Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chiral quantum optics in photonic sawtooth lattices

  • Sanchez-Burillo, E.
  • Wan, C.
  • Zueco, D.
  • Gonzalez-Tudela, A.
Chiral quantum optics has become a burgeoning field due to its potential applications in quantum networks or quantum simulation of many-body physics. Current implementations are based on the interplay between local polarization and propagation direction of light in nanophotonic structures. In this manuscript, we propose an alternative platform based on coupling quantum emitters to a photonic sawtooth lattice, a one-dimensional model with an effective flux per plaquette introduced by complex tunnelings. We study the dynamics emerging from such structured photonic bath and find the conditions to obtain quasiperfect directional emission when the emitters are resonant with the band. In addition, we find that the photons in this bath can also mediate complex emitter-emitter interactions tunable in range and phase when the emitters transition frequencies lie within a band gap. Since these effects do not rely on polarization, we propose an implementation based on circuit QED to observe this physics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: Application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche A.
  • Sangiao S.
  • Magén C.
  • Barrado M.
  • Philipp P.
  • Belotcerkovtceva D.
  • Kamalakar M.V.
  • Cea P.
  • Teresa J.M. de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 µC cm-2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ~28 nm-thick Co2(CO)8 layer on a substrate held at -100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 µO cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm-3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantum kernels to learn the phases of quantum matter

  • Sancho-Lorente, T.
  • Roman Roche, J.
  • Zueco, D.
Classical machine learning has succeeded in the prediction of both classical and quantum phases of matter. Notably, kernel methods stand out for their ability to provide interpretable results, relating the learning process with the physical order parameter explicitly. Here we exploit quantum kernels instead. They are naturally related to the fidelity, and thus it is possible to interpret the learning process with the help of quantum information tools. In particular, we use a support vector machine (with a quantum kernel) to predict and characterize second-order quantum phase transitions. We explain and understand the process of learning when the fidelity per site (rather than the fidelity) is used. The general theory is tested in the Ising chain in transverse field. We show that for small-sized systems, the algorithm gives accurate results, even when trained away from criticality. Besides, for larger sizes we confirm the success of the technique by extracting the correct critical exponent ¿. Finally, we present two algorithms, one based on fidelity and one based on the fidelity per site, to classify the phases of matter in a quantum processor.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Superconducting materials and devices grown by focused ion and electron beam induced deposition

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa, J. M. de
Since its discovery in 1911, superconductivity has represented an equally inciting and fascinating field of study in several areas of physics and materials science, ranging from its most fundamental theoretical understanding, to its practical application in different areas of engineering. The fabrication of superconducting materials can be downsized to the nanoscale by means of Focused Ion/Electron Beam Induced Deposition: nanopatterning techniques that make use of a focused beam of ions or electrons to decompose a gaseous precursor in a single step. Overcoming the need to use a resist, these approaches allow for targeted, highly-flexible nanopatterning of nanostructures with lateral resolution in the range of 10 nm to 30 nm. In this review, the fundamentals of these nanofabrication techniques are presented, followed by a literature revision on the published work that makes use of them to grow superconducting materials, the most remarkable of which are based on tungsten, niobium, molybdenum, carbon, and lead. Several examples of the application of these materials to functional devices are presented, related to the superconducting proximity effect, vortex dynamics, electric-field effect, and to the nanofabrication of Josephson junctions and nanoSQUIDs. Owing to the patterning flexibility they offer, both of these techniques represent a powerful and convenient approach towards both fundamental and applied research in superconductivity. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Superconducting W-C nanopillars fabricated by Ga+ focused ion beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • De Teresa, José María
Ga+ Focused Ion Beam Induced Deposition (FIBID) is a highly flexible, single-step nanopatterning technique that makes use of a focused beam of Ga+ ions to locally induce the decomposition of a gaseous precursor material. In combination with the W(CO)6 precursor, Ga+ FIBID is known to yield a W–C compound that is superconducting below 4.7 ​K. While most reports on Ga+ FIBID-grown W–C focus on in-plane patterning, we demonstrate here that growth along the vertical direction may also be achieved by successively stacking a series of individual patterns that get deposited on top of each other. The nanopillars obtained following this procedure reach up to 10 ​μm in height, and have an aspect ratio of around 50. They exhibit a 68% of metallic W in terms of atomic content, higher than the 40% detected in their in-plane counterparts, while maintaining the superconducting properties. This approach also opens up the possibility of tuning their height and growth angle with respect to the substrate, exhibiting potential applicability in the design of 3D superconducting devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High cooperativity coupling to nuclear spins on a circuit quantum electrodynamics architecture

  • Rollano, Victor
  • de Ory, Marina C.
  • Buch, Christian D.
  • Rubín-Osanz, Marcos
  • Zueco, David
  • Sánchez-Azqueta, Carlos
  • Chiesa, Alessandro
  • Granados, Daniel
  • Carretta, Stefano
  • Gomez, Alicia
  • Piligkos, Stergios
  • Luis, Fernando
Nuclear spins are candidates to encode qubits or qudits due to their isolation from magnetic noise and potentially long coherence times. However, their weak coupling to external stimuli makes them hard to integrate into circuit quantum electrodynamics architectures, the leading technology for solid-state quantum processors. Here, we study the coupling of 173Yb(III) nuclear spin states in an [Yb(trensal)] molecule to superconducting cavities. Experiments have been performed on magnetically dilute single crystals placed on the inductors of lumped-element LC superconducting resonators with characteristic frequencies spanning the range of nuclear and electronic spin transitions. We achieve a high cooperative coupling to all electronic and most nuclear [173Yb(trensal)] spin transitions, a necessary ingredient for the implementation of qudit protocols with molecular spins using a hybrid architecture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • de Teresa, José M.
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucia
  • Sangiao, Soraya
  • de Teresa, Jose Maria
  • Cea, Pilar
Abstract The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC·cm-2 results in the lowest resistivity reported to date for PdNDs, namely 145.1 μΩ·cm, which is only one order of magnitude higher than metallic palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effective theory for matter in non-perturbative cavity QED

  • Román-Roche, Juan
  • Zueco, David
Starting from a general material system of N particles coupled to a cavity, we use a coherent-state path integral formulation to produce a effective theory for the material degrees of freedom. We tackle the effects of image charges, the A^2 term and a multimode arbitrary-geometry cavity. The resulting (non-local) action has the photonic degrees of freedom replaced by an effective position-dependent interaction between the particles. In the large-NN limit, we discuss how the theory can be cast into an effective Hamiltonian where the cavity induced interactions are made explicit. The theory is applicable, beyond cavity QED, to any system where bulk material is linearly coupled to a diagonalizable bosonic bath. We highlight the differences of the theory with other well-known methods and numerically study its finite-size scaling on the Dicke model. Finally, we showcase its descriptive power with three examples: photon condensation, the 2D free electron gas in a cavity and the modification of magnetic interactions between molecular spins; recovering, condensing and extending some recent results in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A quantum spin liquid candidate isolated in a two-dimensional Co<sup>II</sup>Rh<sup>III</sup> bimetallic oxalate network

  • Burzurí, Enrique
  • Martínez-Pérez, María José
  • Martí-Gastaldo, Carlos
  • Evangelisti, Marco
  • Mañas-Valero, Samuel
  • Coronado, Eugenio
  • Martínez, Jesús I.
  • Galán-Mascaros, José Ramón
  • Luis, Fernando
A quantum spin liquid (QSL) is an elusive state of matter characterized by the absence of long-range magnetic order, even at zero temperature, and by the presence of exotic quasiparticle excitations. In spite of their relevance for quantum communication, topological quantum computation and the understanding of strongly correlated systems, like high-temperature superconductors, the unequivocal experimental identification of materials behaving as QSLs remains challenging. Here, we present a novel 2D heterometallic oxalate complex formed by high-spin Co(II) ions alternating with diamagnetic Rh(III) in a honeycomb lattice. This complex meets the key requirements to become a QSL: a spin ½ ground state for Co(II), determined by spin–orbit coupling and crystal field, a magnetically-frustrated triangular lattice due to the presence of antiferromagnetic correlations, strongly suppressed direct exchange interactions and the presence of equivalent interfering superexchange paths between Co centres. A combination of electronic paramagnetic resonance, specific heat and ac magnetic susceptibility measurements in a wide range of frequencies and temperatures shows the presence of strong antiferromagnetic correlations concomitant with no signs of magnetic ordering down to 15 mK. These results show that bimetallic oxalates are appealing QSL candidates as well as versatile systems to chemically fine tune key aspects of a QSL, like magnetic frustration and superexchange path geometries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • De Teresa, José María
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exact solution for quantum strong long-range models via a generalized Hubbard-Stratonovich transformation

  • Román-Roche, Juan
  • Herráiz-López, Víctor
  • Zueco, David
We present an exact analytical solution for quantum strong long-range models in the canonical ensemble by extending the classical solution proposed in Campa et al. [J. Phys. A: Math. Gen. 36, 6897 (2003)]. Specifically, we utilize the equivalence between generalized Dicke models and interacting quantum models as a generalization of the Hubbard-Stratonovich transformation. To demonstrate our method, we apply it to the Ising chain in transverse field and discuss its potential application to other models, such as the Fermi-Hubbard model, combined short- and long-range models, and models with antiferromagnetic interactions. Our findings indicate that the critical behavior of a model is independent of the range of interactions, within the strong long-range regime, and the dimensionality of the model. Moreover, we show that the order-parameter expression is equivalent to that provided by mean-field theory, thus confirming the exactness of the latter. Finally, we examine the algebraic decay of correlations and characterize its dependence on the range of interactions in the full phase diagram.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimized cross-polarized LEKIDs for W-band using sawtooth inductors

  • De Ory, Marina C.
  • Rodriguez, David
  • Villa, Enrique
  • De la Fuente, Luisa
  • Aja, Beatriz
  • Rollano, Victor
  • Magaz, María Teresa
  • Pascual, Juan P.
  • Granados, Daniel
  • Artal, Eduardo
  • Gomez, Alicia
Lumped-element kinetic inductance detectors (LEKIDs) based on sawtooth inductors for W -band are presented in this article. A careful analysis is carried out for the cross-polarization in the inductor geometry, which brings out the absorption of the nondesired E -field component of an incident wave plane. The proposed inductor geometry with sawtooth sections demonstrates improved cross-polarization. The analytical results are verified by comparison with 3-D electromagnetic (EM) simulations. As the first proof of concept, W -band optical response is demonstrated through quasioptical characterization at room temperature of an aluminum LEKID array. Moreover, a LEKID array based on bilayer superconducting titanium/aluminum (Ti/Al) thin film is developed for evaluating the performance at millikelvin temperatures. Darkness characterization confirms the high-quality factor of the fabricated detectors and the low-frequency design reliability. In addition, cryogenic optical experiments are performed for spectroscopic and detector sensitivity characterization. The proposed geometry opens the possibility of developing large-format polarimetric cameras based on on-chip LEKID structures for future astronomical experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Scanning spin probe based on magnonic vortex quantum cavities

  • González-Gutiérrez, Carlos A.
  • García-Pons, David
  • Zueco, David
  • Martínez-Pérez, María José
Performing nanoscale scanning electron paramagnetic resonance (EPR) requires three essential ingredients: First, a static magnetic field together with field gradients to Zeeman split the electronic energy levels with spatial resolution; second, a radio frequency (rf) magnetic field capable of inducing spin transitions; finally, a sensitive detection method to quantify the energy absorbed by spins. This is usually achieved by combining externally applied magnetic fields with inductive coils or cavities, fluorescent defects, or scanning probes. Here, we theoretically propose the realization of an EPR scanning sensor merging all three characteristics into a single device: the vortex core stabilized in ferromagnetic thin-film discs. On one hand, the vortex ground state generates a significant static magnetic field and field gradients. On the other hand, the precessional motion of the vortex core around its equilibrium position produces a circularly polarized oscillating magnetic field, which is enough to produce spin transitions. Finally, the spin–magnon coupling broadens the vortex gyrotropic frequency, suggesting a direct measure of the presence of unpaired electrons. Moreover, the vortex core can be displaced by simply using external magnetic fields of a few mT, enabling EPR scanning microscopy with large spatial resolution. Our numerical simulations show that, by using low damping magnets, it is theoretically possible to detect single spins located on the disc’s surface. Vortex nanocavities could also attain strong coupling to individual spin molecular qubits with potential applications to mediate qubit–qubit interactions or to implement qubit readout protocols.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Localized nanoscale formation of vanadyl porphyrin 2D MOF nanosheets and their optimal coupling to lumped element superconducting resonators

  • Gimeno, Ignacio
  • Luis, Fernando
  • Marcuello, Carlos
  • Pallarés, Maria Carmen
  • Lostao, Anabel
  • Calero de Ory, Marina
  • Gomez, Alicia
  • Granados, Daniel
  • Tejedor, Inés
  • Natividad, Eva
  • Urtizberea, Ainhoa
  • Roubeau, Olivier
A strategy toward the realization of a quantum spin processor involves the coupling of spin qubits and qudits to photons within superconducting resonators. To enable the realization of such hybrid architecture, here we first explore the design of a chip with multiple lumped-element LC superconducting resonators optimized for their coupling to distinct transitions of a vanadyl porphyrin electronuclear qudit. The controlled integration of the vanadyl qudit onto the superconducting device, both in terms of number and orientation, is then attained using the in situ formation of nanosheets of a 2D framework built on the vanadyl qudit as a node. Low-temperature transmission experiments demonstrate the coupling of photons in resonators with different frequencies to the targeted electronuclear transitions of the vanadyl qudit, also confirming the control over the vanadyl qudit node orientation. The derived collective spin-photon couplings in the 0.3–1.6 MHz range then allow to estimate enhanced, optimal, single spin photon couplings up to 4 Hz.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Folding and Functionalizing DNA Origami: A Versatile Approach Using a Reactive Polyamine

  • Postigo, Alejandro
  • Marcuello, Carlos
  • Verstraeten, William
  • Sarasa, Santiago
  • Walther, Tobias
  • Lostao, Anabel
  • Göpfrich, Kerstin
  • Barrio, Jesús del
  • Hernández-Ainsa, Silvia
DNA nanotechnology is a powerful synthetic approach to crafting diverse nanostructures through self-assembly. Chemical decoration of such nanostructures is often required to tailor their properties for specific applications. In this Letter, we introduce a pioneering method to direct the assembly and enable the functionalization of DNA nanostructures using an azide-bearing functional polyamine. We first demonstrate the successful polyamine-assisted folding of a scaffolded DNA origami nanostructure equipped with reactive azide groups. Leveraging this reactivity, we next showcase the decoration of the DNA origami via strain-promoted azide–alkyne cycloaddition with dibenzocyclooctyne-containing functional molecules. Specifically, we incorporate a fluorophore (Cy5), polyethylene glycol (PEG), and a hydrophobic phosphatidylethanolamine (PE) tag to tailor the properties of our DNA origami nanostructures. Our approach is expected to streamline and reduce the cost of chemical customization of intricate DNA nanostructures, paving the way for enhanced versatility and applicability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimal control of spin qudits subject to decoherence using amplitude-and-frequency-constrained pulses

  • Hernández-Antón, Alonso
  • Luis, Fernando
  • Castro, Alberto
Quantum optimal control theory (QOCT) can be used to design the shape of electromagnetic pulses that implement operations on quantum devices. By using non-trivially shaped waveforms, gates can be made significantly faster than those built by concatenating monochromatic pulses. Recently, we applied this idea to the control of molecular spin qudits modeled with Schrödinger’s equation and showed it can speed up operations, helping mitigate the effects of decoherence (Castro et al 2022 Phys. Rev. Appl. 17 064028). However, short gate times require large optimal pulse amplitudes, which may not be experimentally accessible. Introducing bounds to the amplitudes then unavoidably leads to longer operation times, for which decoherence can no longer be neglected. Here, we study how to improve this procedure by applying QOCT on top of Lindblad’s equation, to design control pulses accounting for decoherence already in the optimization process. We define the control signal in terms of generic parameters, which permits the introduction of bounds and constraints. This is convenient, as amplitude and frequency limitations are inherent to waveform generators. The pulses that we obtain consistently enhance operation fidelities compared to those achieved with the optimization based on Schrödinger’s equation, demonstrating the flexibility and robustness of our method. The improvement is larger the shorter the spin coherence time T2
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A genetic algorithm to generate maximally orthogonal frames in complex space

  • Roca-Jerat, Sebastián
  • Román-Roche, Juan
A frame is a generalization of a basis of a vector space to a redundant overspanning set whose vectors are linearly dependent. Frames find applications in signal processing and quantum information theory. We present a genetic algorithm that can generate maximally orthogonal frames (MOFs) of arbitrary size n in d-dimensional complex space. First, we formalize the concept of MOF and demonstrate that it depends on the choice of an energy function to weigh the different pairwise overlaps between vectors. Then, we discuss the relation between different energy functions and well-known frame varieties such as tight and Grassmannian frames and complex projective p-designs. Obtaining MOFs poses a global non-convex minimization problem. We discuss the relation with established numerical problems such as the Thomson problem and the problem of finding optimal packings in complex projective space. To tackle the minimization, we design a hybrid genetic algorithm that features local optimization of the parents. To assess the performance of the algorithm, we propose two visualization techniques that allow us to analyze the coherence and uniformity of high-dimensional frames. The genetic algorithm is able to produce highly-symmetric universal frames, such as equiangular tight frames, symmetric, informationally complete, positive operator-valued measurements and maximal sets of mutually unbiased bases, for configurations of up to d = 6 and n = 36, with runtimes of the order of several minutes on a regular desktop computer for the largest configurations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mumax3-cQED: An extension of Mumax3 to simulate magnon-photon interactions in cavity QED

  • Martínez-Losa del Rincón, Sergio
  • Román-Roche, Juan
  • García-Pons, David
  • Martín-Megino, Andrés
  • Zueco, David
  • Martínez-Pérez, María José
We present Mumax3-cQED, a code for modeling magnon–polaritons in realistic experimental settings. It is an extension of the widely used micromagnetic simulation package Mumax3, building on its GPU-accelerated implementation. To our knowledge, Mumax3-cQED is the first numerical framework that enables the self-consistent simulation of hybrid cavity–ferromagnet dynamics at the micromagnetic level within a single model, without treating the cavity and magnetic subsystems separately. We validate the implementation by benchmarking against numerical and analytical results from the Dicke model in both the paramagnetic and superradiant phases. Mumax3-cQED accurately captures non-equilibrium dynamics and relaxation toward equilibrium. The code also enables the straightforward calculation of hybrid magnon–photon polaritons, as demonstrated by quantitative agreement with experimental observations. Finally, we highlight the potential of Mumax3-cQED for designing magnon–cavity experiments, particularly in scenarios involving strongly inhomogeneous cavity fields or complex magnetization configurations. The software is open-source and provides a versatile tool for studying microscopic saturated ferromagnets as well as spin textures, including domain walls, vortices, and skyrmions.