Pasar al contenido principal

COMBUSTIBLES A PARTIR DE GAS DE SINTESIS MEDIANTE CATALIZADORES DERIVADOS DE LA BIOMASA

RTI2018-097555-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Artículo científico (JournalArticle)

Binderless ZrO2/HZSM-5 fibrillar composites by electrospinning as catalysts for the dimethyl ether-to-olefins process

  • Cordero-Lanzac, Tomás
  • Rodríguez-Cano, Miguel Ángel
  • Palomo-Jiménez, José
  • Valero-Romero, María José
  • Aguayo, Andres T.
  • Bilbao, Javier
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
The upscaling of zeolitic materials to technical catalysts implies the formulation of the active phase with additives that can affect catalytic performance. As an alternative, we herein present fibrillar ZrO2/HZSM-5 composites prepared by electrospinning where HZSM-5 zeolite aggregates are joint through inert ZrO2 fibers. For zeolite loadings of 5, 10 and 20 wt% and SiO2/Al2O3 ratios of 30, 50 and 80, well-dispersed zeolite aggregates smaller than 1.5 μm have been observed. The ZrO2/HZSM-5 composites were tested as catalysts in the dimethyl ether-to-olefins (DTO) process. The maximum olefin selectivity (ca. 70%) but fastest deactivation was observed for a zeolite loading of 5 wt%, with side reaction extent being promoted when increasing zeolite loading or density of acid sites. A comparison with a technical catalyst suggested that secondary reactions are limited due to the homogeneous distribution of the zeolite in the fibrillary material and to the higher accessibility of zeolite crystals., Spanish Government with EDRF funds, Junta de Andalucía, Basque Government, Basque Government
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Synthesis of Metal-Doped Lignin-Derived Electrospun Carbon Fibers for the Development of ORR Electrocatalysts

  • Jaimes-Paez, Cristian Daniel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The aim of this work is to establish the Oxygen Reduction Reaction (ORR) activity of self-standing electrospun carbon fiber catalysts obtained from different metallic salt/lignin solutions. Through a single-step electrospinning technique, freestanding carbon fiber (CF) electrodes embedded with various metal nanoparticles (Co, Fe, Pt, and Pd), with 8–16 wt% loadings, were prepared using organosolv lignin as the initial material. These fibers were formed from a solution of lignin and ethanol, into which the metallic salt precursors were introduced, without additives or the use of toxic reagents. The resulting non-woven cloths were thermostabilized in air and then carbonized at 900 °C. The presence of metals led to varying degrees of porosity development during carbonization, improving the accessibility of the electrolyte to active sites. The obtained Pt and Pd metal-loaded carbon fibers showed high nanoparticle dispersion. The performance of the electrocatalyst for the oxygen reduction reaction was assessed in alkaline and acidic electrolytes and compared to establish which metals were the most suitable for producing carbon fibers with the highest electrocatalytic activity. In accordance with their superior dispersion and balanced pore size distribution, the carbon fibers loaded with 8 wt% palladium showed the best ORR activity, with onset potentials of 0.97 and 0.95 V in alkaline and acid media, respectively. In addition, this electrocatalyst exhibits good stability and selectivity for the four-electron energy pathway while using lower metal loadings compared to commercial catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Activation of electrospun lignin-based carbon fibers and their performance as self-standing supercapacitor electrodes

  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The production and activation of self-standing carbon electrodes from electrospun lignin fibers was analyzed in this work. Carbon microfibers were prepared at 900 °C from air-stabilized spun cloths by direct carbonization under inert atmosphere and with diluted O2. The modifications of the porosity and surface chemistry of the carbon fibers was also studied by adding H3PO4 in the lignin solution and using different oxygen partial pressures during activation. The presence of phosphoric acid not only increases the porosity development and the preparation yield, but also enhances the gravimetric capacitance of the electrodes. In addition, the activation in presence of oxygen increases the surface area and the generation of wider micropores. Microporous carbon fibers with surface areas as high as 2340 m2 g−1 were obtained using this method. The direct conformation of carbon fibers into binderless electrodes allows to achieve high-power rate capability supercapacitors. Activation in presence of oxygen can enhance up to 50% the energy storage of supercapacitors without compromising the power of the device (8.4 Wh kg−1 and Pmax of 47 kW kg−1). However, at high activation degrees, no further gain in energy density is observed due to the excessive widening of micropores, and the loss of electrical conductivity that increases the cell resistance, limiting the power capability of the device. The optimal results in terms of energy, power and durability are achieved combining low amounts of H3PO4 and mild activation with O2, confirming that electrospinning of lignin is a promising method for sustainable production of self-standing supercapacitor electrodes.