Pasar al contenido principal

PROPIEDADES PLASMONICAS Y MAGNETICAS MEJORADAS EN REDES DE NANOESTRUCTURAS Y NANOPARTICULAS MULTIFUNCIONALES

PGC2018-097789-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An inverted honeycomb plasmonic lattice as an efficient refractive index sensor

  • Rodríguez-Álvarez, Javier
  • Gnoatto, Lorenzo
  • Martínez-Castells, Marc
  • Guerrero, Albert
  • Borrisé, Xavier
  • Fraile Rodríguez, Arantxa
  • Batlle, Xavier
  • Labarta, Amilcar
This article belongs to the Special Issue Plasmonic Nanostructures and Their Applications., We present an efficient refractive index sensor consisting of a heterostructure that contains an Au inverted honeycomb lattice as a main sensing element. Our design aims at maximizing the out-of-plane near-field distributions of the collective modes of the lattice mapping the sensor surroundings. These modes are further enhanced by a patterned SiO2 layer with the same inverted honeycomb lattice, an SiO2 spacer, and an Au mirror underneath the Au sensing layer that contribute to achieving a high performance. The optical response of the heterostructure was studied by numerical simulation. The results corresponding to one of the collective modes showed high sensitivity values ranging from 99 to 395 nm/RIU for relatively thin layers of test materials within 50 and 200 nm. In addition, the figure of merit of the sensor detecting slight changes of the refractive index of a water medium at a fixed wavelength was as high as 199 RIU−1. As an experimental proof of concept, the heterostructure was manufactured by a simple method based on electron beam lithography and the measured optical response reproduces the simulations. This work paves the way for improving both the sensitivity of plasmonic sensors and the signal of some enhanced surface spectroscopies., This research was funded by Spanish MINECO, grant number PGC2018-097789-B-I00, and the European Union FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deconvolution of Phonon Scattering by Ferroelectric Domain Walls and Point Defects in a PbTiO3Thin Film Deposited in a Composition-Spread Geometry

  • Bugallo, David
  • Langenberg, Eric
  • Ferreiro-Vila, Elías
  • Smith, Eva H.
  • Stefani, Christina
  • Batlle, Xavier
  • Catalán, Gustau
  • Domingo, Neus
  • Schlom, Darrell G.
  • Rivadulla, Francisco
We present a detailed analysis of the temperature dependence of the thermal conductivity of a ferroelectric PbTiO3 thin film deposited in a composition-spread geometry enabling a continuous range of compositions from ∼25% titanium deficient to ∼20% titanium rich to be studied. By fitting the experimental results to the Debye model we deconvolute and quantify the two main phonon-scattering sources in the system: ferroelectric domain walls (DWs) and point defects. Our results prove that ferroelectric DWs are the main agent limiting the thermal conductivity in this system, not only in the stoichiometric region of the thin film ([Pb]/[Ti] ≈ 1) but also when the concentration of the cation point defects is significant (up to ∼15%). Hence, DWs in ferroelectric materials are a source of phonon scattering at least as effective as point defects. Our results demonstrate the viability and effectiveness of using reconfigurable DWs to control the thermal conductivity in solid-state devices., This work received financial support from the Ministerio de Economía y Competitividad (Spain) under project nos. MAT2016-80762-R, PID2019-104150RB-100, and PGC2018-097789-B-I00, Xunta de Galicia (Centro Singular de Investigación de Galicia Accreditation 2019-2022, ED431G 2019/03), the European Union (European Regional Development Fund-ERDF), and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016-Project No. 734187-SPICOLOST. E.L. is a Serra Húnter Fellow (Generalitat de Catalunya). E.L. acknowledges funding received from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Skłodowska-Curie Actions: Individual Fellowship-Global Fellowship (ref. MSCA-IF-GF-708129). D.B. acknowledges financial support from MINECO (Spain) through an FPI fellowship (BES-2017-079688). The work at Cornell was supported by the Army Research Office under grant W911NF-16-1-0315. H.P. acknowledges support from the National Science Foundation [Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)] under Cooperative Agreement No. DMR-1539918.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imaging of Antiferroelectric Dark Modes in an Inverted Plasmonic Lattice

  • Rodríguez-Álvarez, Javier
  • Labarta, Amilcar
  • Idrobo, Juan Carlos
  • Dell'Anna, Rossana
  • Cian, Alessandro
  • Giubertoni, Damiano
  • Borrisé, Xavier
  • Guerrero, Albert
  • Perez Murano, Francesc X.
  • Fraile Rodríguez, Arantxa
  • Terradas-Batlle, Xavier
Plasmonic lattice nanostructures are of technological interest because of their capacity to manipulate light below the diffraction limit. Here, we present a detailed study of dark and bright modes in the visible and near-infrared energy regime of an inverted plasmonic honeycomb lattice by a combination of Au+ focused ion beam lithography with nanometric resolution, optical and electron spectroscopy, and finite-difference time-domain simulations. The lattice consists of slits carved in a gold thin film, exhibiting hotspots and a set of bright and dark modes. We proposed that some of the dark modes detected by electron energy-loss spectroscopy are caused by antiferroelectric arrangements of the slit polarizations with two times the size of the hexagonal unit cell. The plasmonic resonances take place within the 0.5-2 eV energy range, indicating that they could be suitable for a synergistic coupling with excitons in two-dimensional transition metal dichalcogenides materials or for designing nanoscale sensing platforms based on near-field enhancement over a metallic surface., This work was supported by Spanish ICTS Network MICRONANOFABS. The authors from Universitat de Barcelona thank the funding from Spanish MICIIN, grant numbers PGC2018-097789–B-I00 and PID2021-127397NB-I00, and the European Union FEDER funds. The EELS measurements were supported by the Center for Nanophase Materials Sciences (CNMS), which is a U.S. Department of Energy, Office of Science User Facility, and using instrumentation within ORNL’s Materials Characterization Core provided by UT-Batelle, LLC, under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy, and sponsored by the Laboratory Directed Research and Development Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U.S. Department of Energy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic vs. deterministic magnetic coding in designed cylindrical nanowires for 3D magnetic networks

  • Bran, Cristina
  • Saugar, Elías
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Aballe, Lucía
  • Foerster, Michael
  • Fraile Rodríguez, A.
  • Palmero, Ester M.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
[EN] Advances in cylindrical nanowires for 3D information technologies profit from intrinsic curvature that introduces significant differences with regards to planar systems. A model is proposed to control the stochastic and deterministic coding of remanent 3D complex vortex configurations in designed multilayered (magnetic/non-magnetic) cylindrical nanowires. This concept, introduced by micromagnetic simulations, is experimentally confirmed by magnetic imaging in FeCo/Cu multilayered nanowires. The control over the random/deterministic vortex states configurations is achieved by a suitable geometrical interface tilting of almost non-interacting FeCo segments with respect to the nanowire axis, together with the relative orientation of the perpendicular magnetic field. The proper design of the segments' geometry (e.g. tilting) in cylindrical nanowires opens multiple opportunities for advanced nanotechnologies in 3D magnetic networks., Spanish Ministry of Science and Innovation under Projects MAT2016-76824-C3-1-R, PID2019-108075RB-C31/ AEI / 10.13039/501100011033 and PGC2018-097789-B-I00 and the Regional Government of Madrid under Project S2018/NMT-4321 NANOMAGCOST-CM. LA and MF acknowledge project RTI2018-095303-B-C53., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An inverted honeycomb plasmonic lattice as an efficient refractive index sensor

  • Rodríguez-Álvarez, Javier|||0000-0001-5822-4013
  • Gnoatto, Lorenzo
  • Martínez-Castells, Marc
  • Guerrero, Albert
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Fraile Rodríguez, Arantxa|||0000-0003-2722-0882
  • Batlle, Xavier|||0000-0001-7897-2692
  • Labarta, Amílcar|||0000-0003-0904-4678
We present an efficient refractive index sensor consisting of a heterostructure that contains an Au inverted honeycomb lattice as a main sensing element. Our design aims at maximizing the out-of-plane near-field distributions of the collective modes of the lattice mapping the sensor surroundings. These modes are further enhanced by a patterned SiO layer with the same inverted honeycomb lattice, an SiO spacer, and an Au mirror underneath the Au sensing layer that contribute to achieving a high performance. The optical response of the heterostructure was studied by numerical simulation. The results corresponding to one of the collective modes showed high sensitivity values ranging from 99 to 395 nm/RIU for relatively thin layers of test materials within 50 and 200 nm. In addition, the figure of merit of the sensor detecting slight changes of the refractive index of a water medium at a fixed wavelength was as high as 199 RIU -1. As an experimental proof of concept, the heterostructure was manufactured by a simple method based on electron beam lithography and the measured optical response reproduces the simulations. This work paves the way for improving both the sensitivity of plasmonic sensors and the signal of some enhanced surface spectroscopies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Deconvolution of Phonon Scattering by Ferroelectric Domain Walls and Point Defects in a PbTiO3Thin Film Deposited in a Composition-Spread Geometry

  • Bugallo, David|||0000-0002-5636-9267
  • Langenberg, Eric|||0000-0002-6944-4713
  • Ferreiro-Vila, Elias|||0000-0002-2530-2414
  • Smith, Eva H.
  • Stefani, Christina|||0000-0002-8818-075X
  • Batlle, Xavier|||0000-0001-7897-2692
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Rivadulla, Francisco|||0000-0003-3099-0159
We present a detailed analysis of the temperature dependence of the thermal conductivity of a ferroelectric PbTiO3 thin film deposited in a composition-spread geometry enabling a continuous range of compositions from ∼25% titanium deficient to ∼20% titanium rich to be studied. By fitting the experimental results to the Debye model we deconvolute and quantify the two main phonon-scattering sources in the system: ferroelectric domain walls (DWs) and point defects. Our results prove that ferroelectric DWs are the main agent limiting the thermal conductivity in this system, not only in the stoichiometric region of the thin film ([Pb]/[Ti] ≈ 1) but also when the concentration of the cation point defects is significant (up to ∼15%). Hence, DWs in ferroelectric materials are a source of phonon scattering at least as effective as point defects. Our results demonstrate the viability and effectiveness of using reconfigurable DWs to control the thermal conductivity in solid-state devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Imaging of Antiferroelectric Dark Modes in an Inverted Plasmonic Lattice

  • Rodríguez-Álvarez, Javier|||0000-0001-5822-4013
  • Labarta, Amílcar|||0000-0003-0904-4678
  • Idrobo, Juan Carlos
  • Dell'Anna, Rossana|||0000-0001-7147-6127
  • Cian, Alessandro
  • Giubertoni, Damiano|||0000-0001-8197-8729
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Guerrero, Albert
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • Fraile Rodríguez, Arantxa|||0000-0003-2722-0882
  • Batlle, Xavier|||0000-0001-7897-2692
Plasmonic lattice nanostructures are of technological interest because of their capacity to manipulate light below the diffraction limit. Here, we present a detailed study of dark and bright modes in the visible and near-infrared energy regime of an inverted plasmonic honeycomb lattice by a combination of Au + focused ion beam lithography with nanometric resolution, optical and electron spectroscopy, and finite-difference time-domain simulations. The lattice consists of slits carved in a gold thin film, exhibiting hotspots and a set of bright and dark modes. We proposed that some of the dark modes detected by electron energy-loss spectroscopy are caused by antiferroelectric arrangements of the slit polarizations with two times the size of the hexagonal unit cell. The plasmonic resonances take place within the 0.5-2 eV energy range, indicating that they could be suitable for a synergistic coupling with excitons in two-dimensional transition metal dichalcogenides materials or for designing nanoscale sensing platforms based on near-field enhancement over a metallic surface.