Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric domain walls in PbTiO3 are effective regulators of heat flow at room temperature

  • Langenberg, Eric
  • Saha, Dipanjan
  • Holtz, Megan E.
  • Wang, Jian-Jun
  • Bugallo, David
  • Ferreiro-Vila, Elías
  • Paik, Hanjong
  • Hanke, Isabelle
  • Ganschow, Steffen
  • Muller, David A.
  • Chen, Long-Qing
  • Catalán, Gustau
  • Domingo, Neus
  • Malen, Jonathan
  • Schlom, Darrell G.
  • Rivadulla, Francisco
Achieving efficient spatial modulation of phonon transmission is an essential step on the path to phononic circuits using “phonon currents”. With their intrinsic and reconfigurable interfaces, domain walls (DWs), ferroelectrics are alluring candidates to be harnessed as dynamic heat modulators. This paper reports the thermal conductivity of single-crystal PbTiO3 thin films over a wide variety of epitaxial-strain-engineered ferroelectric domain configurations. The phonon transport is proved to be strongly affected by the density and type of DWs, achieving a 61% reduction of the room-temperature thermal conductivity compared to the single-domain scenario. The thermal resistance across the ferroelectric DWs is obtained, revealing a very high value (≈5.0 × 10–9 K m2 W–1), comparable to grain boundaries in oxides, explaining the strong modulation of the thermal conductivity in PbTiO3. This low thermal conductance of the DWs is ascribed to the structural mismatch and polarization gradient found between the different types of domains in the PbTiO3 films, resulting in a structural inhomogeneity that extends several unit cells around the DWs. These findings demonstrate the potential of ferroelectric DWs as efficient regulators of heat flow in one single material, overcoming the complexity of multilayers systems and the uncontrolled distribution of grain boundaries, paving the way for applications in phononics., This work has received financial support from Ministerio de Economia y Competitividad (Spain) under project no. MAT2016-80762-R, Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016-2019, ED431 G/09), the European Union (European Regional Development Fund-ERDF), and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016 project no. 734187-SPICOLOST. E.L. acknowledges the funding received from the European Union’s Horizon 2020 research and innovation program through the Marie Skłodowska-Curie Actions: Individual Fellowship-Global Fellowship (ref. MSCAIF-GF-708129). D.B. acknowledges financial support from MINECO (Spain) through an FPI fellowship (BES-2017- 079688). The work at Cornell was supported by the Army Research Office under grant W911NF-16-1-0315. H.P. acknowledges support from the National Science Foundation [Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)] under cooperative agreement no. DMR-1539918., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical softness of ferroelectric 180° domain walls

  • Stefani, Christina
  • Ponet, Louis
  • Shapovalov, Konstantin
  • Chen, Peng
  • Langenberg, Eric
  • Schlom, Darrell G.
  • Artyukhin, Sergey
  • Stengel, Massimiliano
  • Domingo, Neus
  • Catalán, Gustau
Using scanning probe microscopy, we measure the out-of-plane mechanical response of ferroelectric 180° domain walls and observe that, despite separating domains that are mechanically identical, the walls appear mechanically distinct—softer—compared to the domains. This effect is observed in different ferroelectric materials (LiNbO3, BaTiO3, and PbTiO3) and with different morphologies (from single crystals to thin films), suggesting that the effect is universal. We propose a theoretical framework that explains the domain wall softening and justifies that the effect should be common to all ferroelectrics. The lesson is, therefore, that domain walls are not only functionally different from the domains they separate, but also mechanically distinct., C. S. thanks BIST for the PREBIST Grant. This projecthas received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 754558. E. L. acknowledges the funding received from the European Union’s Horizon 2020 research and innovation program through the Marie Skłodowska-Curie Actions: Individual Fellowship-Global Fellowship (Ref. No. MSCA-IF-GF708129). M. S. and K. S. acknowledge the support of the European Research Council under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 724529), Ministerio de Economia, Industria y Competitividad through Grants No. MAT2016- 77100-C2-2-P and No. SEV-2015-0496, and the Generalitat de Catalunya (Grant No. 2017SGR 1506). G. C. acknowledge the support of the Ministerio de Economía, Industria y Competitividad, Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional and European Union through Grant No. MAT2016-77100-C2-1-P (MINECO/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical reading of ferroelectric polarization

  • Stefani, Christina
  • Langenberg, Eric
  • Cordero-Edwards, Kumara
  • Schlom, Darrell G.
  • Catalán, Gustau
  • Domingo, Neus
Flexoelectricity is a property of dielectric materials whereby they exhibit electric polarization induced by strain gradients; while this effect can be negligible at the macroscale, it can become dominant at the nanoscale, where strain gradients can turn out to be tremendous. Previous works have demonstrated that flexoelectricity coupled with piezoelectricity enables the mechanical writing of ferroelectric polarization. When considering ferroelectric materials with out-of-plane polarization, the coupling of piezoelectricity with flexoelectricity can insert a mechanical asymmetry to the system and enable the distinction of oppositely polarized domains, based on their nanomechanical response. Using atomic force microscopy and, more specifically, contact resonance techniques, the coupling of flexoelectricity to piezoelectricity can be exploited to mechanically read the sign of ferroelectric polarization in a non-destructive way. We have measured a variety of ferroelectric materials, from a single crystal to thin films, and domains that are polarized down always appear to be stiffer than oppositely polarized domains. In this article, we demonstrate experimentally that the phenomenon is size-dependent and strongly enhanced when the dimension of the material is reduced to nanoscale in thin films. Ultimately, we demonstrate how the sensitivity in mechanical reading of ferroelectric polarization can be improved by appropriately tuning the mechanical stiffness of the cantilevers., Financial support was obtained under projects from the Spanish Ministerio de Ciencia e Innovación (MICINN) under Project Nos. FIS2015-73932-JIN, MAT2016-77100-C2-1-P, PID2019-108573GB-C21, and PID2019-109931GB-I00. In addition, this work was partially funded by No. 2017-SGR-579 from the Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, Grant No. SEV-2017-0706). C.S. thanks BIST for the PREBIST Grant. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie (MSCA) Grant Agreement No. 754558. Finally, E.L. acknowledges the individual fellowship No. MSCA-IF-GF-708129. E.L. is a Serra Húnter Fellow. K.C-E. acknowledges the Division II of the Swiss National Science Foundation under Project No. 200021_178782.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ferroelectric Domain Walls in PbTiO3 Are Effective Regulators of Heat Flow at Room Temperature

  • Langenberg, Eric|||0000-0002-6944-4713
  • Saha, Dipanjan
  • Holtz, Megan E.
  • Wang, Jian-Jun
  • Bugallo, David|||0000-0002-5636-9267
  • Ferreiro-Vila, Elias|||0000-0002-2530-2414
  • Paik, Hanjong
  • Hanke, Isabelle
  • Ganschow, Steffen
  • Muller, David A.|||0000-0003-4129-0473
  • Chen, Long-Qing
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Malen, Jonathan|||0000-0003-4560-4476
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Rivadulla, Francisco|||0000-0003-3099-0159
Achieving efficient spatial modulation of phonon transmission is an essential step on the path to phononic circuits using "phonon currents". With their intrinsic and reconfigurable interfaces, domain walls (DWs), ferroelectrics are alluring candidates to be harnessed as dynamic heat modulators. This paper reports the thermal conductivity of single-crystal PbTiO thin films over a wide variety of epitaxial-strain-engineered ferroelectric domain configurations. The phonon transport is proved to be strongly affected by the density and type of DWs, achieving a 61% reduction of the roomerature thermal conductivity compared to the single-domain scenario. The thermal resistance across the ferroelectric DWs is obtained, revealing a very high value (≈5.0 × 10 K m W), comparable to grain boundaries in oxides, explaining the strong modulation of the thermal conductivity in PbTiO. This low thermal conductance of the DWs is ascribed to the structural mismatch and polarization gradient found between the different types of domains in the PbTiO films, resulting in a structural inhomogeneity that extends several unit cells around the DWs. These findings demonstrate the potential of ferroelectric DWs as efficient regulators of heat flow in one single material, overcoming the complexity of multilayers systems and the uncontrolled distribution of grain boundaries, paving the way for applications in phononics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain-Engineered Ferroelastic Structures in PbTiO3 Films and Their Control by Electric Fields

  • Langenberg, Eric|||0000-0002-6944-4713
  • Paik, Hanjong
  • Smith, Eva H.
  • Nair, Hari P.
  • Hanke, Isabelle
  • Ganschow, Steffen
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Schlom, Darrell G.|||0000-0003-2493-6113
We study the interplay between epitaxial strain, film thickness, and electric field in the creation, modification, and design of distinct ferroelastic structures in PbTiO thin films. Strain and thickness greatly affect the structures formed, providing a two-variable parameterization of the resulting self-assembly. Under applied electric fields, these strain-engineered ferroelastic structures are highly malleable, especially when a/c and a/a superdomains coexist. To reconfigure the ferroelastic structures and achieve self-assembled nanoscale-ordered morphologies, pure ferroelectric switching of individual c-domains within the a/c superdomains is essential. The stability, however, of the electrically written ferroelastic structures is in most cases ephemeral; the speed of the relaxation process depends sensitively on strain and thickness. Only under low tensile strain - as is the case for PbTiO on GdScO - and below a critical thickness do the electrically created a/c superdomain structures become stable for days or longer, making them relevant for reconfigurable nanoscale electronics or nonvolatile electromechanical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical softness of ferroelectric 180° domain walls

  • Stefani, Christina|||0000-0002-8818-075X
  • Ponet, Louis
  • Shapovalov, Konstantin|||0000-0002-7978-2986
  • Chen, Peng
  • Langenberg, Eric|||0000-0002-6944-4713
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Artyukhin, Sergey
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Catalan, Gustau|||0000-0003-0214-4828
Using scanning probe microscopy, we measure the out-of-plane mechanical response of ferroelectric 180° domain walls and observe that, despite separating domains that are mechanically identical, the walls appear mechanically distinct-softer-compared to the domains. This effect is observed in different ferroelectric materials (LiNbO3, BaTiO3, and PbTiO3) and with different morphologies (from single crystals to thin films), suggesting that the effect is universal. We propose a theoretical framework that explains the domain wall softening and justifies that the effect should be common to all ferroelectrics. The lesson is, therefore, that domain walls are not only functionally different from the domains they separate, but also mechanically distinct.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Deconvolution of Phonon Scattering by Ferroelectric Domain Walls and Point Defects in a PbTiO3Thin Film Deposited in a Composition-Spread Geometry

  • Bugallo, David|||0000-0002-5636-9267
  • Langenberg, Eric|||0000-0002-6944-4713
  • Ferreiro-Vila, Elias|||0000-0002-2530-2414
  • Smith, Eva H.
  • Stefani, Christina|||0000-0002-8818-075X
  • Batlle, Xavier|||0000-0001-7897-2692
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Rivadulla, Francisco|||0000-0003-3099-0159
We present a detailed analysis of the temperature dependence of the thermal conductivity of a ferroelectric PbTiO3 thin film deposited in a composition-spread geometry enabling a continuous range of compositions from ∼25% titanium deficient to ∼20% titanium rich to be studied. By fitting the experimental results to the Debye model we deconvolute and quantify the two main phonon-scattering sources in the system: ferroelectric domain walls (DWs) and point defects. Our results prove that ferroelectric DWs are the main agent limiting the thermal conductivity in this system, not only in the stoichiometric region of the thin film ([Pb]/[Ti] ≈ 1) but also when the concentration of the cation point defects is significant (up to ∼15%). Hence, DWs in ferroelectric materials are a source of phonon scattering at least as effective as point defects. Our results demonstrate the viability and effectiveness of using reconfigurable DWs to control the thermal conductivity in solid-state devices.