curves (sampling size ∼150 tests) give a sigmoidal response, consistent with through molecule conductance and ruling out the presence of direct electrode contacts or short-circuits. The demonstration of the combined use of Mylar-supported PEDOT : PSS and graphene as alternative electrode materials to conventional metal thin film electrodes in large-area molecular junctions opens avenues to enable flexible and transparent molecular (opto)electronic devices., P. C. and S. M. acknowledge PID2019-105881RB-I00 (MCIN/AEI/10.13039/501100011033), PID2022-14143300B-I00 and TED2021-131318B-I00 grant funded by the MCIN/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR”. These authors also acknowledge DGA/Fondos FEDER (Construyendo Europa desde Aragón) for funding the research group Platón (E31-23R). H. M. O. is grateful for financial assistance from Escuela Politécnica Nacional in the framework of project PIGR-19-04. G. R. acknowledges her contract under the programme Ayudas Ramon y Cajal, Reference RYC-2016-21412. P. J. L. gratefully acknowledges support from the Australian Research Council (DP220100790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas-phase synthesis of iron silicide nanostructures using a single-source precursor: Comparing direct-write processing and thermal conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gràcia Tortadès, Isabel
  • Cané, Carles
  • Cea, Pilar
  • Teresa, José María de
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated., S.B. acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) in the Heisenberg Programme (BA 6595/1-1) and through grants BA 6595/2-2 and BA 6595/5-1. M.H. thanks the Deutsche Forschungsgemeinschaft for financial support through grant HU 752/16-1. D.K. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 823717-ESTEEM3. In addition, S.B. thanks Prof. A. Terfort and Prof. M. Wagner for their support at Goethe University Frankfurt. The work was also supported in part by the COST Action COST-FIT4NANO (action CA19140) by providing funding for a STSM of A.S.-P. I.G. and C.C. acknowledge funding by the Spanish Ministry of Science and Innovation via Grant PID2019-107697RB-C42 (AEI/FEDER, EU). J.M.D.T. acknowledges financial support by grant PID2020-112914RB-I00 funded by MCIN/AEI/10.13039/501100011033 and Gobierno de Aragón via grant E13_23R with European Social Funds (Construyendo Europa desde Aragón). A.S.-P. and P.C. are grateful for financial assistance in the framework of the projects PID2019-105881RB-I00 and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). This work was conducted within the Frankfurt Center for Electron Microscopy (FCEM). Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the impact of the HOMO-LUMO gap on molecular thermoelectric properties: A comparative study of conjugated aromatic, quinoidal, and donor-acceptor core systems

  • Blankevoort, Nickel
  • Bastante, Pablo
  • Davidson, Ross J.
  • Salthouse, Rebecca J.
  • Daaoub, Abdalghani
  • Cea, Pilar
  • Martín, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Sadeghi, Hatef
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO–LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor–acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules., N.B. thanks the School of Engineering, University of Warwick, studentships for Ph.D. funding. H.S. acknowledges UKRI for Future Leaders Fellowship numbers MR/S015329/2 and MR/X015181/1. S.S. acknowledges Leverhulme Trust for Early Career Fellowship no. ECF-2018-375. P.C. and S.M. are grateful for financial assistance in the framework of the projects PID2022-141433OB-I00 and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). P.B. acknowledges financial support from Spanish MICINN ref PRE2019-091388. N.A. acknowledges funding by Spanish MICINN (grant PID2020-114880GB-I00 and “Maria de Maeztu” Programme for Units of Excellence in R&D CEX2018-000805-M). N.A., R.J.D., R.J.S., and M.R.B. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He+ and Ne+ beam nanowriting from organometallic thin films: a comparison with Ga+ and e- beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • Teresa, José María de
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution., The authors are thankful for the financial support from the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, for the financial support from the grants PID2020-11223914RB-I00, PID2022-141433OB-I00 PDC2023-145810-I00, PID2023-146451OB-I00, RED2022-134096-T and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. This research work has also been funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). The authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas (LMA)” at “Universidad de Zaragoza”, and thefinancial support through a short-term scientific mission funded by the COST Action CA19140 – Focused Ion Technology for Nanomaterials, supported by COST (European Cooperation in Science and Technology) – https://www.fit4nano.eu/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in langmuir–blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José Luis
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well-organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well-organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying-flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo-cross linking, leading to the formation of a compact photo-crosslinked film. Incubation of these photo-crosslinked films in a solution containing 1-hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces., E.E., S.M., and P.C. thank PID2019-105881RB-I00 and PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as TED2021-131318B-I00 funded by MCIN/ AEI/10.13039/501100011033/ and Unión Europea NextGenerationEU/PRTR. J.L.S. and A.C. acknowledge PGC2018-097583-I00 and PID2021-122882NBI00 funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”. A.C. is grateful for grant RYC2021-031154-I funded by MICINN/AEI/FEDER/EU-NextGenerationEU. The authors also acknowledge Gobierno de Aragón–FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R) and CLIP (E47_23R). E.E. thanks the award of a DGA fellowship from the Government of Aragon and the mobility funding for international research stays. G.Z. acknowledges funding through AlmaAttrezzature from the University of Bologna. The authors would like to acknowledge the use of the SAI (UNIZAR), CEQMA (UNIZAR–CSIC) Services, and Laboratorio de Microscopias Avanzadas-LMA (UNIZAR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The conductance and thermopower behavior of pendent trans-coordinated palladium(II) complexes in single-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Al Malki, Wafa
  • Salthouse, Rebecca J.
  • Cea, Pilar
  • Martín, Santiago
  • Batsanov, Andrei S.
  • Lambert, Colin J.
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 1,2-bis(2-pyridylethynyl)benzene (bpb) palladium complexes on their electron transmission properties within gold|single-molecule|gold junctions. The ligands 2,2'-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(4-(methylthio)pyridine) (Lm ) and 6,6'-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(3-(methylthio)pyridine) (Lp ) were synthesized and coordinated with PdCl2 to give the trans-Pd(Lm or p )Cl2 complexes. X-ray photoelectron spectroscopy (XPS) measurements shed light on the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy-break junction (STM-BJ) measurements and density functional theory (DFT) calculations demonstrate that the typical lower conductance of meta- compared with para-connected isomers in a molecular junction was suppressed upon metal coordination. Simultaneously there was a modest increase in both conductance and Seebeck coefficient due to the contraction of the HOMO-LUMO gap upon metal coordination. It is shown that the low Seebeck coefficient is primarily a consequence of how the resonances shift relative to the Fermi energy., R.J.D., R.J.S., P.B., N.A., and M.R.B. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”. P.C. and S.M. thank PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and TED2021-131318B-I00 funded by MCIN/EI/10.13039/501100011033/and Unión Europea NextGenerationEU/PRTR as well as Gobierno de Aragón-FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R). C.J.L. acknowledges support from the EPSRC Programme Grant “QMol” EP/X026876/1. W.A.M. acknowledges support and computational guidance from Dr. Iain Grace. N.A. acknowledges funding from the Comunidad de Madrid NANOMAGCOST-CM (P2018/NMT-4321) and from the Spanish Ministry of Science and Innovation through grants PID2020-114880GB-I00 and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). P.B. acknowledges financial support from Spanish MICINN ref PRE2019-091388., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • Teresa, José María de
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed., The authors thank the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, the networks NANOLITO (RED2022-134096-T) and FIT4NANO (COST action CA19140), and the grants PID2020-11223914RB-I00, PID2023-146451OB-I00, PDC2023-145810-I00, PID2022-141433OB-I00, TED2021-131318B-I00 and Ayuda CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. Authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». This research work has been funded by the European Commission –NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular electronics meets direct-write carbon nanofabrication via focused electron-beam-induced deposition (FEBID): A platform for junction architecture design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • Teresa, José María de
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI/10.13039/501100011033 and UE NextGenerationEU/PRTR. J.M.D.T. and So.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., So.S., and P.C) also acknowledge support from DGA and Fondos Feder for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., So.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. P.J.L. gratefully acknowledges support from the Australian Research Council (DP220100790). R.J.N. thanks EPSRC for funding (grants EP/M029522/1, EP/M005046/1, and EP/K007785/1). C.J.L. and S.S. thank the EPSRC (grant nos. EP/M014452/1 and EP/N017188/1). H.S. acknowledges UKRI for Future Leaders Fellowships MR/S015329/2 and MR/X015181/1. S.S. acknowledges EPSRC New Investigator Grant APP17327. This work is supported by the UKRI Programme grant EP/X026876/1 “QMol”. Authors acknowledge Dr. César Magen for the EELS experiment and its interpretation. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ≪Laboratorio de Microscopias Avanzadas (LMA)≫ at ≪Universidad de Zaragoza≫., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI /10.13039/501100011033 and UE NextGenerationEU/ PRTR. J.M.D.T. and S.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., S.S., and P.C.) also acknowledge support from DGA and Fondos FEDER for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., S.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023e for Research Units, withAEI/10.13039/501100011033. A.G acknowledges the award of a DGA fellowship from the Government of Aragon. A.S.P. acknowledges funding received from project PIE202060E187 from the Spanish National Research Council (CSIC). J.M.B. acknowledges grant PID2019-105881RB-I00 and PhD Fellowship PRE2020-093409 funded by MCIU/AEI/10.13039/50110001133 and by FEDER, EU., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Single-molecule conductance behavior of molecular bundles

  • Bara-Estaún, Alejandro
  • Planje, Inco J.
  • Almughathawi, Renad
  • Naghibi, Saman
  • Vezzoli, Andrea
  • Milan, David C.
  • Lambert, Colin
  • Martin, Santiago
  • Cea, Pilar
  • Nichols, Richard J.
  • Higgins, Simon J.
  • Yufit, Dmitry S.
  • Sangtarash, Sara
  • Davidson, Ross J.
  • Beeby, Andrew
Controlling the orientation of complex molecules in molecular junctions is crucial to their development into functional devices. To date, this has been achieved through the use of multipodal compounds (i.e., containing more than two anchoring groups), resulting in the formation of tri/tetrapodal compounds. While such compounds have greatly improved orientation control, this comes at the cost of lower surface coverage. In this study, we examine an alternative approach for generating multimodal compounds by binding multiple independent molecular wires together through metal coordination to form a molecular bundle. This was achieved by coordinating iron(II) and cobalt(II) to 5,5′-bis(methylthio)-2,2′-bipyridine (L1) and (methylenebis(4,1-phenylene))bis(1-(5-(methylthio)pyridin-2-yl)methanimine) (L2) to give two monometallic complexes, Fe-1 and Co-1, and two bimetallic helicates, Fe-2 and Co-2. Using XPS, all of the complexes were shown to bind to a gold surface in a fac fashion through three thiomethyl groups. Using single-molecule conductance and DFT calculations, each of the ligands was shown to conduct as an independent wire with no impact from the rest of the complex. These results suggest that this is a useful approach for controlling the geometry of junction formation without altering the conductance behavior of the individual molecular wires.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Large area arrays of discrete single-molecule junctions derived from host–guest complexes

  • Escorihuela, Enrique
  • Barrio, Jesús del
  • Davidson, Ross J.
  • Beeby, Andrew
  • Low, Paul J.
  • Prez-Murano, Francesc
  • Cea, Pilar
  • Martin, Santiago
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host–guest complexes of the wire-like viologen derivative 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host–guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host–guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host–guest complexes without deleterious intermolecular coupling effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gas-Phase Synthesis of Iron Silicide Nanostructures Using a Single-Source Precursor: Comparing Direct-Write Processing and Thermal Conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gracia, Isabel
  • Cané, Carles
  • Cea, Pilar
  • De Teresa, José María
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring the Impact of the HOMO–LUMO Gap on Molecular Thermoelectric Properties: A Comparative Study of Conjugated Aromatic, Quinoidal, and Donor–Acceptor Core Systems

  • Blankevoort, Nickel
  • Bastante, Pablo
  • Davidson, Ross J.
  • Salthouse, Rebecca J.
  • Daaoub, Abdalghani H. S.
  • Cea, Pilar
  • Martin Solans, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Sadeghi, Hatef
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO–LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor–acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in Langmuir–Blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José L.
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Robust large area molecular junctions based on transparent and flexible electrodes

  • García-Serrano, Aitor
  • Cea, Pilar
  • Osorio, Henrry M.
  • Pérez-Murano, Francesc
  • Rius, Gemma
  • Low, Paul J.
  • Martin, Santiago
Electrografting of an oligophenylene ethynylene monolayer (OPEH) onto a Mylar®-supported PEDOT : PSS and graphene substrate prior to wet-transfer of a graphene top-electrode has been used to create flexible and transparent large-area Mylar–PEDOT : PSS|OPEH|Graphene molecular junctions. The electrical conductance of the Mylar–PEDOT : PSS|OPEH|Graphene structure was determined by conductive probe atomic force microscopy (c-AFM), sampling various regions across the surfaces of multiple devices. All registered I–V curves (sampling size ∼150 tests) give a sigmoidal response, consistent with through molecule conductance and ruling out the presence of direct electrode contacts or short-circuits. The demonstration of the combined use of Mylar-supported PEDOT : PSS and graphene as alternative electrode materials to conventional metal thin film electrodes in large-area molecular junctions opens avenues to enable flexible and transparent molecular (opto)electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The conductance and thermopower behavior of pendent trans-coordinated Palladium(II) complexes in cingle-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Al Malki, Wafa
  • Salthouse, Rebecca J.
  • Cea, Pilar
  • Martin, Santiago
  • Batsanov, Andrei S.
  • Lambert, Colin J.
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 1,2-bis(2-pyridylethynyl)benzene (bpb) palladium complexes on their electron transmission properties within gold|single-molecule|gold junctions. The ligands 2,2′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(4-(methylthio)pyridine) (Lm) and 6,6′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(3-(methylthio)pyridine) (Lp) were synthesized and coordinated with PdCl2 to give the trans-Pd(Lm or p)Cl2 complexes. X-ray photoelectron spectroscopy (XPS) measurements shed light on the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy–break junction (STM–BJ) measurements and density functional theory (DFT) calculations demonstrate that the typical lower conductance of meta- compared with para-connected isomers in a molecular junction was suppressed upon metal coordination. Simultaneously there was a modest increase in both conductance and Seebeck coefficient due to the contraction of the HOMO–LUMO gap upon metal coordination. It is shown that the low Seebeck coefficient is primarily a consequence of how the resonances shift relative to the Fermi energy
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular Electronics Meets Direct-Write Carbon Nanofabrication via Focused Electron-Beam-Induced Deposition (FEBID): A Platform for Junction Architecture Design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • de Teresa, José María
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • De Teresa, José María
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms.