Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Mineralization of Lipase from Thermomyces lanuginosus Immobilized on Methacrylate Beads Bearing Octadecyl Groups to Improve Enzyme Features

  • Guimarães, José R.
  • Carballares Navarro, Diego
  • Rocha Martín, Javier
  • Tardioli, Paulo W.
  • Fernandez Lafuente, Roberto
Lipase from Thermomyces lanuginosus (TLL) has been immobilized on Purolite Lifetech® ECR8806F (viz. methacrylate macroporous resin containing octadecyl groups, designated as Purolite C18-TLL), and the enzyme performance has been compared to that of the enzyme immobilized on octyl-agarose, designated as agarose C8-TLL. The hydrolytic activity versus p-nitrophenol butyrate decreased significantly, and to a lower extent versus S-methyl mandelate (more than twofold), while versus triacetin and R-methyl mandelate, the enzyme activity was higher for the biocatalyst prepared using Purolite C18 (up to almost five-fold). Regarding the enzyme stability, Purolite C18-TLL was significantly more stable than the agarose C8-TLL. Next, the biocatalysts were mineralized using zinc, copper or cobalt phosphates. Mineralization increased the hydrolytic activity of Purolite C18-TLL versus triacetin and R-methyl mandelate, while this activity decreased very significantly versus the S-isomer, while the effects using agarose C8-TLL were more diverse (hydrolytic activity increase or decrease was dependent on the metal and substrate). The zinc salt treatment increased the stability of both biocatalysts, but with a lower impact for Purolite C18-TLL than for agarose-C8-TLL. On the contrary, the copper and cobalt salt treatments decreased enzyme stability, but more intensively using Purolite C18-TLL. The results show that even using enzymes immobilized following the same strategy, the differences in the enzyme conformation cause mineralization to have diverse effects on enzyme stability, hydrolytic activity, and specificity.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Determination of immobilized lipase stability depends on the substrate and activity determination condition: Stress inactivations and optimal temperature as biocatalysts stability indicators

  • da Rocha, Thays N.
  • Carballares, Diego
  • Guimarães, José R.
  • Rocha Martín, Javier
  • Tardioli, Paulo W.
  • Gonçalves, Luciana R.B.
  • Fernandez Lafuente, Roberto
Lipases A and B from Candida antarctica (CALA and CALB), Thermomyces lanuginosus (TLL) and Candida rugosa have been immobilized on octyl, octyl-vinyl sulfone (blocked with ethylendiamine) and amino-glutaraldehyde. The biocatalysts exhibited different specificity versus triacetin and p-nitro phenyl butyrate. Optimal activities were determined using triacetin for all biocatalysts, and this ranged from 40 °C for CALA and TLL, to 60 °C for an amino-glutaraldehyde-CRL. The biocatalysts were inactivated at 70 and 75 °C, determining their residual activities at 25 °C or 55 °C. The inactivation courses were very different depending on the substrate; in most cases the biocatalysts maintained more activity during the thermal inactivation using triacetin (except using TLL). When determining the residual activities at 55 °C, the values increased in most cases, reaching high hyperactivation values using CALA (even 23 folds). That way, the “stability” of the different preparations was strongly influenced by the substrate and residual activity determination conditions, and did not agree in most cases with the optimal temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga Luisa
  • Bolivar, Juan M.
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal S.M.
  • Tacias-Pascacio, Veymar G.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Tuning Immobilized Enzyme Features by Combining Solid-Phase Physicochemical Modification and Mineralization

  • Guimarães, José R.
  • Carballares Navarro, Diego
  • Rocha Martín, Javier
  • Tardioli, Paulo W.
  • Fernandez Lafuente, Roberto
Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) were immobilized on octyl agarose. Then, the biocatalysts were chemically modified using glutaraldehyde, trinitrobenzenesulfonic acid or ethylenediamine and carbodiimide, or physically coated with ionic polymers, such as polyethylenimine (PEI) and dextran sulfate. These produced alterations of the enzyme activities have, in most cases, negative effects with some substrates and positive with other ones (e.g., amination of immobilized TLL increases the activity versus p-nitro phenyl butyrate (p-NPB), reduces the activity with R-methyl mandate by half and maintains the activity with S-isomer). The modification with PEI increased the biocatalyst activity 8-fold versus R-methyl mandelate. Enzyme stability was also modified, usually showing an improvement (e.g., the modification of immobilized TLL with PEI or glutaraldehyde enabled to maintain more than 70% of the initial activity, while the unmodified enzyme maintained less than 50%). The immobilized enzymes were also mineralized by using phosphate metals (Zn2+, Co2+, Cu2+, Ni2+ or Mg2+), and this affected also the enzyme activity, specificity (e.g., immobilized TLL increased its activity after zinc mineralization versus triacetin, while decreased its activity versus all the other assayed substrates) and stability (e.g., the same modification increase the residual stability from almost 0 to more than 60%). Depending on the enzyme, a metal could be positively, neutrally or negatively affected for a specific feature. Finally, we analyzed if the chemical modification could, somehow, tune the effects of the mineralization. Effectively, the same mineralization could have very different effects on the same immobilized enzyme if it was previously submitted to different physicochemical modifications. The same mineralization could present different effects on the enzyme activity, specificity or stability, depending on the previous modification performed on the enzyme, showing that these previous enzyme modifications alter the effects of the mineralization on enzyme features. For example, TLL modified with glutaraldehyde and treated with zinc salts increased its activity using R-methyl mandelate, while almost maintaining its activity versus the other unaltered substrates, whereas the aminated TLL maintained its activity with both methyl mandelate isomers, while it decreased with p-NPB and triacetin. TLL was found to be easier to tune than CALB by the strategies used in this paper. In this way, the combination of chemical or physical modifications of enzymes before their mineralization increases the range of modification of features that the immobilized enzyme can experienced, enabling to enlarge the biocatalyst library.