Pasar al contenido principal

SUPERFICIES ANTIADHERENTES EN APLICACIONES QUE REQUIEREN CONTACTO PROLONGADO CON FLUIDOS

MAT2016-81001-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-Free and Scalable Procedure to Prepare PYR13TFSI/LiTFSI/PVDF–HFP Thermoplastic Electrolytes with Controlled Phase Separation and Enhanced Li Ion Diffusion

  • Gregorio, Víctor
  • García, Nuria
  • Tiemblo, Pilar
Solid electrolytes for Li transport have been prepared by melt-compounding in one single step. Electrolytes are composed of polyvinylidene fluoride–hexafluoropropylene (PVDF–HFP) with PYR13TFSI on its own or with varying concentration of LiTFSI. While the extrusion of PVDF–HFP with PYR13TFSI is possible up to relatively high liquid fractions, the compatibility of PVDF–HFP with LiTFSI/PYR13TFSI solutions is much lower. An organo-modified sepiolite with D-α-tocopherol polyethylene glycol 1000 succinate (TPGS-S) can be used to enhance the compatibility of these blends and allows to prepare homogeneous PYR13TFSI/LiTFSI/PVDF–HFP electrolytes with controlled microphase separations by melt-compounding. The structure and morphology of the electrolytes has been studied by FTIR, differential scanning calorimetry (DSC), SEM, and AFM. Their mechanical properties have been studied by classical strain–stress experiments. Finally, ionic conductivity has been studied in the −50 to 90 °C temperature range and in diffusivity at 25 °C by PFG-NMR. These electrolytes prove to have a microphase-separated morphology and ionic conductivity which depends mainly on their composition, and a mechanical behavior typical of common thermoplastic polymers, which makes them very easy to handle. Then, in this solvent-free and scalable fashion, it is possible to prepare electrolytes like those prepared by solvent casting, but in few minutes instead of several hours or days, without solvent evaporation steps, and with ionic conductivities, which are very similar for the same compositions, above 0.1 mS·cm<sup>−1</sup> at 25 °C. In addition, some of the electrolytes have been prepared with high concentration of Li ion, what has allowed the anion exchange Li transport mechanism to contribute significantly to the overall Li diffusivity, making <i>D<sub>Li</sub></i> become similar and even clearly greater than <i>D<sub>TFSI</sub></i>., This research was funded by the Spanish Ministry (Grant no: MAT2016-81001-P), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Gas Permeability of Chemically Cross-Linked Polynorbornene Dicarboximides Bearing Fluorinated Moieties

  • Aranda-Suárez, I.
  • Corona-García, C.
  • Santiago, A.A.
  • López Morales, S.
  • López-González, Mar
  • Vargas, Joel
This work reports on the synthesis of a novel bifunctional norbornene dicarboximide monomer (HFDA) based on 4,4′-(hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline and its application as a cross-linking agent in the ring-opening metathesis polymerization (ROMP) with N-3-trifluoromethylphenyl-exo,endo-norbornene-5,6-dicarboximide (mCF ) employing the Grubbs 2nd generation catalyst (I) and cis-1,4-diacetoxy-2-butene as a chain transfer agent (CTA) to yield a series of soluble nonlinear highly branched chains polymers with increasing degree of cross-linking. A comparative study of gas transport in membranes based on these cross-linked polynorbornene dicarboximides is performed and the gases studied are hydrogen, oxygen, nitrogen, carbon dioxide, methane, ethylene, and propylene. It is found that cross-linking increases the gas permeability, leads to the highest separation factor reported to date for the H /C H mixture in this kind of polymers, and also enhances the CO plasticization resistance up to 14 atm upstream pressure. The chemical cross-linking approach employed in this research is an effective tool to enhance gas transport properties for dense polynorbornene dicarboximide membranes., The authors thank CONACyT for the generous support with contract 239947. Financial support from DGAPA-UNAM PAPIIT through projects IA101817, IA101317, and MAT2016-81001-P from the Ministerio de Economía y Competitividad (MINECO) is gratefully acknowledged. The authors are grateful to Gerardo Cedillo Valverde, Karla Eriseth Reyes Morales, Adriana Tejeda Cruz, and Eliezer Hernández Mecinas for their assistance in NMR, thermal properties, X-ray diffraction measurements, and mechanical properties, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-Term Underwater Hydrophobicity: Exploring Topographic and Chemical Requirements

  • Martínez-Gómez, Aránzazu
  • Lopez, Silvia
  • García Ramón, María Teresa
  • Francisco, Raquel de
  • Tiemblo, Pilar
  • García, Nuria
A family of hybrid organoinorganic silica-based particles with varied chemical natures and morphologies has been synthesized to test their ability to develop coatings with underwater hydrophobicity. The particles were characterized by elemental microanalysis, scanning electron microscopy, and dynamic light scattering to evaluate the organic content, observe the morphology, and estimate the aggregate size, respectively. These morphologies were transferred into surface topographies by spraycoating dispersions made from the particles onto glass supports, resulting in coatings with an ample range of profiles and roughness but all of them being superhydrophobic. Atomic force microscopy and optical profilometry were used to map the coating surfaces and analyze the topography. Then, underwater hydrophobicity endurance was tested by immersion under a 2 cm 20 degrees C water column perpendicular to circular glass supports coated with the particles. The so-called mirror effect derived from the occurrence of the primary plastron (continuous air layer occluded between the surface and the water) was observed on the surface of all of the coatings tested. Apart from the dependency of plastrons on the water temperature and substrate shape, the plastron quality and lifetime is notably different depending on the particle morphology and thus on the coating topography. These experiments have demonstrated that the most persistent mirror effects, and therefore underwater superhydrophobicity, were produced on coatings that exhibited the smoothest topographies at the micrometric scale. In addition, these particle-only coatings can be made mechanically stable and robust by blending with a polymer matrix., The authors would like to acknowledge funding from the Spanish Ministry (MAT2016-81001-P). We are in debt to Dr. Julián Jiménez from ICV-CSIC for his support in profilometry measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically Imprinted Polymer for Peptide Tag Recognition Based on an Oriented Surface Epitope Approach

  • Gómez-Arribas, L. N.
  • Darder, M. d. M.
  • García, Nuria
  • Rodríguez, Y.
  • Urraca, J. L.
  • Moreno-Bondi, M.C.
FLAG tag (DYKDDDDK) is a short peptide commonly used for the purification of recombinant proteins. The high price of the affinity columns and their limited reusability are a shortcoming for their widespread use in biotechnology applications. Molecularly imprinted polymers (MIPs) can circumvent some of the limitations of bioaffinity columns for such applications, including long-term stability, reusability, and cost. We report herein the synthesis of MIPs selective to the FLAG tag by hierarchical imprinting. Using the epitope imprinting approach, a 5-amino acid peptide DYKDC was selected as a template and was covalently immobilized on the surface of microporous silica beads, previously functionalized with different aminosilanes, namely, 3-(2-aminoethylamino)propyldimethoxymethylsilane, AEAPMS, and N-(2-aminoethyl)-2,2,4-trimethyl-1-aza-2-silacyclopentane, AETAZS. We investigated the effect of the type of silane on the production of homogeneous silane-grafted layers with the highest extent of silanol condensation as possible using 29Si CP/MAS NMR. We observed that the right orientation of the imprinted cavities can substantially improve analyte recoveries from the MIP. After template and silica removal, the DYKDC-MIPs were used as sorbents for solid-phase extraction (molecularly imprinted solid-phase extraction) of the FLAG peptide, showing that the polymer prepared with AETAZS-bound silica beads contained binding sites more selective to the tag (RMIP-AZA = 87.4% vs RNIP-AZA = 4.1%, n = 3, RSD ≤ 4.2%) than those prepared using AEAPMS (RMIP-DM = 73.4% vs RNIP-DM = 23.2%, n = 3, RSD ≤ 4.0%) as a functionalization agent. An extensive computational molecular modeling study was also conducted, shedding some light on the interaction mechanism between the FLAG peptide and the imprinted template in the binding cavities., This work was supported by the Spanish Ministry of Economy and Competitiveness (grant RTI2018-096410-B-C21). Wethank Prof. M. J. Torralvo for assistance with the N2adsorption experiments and the National Centre for Electron Microscopy and the Centre for Elemental Microanalysis(UCM, Madrid) for the technical support. N.G. thanks theSpanish Ministry of Economy and Competitiveness(MAT2016-81001-P project) and Dr. LevíLópez (Character-ization Service of ICTP-CSIC) for performing solid-stateNMR spectroscopy. Y.R. thanks Dr. Mihaly Mezei (Depart-ment of Pharmacological Sciences, Icahn School of Medicineat Mount Sinai) for critically reading the computational part ofthis manuscript and suggesting improvements. Computationswere supported in part through the computational resourcesand staffexpertise provided by the Scientific ComputingFacility at the Icahn School of Medicine at Mount Sinai.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid biocomposites based on poly(lactic acid) and silica aerogel for food packaging applications

  • Aragón-Gutiérrez, Alejandro
  • Arrieta, Marina P.
  • López-González, Mar
  • Fernández-García, Marta
  • López García, Daniel
Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four dierent proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against dierent gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector., This research was funded by the Spanish Ministry of Economy, Industry, and Competitiveness (MINEICO) (MAT2013-48059-C2-1-R, MAT2016-78437-R and MAT2016-81001-P)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composite films based on salicylic acid-layered zinc hydroxide and polyvinyl alcohol: Preparation, characterization, properties and potential applications

  • Ruiz, C. V.
  • López-González, Mar
  • Giraldo, O.
Composite films of Polyvinyl alcohol (PVA) and hybrid materials based on salicylic acid –layered zinc hydroxide acetate (ZHA-SA) using zinc hydroxide acetate (ZHA) as host matrix were obtained by the casting method. The resulting composite films were characterized by FT-IR, X-ray diffraction, scanning electron microscopy (SEM) and atomic force microscopy (AFM) evidencing the incorporation of the layered materials in PVA matrix with relatively smooth and orderly surfaces. A significant reduction in the crystallinity of neat PVA film and a slight increase in transport coefficients of oxygen through the composite films have been observed. This behaviour has been attributed to a high compatibility and adhesion between the fillers and polymeric matrix. Evaluation of the mechanical properties, in terms of stress, revealed that a low content of fillers (1.0 wt %) were able to increase the response of PVA composites by ~63% with the addition of ZHA, and ~45% with ZHA-SA. The results demonstrated the potential application of ZHA and ZHA-derived hybrid material in the preparation of multifunctional polymer composites to be used in packaging food systems., This research was funded by MINCIENCIAS (COLCIENCIAS) as financial support of the doctoral studies of Christhy V. Ruiz through announcement 647–2015. The authors also thank to the Polymeric Nanomaterials and HEMPOL groups of the Institute of Polymer Science and Technology (ICTP) for the FT-IR, SEM, and thermal characterization of the composite films, and M. Lopez-Gonz ´ ´ alez would like to thank the financial support from Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project PGC2018-095364-B-I00, and MAT2016-81001- P from the Ministerio de Economía y Competitividad (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Industrially viable method for producing all-polymer hydrophobic surfaces apt for slippery liquid-infused substrates

  • Afonso, Elisabet
  • Martínez-Gómez, Aránzazu
  • Tiemblo, Pilar
  • García, Nuria
For the sake of simplicity and scalability, we report a methodology to build a superhydrophobic textured upper layer on PVDF/PMMA blend films. The methodology is very easy to implement and does not need any fluorination as last step. In addition, it has been proved that this textured layer works as substrate for lubricant infused surfaces, with outstanding slippery properties. Knowing the importance of controlling the roughness profile to succeed in suitable wetting properties, we perform a thorough study of the roughness parameters by optical profilometry and establish their influence on the final wetting and slippery properties., The authors would like to acknowledge to the Spanish Ministry of Science and Innovation for funding (MAT2016-81001-P and PID2019- 109401 GB-I00). E.A. thanks to Spanish Ministry for the FPI Grant (BES- 2017-080057). The authors are in debt with Dr. J. Marco (IQFR-CSIC) and his team for XPS measurements and valuable discussions