Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the endocytosis mechanism of Zr-based metal-organic frameworks through linker functionalization

  • Orellana-Tavra, Claudia
  • Haddad, Salame
  • Marshall, Ross J.
  • Abánades Lázaro, Isabel
  • Boix, Gerard|||0000-0001-8431-4813
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Forgan, Ross S.
  • Fairen-Jimenez, David|||0000-0002-5013-1194
A critical bottleneck for the use of metal-organic frameworks (MOFs) as drug delivery systems has been allowing them to reach their intracellular targets without being degraded in the acidic environment of the lysosomes. Cells take up particles by endocytosis through multiple biochemical pathways, and the fate of these particles depends on these routes of entry. Here, we show the effect of functional group incorporation into a series of Zr-based MOFs on their endocytosis mechanisms, allowing us to design an efficient drug delivery system. In particular, naphthalene-2,6-dicarboxylic acid and 4,4'-biphenyldicarboxylic acid ligands promote entry through the caveolin -pathway, allowing the particles to avoid lysosomal degradation and be delivered into the cytosol and enhancing their therapeutic activity when loaded with drugs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Continuous one-step synthesis of porous M-XF6-based metal-organic and hydrogen-bonded frameworks

  • Guillerm, Vincent|||0000-0003-3460-223X
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Imaz, Inhar|||0000-0002-0278-1141
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) built up from connecting M-XF₆ pillars through N-donor ligands are among the most attractive adsorbents and separating agents for CO₂ and hydrocarbons today. The continuous, one-step spray-drying synthesis of several members of this isoreticular MOF family varying the anionic pillar (XF₆=[SiF₆]²⁻ and [TiF₆]²⁻), the N-donor organic ligand (pyrazine and 4,4'-bipyridine) and the metal ion (M=Co, Cu and Zn) is demonstrated here. This synthetic method allows them to be obtained in the form of spherical superstructures assembled from nanosized crystals. As confirmed by CO₂ and N₂ sorption studies, most of the M-XF₆-based MOFs synthesised through spray-drying can be considered "ready-to-use" sorbents as they do not need additional purification and time consuming solvent exchange steps to show comparable porosity and sorption properties with the bulk/single-crystal analogues. Stability tests of nanosized M-SiF₆-based MOFs confirm their low stability in most solvents, including water and DMF, highlighting the importance of protecting them once synthesised. Finally, for the first time it was shown that the spray-drying method can also be used to assemble hydrogen-bonded open networks, as evidenced by the synthesis of MPM-1-TIFSIX.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Composite Salt in Porous Metal-Organic Frameworks for Adsorption Heat Transformation

  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Adsorptive heat transformation systems such as adsorption thermal batteries and chillers can provide space heating and cooling in a more environmental friendly way. However, their use is still hindered by their relatively poor performances and large sizes due to the limited properties of solid adsorbents. Here, the spray-drying continuous-flow synthesis of a new type of solid adsorbents that results from combining metal-organic frameworks (MOFs), such as UiO-66, and hygroscopic salts, such as CaCl2 has been reported. These adsorbents, commonly named as composite salt in porous matrix (CSPM) materials, allow improving the water uptake capabilities of MOFs while preventing their dissolution in the water adsorbed; a common characteristic of these salts due to the deliquescence effect. It is anticipated that MOF-based CSPMs, in which the percentage of salt can be tuned, are promising candidates for thermal batteries and chillers. In these applications, it is showed that a CSPM made of UiO-66 and CaCl2 (38% w/w) exhibits a heat storage capacity of 367 kJ kg-1, whereas a second CSPM made of UiO-66 and CaCl2 (53% w/w) shows a specific cooling power of 631 W kg-1 and a coefficient of performance of 0.83, comparable to the best solid adsorbents reported so far.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Aqueous production of spherical Zr-MOF beads, via continuous-flow spray-drying

  • Camur, Ceren|||0000-0002-4475-0511
  • Troyano, Javier|||0000-0002-0213-8148
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Legrand, Alexandre
  • Farrusseng, David|||0000-0002-9093-4143
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Porous metal-organic frameworks (MOFs) are attracting great attention from industry, thanks to their myriad potential applications in areas such as catalysis and gas storage. Zr-MOFs (also known as UiO-type MOFs) are especially promising, owing to their large surface areas, high chemical versatility and remarkable hydrothermal, chemical and thermal stabilities. However, among the challenges currently precluding the industrial exploitation of MOFs is the lack of green methods for their synthesis. Herein we describe a continuous-flow spray-drying method for the simultaneous synthesis and shaping of spherical MOF microbeads in a mixture of water and acetic acid. We used this approach to build two archetypical Zr-MOFs: UiO-66-NH2 and Zr-fumarate. By tuning the concentration of acetic acid in water, we were able to produce, by a scalable process, UiO-66-NH2 and Zr-fumarate beads with SBET and water-sorption values comparable to the literature values obtained with other methods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spray drying for making covalent chemistry II, synthesis of covalent-organic framework superstructures and related composites

  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Camur, Ceren|||0000-0002-4475-0511
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Imaz, Inhar|||0000-0002-0278-1141
  • Zamora, Félix|||0000-0001-7529-5120
  • Maspoch, Daniel|||0000-0003-1325-9161
Here we report a method that combines the spray-drying technique with a dynamic covalent chemistry process to synthesize zero-dimensional, spherical and microscale superstructures made from the assembly of imine-based COF nanocrystals. This methodology also enables the integration of other functional materials into these superstructures forming COF-based composites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal Acetylacetonates as a Source of Metals for Aqueous Synthesis of Metal-Organic Frameworks

  • Camur, Ceren|||0000-0002-4475-0511
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Demand continues for environmentally sound, high-yielding processes for the large-scale production of metal-organic frameworks (MOFs). Here we describe the use of metal acetylacetonate complexes as an alternative source of metals for the aqueous synthesis of MOFs. We have synthesized several carboxylate-based Zr(IV)-(UiO-66-NH2, Zr-fumarate, UiO-66-(OH)2, UiO-66-COOH and UiO-66-(COOH)2), Fe(III)-(MIL-88A) and Al(III)-(CAU-10) porous MOFs from their corresponding metal acetylacetonates in good yields (typically.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Squaramide-IRMOF-16 analogue for catalysis of solvent-free, epoxide ring-opening tandem and multicomponent reactions

  • Vignatti Abellan, Claudia|||0000-0003-3462-0251
  • Luis-Barrera, Javier
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Imaz, Inhar|||0000-0002-0278-1141
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Maspoch, Daniel|||0000-0003-1325-9161
Tandem and multicomponent one-pot reactions are highly attractive because they enable synthesis of target molecules in a single reaction vessel. However, they are difficult to control, as they can lead to the formation of many undesired side-products. Herein we report the use of metal-organic framework (MOF) pores decorated with organocatalytic squaramide moieties to confine ring-opening epoxide reactions of diverse substrates. Controlled mono-addition or tandem reactions inside the pores yield 1,2-aminoalcohols or 1,2,2'-aminodialcohols, respectively, in good yields. In addition, this squaramide-functionalised MOF enables catalysis of higher-complexity multicomponent reactions such as the catalytic ring-opening of two different epoxides by a single amine to afford 1,2,2'-aminodialcohols.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CO2 optical sensor based on self-assembled metal-organic framework nanoparticles

  • Chocarro Ruiz, Blanca|||0000-0003-3835-9046
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Avci, Civan|||0000-0001-7202-7454
  • Calvo Lozano, Olalla|||0000-0001-5486-2237
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Lechuga, Laura M.|||0000-0001-5187-5358
The development of devices for sensing and monitoring CO levels is crucial for many fields such as food packaging and for human safety indoors. Herein the fabrication of an optical CO sensor by integration of a metal-organic framework (MOF) onto bimodal optical waveguides is reported. This sensor is constructed via self-assembly of a transparent film of zeolitic imidazolate framework-8 (ZIF-8) nanoparticles (size: 32 ± 5 nm) on the waveguides. The nanoZIF-8-based sensor exhibits a broad linear response, with limits of detection of 3130 ppm at room temperature and 774 ppm at 278 K. Furthermore, it is robust, selective, fast and reusable, and can be stored under humid conditions with no loss in performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New synthetic routes towards MOF production at scale

  • Rubio Martínez, Marta
  • Camur, Ceren|||0000-0002-4475-0511
  • Thornton, Aaron W.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Hill, Matthew R.
The potential commercial applications for metal organic frameworks (MOFs) are tantalizing. To address the opportunity, many novel approaches for their synthesis have been developed recently. These strategies present a critical step towards harnessing the myriad of potential applications of MOFs by enabling larger scale production and hence real-world applications. This review provides an up-to-date survey (212 references) of the most promising novel synthetic routes, i.e., electrochemical, microwave, mechanochemical, spray drying and flow chemistry synthesis. Additionally, the essential topic of downstream processes, especially for large scale synthesis, is critically reviewed. Lastly we present the current state of MOF commercialization with direct feedback from commercial players.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Postsynthetic covalent and coordination functionalization of rhodium(II)-based metal-organic polyhedra

  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Albalad, Jorge|||0000-0001-5850-6723
  • Grancha, Thais|||0000-0001-9591-1058
  • Imaz, Inhar|||0000-0002-0278-1141
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Larpent, Patrick
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic polyhedra (MOP) are ultrasmall (typically 1-4 nm) porous coordination cages made from the self-assembly of metal ions and organic linkers and are amenable to the chemical functionalization of its periphery; however, it has been challenging to implement postsynthetic functionalization due to their chemical instability. Herein, we report the use of coordination chemistries and covalent chemistries to postsynthetically functionalize the external surface of â‰2.5 nm stable Rh(II)-based cuboctahedra through their Rh-Rh paddlewheel units or organic linkers, respectively. We demonstrate that 12 N-donor ligands, including amino acids, can be coordinated on the periphery of Rh-MOPs. We used this reactivity to introduce new functionalities (e.g., chirality) to the MOPs and to tune their hydrophilic/hydrophobic characteristics, which allowed us to modulate their solubility in diverse solvents such as dichloromethane and water. We also demonstrate that all 24 organic linkers can be postsynthetically functionalized with esters via covalent chemistry. In addition, we anticipate that these two types of postsynthetic reactions can be combined to yield doubly functionalized Rh-MOPs, in which a total of 36 new functional molecules can be incorporated on their surfaces. Likewise, these chemistries could be synergistically combined to enable covalent functionalization of MOPs through new linkages such as ethers. We believe that both reported postsynthetic pathways can potentially be used to engineer Rh-MOPs as scaffolds for applications in delivery, sorption, and catalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Zigzag ligands for transversal design in reticular chemistry, unveiling new structural opportunities for metal-organic frameworks

  • Guillerm, Vincent|||0000-0003-3460-223X
  • Grancha, Thais|||0000-0001-9591-1058
  • Imaz, Inhar|||0000-0002-0278-1141
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we describe the topological influence of zigzag ligands in the assembly of Zr(IV) metal-organic frameworks (MOFs). Through a transversal design strategy using reticular chemistry, we were able to synthesize a family of isoreticular Zr(IV)-based MOFs exhibiting the bcu - rather than the fcu - topology. Our findings underscore the value of the transversal parameter in organic ligands for dictating MOF architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible thermochromic polymeric thin films made of ultrathin 2D crystals of coordination polymers based on copper(I)-thiophenolates

  • Troyano, Javier|||0000-0002-0213-8148
  • Castillo, Óscar
  • Martínez, José I.
  • Fernández-Moreira, Vanesa
  • Ballesteros, Yolanda
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Zamora, Félix|||0000-0001-7529-5120
  • Delgado, Salomé
A one-pot reaction between Cu(BF)·xHO and 4-mercaptobenzoic acid in acetone or methanol gives rise to the formation of lamellar microcrystals of two Cu(I)-thiophenolate-based coordination polymers (CPs) with the formulas [CuCT] (1) (CT = 4-carboxy-thiophenolate) and [CuMCT] (2) (MCT = 4-methoxycarbonyl-thiophenolate). Both 1 and 2 show a reversible luminescent thermochromic behavior upon cooling, changing their color from pale yellow to green to orange in the case of 1, and from pale orange to green in the case of 2. It is shown that the lamellar character of these crystals, which exhibit micrometer lateral dimensions and sub-micrometer/nanometer thicknesses, allows processing them with an organic polymer such as polyvinylidene difluoride (PVDF) to form thermochromic 1@PVDF and 2@PVDF thin films. These thermal stimuli-responsive thin films are freestanding, free of macroscopic defects, and robust under mechanical bending stress, opening up the possibility to use them in, for example, 2D imaging sensor films.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sequential deconstruction-reconstruction of metal organic frameworks, an alternative strategy for synthesizing (multi)-layered ZIF composites

  • Avci, Civan|||0000-0001-7202-7454
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Tarrés Schüler, Màrius
  • Bernoud, Elise
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Imaz, Inhar|||0000-0002-0278-1141
  • Ribas, Xavi|||0000-0002-2850-4409
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the synthesis of (multi)-layered zeolitic imidazolate framework (ZIF-8/-67) composite particles via a sequential deconstruction-reconstruction process. We show that this process can be applied to construct ZIF-8-on-ZIF-67 composite particles whose cores are the initially etched particles. In addition, we demonstrate that introduction of functional inorganic nanoparticles (INPs) onto the crystal surface of etched particles does not disrupt ZIF particle reconstruction, opening new avenues for designing (multi)-layered ZIF-on-INP-on-ZIF composite particles comprising more than one class of inorganic nanoparticles. In these latter composites, the location of the inorganic nanoparticles inside each single metal-organic framework particle as well as of their separation at the nanoscale (20 nm) is controlled. Preliminary results show that (multi)-layered ZIF-on-INP-on-ZIF composite particles comprising a good sequence of inorganic nanoparticles can potentially catalyze cascade reactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Coordinative Solubilizer Method to Fabricate Soft Porous Materials from Insoluble Metal-Organic Polyhedra

  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Craig, Gavin A.|||0000-0003-3542-4850
  • Larpent, Patrick
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Urayama, Kenji|||0000-0002-2823-6344
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Furukawa, Shuhei|||0000-0003-3849-8038
Porous molecular cages have a characteristic processability arising from their solubility, which allows their incorporation into porous materials. Attaining solubility often requires covalently bound functional groups that are unnecessary for porosity and which ultimately occupy free volume in the materials, decreasing their surface areas. Here, a method is described that takes advantage of the coordination bonds in metal-organic polyhedra (MOPs) to render insoluble MOPs soluble by reversibly attaching an alkyl-functionalized ligand. We then use the newly soluble MOPs as monomers for supramolecular polymerization reactions, obtaining permanently porous, amorphous polymers with the shape of colloids and gels, which display increased gas uptake in comparison with materials made with covalently functionalized MOPs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photothermal Activation of Metal-Organic Frameworks Using a UV-Vis Light Source

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) usually require meticulous removal of the solvent molecules to unlock their potential porosity. Herein, we report a novel one-step method for activating MOFs based on the photothermal effect induced by directly irradiating them with a UV-vis lamp. The localized light-to-heat conversion produced in the MOF crystals upon irradiation enables a very fast solvent removal, thereby significantly reducing the activation time to as low as 30 min and suppressing the need for time-consuming solvent-exchange procedures and vacuum conditions. This approach is successful for a broad range of MOFs, including HKUST-1, UiO-66-NH, ZIF-67, CPO-27-M (M = Zn, Ni, and Mg), Fe-MIL-101-NH, and IRMOF-3, all of which exhibit absorption bands in the light emission range. In addition, we anticipate that this photothermal activation can also be used to activate covalent organic frameworks (COFs).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The photothermal effect in MOFs, covalent post-synthetic modification of MOFs mediated by UV-Vis light under solvent-free conditions

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Boix, Gerard|||0000-0001-8431-4813
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the covalent post-synthetic modification (CPSM) of MOFs using the photothermal effect. Specifically, we subjected mixtures of a photothermally active MOF and another reagent to irradiation with a UV-Vis lamp. This caused the MOF to heat up, which in turn caused the other reagent to melt and subsequently react with the functional groups on the walls of the MOF pores. We have exploited this dual function of MOFs as both heater and host for CPSMs to achieve rapid formation of amides from the reaction of representative MOFs (UiO-66-NH or MIL-101-NH-(Al)) with anhydrides under solvent-free conditions. In addition, this approach enables more complex CPSMs in MOFs such as the formation of amides in UiO-66-NH by using an aldehyde through a cascade reaction.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Self-Folding Polymer Film Based on Swelling Metal-Organic Frameworks

  • Troyano, Javier|||0000-0002-0213-8148
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • León Reina, Laura
  • Imaz, Inhar|||0000-0002-0278-1141
  • Cabeza, Aurelio
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein, we exploit the well-known swelling behaviour of metal-organic frameworks (MOFs) to create a self-folding polymer film. Namely, we show that incorporating crystals of the flexible MOF MIL-88A into a polyvinylidene difluoride (PVDF) matrix affords a polymer composite film that undergoes reversible shape transformations upon exposure to polar solvents and vapours. Since the self-folding properties of this film correlate directly with the swelling properties of the MIL-88A crystals, it selectively bends to certain solvents and its degree of folding can be controlled by controlling the relative humidity. Moreover, it shows a shape-memory effect at relative humidity values from 60 % to 90 %. As proof of concept, we demonstrate that these composite films can lift cargo and can be used to assemble 3D structures from 2D patterns. Our strategy is a straightforward method for designing autonomous soft materials with folding properties that can be tuned by judicious choice of the constituent flexible MOF.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Size-selective encapsulation of C60 and C60-derivatives within an adaptable naphthalene-based tetragonal prismatic supramolecular nanocapsule

  • Garcia Simon, Cristina|||0000-0002-2227-3259
  • Monferrer, Alba
  • Garcia-Borràs, Marc|||0000-0001-9458-1114
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Costas, Miquel|||0000-0001-6326-8299
  • Ribas, Xavi|||0000-0002-2850-4409
A novel naphthalene-based 5·(BArF) capsule allows for the size-selective inclusion of C from fullerene mixtures. Its size selectivity towards C has been rationalized by its dynamic adaptability in solution that has been investigated by molecular dynamics. Additionally, 5·(BArF) encapsulates C -derivatives such as C -PCBM and N-methylpyrrolidine-C . The latter can be separated from C since 5·(BArF) displays distinct affinity for them.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Core-shell Au/CeO2 nanoparticles supported in UiO-66 beads exhibiting full CO conversion at 100 °c

  • Yazdi, Amirali|||0000-0001-9420-8504
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Alonso González, Amanda|||0000-0002-5749-7631
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Imaz, Inhar|||0000-0002-0278-1141
  • Font, Xavier|||0000-0003-4981-7436
  • Puntes, Víctor|||0000-0001-8996-9499
  • Maspoch, Daniel|||0000-0003-1325-9161
Hybrid core-shell Au/CeO nanoparticles (NPs) dispersed in UiO-66 shaped into microspherical beads are created using the spray-drying continuous-flow method. The combined catalytic properties of nanocrystalline CeO and Au in a single particle and the support and protective function of porous UiO-66 beads make the resulting composites show good performances as catalysts for CO oxidation (T = 72 °C; T = 100 °C) and recyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A MOF@COF Composite with Enhanced Uptake through Interfacial Pore Generation, Enhanced uptake in a MOF@COF composite by interfacial pore generation

  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Hernández Muñoz, José
  • Tarazona, Pedro
  • Imaz, Inhar|||0000-0002-0278-1141
  • Zamora, Félix|||0000-0001-7529-5120
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein, we describe a new class of porous composites comprising metal-organic framework (MOF) crystals confined in single spherical matrices made of packed covalent-organic framework (COF) nanocrystals. These MOF@COF composites are synthesized through a two-step method of spray-drying and subsequent amorphous (imine-based polymer)-to-crystalline (imine-based COF) transformation. This transformation around the MOF crystals generates micro- and mesopores at the MOF/COF interface that provide far superior porosity compared to that of the constituent MOF and COF components added together. We report that water sorption in these new pores occurs within the same pressure window as in the COF pores. Our new MOF@COF composites, with their additional pores at the MOF/COF interface, should have implications for the development of new composites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Confining Functional Nanoparticles into Colloidal Imine-Based COF Spheres by a Sequential Encapsulation-Crystallization Method

  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Puntes, Víctor|||0000-0001-8996-9499
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Zamora, Félix|||0000-0001-7529-5120
Here, a two-step method is reported that enables imparting new functionalities to covalent organic frameworks (COFs) by nanoparticle confinement. The direct reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in the presence of a variety of metallic/metal-oxide nanoparticles resulted in embedding of the nanoparticles in amorphous and non-porous imine-linked polymer organic spheres (NP@a-1). Post-treatment reactions of NP@a-1 with acetic acid under reflux led to crystalline and porous imine-based COF-hybrid spheres (NP@c-1). Interestingly, Au@c-1 and Pd@c-1 were found to be catalytically active.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Postsynthetic Selective Ligand Cleavage by Solid-Gas Phase Ozonolysis Fuses Micropores into Mesopores in Metal-Organic Frameworks

  • Guillerm, Vincent|||0000-0003-3460-223X
  • Xu, Heng
  • Albalad, Jorge|||0000-0001-5850-6723
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report a novel, ozone-based method for postsynthetic generation of mesoporosity in metal-organic frameworks (MOFs). By carefully selecting mixed-ligand Zr-fcu-MOFs based on organic ligand pairs in which one ligand has ozone-cleavable olefin bonds and the other ligand is ozone-resistant, we were able to selectively break the cleavable ligand via ozonolysis to trigger fusion of micropores into mesopores within the MOF framework. This solid-gas phase method is performed at room-temperature, and, depending on the cleavable ligand used, the resultant ligand-fragments can be removed from the ozonated MOF by either washing or sublimation. Compared to the corresponding highly microporous starting MOFs, the highly mesoporous product MOFs exhibit radically distinct gas sorption properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A First Cyclodextrin-Transition Metal Coordination Polymer

  • Xu, Heng
  • Rodríguez-Hermida, Sabina|||0000-0001-7671-9925
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
The synthesis, X-ray crystallographic structure, and water uptake measurements of the first coordination polymer made of a cyclodextrin and a transition metal ion (in this case, Cu) are shown. This coordination polymer is made by connecting paddle-wheel Cu units through a γ-cyclodextrin functionalized with eight carboxylate groups, is stable in water, and shows selective water-induced reversible structural transformations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The influence of the MOF shell thickness on the catalytic performance of composites made of inorganic (hollow) nanoparticles encapsulated into MOFs

  • Yazdi, Amirali|||0000-0001-9420-8504
  • Merkoçi, Florind|||0000-0002-4925-5317
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Imaz, Inhar|||0000-0002-0278-1141
  • Puntes, Víctor|||0000-0001-8996-9499
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report the encapsulation of hollow Pt or Pd nanoparticles into ZIF-8, making a series of composites in which the ZIF-8 shell thickness has been systematically varied. By using these composites as catalysts for the reduction of 4-nitrophenol and Eosin Y, we show that the MOF shell thickness plays a key role in the catalytic performance of this class of composites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Post-Synthetic Anisotropic Wet-Chemical Etching of Colloidal Sodalite ZIF Crystals

  • Avci, Civan|||0000-0001-7202-7454
  • Aríñez Soriano, Javier|||0000-0002-1873-1464
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Carbonell Fernández, Carlos
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Controlling the shape of metal-organic framework (MOF) crystals is important for understanding their crystallization and useful for myriad applications. However, despite the many advances in shaping of inorganic nanoparticles, post-synthetic shape control of MOFs and, in general, molecular crystals remains embryonic. Herein, we report using a simple wet-chemistry process at room temperature to control the anisotropic etching of colloidal ZIF-8 and ZIF-67 crystals. Our work enables uniform reshaping of these porous materials into unprecedented morphologies, including cubic and tetrahedral crystals, and even hollow boxes, by an acid-base reaction and subsequent sequestration of leached metal ions. Etching tests on these ZIFs reveal that etching occurs preferentially in the crystallographic directions richer in metal-ligand bonds; that, along these directions, the etching rate tends to be faster on the crystal surfaces of higher dimensionality; and that the etching can be modulated by adjusting the pH of the etchant solution.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of the Amide Groups in the CO2/N2 Selectivity of a Series of Isoreticular, Interpenetrated Metal-Organic Frameworks

  • Safarifard, Vahid|||0000-0003-4876-8257
  • Rodríguez-Hermida, Sabina|||0000-0001-7671-9925
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Imaz, Inhar|||0000-0002-0278-1141
  • Bigdeli, Mina
  • Tehrani, Alireza Azhdari
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Morsali, Ali|||0000-0002-1828-7287
  • Casco, Mirian E.
  • Silvestre Albero, Joaquín
  • Ramos Fernández, Enrique V.
  • Maspoch, Daniel|||0000-0003-1325-9161
Here we report the use of a pillaring strategy for the design and synthesis of three novel amide-functionalized metal-organic frameworks (MOFs), TMUs-22/-23/-24, isoreticular to the recently reported imine-functionalized TMU-6 and TMU-21 MOFs. An extensive study of their CO sorption properties and selectivity for CO over N, from single gas sorption isotherms to breakthrough measurements, revealed that not only the incorporation of amide groups but also their accessibility is crucial to obtain enhanced CO sorption and CO/N selectivity. Therefore, the MOF with more accessible amide groups (TMU-24) shows a CO/N selectivity value of ca. 10 (as revealed by breakthrough experiments), which is ca. 500% and 700% of the selectivity values observed for the other amide-containing (TMU-22 and TMU-23) and imine-containing (TMU-6 and TMU-21) MOFs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hetero-bimetallic paddlewheel clusters in coordination polymers formed by a water-induced single-crystal-to-single-crystal transformation

  • Albalad, Jorge|||0000-0001-5850-6723
  • Aríñez Soriano, Javier|||0000-0002-1873-1464
  • Vidal-Gancedo, José|||0000-0002-1853-9675
  • Lloveras Monserrat, Vega|||0000-0002-9653-3340
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Imaz, Inhar|||0000-0002-0278-1141
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(ii)-Zn(ii) and Cu(ii)-Ni(ii) paddlewheel units exhibiting a 1:1 metal ratio were created.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Template-free, surfactant-mediated orientation of self-assembled supercrystals of metal-organic framework particles

  • Avci, Civan|||0000-0001-7202-7454
  • Liu, Yang
  • Pariente, Jose Angel|||0000-0003-2649-9164
  • Blanco, Alvaro|||0000-0002-0015-4873
  • Lopez, Cefe
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Mesoscale self-assembly of particles into supercrystals is important for the design of functional materials such as photonic and plasmonic crystals. However, while much progress has been made in self-assembling supercrystals adopting diverse lattices and using different types of particles, controlling their growth orientation on surfaces has received limited success. Most of the latter orientation control has been achieved via templating methods in which lithographic processes are used to form a patterned surface that acts as a template for particle assembly. Herein, a template-free method to self-assemble (111)-, (100)-, and (110)-oriented face-centered cubic supercrystals of the metal-organic framework ZIF-8 particles by adjusting the amount of surfactant (cetyltrimethylammonium bromide) used is described. It is shown that these supercrystals behave as photonic crystals whose properties depend on their growth orientation. This control on the orientation of the supercrystals dictates the orientation of the composing porous particles that might ultimately facilitate pore orientation on surfaces for designing membranes and sensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the supramolecular isomerism of MOF-74 by controlling the synthesis conditions

  • Gheorghe, Andreea|||0000-0003-2137-2519
  • Imaz, Inhar|||0000-0002-0278-1141
  • Van Der Vlugt, Jarl Ivar
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Tanase, Stefania|||0000-0003-2830-1924
Supramolecular isomerism of metal-organic frameworks (MOFs) is known for several MOF structures, having direct implications on the properties of these materials. Although the synthesis of MOF isomers is mainly serendipitous in nature, achieving controlled formation of a target framework is highly relevant for practical applications. This work discusses the influence of additives and synthesis conditions on the formation of porous isomers containing Zn as nodes and 2,5-dihydroxy-1,4-benzenedicarboxylate (dobdc) as a linker. Using solvent mixtures containing strongly coordinated molecules, e.g. N,N'-dimethylformamide (DMF) and N-methylpyrrolidone (NMP), facilitates the formation of porous structures of type [Zn(dobdc)(S)]·yS (S = DMF, NMP) which are built from dinuclear Zn(O)(CO) secondary building units (SBUs) consisting of two different edge-sharing polyhedra with the Zn ions in a unsaturated coordinative environment. In the presence of water, the Zn dimers are converted to one-dimensional infinite Zn chains, in which the number of Zn-linker bonds increases, therefore giving a hydrolytically more stable coordination environment. The full characterization of the isomers as well as their conversion to the most stable isomer is presented.