Pasar al contenido principal

-

FJCI-2015-23702

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the surface charge on the adsorption capacity of chromium(VI) of iron oxide magnetic nanoparticles prepared by microwave-assisted synthesis

  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Mazarío, Eva
Solid phase extraction using magnetic nanoparticles has represented a leap forward in terms of the improvement of water quality, preventing the contamination of industrial effluents from discharge in a more efficient and affordable way. In the present work, superparamagnetic iron oxide nanoparticles (MNP) with different surface charges are tested as nanosorbents for the removal of chromium(VI) in aqueous solution. Uniform magnetic nanoparticles (~12 nm) were synthesized by a microwave polyol-mediated method, and tetraethyl orthosilicate (TEOS) and (3-aminopropyl) triethoxysilane (APTES) were grafted onto their surface, providing a variation in the surface charge. The adsorptive process of chromium was evaluated as a function of the pH, the initial concentration of chromium and contact time. Kinetic studies were best described by a pseudo-second order model in all cases. TEOS@MNP barely removed the chromium from the media, while non-grafted particles and APTES@TEOS@MNP followed the Langmuir model, with maximum adsorption capacities of 15 and 35 mgCr/g, respectively. The chromium adsorption capacities abruptly increased when the surface became positively charged as the species coexisting at the experimental pH are negatively charged. Furthermore, these particles have proven to be highly efficient in water remediation due their 100% reusability after more than six consecutive adsorption/desorption cycles., This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, PGC2018-095642-B-I00 and Juan de la Cierva Formación FJCI-2015-23702., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superparamagnetic nanosorbent for water purification: Assessment of the adsorptive removal of lead and methyl orange from aqueous solutions

  • Gallo-Cordova, Álvaro
  • Lemus, J.
  • Palomares, F. Javier
  • Morales, María Del Puerto
  • Mazarío, Eva
[EN] The present study describes the preparation of 50.3 nm superparamagnetic nanosorbents with high surface area for the adsorptive removal of lead and methyl orange from water. This material is based on the surface modification of iron oxide superparamagnetic nanoparticles with a double-shell coating of mesoporous silica whose porosity was increased up to 570 m/g by the addition of a porogenic material and its calcination. The adsorptive performance of the nanosorbent was evaluated as a function of several parameters (e.g. solution pH, pollutant initial concentration, and contact time), concluding that pHs around 5 are needed to avoid precipitation of Pb as Pb(OH) and the equilibrium adsorption capacity is reached after 2 h in all cases. The experimental data on the adsorption capacity of lead and methyl orange onto the nanosorbent were fit to a pseudo-second order kinetic model and Langmuir isotherm model. The maximum adsorption capacity value increases from 35 up to 50 mg/g for lead removal with increasing nanosorbent surface area. Contrary, for methyl orange the maximum adsorption goes up to 240 mg/g, indicating a larger nanosorbent surface affinity for the organic matter that is able to diffuse through the silica pores as probed by the intraparticle diffusion model. In addition, we found an good reusability (100% recovering after 4 sorption/desorption cycles for methyl orange removal), which makes of this magnetic nanosorbent suitable for remediation technologies., This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, PIE-201760E007, MAT2016-80394-R, PGC2018-095642-B-I00 and Juan de la Cierva Formación FJCI-2015-23702
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights into the structural analysis of maghemite and (MFe2O4, M = Co, Zn) ferrite nanoparticles synthesized by a microwave-assisted polyol process

  • Gallo-Cordova, Álvaro
  • Espinosa, Ana
  • Serrano Rubio, Aída
  • Gutiérrez, Lucía
  • Menéndez, Nieves
  • Morales, María Del Puerto
  • Mazarío, Eva
[EN] The search for more efficient, scalable, reproducible and standardized synthesis methods able to control particle size and crystallinity is still a challenge in nanotechnology. The one-pot microwave-assisted polyol process has been optimized for the synthesis of well-defined ferrite nanoparticles. Highly uniform and crystalline γ-Fe2O3, CoFe2O4 and ZnFe2O4 nanoparticles, with diameters below 14 nm have been prepared by an easy and reproducible one-pot microwave-assisted heating procedure in a polyol medium. A pure single phase and cubic spinel structure were confirmed by powder X-ray diffraction and Raman spectroscopy. Depending on the metal precursors, nanoparticles display magnetic features from superparamagnetic behaviour (Fe- A nd Zn-ferrites) to ferrimagnetism (Co ferrite) at room temperature. The iron oxidation state of 3+ and its short-range order coordination were studied by XAS (X-ray absorption spectroscopy). External field Mössbauer spectra, recorded at low temperature, confirmed the ferrimagnetic order with a Fe3+ and M2+ partial cationic distribution within both the A and B sites in zinc and cobalt ferrite, respectively. According to these results, the ferrite stoichiometry was (Zn0.70Fe0.30)[Zn0.30Fe1.70]O4 and (Co0.28Fe0.72)[Co0.72Fe1.28]O4. This journal is, This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, MAT2017-86540-C4-1-R, RTI2018-095303-A-C52, and PGC2018-095642-B-I00. E. M. acknowledges financial support from the Juan de la Cierva Formación (FJCI-2015-23702) and to Comunidad de Madrid – Jóvenes Doctores project (SI1-PJI-2019-00366). L. G. acknowledges financial support from the Ramón y Cajal program (RYC-2014-15512). The authors would like to acknowledge the use of the Advanced Microscopy Laboratory (INA-Universidad de Zaragoza). A. S. and A. E. acknowledge financial support from the Comunidad de Madrid for the ‘‘Atracción de Talento Investigador’’ contracts (No. 2017-T2/IND5395 and 2018-T1/IND10058). A. E. is also grateful to the 2018/NMT-4321 and SEV-2016-0686 projects. The European Synchrotron (ESRF),Ministerio Español de Ciencia, Innovación y Universidades (MCIU) and Consejo Superior de Investigaciones Cientificas (CSIC) are acknowledged for the provision of synchrotron radiation facilities. We also thank the BM25- SpLine staff for the technical support beyond their duties.