Pasar al contenido principal

MATERIALES CARBONOSOS NANOESTRUCTURADOS PARA LA HETEROGENEIZACION DE CATALIZADORES HOMOGENEOS QUIRALES

MAT2009-07150

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrogen storage in CO2-activated amorphous nanofibers and their monoliths

  • Kunowsky, Mirko
  • Marco Lozar, Juan Pablo
  • Oya, Asao
  • Linares-Solano, Angel
Amorphous carbon nanofibers (CNFs), produced by the polymer blend technique, are activated by CO2 (ACNFs). Monoliths are synthesized from the precursor and from some ACNFs. Morphology and textural properties of these materials are studied. When compared with other activating agents (steam and alkaline hydroxides), CO2 activation renders suitable yields and, contrarily to most other precursors, turns out to be advantageous for developing and controlling their narrow microporosity (< 0.7 nm), VDR(CO2). The obtained ACNFs have a high compressibility and, consequently, a high packing density under mechanical pressure which can also be maintained upon monolith synthesis. H2 adsorption is measured at two different conditions (77 K / 0.11 MPa, and 298 K / 20 MPa) and compared with other activated carbons. Under both conditions, H2 uptake depends on the narrow microporosity of the prepared ACNFs. Interestingly, at room temperature these ACNFs perform better than other activated carbons, despite their lower porosity developments. At 298 K they reach a H2 adsorption capacity as high as 1.3 wt.%, and a remarkable value of 1 wt.% in its mechanically resistant monolith form.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Utility of Sodium and Potassium Hydroxides for Preparing Superior Quality Activated Carbons

  • Linares-Solano, Angel
  • Lillo-Rodenas, Maria Angeles
  • Marco Lozar, Juan Pablo
  • Kunowsky, Mirko
  • Romero Anaya, Aroldo José
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
Alkaline hydroxides, especially sodium and potassium hydroxides, are multi-million-ton per annum commodities and strong chemical bases that have large scale applications. Some of them are related with their consequent ability to degrade most materials, depending on the temperature used. As an example, these chemicals are involved in the manufacture of pulp and paper, textiles, biodiesels, soaps and detergents, acid gases removal (e.g., SO2) and others, as well as in many organic synthesis processes. Sodium and potassium hydroxides are strong and corrosive bases, but they are also very stable chemicals that can melt without decomposition, NaOH at 318°C, and KOH at 360°C. Hence, they can react with most materials, even with relatively inert ones such as carbon materials. Thus, at temperatures higher than 360°C these melted hydroxides easily react with most types of carbon-containing raw materials (coals, lignocellulosic materials, pitches, etc.), as well as with most pure carbon materials (carbon fibers, carbon nanofibers and carbon nanotubes). This reaction occurs via a solid-liquid redox reaction in which both hydroxides (NaOH or KOH) are converted to the following main products: hydrogen, alkaline metals and alkaline carbonates, as a result of the carbon precursor oxidation. By controlling this reaction, and after a suitable washing process, good quality activated carbons (ACs), a classical type of porous materials, can be prepared. Such carbon activation by hydroxides, known since long time ago, continues to be under research due to the unique properties of the resulting activated carbons. They have promising high porosity developments and interesting pore size distributions. These two properties are important for new applications such as gas storage (e.g., natural gas or hydrogen), capture, storage and transport of carbon dioxide, electricity storage demands (EDLC-supercapacitors-) or pollution control. Because these applications require new and superior quality activated carbons, there is no doubt that among the different existing activating processes, the one based on the chemical reaction between the carbon precursor and the alkaline hydroxide (NaOH or KOH) gives the best activation results. The present chapter covers different aspects of the activation by hydroxides, including the characteristics of the resulting activated carbons and their performance in some applications. The following topics are discussed: i) variables of the preparation method, such as the nature of the hydroxide, the type of carbon precursor, the hydroxide/carbon precursor ratio, the mixing procedure of carbon precursor and hydroxide (impregnation of the precursor with a hydroxide solution or mixing both, hydroxide and carbon precursor, as solids), or the temperature and time of the reaction are discussed, analyzing their effect on the resulting porosity; ii) analysis of the main reactions occurring during the activation process, iii) comparative analysis of the porosity development obtained from different activation processes (e.g., C02, steam, phosphoric acid and hydroxides activation); and iv) performance of the prepared activated carbon materials on a few applications, such as VOC removal, electricity and gas storages.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Support effects in a Rh diamine complex heterogenized on carbon materials

  • Gheorghiu, Constanta Cristina
  • Salinas Martínez de Lecea, Concepción
  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The Rh diamine complex [Rh(COD)NH2(CH2)2NH(CH2)3Si(OCH3)3] BF4 was heterogenized by covalent bonding on two carbon xerogels and on carbon nanofibers, with the objective of preparing hydrogenation hybrid catalysts. Gas adsorption, SEM, TEM, DTP, ICP-OES and XPS were used for characterization. The results indicate that the active molecule is mainly located in supermicropores and produces microporosity blockage. The hybrid catalysts are more active than the homogeneous complex, but the Rh complex is partially reduced upon reaction. This modification is related to the nature of the support, which also shows effects in the stabilization against sintering of the Rh particles formed. The support porosity is a key factor in the selectivity differences between the catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

NaOH and KOH for preparing activated carbons used in energy and environmental applications

  • Linares-Solano, Angel
  • Lillo-Rodenas, Maria Angeles
  • Marco Lozar, Juan Pablo
  • Kunowsky, Mirko
  • Romero Anaya, Aroldo José
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
Alkaline hydroxides, especially sodium and potassium hydroxides, are multi-million-ton per annum commodities and strong chemical bases that have large scale applications. Some of them are related with their consequent ability to degrade most materials, depending on the temperature used. As an example, these chemicals are involved in the manufacture of pulp and paper, textiles, biodiesels, soaps and detergents, acid gases removal (e.g., SO2) and others, as well as in many organic synthesis processes. Sodium and potassium hydroxides are strong and corrosive bases, but they are also very stable chemicals that can melt without decomposition, NaOH at 318ºC, and KOH at 360ºC. Hence, they can react with most materials, even with relatively inert ones such as carbon materials. Thus, at temperatures higher than 360ºC these melted hydroxides easily react with most types of carbon-containing raw materials (coals, lignocellulosic materials, pitches, etc.), as well as with most pure carbon materials (carbon fibers, carbon nanofibers and carbon nanotubes). This reaction occurs via a solid-liquid redox reaction in which both hydroxides (NaOH or KOH) are converted to the following main products: hydrogen, alkaline metals and alkaline carbonates, as a result of the carbon precursor oxidation. By controlling this reaction, and after a suitable washing process, good quality activated carbons (ACs), a classical type of porous materials, can be prepared. Such carbon activation by hydroxides, known since long time ago, continues to be under research due to the unique properties of the resulting activated carbons. They have promising high porosity developments and interesting pore size distributions. These two properties are important for new applications such as gas storage (e.g., natural gas or hydrogen), capture, storage and transport of carbon dioxide, electricity storage demands (EDLC-supercapacitors-) or pollution control. Because these applications require new and superior quality activated carbons, there is no doubt that among the different existing activating processes, the one based on the chemical reaction between the carbon precursor and the alkaline hydroxide (NaOH or KOH) gives the best activation results. The present article covers different aspects of the activation by hydroxides, including the characteristics of the resulting activated carbons and their performance in some environment-related applications. The following topics are discussed: i) variables of the preparation method, such as the nature of the hydroxide, the type of carbon precursor, the hydroxide/carbon precursor ratio, the mixing procedure of carbon precursor and hydroxide (impregnation of the precursor with a hydroxide solution or mixing both, hydroxide and carbon precursor, as solids), or the temperature and time of the reaction are discussed, analyzing their effect on the resulting porosity; ii) analysis of the main reactions occurring during the activation process, iii) comparative analysis of the porosity development obtained from different activation processes (e.g., CO2, steam, phosphoric acid and hydroxides activation); and iv) performance of the prepared activated carbon materials on a few applications, such as VOC removal, electricity and gas storages.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ligand tethering by ion-exchange for the immobilization of homogeneous catalysts

  • Such-Basañez, Ion
  • Salinas Martínez de Lecea, Concepción
  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
A Rh phosphine complex, derived from the Wilkinson’s catalyst, has been immobilized by ion-exchange on the ammonium form of a Al-MCM-41 sample. Ammonium ions have been exchanged by cholamine ions, which act as an amine ligand, and then the Wilkinson’s catalyst has been immobilized by substitution of a phosphine ligand by the anchored amine. This is a novel immobilization procedure, as a ligand, instead of the whole complex, is tethered to the support by ion exchange. The obtained hybrid catalyst has been characterized by Elemental Analysis, DRIFTS and XPS. The quantitative exchange of ammonium by cholamine and coordination of Rh to amines has been observed. Most of the anchored Rh is considered to be coordinated to the ligand tethered to the support and a small proportion seems to be interacting with the protonated ligand or with the support surface. The catalyst has been tested in the hydrogenation of cyclohexene and in the hydroformylation of 1-octene. In the first case the catalyst is active and reusable, while a strong Rh leaching takes place in the second one.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrothermal and conventional H3PO4 activation of two natural bio-fibers

  • Romero Anaya, Aroldo José
  • Lillo-Rodenas, Maria Angeles
  • Salinas Martínez de Lecea, Concepción
  • Linares-Solano, Angel
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
Two phosphoric acid activation procedures; Activation after Hydrothermal Impregnation (recently published) and Activation after Incipient Wetness Impregnation instead of conventional impregnation are analyzed in two natural bio-fiber precursors: banana pseudostem and coconut fiber matting. Both procedures are compared analyzing, in both precursors, the influence that variables such as H3PO4/precursor ratio, activation temperature and impregnation time have on the resulting activated carbons (ACs) properties. The work also pays special attention to the mesoporosity development and the application of these ACs to adsorb gasoline vapors. Both H3PO4 activation procedures develop activated carbons having suitable activation yields and porosity developments, giving the Activation after Incipient Wetness Impregnation method better results than the Activation after Hydrothermal Impregnation. Both natural bio-fibers are good precursors, rendering the coconut fiber matting better results than the banana pseudostem. The variables studied affect the porosity development, being precursor and H3PO4/precursor ratio the variables that most affect. By a suitable selection of these variables, activated carbons having high adsorption capacities (BET above 2500 m2 g−1 and micropore volume above 1.00 cm3 g−1) and well developed mesoporosity (reaching 1.41 cm3 g−1), can be prepared. Most of the samples prepared perform very well for adsorbing gasoline vapors, showing a linear relationship with their resulting volumes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Opportunities in the use of carbon materials to develop heterogenized metal complexes for catalytic applications

  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Carbon materials constitute a broad family of solids that encompass a high variety of physical and chemical properties, including morphology. These materials have shown to be very useful as catalysts supports and, in this context, also for the heterogenization of metal complexes owing catalytic properties. This work is mainly, the summary of the results obtained in several research projects focused on developing heterogenized molecular catalysts by exploiting the properties of a plethora of carbon materials to address several immobilization procedures.