Pasar al contenido principal

PROCESOS SOSTENIBLES DE HIDROGENACION DE CO2 PARA PRODUCCION DE METANOL Y OLEFINAS LIGERAS MEDIANTE CATALIZADORES ELECTROHILADOS DERIVADOS DE BIOMASA RESIDUAL

PID2022-140844OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable electrocatalysts: Lignin-derived carbon fibers doped with few-layer graphene for high-performance zinc-air batteries

  • Jaimes-Paez, Cristian Daniel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
In this study, we present an innovative approach to synthesize lignin-based carbon fibers doped with Pt-containing few-layer graphene (FLG) by electrospinning, for their use as electrocatalysts in rechargeable zinc-air batteries. The use of Organosolv lignin, a renewable biopolymer, offers a sustainable alternative to conventional non-renewable precursors, while the Pt-containing FLG with minimal structural defects and low oxygen content is produced via an electrochemical exfoliation method. The resulting carbon fibers exhibit diameters between 0.5 and 1 μm and contain less than 0.1 wt% platinum, which is uniformly distributed within the graphene structure. Physicochemical characterization demonstrated that the nitrogen-doped carbon matrix, facilitated by the use of polyvinylpyrrolidone (PVP), significantly enhances electrocatalytic performance. When carbon fibers electrocatalysts were tested in zinc-air batteries, a specific capacity of 695 mA h gZn−1 is achieved and they maintain high stability under current densities up to 50 mA cm−2, outperforming commercial Pt/C catalysts in charge-discharge cycles at different current densities. This sustainable approach combines renewable and scalable materials, contributing to the advancement of the development of efficient and durable electrodes for metal-air batteries with very small platinum content, providing a promising pathway towards renewable energy storage solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries"

  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries

  • Jaimes-Paez, Cristian Daniel
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, the effect of the palladium precursor on the Oxygen Reduction Reaction (ORR) performance of lignin-based electrospun carbon fibers was studied. The fibers were spun from a lignin-ethanol solution free of any binder, where different Pd salts were added at two concentration levels. The system implemented to perform the spinning was a coaxial setup in which the internal flow contains the precursor dispersion with the metallic precursor, and ethanol was used as external flow to help fiber formation and prevent drying before generating the Taylor cone. The obtained cloths were thermostabilized in air at 200 °C and carbonized in nitrogen at 900 °C. The resulting carbon fibers were characterized by physicochemical and electrochemical techniques. The palladium precursor significantly affects nanoparticle distribution and size, fiber diameter, pore distribution, surface area and electrochemical behavior. The fibers prepared with palladium acetylacetonate at high Pd loading and carbonized at 900 °C under a CO2 atmosphere showed high mechanical stability and the best ORR activity, showing near total selectivity towards the 4-electron path. These features are comparable to those of the commercial Pt/C catalyst but much lower metal loading (10.6 wt.% vs. 20 wt.%). The most promising fibers have been evaluated as cathodes in a zinc–air battery, delivering astonishing stability results that surpassed the performance of commercial Pt/C materials in both charging and discharging processes.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Simulating a sustainable biorefinery process as autonomous learning tool for collaborative work in the chemical engineering degree

  • Rosas, J.M.
  • Gutiérrez, M.C.
  • Peñas-Garzón, M.
  • Moreno-Medina, I.
  • Ruiz-Rosas, R.
  • Martín, M.A.
  • Rodríguez-Mirasol, J.
  • Cordero, T.
To improve the skills of the students in the Sustainable Refinery and Biorefinery subject of the Degree in Chemical Engineering, a learning tool has been implemented based on collaborative work, autonomy, and the use of information and communication technologies (ICT). This project includes the development of simulations that allow students to apply the learned concepts in a practical way, which were then assessed with the help of a specific rubric created for this purpose. Once the instrument was designed and implemented, its evaluation was carried out using a specific questionnaire. The results indicated that the use of simulation software in the classroom (with a 95 % acceptance rate among students) had a positive impact on the students, facilitating the comprehension of the content (scored a 3.9 out of 1–5 Likert scale), supporting their academic performance (close to 10 % average increase in the student qualifications), and fostering their professional profile in the field of Chemical Engineering (as supported by the rating of 4 out of 1–5 Likert scale). In addition, the constructive feedback provided by the students enabled the teaching team to identify areas for improvement and to consider future changes and updates to the pedagogical approach (as the organization of the seminars). Therefore, the use of different chemical process simulation software packages resulted in an essential strategy to develop the autonomous learning of the students and constituted a successful methodological tool, also preparing them to better meet the challenges of the industrial sector.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Evaluation of acetanilide and antipyrine adsorption on lignin-derived activated carbons

  • Gutiérrez, M.C.
  • García-Mateos, F.
  • Ruiz-Rosas, R.
  • Rosas, J.M.
  • Rodríguez-Mirasol, J.
  • Cordero, T.
In this study, the removal of two emerging pollutants (EPs), antipyrine and acetanilide, through adsorption on activated carbons (ACs) prepared by chemical activation of Organosolv lignin with H3PO4 were evaluated. ACs with different pore size distribution were obtained at different impregnation ratios (H3PO4/lignin, 0.5–3.0 w/w) and activating temperatures (500–900 ◦C). The porosity and surface chemistry of the ACs were determined, and a bimodal size distribution of micropores and narrow mesopores was observed for the different ACs. These ACs were tested for antipyrine and acetanilide adsorption in aqueous solutions in a batch system at 20 ◦C and low concentration levels (0.5–10 ppm). In general, the ACs exhibited higher adsorption affinity to acetanilide than to antipyrine due to its smaller molecular size. Langmuir adsorption isotherm was able to describe the adsorption equilibrium data. A new Linear Driving Force (2-LDF) kinetic model, based on the bimodal size distribution of micropores and narrow mesopores observed for the ACs has been developed. The new model provided a more accurate description of the batch adsorption rates than that obtained from conventional kinetic models, and also enabled to relate the pore size distribution of the adsorbent with the adsorption kinetics. The validity of this model was checked in small-scale column fixed bed adsorption for the AC showing the highest affinity for both EP. The kinetic model and equilibrium adsorption isotherm obtained from the batch experiments were successfully used to provide an accurate description of the bed service time and the full breakthrough profile of acetanilide and antipyrine.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose and xylan nanofiber mats via electrospinning: Lignin-enhanced properties in wood-inspired biocomposites

  • García-Rollán, Miguel
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Porras-Vázquez, José M.
  • Benítez, José J.
  • Athanassiou, Athanassia
  • Heredia-Guerrero, José A.
  • Guzmán-Puyol, Susana
Nanofiber mats were fabricated by combining cellulose, xylan, and organosolv lignin. The biopolymers, and a small amount (15 wt. %) of polyethylene oxide, were dissolved in a mixture of trifluoroacetic acid and trifluoroacetic anhydride, then blended in various ratios (keeping cellulose as the main component and changing the proportions of lignin and hemicellulose) and processed via electrospinning. The resulting nanofiber mats were systematically characterized for their CIELAB color parameters, morphology, chemical composition, mechanical strength, thermal stability, hydrodynamic behavior, antioxidant capacity, and wettability. The incorporation of organosolv lignin significantly altered the color of the nanofiber mats, making them more brownish, with luminosity values from 90 for L-0 to 58 for L-50. It also disrupted the hydrogen bonding network, as evidenced by the chemical shift of the ATR-FTIR spectra. Additionally, organosolv lignin affected key mechanical properties with mechanical values similar to other polymer nanofibers, while thermogravimetric analysis revealed an enhancement of about 10°C in the heat resistant index, thereby broadening the potential applications of the nanofiber mats. Finally, the presence of organosolv lignin improved antioxidant capacity to values of 100% of RSA, reduced water uptake, and increased water contact angle to values of 110° for L-50., This work has been partially supported by the PID2022-140844OB-I00 project funded by MCIN /AEI /10.13039/501100011033 / FEDER, UE. This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” project RYC2023-042483-I/ MICIU/AEI/10.13039/501100011033 (cofinanced by the ESF+). M.G.R. acknowledges the assistance of MICINN through an FPU Grant (FPU 18/01402)., Peer reviewed