Pasar al contenido principal

MATERIALES 2D PARA APLICACIONES ELECTROQUIMICAS EN EL ALMACENAMIENTO Y CONVERSION DE ENERGIA

PID2022-137566OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid electrochemical readout of alkaline phosphatase activity and phosphate inhibition in silica films

  • Sáenz-Espinar, MJ
  • Montilla, Francisco
  • Mateo, C. Reyes
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] This work introduces a bioelectrochemical platform for the rapid electrochemical readout of alkaline phosphatase (ALP) activity based on enzyme entrapment within sol¿gel silica films deposited on glassy carbon electrodes. Fluorescence spectroscopy confirms that immobilization preserves the structural integrity of the enzyme while creating a confined microenvironment within the silica matrix. Electrochemical experiments show that the enzymatic hydrolysis of hydroquinone diphosphate generates hydroquinone inside the film, which is detected voltammetrically at the electrode surface. The steady-state oxidation current provides a direct electrochemical readout of the enzymatic reaction rate, allowing the system response to be described using a modified Michaelis¿Menten framework in the presence of phosphate as a competitive inhibitor. The estimated activity should be regarded as an apparent specific activity of the immobilized ALP, reflecting the fraction of enzyme effectively contributing to substrate conversion and electrochemical product detection within the silica-film/ electrode. An apparent inhibition constant of 3.64 mM was obtained, in good agreement with reported values for ALP in solution, indicating that the film architecture largely preserves the native enzyme¿inhibitor interaction. The use of glassy carbon electrodes enables repeated measurements in different solutions using the same biofunctionalized electrode, providing a practical advantage over disposable screen-printed electrode configurations previously employed for ALP-based inhibition assays., Authors would like to thank the Spanish Ministerio de Ciencia e Innovacion (MICIU/AEI/ 10.13039/501100011033) for financial support of PID2022-138507OB-I00 and PID2022-137566OB-I00 grants, and Generalitat Valenciana (CIPROM/2021/62 project)
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking synergistic performance of bimetallic Gold/Copper nanoparticles-based electrochemical immunosensors for highly sensitive detection of prostate-specific antigen

  • Adeyemi, Marian
  • Quintero-Jaime, Andrés Felipe
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This study explores the viability of bimetallic nanoparticles based on gold and copper as transducer and immobilisation support for the development of a label-free electrochemical immunosensor platform using ferrocene (Fc) as redox probe. By controlling the metal precursors ratio in the synthesis process, the bimetallic nanoparticles (AuCuNPs) developed characteristic redox processes associated to the formation of bimetallic compounds, as well as an enhanced chemical interaction with the redox species, higher electrochemical surface area, and faster electron-transfer kinetics up to 2.8 times. Thiols interaction with the AuCuNPs, used as immobilisation strategy of the capture antibodies, shows changes in the characteristic redox processes of copper in the bimetallic systems as well as the electron-transfer kinetics of the redox probe. Upon detection of the prostate-specific antigen (PSA), the steric hindrance effects, produced by the formation of the antibody-antigen immunocomplexes, generates a decrease in the current density associated with Fc oxidation, achieving a 16-fold increase in the sensitivity values towards PSA detection (0.21 mA cm−2/ng mL−1) for the AuCuNPs-80/20, in comparison with the Au monometallic system 0.034 mA cm−2/ng mL−1, allowing the indirect detection of the non-electroactive PSA-antigen in a linear range 2 to 20 pg mL−1 of PSA. Our results demonstrate that by controlling the chemical composition of the bimetallic AuCu system, it is possible to remarkably improve the sensing performance parameters of the electrochemical biosensor such as sensitivity and linearity toward the PSA target, through the synergistic effects between both metals, providing a suitable point-of-care platform for the cancer biomarker detection.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unveiling graphite anodic expansion: Insights from electrochemical techniques, mass spectrometry, and kinetic modelling

  • Calabuig-Mompó, Samuel
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Calabuig-Mompó, Samuel|||/items/db46af8e-bf8f-4b95-8580-7d71d4255b55
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Anodic expansion of graphite at different pH has been studied by coupling a mass spectrometer to an electrochemical cell. The mass spectrometry technique permits to follow the electrochemical gasification of graphite as well as the reaction products formed from the electrolyte. The current and mass spectrometry signals suggest that the neutral medium is the least aggressive for expansion. In addition, chronoamperometric expansion of graphite at different potentials has been carried out using the neutral medium. This experimental approach permits to get detailed information about the reaction mechanism that produces graphene-oxide based materials. The effect of potential and electrolyte concentration have been studied, and it has been observed that the degree of oxidation of the graphene oxide material obtained can be controlled. In addition, a kinetic model based on a phase-moving boundary has been used to describe the chronoamperometric experiments. Two types of graphene oxide materials have been obtained with the anodic synthesis and have been classified as few-layer graphene oxides (FLGOs) and graphene oxide quantum dots (GOQDs). The physicochemical and electrochemical properties of both products have been studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

10 years of frontiers in carbon-based materials: carbon, the “newest and oldest” material. The story so far

  • Flores-Lasluisa, Jhony Xavier
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
While carbon in itself appears as simple an element as it could possibly get, the undeniable truth is that carbon materials represent a plethora of possibilities both from the perspective of their structure and their applications. While we may believe that carbon is “just another element”, one should never forget that its special ability to coordinate through different hybridizations with apparent ease grants the element properties that no other element may even match. Taking this one step further into the materials realm opens up numerous avenues in terms of materials dimensionality, surface and bulk functionalization, or degree of structural order just to mention a few examples. If these properties are translated into the properties and applications field, the results are just as impressive, with new applications and variants appearing with growingly larger frequency. This has resulted in over a million scientific papers published in the last decade in which the term “carbon” was used either in the title, abstract or keywords. When the search is narrowed down to the field “title” alone, the results drop to just over 318.000 scientific papers. These are figures that no other element in the periodic table can equal, which is a clear indicative that the story of carbon materials is still under constant evolution and development. This review will present an overview of the works published in the Frontiers in Carbon-based materials section during its 10 years of life that reflect the advancements achieved during the last decade in the field of carbon materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable electrocatalysts: Lignin-derived carbon fibers doped with few-layer graphene for high-performance zinc-air batteries

  • Jaimes-Paez, Cristian Daniel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
In this study, we present an innovative approach to synthesize lignin-based carbon fibers doped with Pt-containing few-layer graphene (FLG) by electrospinning, for their use as electrocatalysts in rechargeable zinc-air batteries. The use of Organosolv lignin, a renewable biopolymer, offers a sustainable alternative to conventional non-renewable precursors, while the Pt-containing FLG with minimal structural defects and low oxygen content is produced via an electrochemical exfoliation method. The resulting carbon fibers exhibit diameters between 0.5 and 1 μm and contain less than 0.1 wt% platinum, which is uniformly distributed within the graphene structure. Physicochemical characterization demonstrated that the nitrogen-doped carbon matrix, facilitated by the use of polyvinylpyrrolidone (PVP), significantly enhances electrocatalytic performance. When carbon fibers electrocatalysts were tested in zinc-air batteries, a specific capacity of 695 mA h gZn−1 is achieved and they maintain high stability under current densities up to 50 mA cm−2, outperforming commercial Pt/C catalysts in charge-discharge cycles at different current densities. This sustainable approach combines renewable and scalable materials, contributing to the advancement of the development of efficient and durable electrodes for metal-air batteries with very small platinum content, providing a promising pathway towards renewable energy storage solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "In-situ synthesis of encapsulated N-doped carbon metal oxide nanostructures for Zn-air battery applications"

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Decoding active sites in metal-free N-doped carbon electrocatalysts for oxygen reduction reaction via in situ synchrotron near-ambient pressure XPS

  • Morallon, Emilia
  • Alemany Molina, Gabriel
  • Urpelainen, Samuli
  • Ghosalya, Manoj
  • Shavorskiy, Andrey
  • Calabuig-Mompó, Samuel
  • García-Santos, Lidia
  • Cazorla-Amorós, Diego
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Calabuig-Mompó, Samuel|||/items/db46af8e-bf8f-4b95-8580-7d71d4255b55
  • García-Santos, Lidia|||/items/f1c64d7a-c224-4df9-8b4a-1b83259628c2
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Metal-free nitrogen-doped carbon materials are promising electrocatalysts towards oxygen reduction reaction (ORR), yet the nature of the active sites remains under debate. Previous investigations based on ex situ X-ray photoelectron spectroscopy (XPS) characterization and computational modelling studied the role of graphitic N species in ORR and suggested that these species at the carbon edges are the most active site towards ORR in alkaline conditions and pyridone type groups (N-C-O) may be formed as ORR intermediates. However, these findings are limited by the ex situ XPS measurement approach. Air exposure and vacuum treatment can alter oxidation states and surface adsorbates, hindering direct correlation with electrochemical performance. In addition, short-lived reaction intermediates that form under in situ conditions are inherently transient and are therefore not captured by ex situ measurements, leading to an incomplete representation of the active surface during electrochemical operation. Sensitivity of the ex situ XPS can also be a challenge. To overcome these limitations, we report the first in situ investigation of N-doped metal free electrocatalysts using near-ambient pressure XPS (NAP-XPS) under highly controlled electrochemical conditions at a synchrotron source. This in situ approach enables the dynamic evolution of nitrogen species as a function of applied potential and electrolyte environment (acidic and alkaline) under close to realistic ORR conditions, allowing previously proposed active-site assignments to be critically evaluated. The use of this technique opens the door to studying carbon-based electrocatalysts with different functionalities under operating conditions, with the aim of gaining a more detailed understanding of the reaction mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mechanochemical synthesis of nanostructured metal-loaded graphene oxide for bifunctional electrocatalysis in rechargeable Zn-air batteries

  • Calabuig-Mompó, Samuel
  • Chinchilla, Lidia Esther
  • Calvino, Jose J.
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Calabuig-Mompó, Samuel|||/items/db46af8e-bf8f-4b95-8580-7d71d4255b55
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Bifunctional electrocatalysts based on iron phthalocyanine (FePc) and metal hydroxides supported on low oxidised few layer graphene oxide were synthesized through a one-step mechanochemical process, under solvent-free conditions. Electrochemically expanded graphene oxide was directly incorporated into ball milling with metal precursors, yielding well-dispersed hybrid catalysts whose structure and composition confirm the efficiency of this straightforward method. The materials displayed promising activity and stability towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), with iron phthalocyanine and nickel hydroxide emerging as the most effective catalyst. Post-reaction analyses showed that OER conditions significantly degraded the FePc, whereas ORR cycling caused minimal structural changes. When applied as cathodes in rechargeable Zn-air batteries, the catalysts demonstrated superior charge-discharge durability compared to Pt/C + RuO2. These results highlight ball milling as an effective and environmentally friendly route for the scalable synthesis of high-performance bifunctional electrocatalysts for Zn-air batteries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Eco-Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn-Air Batteries

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The development of green and environmentally friendly synthesis methods of electrocatalysts is a crucial aspect in decarbonizing energy generation. In this study, eco-friendly mechanochemical synthesis of perovskite metal oxide-carbon black composites is proposed using different conditions and additives such as KOH. Furthermore, the optimization of ball milling conditions, including time and rotational speed, is studied. The mechanochemical synthesis in solid-state conditions without additives produces electrocatalysts that exhibit the highest bifunctional electrochemical activity towards both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, this synthesis demonstrates a lower Environmental Impact Factor (E-factor), indicating its greener nature, and due to its simplicity, it has a great potential for scalability. The obtained bifunctional electrocatalysts have been tested in a rechargeable zinc-air battery (ZAB) for 22 h with similar performance compared to the commercial catalyst (Pt/C) at significantly lower cost. These promising findings are attributed to the enhanced interaction between the perovskite metal oxide and carbon material and the improved dispersion of the perovskite metal oxide on the carbon materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Interaction between Lanthanum Manganese Cobalt Oxide and Carbon Black through Different Approaches for Primary Zn–Air Batteries

  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Due to the need for decarbonization in energy generation, it is necessary to develop electrocatalysts for the oxygen reduction reaction (ORR), a key process in energy generation systems such as fuel cells and metal–air batteries. Perovskite–carbon material composites have emerged as active and stable electrocatalysts for the ORR, and the interaction between both components is a crucial aspect for electrocatalytic activity. This work explores different mixing methods for composite preparation, including mortar mixing, ball milling, and hydrothermal and thermal treatments. Hydrothermal treatment combined with ball milling resulted in the most favorable electrocatalytic performance, promoting intimate and extensive contact between the perovskite and carbon material and improving electrocatalytic activity. Employing X-ray photoelectron spectroscopy (XPS), an increase in the number of M-O-C species was observed, indicating enhanced interaction between the perovskite and the carbon material due to the adopted mixing methods. This finding was further corroborated by temperature-programmed reduction (TPR) and temperature-programmed desorption (TPD) techniques. Interestingly, the ball milling method results in similar performance to the hydrothermal method in the zinc–air battery and, thus, is preferable because of the ease and straightforward scalability of the preparation process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unraveling the interfacial degradation mechanism of a metal oxide electrocatalyst/gas diffusion layer in Zn–air batteries through FIB-SEM analysis

  • García-Rodríguez, Mario
  • González-Souto, Lorena
  • Hernández-Saz, Jesús
  • Juan Juan, Jerónimo
  • Calvino, Jose J.
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Focused Ion Beam -Scanning Electron Microscopy (FIB-SEM) was employed to investigate the Gas Diffusion Layer (GDL), electrocatalyst, and electrolyte interface in rechargeable Zn-Air Batteries (ZABs) using Fresh and Used samples (before and after long-term electrocatalytic activity, respectively). The electrocatalyst was based on (hydro-)oxides of manganese, cobalt and lanthanum and carbon material. The results reveal a loss of material compaction in the Used sample, accompanied by the formation of pores and irregular gaps, as well as enhanced permeation of the electrocatalyst through the GDL, as evidenced in the tomogram. Interestingly, the analysis of the distribution of elements in the Used sample shows important differences, strongly dependent on their chemical properties in the electrolyte used. Mn and Co, the more electroactive elements for the oxygen-involved reactions, remain in proximity to the electrolyte interface, while La forms a preferential region more distant and parallel to the electrolyte. XPS results indicate that the formation of this region is associated with the generation of lanthanum acetate species, which are responsible for the decrease in conductivity of the Used sample, as demonstrated by electrochemical impedance spectroscopy (EIS) experiments, in addition to impairing O 2 diffusion along the GDL. Furthermore, DFT calculations support that the formation of lanthanum acetate species from the metal (hydro)oxides is energetically favorable in presence of zinc acetate electrolyte in ZABs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced lanthanum-stabilized low crystallinity metal oxide electrocatalysts with superior activity for oxygen reactions

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key electrochemical reactions for the development of rechargeable Zn-air batteries. However, due to the high cost of commercial noble metal-based catalysts and their limited bifunctionality, it is necessary the design of new electrocatalysts. In this study, stable electrocatalysts have been synthesized through a hydrothermal method and further low-temperature thermal treatment. The materials consist of La stabilized low crystallinity Mn and Co metal (hydro-)oxides. The electrocatalytic performance of these materials has been compared with counterparts calcined at higher temperatures. The findings demonstrate that materials synthesized at lower temperatures and with low crystallinity exhibit superior electrocatalytic activity for both ORR and OER. Moreover, the research highlights the favorable influence of the lanthanum cation, which enhances changes of surface morphology and oxidation states of other cations (Mn and Co). Additionally, the positive contribution of the carbon component to electrochemical activity and electrical conductivity has been elucidated. The best electrocatalyst was studied in a rechargeable Zn-air battery with a durability of up to 120 hours. They exhibited better stability and performance than the commercial Pt/C + RuO2 catalyst currently used.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries"

  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries

  • Jaimes-Paez, Cristian Daniel
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, the effect of the palladium precursor on the Oxygen Reduction Reaction (ORR) performance of lignin-based electrospun carbon fibers was studied. The fibers were spun from a lignin-ethanol solution free of any binder, where different Pd salts were added at two concentration levels. The system implemented to perform the spinning was a coaxial setup in which the internal flow contains the precursor dispersion with the metallic precursor, and ethanol was used as external flow to help fiber formation and prevent drying before generating the Taylor cone. The obtained cloths were thermostabilized in air at 200 °C and carbonized in nitrogen at 900 °C. The resulting carbon fibers were characterized by physicochemical and electrochemical techniques. The palladium precursor significantly affects nanoparticle distribution and size, fiber diameter, pore distribution, surface area and electrochemical behavior. The fibers prepared with palladium acetylacetonate at high Pd loading and carbonized at 900 °C under a CO2 atmosphere showed high mechanical stability and the best ORR activity, showing near total selectivity towards the 4-electron path. These features are comparable to those of the commercial Pt/C catalyst but much lower metal loading (10.6 wt.% vs. 20 wt.%). The most promising fibers have been evaluated as cathodes in a zinc–air battery, delivering astonishing stability results that surpassed the performance of commercial Pt/C materials in both charging and discharging processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-performance transition metal nitride/carbon nanofiber composites as positive electrode in rechargeable Zn-air batteries

  • Posadzy, Marta
  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Moyseowicz, Agata
  • Kordek-Khalil, Karolina
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Rechargeable zinc-air batteries (ZABs) represent one of the most promising devices for future portable energy storage. However, bifunctional and cost-effective electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) need to be developed for practical real-world scenarios. This work presents a comprehensive optimization of the simple and green hydrothermal method to synthesise metal (Co/Fe) nitrides integrated with carbon nanofibers (CNF). The prepared nanocomposites exhibit remarkable electrocatalytic performance in OER and ORR. The combination of both metals in the CoFe-Fe3N/CNF material induces the highest bifunctional activity, attributed to a synergistic effect between the metals, and presence of a thin layer of cobalt oxide at the surface. The CNF content in the composite material is optimised, revealing the favourable CNF concentration of 60 wt.%. The electrocatalysts with the highest bifunctional activity were evaluated as positive electrodes in ZABs, achieving superior cycling stability compared to a commercial Pt/C-RuO2 electrocatalyst, and sustaining stability up to 60 hours at a current density of 5 mA/cm2. These results underline the significant potential of cobalt-iron nitride/carbon nanofiber composites as highly efficient catalysts for oxygen electrochemical reactions and as promising components for improving the performance of rechargeable Zn-air batteries, thus contributing to the advancement of clean energy technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Perovskite-Type Metal Oxides and the Role of Carbon Materials in Zn-Based Aqueous Batteries

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Perovskite-type metal oxides are employed as cathodes in Zn-air batteries (ZABs) and Zn-ion batteries (ZIBs). While research on ZABs is extensively documented, their application in ZIBs is a more recent area of investigation. The fundamental principles of these battery technologies and their respective reaction mechanisms are reviewed. We identify the crucial structural and compositional parameters that dictate electrochemical performance. Although perovskite-type metal oxide materials are frequently integrated with carbon materials, their contribution is often not adequately emphasized in research articles. This review underscores the pivotal influence of carbon-based materials on the final electrocatalytic activity, positioning them not merely as additives but as active components that significantly impact the reaction mechanism and the overall properties of the metal oxide. Notably, perovskite metal oxides can form B–O–C interactions (where B represents a metal) with carbon materials, substantially affecting their performance. Furthermore, this review provides a comprehensive analysis of the diverse mixing strategies currently utilized, the nature of the most commonly employed carbon materials, and their electrochemical response in both ZABs and ZIBs. Finally, we discuss future perspectives and existing challenges in the pursuit of highly active and efficient perovskite metal oxide cathodes for these batteries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon science perspective in 2026: Current research and future challenges

  • Meunier, Vincent
  • Ania, Conchi O.
  • Barbara, Paola
  • Bianco, Alberto
  • Cao, Mao-Sheng
  • Chen, Yuan
  • Ewels, Chris
  • Costa Girao, Eduardo
  • Ahm Kim, Yoong
  • Liu, Chang
  • Lv, Ruitao
  • Morallon, Emilia
  • Nishihara, Hirotomo
  • Terrones, Mauricio
  • Yu, Wei
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Sr substitution in La1-xSrxMn0.7Co0.3O3 perovskites and their application in Zn-air batteries

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
La1-xSrxMn0.7Co0.3O3 perovskite materials were synthesized by a sol-gel method for their application as an air electrode in Zn-air batteries. Through physicochemical techniques, it was determined that the Sr substitution level influences the crystallite size and purity degree of the perovskite structure. Moreover, the surface chemistry, including oxygen chemisorbed species and different oxidation states of 3d cations, can be tailored through the Sr substitution level. The metal oxides were mixed with carbon black (Vulcan XC-72R) to improve the electrochemical performance. Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) studies revealed the strong interaction existing between both components, which tends to increase with the Sr substitution level due to the smaller crystallite size. However, low Sr substitution level results in better electrocatalytic performance because of a moderate concentration increase of Mn4+ and oxygen chemisorbed species. Moreover, it helps to preserve the perovskite structure and increases the concentration of Co3+ species, which are more catalytic towards OER. Thus, the La0.8Sr0.2Mn0.7Co0.3O3/Vulcan material was studied in a Zn-air battery and compared to a commercial Pt/C + RuO2 electrocatalyst. The material shows comparable long-term charge-discharge performance to Pt/C + RuO2 after 20 h of cycling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rapid electrochemical readout of alkaline phosphatase activity and phosphate inhibition in silica films

  • Sáenz-Espinar, María J.
  • Montilla, Francisco
  • Mateo, C. Reyes
  • Huerta Arráez, Francisco
  • Sáenz-Espinar, María J.|||/items/25a493a3-dc3c-4452-9022-70a50b07420d
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
This work introduces a bioelectrochemical platform for the rapid electrochemical readout of alkaline phosphatase (ALP) activity based on enzyme entrapment within sol–gel silica films deposited on glassy carbon electrodes. Fluorescence spectroscopy confirms that immobilization preserves the structural integrity of the enzyme while creating a confined microenvironment within the silica matrix. Electrochemical experiments show that the enzymatic hydrolysis of hydroquinone diphosphate generates hydroquinone inside the film, which is detected voltammetrically at the electrode surface. The steady-state oxidation current provides a direct electrochemical readout of the enzymatic reaction rate, allowing the system response to be described using a modified Michaelis–Menten framework in the presence of phosphate as a competitive inhibitor. The estimated activity should be regarded as an apparent specific activity of the immobilized ALP, reflecting the fraction of enzyme effectively contributing to substrate conversion and electrochemical product detection within the silica-film/electrode. An apparent inhibition constant of 3.64 mM was obtained, in good agreement with reported values for ALP in solution, indicating that the film architecture largely preserves the native enzyme–inhibitor interaction. The use of glassy carbon electrodes enables repeated measurements in different solutions using the same biofunctionalized electrode, providing a practical advantage over disposable screen-printed electrode configurations previously employed for ALP-based inhibition assays.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking the efficiency of low-Cu content metal oxide perovskite for green ammonia synthesis through electrochemical nitrate reduction

  • García-Rodríguez, Mario
  • Dutta, Abhijit
  • Liu, Menglong
  • Broekmann, Peter
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical nitrate reduction reaction (e-NO3RR) is gaining attention as a strategy for nitrate removal in wastewater treatment, with the dual benefit of converting harmful nitrates into a valuable chemical resource such as ammonia. However, developing active and selective electrocatalysts remains a critical hurdle for industrial implementation. This work addresses this challenge by exploring perovskite-type metal oxides composed of Mn, Co, and Cu at different Mn:Cu ratios. Our results demonstrated that a low Cu content led to remarkably high Faradaic efficiencies toward ammonia (FENH3), approaching 100% at a potential of –0.3 V vs. RHE in alkaline electrolyte. This finding translated to an ammonia production rate of 1.6 mmol h-1 mgcat-1 cm-2, markedly surpassing the performance of Mn-based electrocatalysts alone. This enhancement was attributed to the formation of hetero-interfacial perovskite crystal structures of La(MnCo)O3 and La2(CuO4), the formation of porous surface morphologies, and enhanced presence of surface oxygen vacancies. The Cu(I)/Cu(II) and Mn(III)/Mn(IV) redox transitions are highlighted as the cause of the improvement related to synergistic effects. Mn centers provide optimal adsorption and activation of nitrate, while adjacent Cu sites facilitate efficient proton transfer through enhanced H2O activation. The samples were also analyzed in neutral medium and presented FENH3 ∼40% at –0.2 V. Notably, the samples exhibited excellent stability under e-NO3RR conditions for 24 h, thereby highlighting their potential for practical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

In-situ synthesis of encapsulated N-doped carbon metal oxide nanostructures for Zn-air battery applications

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
La, Mn and Co-based materials with diverse compositions encapsulated in N-doped carbon materials were synthesized by an in-situ sol-gel method. The as-prepared materials were physically activated with CO2 giving as a result composites with excellent performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The composites were characterized by different physicochemical techniques revealing the importance of porosity created by CO2 activation. This crucial step increases the number of accessible active sites such as Co-Nx-C sites, Co/MnO heterointerfaces and graphitic N groups. Moreover, the formation of La2O2CO3 was detected to enhance electrical conductivity and electrochemical performance and it is active for ORR. Although the composite containing La, Mn and Co has less concentration of the highly active sites, its small particle size favour a better distribution of these sites. The Co-containing composites were tested as air-electrodes in a Zn-air battery and compared to commercial electrocatalysts. All composites showed a better operation in terms of higher cyclability and higher energy density which is a consequence of metal nanostructures encapsulation in N-doped porous carbon shells. Interestingly, the pure Co-based composite showed an outstanding performance related to the high concentration of the Co-Nx-C active sites that provide high activity and stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-Driven Enhancement in Zinc Hexacyanoferrate Composites: A Ball-Milling Approach for High-Performance Zn-Ion Batteries

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Toledo-Carrillo, Esteban A.
  • Dutta, Joydeep
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Transition to a sustainable energy future demands the development of alternative battery technologies beyond lithium-ion batteries, which are challenging for large-scale implementation due to inherent safety concerns and resource scarcity. Aqueous zinc-ion batteries (ZIBs) are a promising solution; however, improvement of the cathode is essential for their widespread adoption. This study investigates the structural modification of zinc hexacyanoferrate (ZnHCF) as cathode materials using ball-milling and the addition of carbon black (Vulcan XC-72R). The improved electroactivity is attributed to the phase transition from cubic to rhombohedral, the conversion of Prussian blue analogue to Prussian white analogue phases, and the synergistic effect produced by the presence of carbon material. These changes lead to the formation of [Fe(CN)6] vacancies, which draw water molecules into interstitial sites. Carbon material plays a crucial role in preserving the crystalline structure of ZnHCF and enhancing the electrochemical performance. The sample milled in presence of carbon material (BM-ZnHCF@C sample) demonstrates superior results compared to the samples unmilled and milled samples without carbon material, achieving a capacity close to 100 mAh g−1 at a current density of 0.5 A g−1. However, after 50 cycles, the capacity decreases by 53.3%, but is restored by replacing the Zn anode while retaining the same cathode. The zinc anode is the primary factor hindering the long-term performance of the assembled battery, as demonstrated by the evolution of the electrode potential over time in the ZIB using a T-type electrochemical cell.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques"

  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-Performance and Environmentally Friendly Electrocatalysts: Perovskite, Metal Hexacyanoferrate, and Carbon Composites for Zn-Batteries and Beyond

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
La Tesis Doctoral trata sobre el desarrollo de electrocatalizadores para baterías basadas en Zn y reacciones relevantes para el medioambiente. Se estudia la síntesis, caracterización fisicoquímica y electroquímica de los electrocatalizadores, además de su aplicación en baterías Zn-aire e ion-Zn. En concreto, se han desarrollado materiales compuestos formados por óxidos métalicos del tipo perovskita (de fórmula ABO3) (mediante diferentes métodos de síntesis modificando la relación de los cationes A y B) y materiales carbonosos. Se ha puesto especial énfasis en estudiar la interacción entre ambos componentes, clave en la actividad electrocatalítica final. La mezcla de ambos componentes mediante mecanoquímica, supone la manera más idónea de las estudiadas (hidrotermal, tratamiento térmico y mortero). Seguidamente, se ha desarrollado una síntesis in-situ donde el material carbonoso se genera en el momento de la síntesis sol-gel, obteniendo resultados extraordinarios en términos de electroactividad y estabilidad en la batería Zn-aire. También, se ha estudiado cuál es la causa de la degradación del cátodo en las baterías Zn-aire en la interfase electrocatalizador-capa difusora de carbón a partir de técnicas microscópicas acoplado a un sistema de iones focalizados. Por otro lado, se ha desarrollado un método de síntesis verde de óxidos metálicos de perovskita mediante mecanoquímica, libre de disolventes, siguiendo los parámetros medioambientales de la química verde. Los hexacianoferratos metálicos de zinc mezclados con el material carbonoso en el molino de bolas han sido empleados en la batería ion-Zn obteniendo resultados mejorados que sus homólogos sin material carbonoso y sin molienda. Finalmente, óxidos metálicos del tipo perovskita han sido empleados como electrocatalizadores selectivos hacia la formación de amoníaco (molécula clave para la implantación del hidrógeno como vector energético) en la reducción electroquímica de nitratos.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Activating Agent-Free Synthesis of N,P-Co-Doped Porous Carbons from Lignocellulosic Waste for the Oxygen Reduction Reaction"

  • Pabón-Román, Keila Melissa
  • Chaparro-Garnica, Jessica
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Pabón-Román, Keila Melissa|||/items/72dcae70-f639-4cf0-8a8f-ba0e2310eefb
This file contains the data of the manuscript Activating Agent-Free Synthesis of N,P-Co-Doped Porous Carbons from Lignocellulosic Waste for the Oxygen Reduction Reaction submitted for publication in Sustainability journal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques

  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Defect-containing carbon nanotube materials were prepared by subjecting two commercial multiwalled carbon nanotubes (MWCNTs) of different purities to purification (HCl) and oxidative conditions (HNO3) and further heat treatment to remove surface oxygen groups. The as-prepared carbon materials were physicochemically characterized to observe changes in their properties after the different treatments. TEM microscopy shows morphological modifications in the MWCNTs after the treatments such as broken walls and carbon defects including topological defects. This leads to both higher surface areas and active sites. The carbon defects were analysed by Raman spectroscopy, but the active surface area (ASA) and the electrochemical active surface area (EASA) values showed that not all the defects are equally active for oxygen reduction reactions (ORRs). This suggests the importance of calculating either ASA or EASA in carbon materials with different structures to determine the activity of these defects. The as-prepared defect-containing multiwalled carbon nanotubes exhibit good catalytic performance due to the formation of carbon defects active for ORR such as edge sites and topological defects. Moreover, they exhibit good stability and methanol tolerances. The as-prepared MWCNTs sample with the highest purity is a promising defective carbon material for ORR because its activity is only related to high concentrations of active carbon defects including edge sites and topological defects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio

  • Riquelme-García, Paula
  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Metal oxides of perovskite structure and SrMn1-xCoO3 type have been prepared by a sol-gel synthesis method and mixed with carbon black by ball milling for their use as electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a Zn-air battery. The composites obtained were characterized by different physicochemical and electrochemical techniques. The results of the characterization revealed the existence of two perovskite phases corresponding to Mn and Co as function of the Mn/Co ratio, whose interaction is related to a positive effect for the electrocatalytic activity. The presence of the M-O-C contribution was detected by XPS, which is related to an improvement in the catalytic activity against ORR/OER due to a better interaction and electron transfer between the perovskite and the carbon material. In addition, important differences were observed in the surface chemical species as a function of Mn/Co ratio and the higher the Co content in the composites the higher the amount of oxygen vacancies. The presence of oxygen vacancies is directly related to an improved OER activity; however, the presence of higher Mn content led to better catalytic results for ORR. The best electrocatalyst was studied in a Zn-air battery obtaining an excellent activity with a cyclability higher than 20 h, which is explained by the appropriate amounts of both Mn and Co.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio"

  • Riquelme-García, Paula
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.