Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous production of spherical Zr-MOF beads via continuous-flow spray-drying

  • Avci-Camur, Civan
  • Troyano, Javier
  • Pérez-Carvajal, Javier
  • Legrand, Alexandre
  • Farrusseng, David
  • Imaz, Inhar
  • Maspoch, Daniel
Porous metal–organic frameworks (MOFs) are attracting great attention from industry, thanks to their myriad potential applications in areas such as catalysis and gas storage. Zr-MOFs (also known as UiO-type MOFs) are especially promising, owing to their large surface areas, high chemical versatility and remarkable hydrothermal, chemical and thermal stabilities. However, among the challenges currently precluding the industrial exploitation of MOFs is the lack of green methods for their synthesis. Herein we describe a continuous-flow spray-drying method for the simultaneous synthesis and shaping of spherical MOF microbeads in a mixture of water and acetic acid. We used this approach to build two archetypical Zr-MOFs: UiO-66-NH2 and Zr-fumarate. By tuning the concentration of acetic acid in water, we were able to produce, by a scalable process, UiO-66-NH2 and Zr-fumarate beads with SBET and water-sorption values comparable to the literature values obtained with other methods., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R), the Catalan AGAUR (project 2014 SGR 80), the ERC under the EU-FP7 (ERC-Co 615954), and the EU Horizon 2020 Research and Innovation Programme PRODIA (grant agreement #685727). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grant SEV-2013-0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal acetylacetonates as a source of metals for aqueous synthesis of metal–organic frameworks

  • Avci-Camur, Civan
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Maspoch, Daniel
Demand continues for environmentally sound, high-yielding processes for the large-scale production of metal–organic frameworks (MOFs). Here we describe the use of metal acetylacetonate complexes as an alternative source of metals for the aqueous synthesis of MOFs. We have synthesized several carboxylate-based Zr(IV)-(UiO-66-NH2, Zr-fumarate, UiO-66-(OH)2, UiO-66-COOH and UiO-66-(COOH)2), Fe(III)-(MIL-88A) and Al(III)-(CAU-10) porous MOFs from their corresponding metal acetylacetonates in good yields (typically >85%) and, in some cases, at room temperature., This work was supported by the Spanish MINECO (project PN MAT2015-65354-C2-1-R); the Catalan AGAUR (project 2014 SGR 80); the ERC, under EU-FP7 (ERC-Co 615954); and the EU Horizon 2020 research and innovation programme PRODIA (grant agreement #685727). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under grant SEV-2013-0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photothermal activation of metal-organic frameworks using a UV-Vis light source

  • Espín, Jordi
  • Garzón-Tovar, Luis
  • Carné-Sánchez, Arnau
  • Imaz, Inhar
  • Maspoch, Daniel
Metal-organic frameworks (MOFs) usually require meticulous removal of the solvent molecules to unlock their potential porosity. Herein, we report a novel one-step method for activating MOFs based on the photothermal effect induced by directly irradiating them with a UV-vis lamp. The localized light-to-heat conversion produced in the MOF crystals upon irradiation enables a very fast solvent removal, thereby significantly reducing the activation time to as low as 30 min and suppressing the need for time-consuming solvent-exchange procedures and vacuum conditions. This approach is successful for a broad range of MOFs, including HKUST-1, UiO-66-NH2, ZIF-67, CPO-27-M (M = Zn, Ni, and Mg), Fe-MIL-101-NH2, and IRMOF-3, all of which exhibit absorption bands in the light emission range. In addition, we anticipate that this photothermal activation can also be used to activate covalent organic frameworks (COFs)., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R), the Catalan AGAUR (project 2014 SGR 80), the ERC under the EU FP7 (ERC-Co 615954), and European Union’s Horizon 2020 research and innovation programme under grant agreement No 685727. It was also funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV2013-0295. J.E. acknowledges the MINECO for the FPI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Squaramide‐IRMOF‐16 analogue for catalysis of solvent‐free, epoxide ring‐opening tandem and multicomponent reactions

  • Vignatti, Claudia
  • Luis-Barrera, Javier
  • Guillerm, Vincent
  • Imaz, Inhar
  • Mas-Ballesté, Rubén
  • Alemán, José
  • Maspoch, Daniel
Tandem and multicomponent one‐pot reactions are highly attractive because they enable synthesis of target molecules in a single reaction vessel. However, they are difficult to control, as they can lead to the formation of many undesired side‐products. Herein we report the use of metal‐organic framework (MOF) pores decorated with organocatalytic squaramide moieties to confine ring‐opening epoxide reactions of diverse substrates. Controlled mono‐addition or tandem reactions inside the pores yield 1,2‐aminoalcohols or 1,2,2′‐aminodialcohols, respectively, in good yields. In addition, this squaramide‐functionalised MOF enables catalysis of higher‐complexity multicomponent reactions such as the catalytic ring‐opening of two different epoxides by a single amine to afford 1,2,2′‐aminodialcohols., This work was supported by the Spanish MINECO (projects PN MAT2015‐65354‐C2‐1‐R and CTQ2015‐64561‐R), the Catalan AGAUR (project 2014 SGR 80), the ERC under the EU FP7 (ERC−Co 615954 and ERC‐CG 647550), and European Union's Horizon 2020 research and innovation programme under grant agreement No 685727. It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV‐2013‐0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterogeneous catalysts with programmable topologies generated by reticulation of organocatalysts into metal-organic frameworks: The case of squaramide

  • Broto-Ribas, Anna
  • Vignatti, Claudia
  • Jimenez-Almarza, Alicia
  • Luis-Barrera, Javier
  • Dolatkhah, Zahra
  • Gándara Barragán, Felipe
  • Imaz, Inhar
  • Mas-Ballesté, Rubén
  • Alemán, José
  • Maspoch, Daniel
A well-established strategy to synthesize heterogeneous, metal-organic framework (MOF) catalysts that exhibit nanoconfinement effects, and specific pores with highly-localized catalytic sites, is to use organic linkers containing organocatalytic centers. Here, we report that by combining this linker approach with reticular chemistry, and exploiting three-dimensioanl (3D) MOF-structural data from the Cambridge Structural Database, we have designed four heterogeneous MOF-based catalysts for standard organic transformations. These programmable MOFs are isoreticular versions of pcu IRMOF-16, fcu UiO-68 and pillared-pcu SNU-8X, the three most common topologies of MOFs built from the organic linker p,p’-terphenyldicarboxylic acid (tpdc). To synthesize the four squaramide-based MOFs, we designed and synthesized a linker, 4,4’-((3,4‐dioxocyclobut‐1‐ene‐1,2‐diyl)bis(azanedyil))dibenzoic acid (Sq_tpdc), which is identical in directionality and length to tpdc but which contains organocatalytic squaramide centers. Squaramides were chosen because their immobilization into a framework enhances its reactivity and stability while avoiding any self-quenching phenomena. Therefore, the four MOFs share the same organocatalytic squaramide moiety, but confine it within distinct pore environments. We then evaluated these MOFs as heterogeneous H-bonding catalysts in organic transformations: a Friedel-Crafts alkylation and an epoxide ring-opening. Some of them exhibited good performance in both reactions but all showed distinct catalytic profiles that reflect their structural differences., This work was supported by the Spanish MINECO (projects RTI2018-095622-B-I00 and RTI2018-095038-B-I00), the Catalan AGAUR (project 2017 SGR 238), the ERC under the EU FP7 (ERC−Co 615954), European Union’s Horizon 2020 research and innovation program under grant agreement No. 685727, and European Structural Funds (S2018/NMT-4367). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Continuous one-step synthesis of porous M-XF6-based metal-organic and hydrogen-bonded frameworks

  • Guillerm, Vincent|||0000-0003-3460-223X
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Imaz, Inhar|||0000-0002-0278-1141
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) built up from connecting M-XF₆ pillars through N-donor ligands are among the most attractive adsorbents and separating agents for CO₂ and hydrocarbons today. The continuous, one-step spray-drying synthesis of several members of this isoreticular MOF family varying the anionic pillar (XF₆=[SiF₆]²⁻ and [TiF₆]²⁻), the N-donor organic ligand (pyrazine and 4,4'-bipyridine) and the metal ion (M=Co, Cu and Zn) is demonstrated here. This synthetic method allows them to be obtained in the form of spherical superstructures assembled from nanosized crystals. As confirmed by CO₂ and N₂ sorption studies, most of the M-XF₆-based MOFs synthesised through spray-drying can be considered "ready-to-use" sorbents as they do not need additional purification and time consuming solvent exchange steps to show comparable porosity and sorption properties with the bulk/single-crystal analogues. Stability tests of nanosized M-SiF₆-based MOFs confirm their low stability in most solvents, including water and DMF, highlighting the importance of protecting them once synthesised. Finally, for the first time it was shown that the spray-drying method can also be used to assemble hydrogen-bonded open networks, as evidenced by the synthesis of MPM-1-TIFSIX.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Composite Salt in Porous Metal-Organic Frameworks for Adsorption Heat Transformation

  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Adsorptive heat transformation systems such as adsorption thermal batteries and chillers can provide space heating and cooling in a more environmental friendly way. However, their use is still hindered by their relatively poor performances and large sizes due to the limited properties of solid adsorbents. Here, the spray-drying continuous-flow synthesis of a new type of solid adsorbents that results from combining metal-organic frameworks (MOFs), such as UiO-66, and hygroscopic salts, such as CaCl2 has been reported. These adsorbents, commonly named as composite salt in porous matrix (CSPM) materials, allow improving the water uptake capabilities of MOFs while preventing their dissolution in the water adsorbed; a common characteristic of these salts due to the deliquescence effect. It is anticipated that MOF-based CSPMs, in which the percentage of salt can be tuned, are promising candidates for thermal batteries and chillers. In these applications, it is showed that a CSPM made of UiO-66 and CaCl2 (38% w/w) exhibits a heat storage capacity of 367 kJ kg-1, whereas a second CSPM made of UiO-66 and CaCl2 (53% w/w) shows a specific cooling power of 631 W kg-1 and a coefficient of performance of 0.83, comparable to the best solid adsorbents reported so far.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Aqueous production of spherical Zr-MOF beads, via continuous-flow spray-drying

  • Camur, Ceren|||0000-0002-4475-0511
  • Troyano, Javier|||0000-0002-0213-8148
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Legrand, Alexandre
  • Farrusseng, David|||0000-0002-9093-4143
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Porous metal-organic frameworks (MOFs) are attracting great attention from industry, thanks to their myriad potential applications in areas such as catalysis and gas storage. Zr-MOFs (also known as UiO-type MOFs) are especially promising, owing to their large surface areas, high chemical versatility and remarkable hydrothermal, chemical and thermal stabilities. However, among the challenges currently precluding the industrial exploitation of MOFs is the lack of green methods for their synthesis. Herein we describe a continuous-flow spray-drying method for the simultaneous synthesis and shaping of spherical MOF microbeads in a mixture of water and acetic acid. We used this approach to build two archetypical Zr-MOFs: UiO-66-NH2 and Zr-fumarate. By tuning the concentration of acetic acid in water, we were able to produce, by a scalable process, UiO-66-NH2 and Zr-fumarate beads with SBET and water-sorption values comparable to the literature values obtained with other methods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal Acetylacetonates as a Source of Metals for Aqueous Synthesis of Metal-Organic Frameworks

  • Camur, Ceren|||0000-0002-4475-0511
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Demand continues for environmentally sound, high-yielding processes for the large-scale production of metal-organic frameworks (MOFs). Here we describe the use of metal acetylacetonate complexes as an alternative source of metals for the aqueous synthesis of MOFs. We have synthesized several carboxylate-based Zr(IV)-(UiO-66-NH2, Zr-fumarate, UiO-66-(OH)2, UiO-66-COOH and UiO-66-(COOH)2), Fe(III)-(MIL-88A) and Al(III)-(CAU-10) porous MOFs from their corresponding metal acetylacetonates in good yields (typically.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spray drying for making covalent chemistry, postsynthetic modification of metal-organic frameworks

  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Rodríguez-Hermida, Sabina|||0000-0001-7671-9925
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Covalent postsynthetic modification (PSM) of metal-organic frameworks (MOFs) has attracted much attention due to the possibility of tailoring the properties of these porous materials. Schiff-base condensation betwecn an amine and an aldehyde is one of the most common reactions in the PSM of MOFs. Here, we report the use of the spray drying technique to perform this class of organic reactions, either betwecn discrete organic molecules or on the pore surfaces of MOFs, in a very fast (1-2 s) and continuous way. Using spray drying, we show the PSM of two MOFs, the amine-terminated UiO-66-NH and the aldehyde-terminated ZIF-90, achieving conversion efficiencies up to 20 and 42%, respectively. Moreover, we demonstrate that it can also be used to postsynthetically cross-link the aldehyde groups of ZIF-90 using a diamine molecule with a conversion efficiency of 70%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Squaramide-IRMOF-16 analogue for catalysis of solvent-free, epoxide ring-opening tandem and multicomponent reactions

  • Vignatti Abellan, Claudia|||0000-0003-3462-0251
  • Luis-Barrera, Javier
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Imaz, Inhar|||0000-0002-0278-1141
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Maspoch, Daniel|||0000-0003-1325-9161
Tandem and multicomponent one-pot reactions are highly attractive because they enable synthesis of target molecules in a single reaction vessel. However, they are difficult to control, as they can lead to the formation of many undesired side-products. Herein we report the use of metal-organic framework (MOF) pores decorated with organocatalytic squaramide moieties to confine ring-opening epoxide reactions of diverse substrates. Controlled mono-addition or tandem reactions inside the pores yield 1,2-aminoalcohols or 1,2,2'-aminodialcohols, respectively, in good yields. In addition, this squaramide-functionalised MOF enables catalysis of higher-complexity multicomponent reactions such as the catalytic ring-opening of two different epoxides by a single amine to afford 1,2,2'-aminodialcohols.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New synthetic routes towards MOF production at scale

  • Rubio Martínez, Marta
  • Camur, Ceren|||0000-0002-4475-0511
  • Thornton, Aaron W.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Hill, Matthew R.
The potential commercial applications for metal organic frameworks (MOFs) are tantalizing. To address the opportunity, many novel approaches for their synthesis have been developed recently. These strategies present a critical step towards harnessing the myriad of potential applications of MOFs by enabling larger scale production and hence real-world applications. This review provides an up-to-date survey (212 references) of the most promising novel synthetic routes, i.e., electrochemical, microwave, mechanochemical, spray drying and flow chemistry synthesis. Additionally, the essential topic of downstream processes, especially for large scale synthesis, is critically reviewed. Lastly we present the current state of MOF commercialization with direct feedback from commercial players.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photothermal Activation of Metal-Organic Frameworks Using a UV-Vis Light Source

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) usually require meticulous removal of the solvent molecules to unlock their potential porosity. Herein, we report a novel one-step method for activating MOFs based on the photothermal effect induced by directly irradiating them with a UV-vis lamp. The localized light-to-heat conversion produced in the MOF crystals upon irradiation enables a very fast solvent removal, thereby significantly reducing the activation time to as low as 30 min and suppressing the need for time-consuming solvent-exchange procedures and vacuum conditions. This approach is successful for a broad range of MOFs, including HKUST-1, UiO-66-NH, ZIF-67, CPO-27-M (M = Zn, Ni, and Mg), Fe-MIL-101-NH, and IRMOF-3, all of which exhibit absorption bands in the light emission range. In addition, we anticipate that this photothermal activation can also be used to activate covalent organic frameworks (COFs).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Heterogeneous catalysts with programmable topologies generated by reticulation of organocatalysts into metal-organic frameworks, The case of squaramide

  • Broto-Ribas, Anna|||0000-0002-9672-4526
  • Vignatti Abellan, Claudia|||0000-0003-3462-0251
  • Jiménez Almarza, Alicia|||0000-0001-6304-0200
  • Luis-Barrera, Javier
  • Dolatkhah, Zahra
  • Gándara, Felipe|||0000-0002-1671-6260
  • Imaz, Inhar|||0000-0002-0278-1141
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Maspoch, Daniel|||0000-0003-1325-9161
A well-established strategy to synthesize heterogeneous, metal-organic framework (MOF) catalysts that exhibit nanoconfinement effects, and specific pores with highly-localized catalytic sites, is to use organic linkers containing organocatalytic centers. Here, we report that by combining this linker approach with reticular chemistry, and exploiting three-dimensioanl (3D) MOF-structural data from the Cambridge Structural Database, we have designed four heterogeneous MOF-based catalysts for standard organic transformations. These programmable MOFs are isoreticular versions of pcu IRMOF-16, fcu UiO-68 and pillared-pcu SNU-8X, the three most common topologies of MOFs built from the organic linker p,p'-terphenyldicarboxylic acid (tpdc). To synthesize the four squaramide-based MOFs, we designed and synthesized a linker, 4,4'-((3,4-dioxocyclobut-1-ene-1,2-diyl)bis(azanedyil))dibenzoic acid (Sq_tpdc), which is identical in directionality and length to tpdc but which contains organocatalytic squaramide centers. Squaramides were chosen because their immobilization into a framework enhances its reactivity and stability while avoiding any self-quenching phenomena. Therefore, the four MOFs share the same organocatalytic squaramide moiety, but confine it within distinct pore environments. We then evaluated these MOFs as heterogeneous H-bonding catalysts in organic transformations: a Friedel-Crafts alkylation and an epoxide ring-opening. Some of them exhibited good performance in both reactions but all showed distinct catalytic profiles that reflect their structural differences.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Systematic study of the impact of MOF densification into tablets on textural and mechanical properties

  • Dhainaut, Jérémy|||0000-0002-1035-0114
  • Camur, Ceren|||0000-0002-4475-0511
  • Troyano, Javier|||0000-0002-0213-8148
  • Legrand, Alexandre
  • Canivet, J.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Reinsch, Helge|||0000-0001-5288-1135
  • Farrusseng, David|||0000-0002-9093-4143
Four different metal-organic framework powders (UiO-66, UiO-66-NH, UiO-67, and HKUST-1) were shaped into tablets. The effect of the applied pressure on porous properties, mechanical resistance and tablet bulk density is reported. We observe a linear relationship between densification and tensile strength for all four studied MOFs, with the slope being MOF-dependent. We also report conditions for improving significantly the volumetric uptake. Finally, we evaluated our tablets' stability over time in the presence of moisture.