Pasar al contenido principal

APROVECHAMIENTO DE BIOMASA Y PRODUCCION SOSTENIBLE DE ENERGIA MEDIANTE (FOTO)CATALIZADORES Y REACTORES ESTRUCTURADOS BASADOS EN MATERIALES CARBONOSOS

ENE2017-82451-C3-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Influence of {111} nanofaceting on the dynamics of CO adsorption and oxidation over Au supported on CeO2 nanocubes: An operando DRIFT insight

  • Fernández García, Susana
  • Collins, Sebastián
  • Tinoco Rivas, Miguel
  • Hungría, Ana Belén
  • Calvino, José Juan
  • Cauqui, Miguel Ángel
  • Xiaowei Chen
CO adsorption and further reaction with O2 on two Au/CeO2 model systems have been investigated by operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) in order to unveil the active sites for CO oxidation. One of the ceria supports was constituted by crystallites depicting a nanocube shape bounded mostly by {100} planes, whilst the second one was consisted of nanocubes whose {110} surfaces were reconstructed into {111}-nanofacets with a zig-zag shape. The deconvolution of the CO adsorption bands and a detailed analysis of the time-evolution of these bands were also carried out. These studies evidenced a fast adsorption of CO over Au° and then Auδ--CO bands appeared during exposure to CO, in parallel with the appearance of Ce3+ features. Such changes suggest that CO adsorption process starts on Au sites on the low coordinated sites of the surface of the Au nanoparticles and their transfer to the interface sites. By comparing the nanostructure of the two catalysts, the Auδ--CO species could be fruitfully related to CO adsorption on sites located at the Au||CeO2 perimeter. The sample containing gold nanoparticles dispersed over the {111}-nanofaceted CeO2 nanocubes, which retained a higher amount of gold nanoparticles, depicts higher contribution of Auδ−−CO bands than the other Au catalyst in the DRIFT spectra. The dynamic DRIFT study clearly revealed that the CO species adsorbed on Auδ- sites were the most reactive ones in both gold supported systems for CO oxidation. This explains much higher TOF values observed on the catalyst prepared on the surface reconstructed support. A detailed analysis on the reactivity was performed by modulation excitation spectroscopy (MES). The presence of peroxide surface species (O2 2-) in nanofaceted {111} could lead to higher catalytic activity than that of gold on the non-reconstructed catalyst..
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Coordination of H2O2 on praseodymia nanorods and its application in sensing cholesterol

  • Jiang, Lei
  • Zhong, Junjie
  • Li, Youxun
  • Liu, Hanyun
  • Zhang, Shuyuan
  • Zhu, Xiudong
  • Liu, Zhibin
  • Chen, Yuxue
  • Fernández García, Susana
  • Chen, Xiaowei
The advancement of functional nanomaterials has promoted the development of biomarker sensors underpinning promising analytical tools for a range of bioanalytes such as cholesterol. In this work, we established a light-on fluorescent probe for cholesterol in human serum by coordination of H2O2 on the surface of praseodymia nanorods (Pr6O11 NRs). The distinctive interactions of various nucleotides and H2O2 with praseodymia were examined, whereby good fluorescent quenching and recovery capability were observed. A highly sensitive and selective cholesterol detection was achieved in serum samples with a detection limit of 0.1 mu M and recovery of 97.2-101.3%, respectively, due to the high oxygen mobility of praseodymia. The result suggests strong potential for work towards a key probe for a portable clinical test system for cholesterol as well as other H2O2-deriving biomarkers, potentially addressing the ever-increasing demand for the prevention of cardiovascular disease. (C) 2022 Vietnam National University, Hanoi. Published by Elsevier B.V., This work was supported by the Natural Science Foundation of Shandong Province (Grant ZR2017LB028) , Key R&D Program of Shandong Province (Grant 2018GSF118032) , and Fundamental Research Funds for the Central Universities (Grant 18CX02125A) in China. The project with reference number of ENE2017-82451-C3-2-R from Ministry of Science, Innovation and Universities of Spain is also acknowledged. This work has been co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia with reference number of FEDER-UCA18-107316.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Size, nanostructure, and composition dependence of bimetallic Au–Pd supported on ceria–zirconia mixed oxide catalysts for selective oxidation of benzyl alcohol

  • Olmos, Carol
  • Chinchilla Reyes, Lidia Esther
  • Villa, Alberto
  • Delgado Jaén, Juan José
  • Hungría Hernández, Ana Belén
  • Blanco Montilla, Ginesa
  • Prati, Laura
  • Calvino Gámez, José Juan
  • Chen, Xiaowei
A bimetallic Au–Pd catalyst supported on ceria–zirconia with Au:Pd molar ratio 0.8 has been synthesized using a simultaneous deposition–precipitation method and oxidized at 250, 450, and 700 °C in order to modify its particle size, nanostructure, and composition. Combined X-ray energy dispersive spectroscopy (XEDS)and X-ray photoelectron spectroscopy (XPS)analysis clearly evidence that the bimetallic Au–Pd catalyst oxidized at 250 °C is made up of a mixture of monometallic Au and Pd and bimetallic Au–Pd nanoparticles with Au:Pd ratios varying over a wide range. Increasing oxidation temperature leads to a stronger interaction between Au and Pd. Meanwhile, a slight increase of particle size and a narrowing of the Au:Pd ratio in the bimetallic nanoparticles take place. Compared with titania and activated carbon supports, the resistance against sintering at high temperatures of Au–Pd metal particles supported on ceria–zirconia is proven to be higher. A synergistic effect has been observed for selective oxidation of benzyl alcohol on these catalysts. The catalytic activity decreases only slightly after oxidation at 450 °C. However, oxidation at 700 °C results in much lower catalytic activity. Migration of Pd onto Au particles during oxidation of benzyl alcohol enhances the catalytic activity of a physical mixture of monometallic Au and Pd supported on ceria–zirconia catalysts. This fact, jointly with an analysis of the intrinsic activity, reveals the influence of the actual nature of Au–Pd interactions in the bimetallic particles, which points to higher activity of Au@Pd or AuPd@Pd nanostructures on ceria–zirconia supports
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Photocatalytic TiO2 nanosheets-SiO2 coatings on concrete and limestone: An enhancement of de-polluting and self-cleaning properties by nanoparticle design

  • Luna Aguilera, Manuel Jesús
  • Delgado Jaén, Juan José
  • Romero Ocaña, Ismael
  • Montini, T.
  • Gil Montero, María Luisa Almoraima
  • Martínez López, Francisco Javier
  • Fornasiero, P.
  • Mosquera Díaz, María Jesús
In this study, we develop TiO2-SiO2 nanocomposites that can be employed as photoactive coatings to create surfaces with antipollution and self-cleaning properties in urban buildings. In particular, anatase titanium dioxide with a high percentage of {001} facets, commonly called titania nanosheet (TNS), was used as active phase. This approach allows us to improve the antipollution properties of similar sols based on P25. The obtained TNS were intensively characterized by UV–Vis diffuse reflectance absorption, X-Ray diffraction and transmission electron microscopy to rationalize the sol synthesis and fully understand the photocatalytic performances. Our results clearly show that after treating the titania nanosheets with NaOH to remove adsorbed residual fluoride from the synthesis, they can be easily dispersed and the photocatalytic activity is dramatically improved. This material has been shown to effectively reduce concentrations of NOx, soot and organic dyes under simulated sun light radiation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Enhanced Artificial Enzyme Activities on the Reconstructed Sawtoothlike Nanofacets of Pure and Pr-Doped Ceria Nanocubes

  • Jiang, Lei
  • Tinoco Rivas, Miguel
  • Fernández García, Susana
  • Sun, Yujiao
  • Traviankina, Mariia
  • Nan, Pengli
  • Xue, Qi
  • Pan, Huiyan
  • Aguinaco Martín, Almudena
  • González Leal, Juan María
  • Blanco Montilla, Ginesa
  • Blanco Ollero, Eduardo
  • Hungría Hernández, Ana Belén
  • Calvino Gámez, José Juan
  • Chen, Xiaowei
In this work, a simple one-step thermal oxidation process was established to achieve a significant surface increase in {110} and {111} nanofacets on well-defined, pure and Pr-doped, ceria nanocubes. More importantly, without changing most of the bulk properties, this treatment leads to a remarkable boost of their enzymatic activities: from the oxidant (oxidase-like) to antioxidant (hydroxyl radical scavenging) as well as the paraoxon degradation (phosphatase-like) activities. Such performance improvement might be due to the thermally generated sawtoothlike {111} nanofacets and defects, which facilitate the oxygen mobility and the formation of oxygen vacancies on the surface. Finally, possible mechanisms of nanoceria as artificial enzymes have been proposed in this manuscript. Considering the potential application of ceria as artificial enzymes, this thermal treatment may enable the future design of highly efficient nanozymes without changing the bulk composition., This work has been supported by the Ministry of Science, Innovation and Universities of Spain with Reference Numbers of ENE2017-82451-C3-2-R, MAT2016-81118-P and MAT2017-87579-R. The research projects funded by the Natural Science Foundation of Shandong Province (Grant ZR2017LB028), Key R&D Program of Shandong Province (Grant 2018GSF118032), and Fundamental Research Funds for the Central Universities (Grant 18CX02125A) in China are also acknowledged. TEM/STEM data were obtained at DMEUCA node of the Spanish Unique Scientific and Technological Infrastructure (ICTS) of Electron Microscopy of Materials ELECMIM. M. Tinoco thanks the FPU Scholarship Program (Grant AP2010-3737) from Ministry of Education of Spain. H. Pan is grateful for financial support (Grant 201406140130) from the Chinese Scholarship Council to accomplish her Ph.D. study at the University of Cadiz (Spain). J. M. Gonzalez, G. Blanco, and X. Chen are also grateful for the financial support from the joint project (Proyectos Integradores, Grant PI20201) in IMEYMAT of the University of Cadiz.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Spectroscopic Ellipsometry Study on Tuning the Electrical and Optical Properties of Zr-Doped ZnO Thin Films Grown by Atomic Layer Deposition

  • Bohórquez, Carolina
  • Bakkali, Hicham
  • Delgado Jaén, Juan José
  • Blanco Ollero, Eduardo
  • Herrera, Manuel
  • Domínguez de la Vega, Manuel
This work reports the ellipsometry analysis of atomic layer deposition (ALD) films of ZnO doped with Zr to determine parameters like free carrier concentration and mobility. Thin films of zinc oxide (ZnO) and Zr-doped ZnO of thickness similar to 100 nm were prepared by atomic layer deposition on sapphire, SiO2/Si(100), and Si(100) substrates. Variable-angle spectroscopic ellipsometry was used to study their optical properties in the 0.5-3.5 eV spectral range. The optical constants were accurately obtained using a model that combines Drude and Tauc-Lorentz oscillators with Bruggeman effective medium approximations, allowing the inclusion of a roughness layer in the optical model. The effect of Zr doping (ca. 1.9- 4.4 atom %) was then investigated in both as- prepared samples and samples annealed in the temperature range of 100-300 degrees C. All of the films exhibited good optical transparency (ca. 70-90% in the visible region). For doping levels below 2.7 atom %, the real part of the dielectric permittivity reveals a semiconductor-to-metal transition in the near-infrared (NIR) region, as the permittivity goes from positive to negative. Besides, the plasma energy increases with increasing Zr concentration, and both resistivity and carrier concentration exhibit slightly parabolic behaviors, with a minimum of similar to 1.5 x 10(-3) Omega cm and a maximum of 2.4 x 10(20) cm(-3), respectively, at the same critical Zr concentration (2.7 atom %). In contrast, the carrier mobility decreases rapidly from 76.0 to 19.2 cm(2)/(V s) with increasing Zr content, while conductivities and carrier mobilities worsen when the annealing temperature increases, probably due to the segregation of ZnO crystals. Finally, the optical band gap is very stable, revealing its interesting independence of substrate composition and annealing temperature, as it collapses to a single master curve when band gap energy is plotted versus free carrier concentration, following the Burstein-Moss effect. Overall, the Zr-doped ZnO films studied here would be a highly desirable system for developing thermally stable transparent conductive oxides (TCOs).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Exceptional Low-Temperature CO Oxidation over Noble-Metal-Free Iron-Doped Hollandites: An In-Depth Analysis of the Influence of the Defect Structure on Catalytic Performance

  • Gómez-Recio, Isabel
  • Pan, Huiyan
  • Azor-Lafarga, Alberto
  • Ruiz-González, María Luisa
  • Hernando, María
  • Parras, Marina
  • Fernández-Díaz, María Teresa
  • Delgado Jaén, Juan José
  • Chen, Xiaowei
  • Goma Jiménez, Daniel
  • Portehault, David
  • Sanchez, Clément
  • Cabero, Mariona
  • Martínez-Arias, A.
  • González-Calbet, José M.
  • Calvino Gámez, José Juan
A family of iron-doped manganese-related hollandites, KxMn1−yFeyO2−δ (0 ≤ y ≤ 0.15), with high performance in CO oxidation have been prepared. Among them, the most active catalyst, K0.11Mn0.876Fe0.123O1.80(OH)0.09, is able to oxidize more than 50% of CO at room temperature. Detailed compositional and structural characterization studies, using a wide battery of thermogravimetric, spectroscopic, and diffractometric techniques, both at macroscopic and microscopic levels, have provided essential information about this never-reported behavior, which relates to the oxidation state of manganese. Neutron diffraction studies evidence that the above compound stabilizes hydroxyl groups at the midpoints of the tunnel edges as in isostructural β- FeOOH. The presence of oxygen and hydroxyl species at the anion sublattice and Mn3+, confirmed by electron energy loss spectroscopy, appears to play a key role in the catalytic activity of this doped hollandite oxide. The analysis of these detailed structural features has allowed us to point out the key role of both OH groups and Mn3+ content in these materials, which are able to effectively transform CO without involving any critical, noble metal in the catalyst formulation., This work was supported by FEDER/Spanish Ministry of Science and Innovation through Research Projects MAT2017- 87579-R, MAT2017-82252-R, RTI2018-101604-B-I00, MCIN/AEI/10.13039/501100011033, Project PID2020- 113006-RB-I00, and ENE2017-82451-C3-2-R. The authors acknowledge the National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) for provision of corrected aberration microscopy.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A facile one-pot hydrothermal synthesis as an efficient method to modulate the potassium content of cryptomelane and its effects on the redox and catalytic properties

  • Pan, Huiyan
  • Chen, Xiaowei
  • Sanz, Oihane
  • Cauqui López, Miguel Ángel
  • Rodríguez-Izquierdo Gil, José María
  • Delgado Jaén, Juan José
Cryptomelane has been widely applied as catalyst in oxidation reactions due to its excellent redox properties and low cost. Here, a novel one-pot hydrothermal synthesis using a potassium permanganate aqueous solution as precursor and ethanol as reducing agent has successfully been developed to obtain cryptomelane nano-oxides. This synthetic route makes it possible to control the amount of potassium incorporated into the structure of the cryptomelane by selecting the appropriate synthesis temperature and ethanol initial concentration. Taking advantage of this approach, the effect of potassium concentration on the structural stability and reducibility of the cryptomelane, which are poorly discussed in the literature, has been studied. We have observed that samples with low content of potassium (~11%) show high conversions of CO to CO2 especially at low temperatures. The lower activity of the samples with high K contents (~16%) can be ascribed to the beneficial effect of K on the structural stability of cryptomelane in detriment of labile oxygen on cryptomelane surface.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active Ce- and Mg-promoted Ni catalysts supported on cellulose-derived carbon for low-temperature CO2 methanation

  • Tarifa, Pilar
  • Megías-Sayago, Cristina
  • Cazaña, Fernando
  • González-Martín, Miguel
  • Latorre, Nieves
  • Romeo, Eva
  • Delgado, Juan José
  • Monzón, Antonio
The CO2 methanation performance of Mg- and/or Ce-promoted Ni catalysts supported on cellulose-derived carbon (CDC) was investigated. The samples, prepared by biomorphic mineralization techniques, exhibit pore distributions correlated to the particle sizes, revealing a direct effect of the metal content in the textural properties of the samples. The catalytic performance, evaluated as CO2 conversion and CH4 selectivity, reveals that Ce is a better promoter than Mg, reaching higher conversion values in all of the studied temperature range (150–500 °C). In the interval of 350–400 °C, Ni–Mg–Ce/CDC attains the maximum yield to methane, 80%, reaching near 100% CH4 selectivity. Ce-promoted catalysts were highly active at low temperatures (175 °C), achieving 54% CO2 conversion with near 100% CH4 selectivity. Furthermore, the large potential stability of the Ni–Mg–Ce/CDC catalyst during consecutive cycles of reaction opens a promising route for the optimization of the Sabatier process using this type of catalyst., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MICINN, Madrid, Spain, Grant ENE2013-44350R) and MICINN–FEDER (Project ENE2017-82451-C3). Pilar Tarifa acknowledges financial support from the MICINN (Contract BES-2014-069010). Cristina Megías-Sayago acknowledges financial support from the MICINN “Juan de la Cierva Formación” Fellowship (FJC2018-037162-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective synthesis of carbon nanotubes by catalytic decomposition of methane using Co-Cu/cellulose derived carbon catalysts: A comprehensive kinetic study

  • Henao, Wilson
  • Cazaña, Fernando
  • Tarifa, Pilar
  • Romeo, Eva
  • Latorre, Nieves
  • Sebastián, Víctor
  • Delgado, Juan José
  • Monzón, Antonio
Determination of the optimal operating conditions for large-scale production of carbonaceous nanomaterials (CNTs), mainly carbon nanotubes (CNTs) but also graphene-related materials (GRMs), remains as a major industrial and scientific challenge. For this purpose, our group is conducting an extensive study to evaluate the effect of the reaction conditions and catalyst compositions on the productivity and selectivity to different carbonaceous nanomaterials. In the case of Co-based catalysts, we have found that the promotion with Cu or Mn has a dramatic effect on the type of carbon nanomaterials synthesized. Thus, the presence of Cu promotes the growth of CNTs, while Mn favors the formation of two-dimensional GRMs. In this context, we present here a comprehensive study of the CNTs growth via catalytic decomposition of methane using a Co-Cu/cellulose derived carbon catalyst. The influence of the reaction temperature (650–950 °C) and feed composition (7.1%–42.9% of CH4 and H2) on the yield and CNTs quality was evaluated. A transition in the characteristics of the carbonaceous nanomaterial growth was observed at about 800 °C. Below this temperature, the reaction was selective towards the formation of CNTs, while above 800 °C, the obtained nanomaterial exhibited a graphite-like morphology. In addition, the catalyst deactivation was quite low in the CNTs growth regime, attaining high productivity under 11 h of operation. The model used to study the kinetics of carbon formation allowed understanding the most influential variables in the growth process, revealing the existence of a transition temperature at which there is a change in the preferential path for the formation of CNTs or GRMs. After exploring a large set of reaction conditions, the best operating parameters for growing CNTs with high productivity (0.29 gC/gcat∙h) and quality (ID/IG = 1.10, I2D/IG = 0.13) were found at 750 °C under 28.6% CH4:14.3% H2:57.1% N2., The authors acknowledge financial support from the Ministry of Science and Innovation (Madrid, Spain), Projects ENE2017-82451-C3-1-R and ENE2017-82451-C3-2-R. W. Henao acknowledges the financial support from Fundación Carolina (Madrid, Spain) and the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of AISI 316L-stainless steel foams towards the formation of graphene related nanomaterials by catalytic decomposition of methane at high temperature

  • Cazaña, Fernando
  • Latorre, Nieves
  • Tarifa, Pilar
  • Royo, Carlos J.
  • Sebastián, Víctor
  • Romeo, Eva
  • Centeno, Miguel Ángel
  • Monzón, Antonio
This work explores the preparation of graphene-related materials (GRMs) grown on stainless steel foams via catalytic decomposition of methane (CDM). The main active phases for the reaction are the Fe nanoparticles segregated from the stainless-steel after the activation stage of the foam. The effect of the feed composition and reaction temperature has been studied in order to maximize the productivity, stability and selectivity to GRMs. The maximum productivity attained was 0.116 gC/gfoam h operating at 950 °C with a feed ratio of CH4/H2 = 3 (42.9 %CH4:14.3 %H2). The carbonaceous nanomaterials (CNMs) obtained were characterized by X-Ray diffraction, Raman spectroscopy and by transmission and scanning electron microscopy. The parameters of the kinetic model developed are directly related to the relevant stages of the process, including carburization, diffusion-precipitation and deactivation-regeneration. The balance among these sequential stages determines the overall performance of the activated foam. In conditions of rapid carburization of the Fe NPs (pCH4 > 14 %), the productivity to CNMs is favoured, avoiding an initial deactivation of the active sites by fouling with amorphous carbon. After a rapid carburization, the selectivity to the different CNMs is governed by the ratio CH4/H2, and mainly by the temperature. Thus, the formation of GRMs, mainly Few Layer Graphene (FLG) and even graphene, is favoured at temperatures above 900 °C. At lower temperatures, carbon nanotubes are formed., The authors acknowledge financial support from MICINN (Madrid, Spain) FEDER, Project ENE2017-82451-C3. P. Tarifa acknowledges the grant of MICINN (Ref.: BES-2014-069010)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective synthesis of carbon nanotubes by catalytic decomposition of methane using Co-Cu/cellulose derived carbon catalysts: A comprehensive kinetic study

  • Henao, W.
  • Cazaña, F.
  • Tarifa, P.
  • Romeo, E.
  • Latorre, N.
  • Sebastian, V.
  • Delgado, J.J.
  • Monzón, A.
Determination of the optimal operating conditions for large-scale production of carbonaceous nanomaterials (CNTs), mainly carbon nanotubes (CNTs) but also graphene-related materials (GRMs), remains as a major industrial and scientific challenge. For this purpose, our group is conducting an extensive study to evaluate the effect of the reaction conditions and catalyst compositions on the productivity and selectivity to different carbonaceous nanomaterials. In the case of Co-based catalysts, we have found that the promotion with Cu or Mn has a dramatic effect on the type of carbon nanomaterials synthesized. Thus, the presence of Cu promotes the growth of CNTs, while Mn favors the formation of two-dimensional GRMs. In this context, we present here a comprehensive study of the CNTs growth via catalytic decomposition of methane using a Co-Cu/cellulose derived carbon catalyst. The influence of the reaction temperature (650–950 °C) and feed composition (7.1%–42.9% of CH4 and H2) on the yield and CNTs quality was evaluated. A transition in the characteristics of the carbonaceous nanomaterial growth was observed at about 800 °C. Below this temperature, the reaction was selective towards the formation of CNTs, while above 800 °C, the obtained nanomaterial exhibited a graphite-like morphology. In addition, the catalyst deactivation was quite low in the CNTs growth regime, attaining high productivity under 11 h of operation. The model used to study the kinetics of carbon formation allowed understanding the most influential variables in the growth process, revealing the existence of a transition temperature at which there is a change in the preferential path for the formation of CNTs or GRMs. After exploring a large set of reaction conditions, the best operating parameters for growing CNTs with high productivity (0.29 gC/gcat·h) and quality (ID/IG = 1.10, I2D/IG = 0.13) were found at 750 °C under 28.6% CH4:14.3% H2:57.1% N2.