Pasar al contenido principal

SINTESIS Y CARACTERIZACION DE POLIURETANOS AUTORREPARABLES FOTORREACTIVOS MULTIFUNCIONALES Y DE SUS NANOCOMPOSITES PARA EL SECTOR DEL TRANSPORTE

MAT2013-48059-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable nanocomposites based on poly(ester-urethane) and nanosized hydroxyapatite: Plastificant and reinforcement effects

  • NAVARRO-BAENA, IVÁN
  • Arrieta, Marina Patricia
  • Sonseca Olalla, Agueda
  • Torre, Luigi
  • López, Daniel
  • Kenny, Jose Mª
  • PEPONI, LAURA
  • Giménez Torres, Enrique|||0000-0002-6330-0209
The processing and characterization of biodegradable nanocomposites based on poly(ester-urethane) reinforced with different amounts (0.5, 1 and 3 wt %) of nanosized hydroxyapatite (nHA) are reported. The selected poly(ester-urethane) was synthesized starting from a tri-block copolymer based on poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA). The nanocomposites were prepared by extrusion and by press molding. Several techniques were applied to investigate the properties of the nanocomposites. Electron microscopy revealed that the poly(ester-urethane) matrix is able to phase separate and that the addition of well-dispersed nanofillers modifies the dimension of the segregated phase. The thermal stability of the PU matrix, regulated by the PLLA block, decreased when low contents of nHA (0.5 and 1 wt %) were added, even if the thermal stability of the PCL-block was increased for each nHA amount. The good mechanical response of the nanocomposites confirmed the absence of agglomerates in the dispersion of the nanofillers in the polymeric matrix. The nHA presence also increased the surface hydrophilicity. Furthermore, rheology measurements, mechanical and thermal tests demonstrated the different behavior induced by the addition of nHA in different amounts. In fact, nHA acts as plasticizer at low concentrations (0.5, 1 wt %) and as reinforcement at a higher nHA amount (3 wt %). In vitro degradation tests were performed using a phosphate buffer solution. The results reported here are relevant for the development of nanocomposites based on a biodegradable and biocompatible polymeric matrix reinforced with small amounts of biocompatible nanofillers for different applications, especially in the biomedical field. (C) 2015 Elsevier Ltd. All rights reserved., We are indebted to the Spanish Ministry of Science and Innovation (MICINN) for their economic support of this research (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) as well as the Regional Government of Madrid (S2013/MIT-2862). LP acknowledges also, the support of a JAEDoc grant from CSIC cofinanced by FSE. We thank the technical support of Prof. Juan Lopez Martinez from Universitat Politecnica de Valencia (Spain) for his assistance with water contact angle measurements, as well as Marco Rallini and Franco Dominici from the STM group of the University of Perugia for FE-SEM photographs and microextruder blending, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable electrospun bionanocomposite fibers based on plasticized PLA-PHB blends reinforced with cellulose nanocrystals

  • ARRIETA, Marina Patricia
  • López-Martínez, Juan
  • López, Daniel
  • Kenny, J.M.
  • Peponi, L.
[EN] Electrospun biobased and biodegradable nanocomposites for sustainable flexible films were developed. Poly(lactic acid) (PLA) was blended with 25 wt% of poly(hydroxybutyrate) (PHB) to produce bead-less fibers and plasticized with 15 wt% of acetyl(tributyl citrate) (ATBC) to obtain flexible materials. The system was further loaded with cellulose nanocrystals (CNC) in 1 wt% and 5 wt% to obtain bionanocomposites with improved thermal and mechanical resistance. The morphological, structural, thermal and mechanical performance of electrospun bionanocomposites was investigated. The effect of ATBC was characterized by a decrease of the glasstransition temperature and an increase in the elongation at break. Meanwhile, CNC improved the thermal and mechanical resistance of mats. Thus, good performance for the intended use was achieved for the bionanocomposite loaded with 1 wt% of CNC (PLA-PHB-ATBC-CNC1), which also showed appropriate surface water resistance. All electrospun bionanocomposites were fully disintegrated under composting conditions showing their possible applications as compostable flexible film materials. (C) 2015 Elsevier B.V. All rights reserved., Authors thank Spanish Ministry of Science and Innovation (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) and Regional Government of Madrid (S2013/MIT-2862). L.P. and M.P.A. acknowledge the “Ramon y Cajal” and the “Juan de la Cierva” contracts from the MINECO, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of flexible materials based on plasticized electrospun PLA PHB blends: Structural, thermal, mechanical and disintegration properties

  • ARRIETA, Marina Patricia
  • López. D.
  • Kenny, J. M.
  • Peponi, L.
  • López-Martínez, Juan|||0000-0001-6904-2282
In this work flexible PLA-PHB electrospun materials were developed by means of electrospinning technique. The processing parameters to obtain PLA-PHB electrospun fibers in different proportions (100:0; 75:25; 50:50, 25:75 and 0:100) were conditioned. A complete morphological, structural, thermal and mechanical characterization of the developed materials was conducted. The addition of PHB to PLA matrix, reduced considerably the formation of beads. PHB acts as nucleating agent for PLA in PLA-PHB blends. FTIR and Raman studies have showed interactions between PLA-PHB, mainly at proportion 75:25. The influence of the presence of plasticizer was also studied to obtain information on the possibility to use these thin mats as flexible films. Thus, PLA and PLA75-PHB25 electrospun mats were further plasticized with acetyl tri-n-butyl citrate (ATBC), which provoked an increase in elongation at break, achieving the ductility required for flexible films. The ternary system, PLA75-PHB25/ATBC, showed improved thermal stability due to the good interaction among three components. Disintegrability tests under composting conditions confirmed the biodegradable character of all electrospun mat formulations. Also, it was found that PHB slowed down the disintegration, while ATBC speeded it up. (C) 2015 Elsevier Ltd. All rights reserved., We are intended to the Spanish Ministry of Economy and Competitiveness (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) and to the Regional Government of Madrid (S2013/MIT-2862) for their economic support. LP acknowledges also, the support of JAEDoc grant from CSIC cofinanced by FSE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Humidity-activated shape memory effect on plasticized starch-based biomaterials

  • Sessini, Valentina
  • Arrieta, Marina P.
  • Fernández-Torres, Alberto
  • Peponi, Laura
Humidity-activated shape memory behavior of plasticized starch-based films reinforced with the innovative combination of starch nanocrystals (SNCs) and catechin as antioxidant were studied. In a previous work, we reported the processing of gelatinized starch-based films filled with SNCs and catechin as antioxidant agent, and we observed that this novel combination leads to starch-based film with enhanced thermal and mechanical performance. In this work, the humidity-activated shape memory behavior of the previous developed starch-based films was characterized. The moisture loss as well as the moisture absorption were studied since they are essential parameters in humidity-activated shape memory polymers to fix the temporary shape and to recover the original shape, respectively. Therefore, the effect of the incorporation of SNCs and catechin on the humidity-activated shape memory properties of plasticized starch was also studied. Moreover, the effectiveness of catechin to increase the polymer stability under oxidative atmosphere and the thermo-mechanical relaxation of all the starch-based materials were studied. The combination of plasticized starch matrix loaded with both, SNCs and catechin, leads to a multifunctional starch-based films with increased hydrophilicity and with excellent humidity-activated shape memory behavior with interest for potential biomedical applications., Authors thank Spanish Ministry of Economy and Competitiveness, MINECO, (MAT2013-48059-C2-1-R). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramón y Cajal (RYC-2014- 15595) contracts from MINECO, respectively. Authors thanks also CSIC for the I-LINK project, I-LINK1149., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable poly(ester-urethane) incorporated with catechin with shape memory and antioxidant activity for food packaging

  • Arrieta, Marina P.
  • Sessini, Valentina
  • Peponi, Laura
Biodegradable poly(ester-urethane) (PU) based on a tri-block copolymer of poly(L-lactic acid) and poly(ɛ-caprolactone), with shape-memory behaviour, and further loaded with catechin (Cat), as antioxidant agent, were developed with the dual objective to obtain a smart as well as an active material for food packaging purpose. Well dispersed catechin produced somewhat UV blocking effect, but slightly amber and red tonality. Catechin demonstrated positive interaction with PU matrix enhancing the interfacial adhesion and leading to a reduction in the surface wettability. The active PU composites, with thermally-activated shape memory ability at temperatures close to those required to pack thermally proceeded food (i.e. 40 °C), showed increased ability to recover the initial shape of the neat PU matrix. The antioxidant effectiveness of catechin released after the exposition to a fatty food simulant was proven after 10 days which represents the worst foreseeable conditions of the intended use. The disintegration process in composting conditions of the active PU-based materials was speeded up due to the catechin incorporation. The PU formulation loaded with low amount of catechin (1 wt% or 3 wt%) showed enough transparency, enhanced shape memory behaviour, improved water resistance, reduced UV-light transmission, right catechin release and effective antioxidant activity as well as appropriate disintegration in compost. Thus, active PU-Cat composites result very interesting as smart and active materials for biodegradable food packaging applications., Authors thank Spanish Ministry of Economy and Competitiveness, MINECO, (MAT2013-48059-C2-1-R) and Regional Government of Madrid (S2013/MIT-2862) for the financial support. M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINECO, respectively. Authors also thank Prof. Juan López Martínez (Universitat Politècnica de València, Spain) for his assistance in colourimetric and water contact angle measurements as well as Dr. Carolina López de Dicastillo (Universidad de Santiago de Chile) for her assistance with catechin powder colourimetric measurements, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Humidity-Activated Shape Memory Effects on Thermoplastic Starch/EVA Blends and Their Compatibilized Nanocomposites

  • Sessini, Valentina
  • Raquez, Jean-Marie
  • Lourdin, D.
  • Maigret, J. E.
  • Kenny, José María
  • Dubois, Philippe
  • Peponi, Laura
In this work, a systematic study on the humidity-activated shape memory properties of dual-responsive shape memory bionanocomposites with both humidity- and thermally-activated shape memory effects is reported. The study is performed through humidity-mechanical cycles in an Instron machine with a temperature chamber equipped with an ultrasonic humidity generator. In particular, the bionanocomposites studied are based on blends of ethylene–vinyl acetate (EVA) and thermoplastic starch reinforced with natural bentonite. In our previous work, thermomechanical cycles are performed by using EVA-induced crystallization and a preliminary humidity-activated shape memory test is designed. Herein, the shape memory results of both blends and their nanocomposites reflect the very good ability to humidity-activated recover of the initial shape with values higher than 80%. Moreover, the ability to fix the temporary shape of this systems is very good, especially when nanofillers are added. The compatibilizer effect of natural bentonite is demonstrated by means of different techniques such as scanning emission microscopy and mapping by confocal Raman spectroscopy., The authors are indebted to the Spanish Ministry of Economy, Industry and Competitiveness MINEICO (MAT2013-48059-C2-1-R) and to the Regional Government of Madrid (S2013/MIT-2862) for their economic support. L.P. acknowledges MINEICO for the “Ramon y Cajal” (RYC 2014–15595) contract. J.-M.R. and P.D. are grateful to the “Region Wallonne” and European Community (FEDER, FSE) in the excellence program OPTI2MAT for their financial support. UMONS thanks the “Belgian Federal Government Office Policy of Science (SSTC)” for general support in the frame of the PAI-7/05 and “Région Wallonne for financial support FEDER (LCFM_BIOMAT & BIORGEL). J.-M.R. is an FNRS-FRS research associate (Belgium). The authors thank CSIC for the I-LINK project, I-LINK1149., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation under composting conditions of lysine-modified polyurethane based on PCL obtained by lipase biocatalysis

  • Arrieta, Marina P.
  • Barrera Rivera, K. A.
  • Salgado, Cástor
  • Martínez Richa, Antonio
  • López García, Daniel
  • Peponi, Laura
Enzymatic polymerization has a large potential as an environmentally friendly synthetic process. Lipase is a renewable catalyst with high catalytic activity from which it is possible to develop a versatile method for the production of sustainable polyurethanes. In this work oligomeric PCL-diol was synthesized using biocatalysis with immobilized Yarrowia lipolytica lipase (YLL) and diethyleneglycol as initiator. Then, two different linear polyurethanes were prepared. One was obtained directly from the previous synthesized PCL-diol and hexamethylene diisocyanate, named PU, and the other one has been obtained by incorporating L-lysine amino acid as end group (lys-PU). PU and lys-PU disintegration under composting conditions was evaluated. The influence of the presence of L-lysine on the disintegration performance of PU was studied by evaluating the disintegration degree, monitoring the weight loss. Structural and morphological changes were followed by Fourier transformed infrared spectroscopy (FTIR) and by scanning electron microscopy (SEM)., Authors thank Spanish Ministry of Economy, Industry and Competitiveness, MINEICO, ( and MAT2013-48059-C2-1-R MAT2017-88123-P) cofinanced with FEDER funds, Regional Government of Madrid (S2013/MIT-2862) and Consejo Nacional de Ciencia y Tecnología (CONACYT, Grant 153922) for the financial support. M.P. Arrieta and L. Peponi acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINECO, respectively. Authors also acknowledge Prof. Juan López Martínez (Universitat Politécnica de Valencia, Spain) for his assistance with colorimetric measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photo-crosslinkable polyurethanes reinforced with coumarin modified silica nanoparticles for photo-responsive coatings

  • Salgado, Cástor
  • Arrieta, Marina P.
  • Peponi, Laura
  • López García, Daniel
  • Fernández-García, Marta
Coumarin and poly-ε-(caprolactone) diol (PCL)-based polyurethanes (PUs), were reinforced with modified silica nanoparticles (mSiNPs), in which a novel coumarin molecule was synthetized. The behavior as photo-responsive coatings of these materials was studied. The silica nanoparticles (SiNPs) modification was analyzed by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and UV spectroscopy. The yield of photo-crosslinking in nanocomposites loaded with mSiNPs was studied by UV–vis spectroscopy, which showed higher conversion degree than nanocomposites with unmodified SiNPs and non-reinforced PUs. The dispersion of mSiNPs on segregated microdomains was observed by transmission electron microscopy (TEM). The presence of coumarin grafted on the SiNPs surface (mSiNPs) leads to an improvement on the thermal stability of PU matrix. Meanwhile, they were able to maintain the mechanical performance before and after the irradiation process mainly due to the improved nanofiller-matrix interaction. Contact angle measurements were also assayed to study the hydrophobicity changes on the surface of modified nanocomposites. The observed phase segregation was associated with the mechanical and thermal properties of the materials and the photo-crosslinking of coumarin moieties bring to the final material high responsiveness to be employed as photo-switchable coatings., Authors thank Spanish Ministry of Economy, Industry and Competitiveness, MINEICO (MAT2013-48059-C2-1-R) and Regional Government of Madrid (S2013/MIT-2862). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC- 2014-15595) contracts from the MINEICO, respectively. Authors specially thank Dr. Emilio Rayón and Prof. Juan López Martínez (Universitat Politècnica de València, Spain) for TEM analysis, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exchange bias in sputtered FeNi/FeMn systems: effect of short low-temperature heat treatments

  • Savin, Peter
  • Guzmán, Jorge
  • Lepalovskij, Vladimir
  • Svalov, Andrey
  • Kurlyandskaya, Galina
  • Asenjo Barahona, Agustina
  • Vas'Kovskiy, Vladimir
  • Vázquez Villalabeitia, Manuel
Short (5 min) post-deposition thermal treatments under magnetic field at low temperature (up to 200 °C) performed in exchange-coupled FeNi(40 nm)/FeMn(20 nm) bilayer thin films prepared by magnetron sputtering are shown to be effective to significantly modify their exchange field (from around 40 Oe down to 27 Oe) between FeNi and FeMn layers. A similar exchange field decrease was observed for the first deposited FeNi layer of the FeNi(40 nm)/FeMn(20 nm)/FeNi(40 nm) trilayer films after the same thermal treatments. The exchange field value for the second FeNi layer was not substantially changed. The X-ray diffraction patterns indicates that such a heat treatment has no effect on the grain size and crystalline texture of the films, while atomic force microscope studies reveal an increase of the surface roughness after the treatment which is more noticeable in the case of the trilayer film. Analysis of the experimental results leads us to conclude that the variations of the exchange field after heat treatment are likely caused by a modification of interfacial roughness and/or interfacial magnetic structure, but unlikely by the changes in the microstructure and/or changes of composition of the antiferromagnetic FeMn layer., This work was supported by the Ministry of Education and Science of the Russian Federation (Project No. 1362), and ACTIMAT project of Etortek program of the Basque Government and UPV-EHU. Support from Spanish MINECO under project MAT2013-48059-C2-1-R is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Negative dissipation gradients in hysteretic materials

  • Jaafar, Miriam
  • Iglesias-Freire, Óscar
  • García-Mochales, Pedro
  • Sáenz, Juan José
  • Asenjo Barahona, Agustina
Measuring energy dissipation on the nanoscale is of great interest not only for nanomechanics but also to understand important energy transformation and loss mechanisms that determine the efficiency of energy of data storage devices. Fully understanding the magnetic dynamics and dissipation processes in nanomagnets is of major relevance for a number of basic and applied issues from magnetic recording to spin-based sensor devices to biomedical magnetic-based hyperthermia treatments. Here we present experimental evidence for a counter-intuitive monotonical reduction of energy dissipation as the interaction between two nanomagnets is enhanced. This behavior, which takes place when spins are parallel, can be understood in terms of hysteresis phenomena involved in the reorientation of these spins. The measured magnetic losses of about a few femtowatts are in agreement with quasi-static micromagnetic numerical simulations., We gratefully acknowledge funding from projects CSD2010-00024 and MAT2013-48059 (MINECO).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid biocomposites based on poly(lactic acid) and silica aerogel for food packaging applications

  • Aragón-Gutiérrez, Alejandro
  • Arrieta, Marina P.
  • López-González, Mar
  • Fernández-García, Marta
  • López García, Daniel
Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four dierent proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against dierent gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector., This research was funded by the Spanish Ministry of Economy, Industry, and Competitiveness (MINEICO) (MAT2013-48059-C2-1-R, MAT2016-78437-R and MAT2016-81001-P)
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Humidity-activated shape memory effect on plasticized starch-based biomaterials

  • Sessini, Valentina|||0000-0003-1205-4586
  • Arrieta, Marina Patricia
  • Fernandez-Torres, Alberto
  • Peponi, Laura
Humidity-activated shape memory behavior of plasticized starch-based films reinforced with the innovative combination of starch nanocrystals (SNCs) and catechin as antioxidant were studied. In a previous work, we reported the processing of gelatinized starch-based films filled with SNCs and catechin as antioxidant agent, and we observed that this novel combination leads to starch-based film with enhanced thermal and mechanical performance. In this work, the humidity-activated shape memory behavior of the previous developed starch-based films was characterized. The moisture loss as well as the moisture absorption were studied since they are essential parameters in humidity-activated shape memory polymers to fix the temporary shape and to recover the original shape, respectively. Therefore, the effect of the incorporation of SNCs and catechin on the humidity-activated shape memory properties of plasticized starch was also studied. Moreover, the effectiveness of catechin to increase the polymer stability under oxidative atmosphere and the thermo-mechanical relaxation of all the starch-based materials were studied. The combination of plasticized starch matrix loaded with both, SNCs and catechin, leads to a multifunctional starch-based films with increased hydrophilicity and with excellent humidity-activated shape memory behavior with interest for potential biomedical applications., Ministerio de Economía y Competitividad