Pasar al contenido principal

CHALLENGES IN INORGANIC MATERIALS FOR ENERGY APPLICATIONS

MAT2014-53500-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotexturing to enhance photoluminescent response of atomically thin indium selenide with highly tunable band gap

  • Brotons-Gisbert, Mauro
  • Hidalgo, Francisco
  • Tobias, Gerard
  • Canadell, Enric
  • Ordejón, Pablo
  • Martínez Pastor, Juan Pascual
  • Sánchez-Royo, Juan F.
Brotons-Gisbert, Mauro et al., Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density., This work was supported by the Spanish Government (Grant Nos. TEC2014-53727-C2-1-R and MAT2014-53500-R as well as Grants FIS2015-64886-C5-3-P and FIS2015-64886-C5-4-P), the Comunidad Valenciana Government (Grant No. PROMETEOII/ 2014/059), and the Generalitat de Catalunya Government (2014SGR301). The work at Berkeley was supported by National Science Foundation No. DMR-1306601. Authors thank the Central Support Service for Experimental Research (SCSIE) (SEM and Micro-PL facilities) of the University of Valencia. J.F.S.R. acknowledges financial support from the Mobility Program of VLC-CAMPUS. E.C., G.T., F.H., and P.O. acknowledge support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grants SEV-2015-0496 and SEV-2013-0295. F.H. acknowledges support of CONACYT. M.B.G. acknowledges his fellowship no. UVINV-PREDOC13-110538 under the program “Atracció de Talent, VLC-CAMPUS” of the University of Valencia. D.A.P. acknowledges his contract CPI-15-276 under the program PROMETEOII/2014/059., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Binary supercritical CO2 solvent mixtures for the synthesis of 3D metal-organic frameworks

  • López Periago, Ana M.
  • López-Domínguez, Pedro
  • Pérez Barrio, Jorge
  • Tobias, Gerard
  • Domingo, Concepción
Efficient and sustainable synthesis of MOFs, as nano or microcrystalline powder, is crucial for the development of new applications for these compounds. For this purpose, the synthesis of Zn2þ, Cu2þ and Fe3þ-based MOFs was attempted in this study by using a binary medium consisting of supercritical CO2 mixed with an ionic liquid (emimBF4 or emimBr). In comparison with conventional solvothermal and ionothermal synthesis, MOFs were herein obtained under mild reaction conditions, i.e. 200 bar and 65 C, after relatively short reaction periods (<10 h). To explore the described synthesis method as a generic procedure for the preparation of three-dimensional MOFs, different linkers of the imidazole and carboxylic acid families were tested. Widely investigated MOFs, such as ZIF-8 and HKUST-1, were prepared along with the complex mesoporous MIL-100(Fe). The structure and composition of the synthesized materials were determined by X-ray powder diffraction and elemental analysis. N2 adsorption at low temperature was used to assess the textural properties., This work was partially financed by the Spanish National Plan of Research CTQ2014-56324-CO2-P1 and MAT2014-53500-R, the Generalitat de Catalunya 2014SGR377 and Fundaci on Iberdrola. Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). A. L opez-Periago acknowledges the RyC-2012-11588 contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring different doping mechanisms in thermoelectric polymer/ carbon nanotube composites

  • Dörling, Bernhard
  • Sandoval, Stefania
  • Kankla, Pacharapon
  • Fuertes, Amparo
  • Tobias, Gerard
  • Campoy Quiles, Mariano
This work compares various methods to prepare polymer/carbon nanotube (CNT) composites for thermoelectric applications, focusing on the different doping mechanisms. We first look at the general trends observed in the Seebeck coefficient and power factor for a large number of composites as a function of electrical conductivity. Then we discuss two methods of nitrogen doping the carbon nanotubes in these composites, namely either during synthesis, or afterwards by ammonolysis. Finally, we discuss doping of the carbon nanotubes through charge transfer from the polymer counterpart, including photo-induced switching of the majority carrier type. As a general remark, we note that processability is negatively influenced by some doping procedures. Best results were achieved for unfunctionalized single-walled carbon nanotubes with a high content of semiconducting CNT species., The authors would like to thank Prof. Michael L. Chabinyc, Prof. Christian Müller and Prof. Alejandro R. Goñi for useful discussions. We are grateful to John D. Craddock, Prof. Matthew C. Weisen- berger and Prof. John E. Anthony for providing the n-MWCNTs. The authors would also like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), MAT2015- 70850-P and MAT2014-53500-R; and the European Research Council (ERC) under grant agreement no. 648901. S. Sandoval acknowledges a contract though PIE 201660E013 and P. Kankla the Development and Promotion of Science and Technology Talents Project (DPST). We are grateful to Thomas Swan Co. Ltd for supplying Elicarb1 SWCNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards safer sodium-ion batteries via organic solvent/ionic liquid based hybrid electrolytes

  • Monti, Damien
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
  • Johansson, Patrik
Hybrid electrolytes aimed at application in sodium-ion batteries (SIB) consisting of an organic solvent mixture (EC:PC) and different ionic liquids (ILs); EMImTFSI, BMImTFSI, and Pyr13TFSI, and with the NaTFSI salt providing the Naþ charge carriers have here been extensively studied. The physico-chemical and electrochemical characterisation includes ionic conductivity, viscosity, density, cation coordination and solvation, various safety measures, and electrochemical stability window (ESW). Hybrid electrolytes with 10e50% of IL content were found to have ionic conductivities on par with comparable organic solvent based electrolytes, but with highly enhanced safety properties. A systematic Raman spectroscopy study of the cation coordination and solvation before and after electrolyte safety tests by ignition suggest that IL cations and TFSI remain stable when ignited while organic solvents are consumed. Finally, the solid electrolyte interphase (SEI) formed when using hybrid electrolytes has both better mechanical and electrochemical stability than the SEI derived from pure IL based electrolytes. For a half-cell with a hard carbon (HC) electrode and a hybrid electrolyte with a composition of 0.8 m NaTFSI in EC0.45:PC0.45:- Pyr13TFSI0.10 encouraging results were obtained for IL based electrolytes e ca. 182 mAhg1 at C/10 over 40 cycles., We acknowledge the ALISTORE-ERI members for many fruitful discussions and the Swedish Research Council (VR), the Swedish Energy Agency (STEM), the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (FORMAS) and Ministerio de Ciencia e Innovacion (Spain, grant MAT2014-53500- R) for research funding. DM is grateful for a travel grant to ICMAB from Chalmers Area of Advance Energy. PJ acknowledges the continuous funding from several of Chalmers Areas of Advance: Energy, Materials Science, and Transport., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Why do batteries fail?

  • Palacín, M. Rosa
  • de-Guibert, Anne
Battery failure and gradual performance degradation (aging) are the result of complex interrelated phenomena that depend on battery chemistry, design, environment, and the actual operation conditions. The current available knowledge on these matters results from a vast combination of experimental and modeling approaches.We explore the state of the art with respect to materials as well as usage (temperature, charge/discharge rate, etc.) for lead-acid, nickel-cadmium, nickel–metal hydride, and lithium-ion chemistries. Battery diagnosis strategies and plausible developments related to large-scale battery applications are also discussed., We thank ALISTORE-ERI academic and industrial members for sharing fruitful discussions; P. Bernard and P. Johansson for valuable comments and critical reading of the text; and Ministerio de Ciencia e Innovación (Spain) grant MAT2014-53500-R (M.R.P.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the nature of nitrogen atoms in N-containing reduced graphene oxide

  • Sandoval, Stefania
  • Kumar, Nitesh
  • Oró, Judith
  • Sundaresan, Athinarayanan
  • Rao, Chitamani N. R.
  • Fuertes, Amparo
  • Tobias, Gerard
Physical and chemical properties of graphene can be tailored by nitrogen doping. As a consequence of the continuous race to achieve the highest possible amount of doping there is a growing tendency to assume that all N species are incorporated within the graphene lattice (doping). Here we show that this is not always the case and employ several complementary techniques that allow a proper assessment of the type of nitrogen present. The nature of the nitrogen atoms has been tuned by ammonolysis of graphene oxide in the range of 100 °C–800 °C. This allows us to expand the capabilities of the synthetic approach to afford not only N-doping (at high temperature) but also to introduce amine and amide moieties at 100 °C; the latter presenting a much higher dispersability in aqueous media than graphene oxide. Interestingly, the sample with the highest amount of nitrogen (14.7 wt. %) cannot be referred to as N-doped graphene since it also contains N-bearing aliphatic moieties., We acknowledge financial support from MINECO (grants ACI2009-0861 and MAT2014-53500-R, Spain) and Department of Science and Technology (DST, India). This work has been carried out under the Materials Science PhD program of the Universitat Autònoma de Barcelona (UAB). The XPS data were acquired at the Laboratorio de Microscopías Avanzadas (LMA) - Instituto de Nanociencia de Aragón (INA), and EA in the Centres Científics i Tecnològics - Universitat de Barcelona, both in Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Shortening of MWNT-SPION Hybrids by Steam Treatment Improves Their Magnetic Resonance Imaging Properties In Vitro and In Vivo

  • Cabana, Laura
  • Fontcuberta, Josep
  • Tobias, Gerard
Cabana, Laura et al., Carbon nanotubes (CNTs) have been advocated as promising nanocarriers in the biomedical field. Their high surface area and needle-like shape make these systems especially attractive for diagnostic and therapeutic applications. Biocompatibility, cell internalization, biodistribution, and pharmacokinetic profile have all been reported to be length dependent. In this study, further insights are gotten on the role that the length of CNTs plays when developing novel contrast agents for magnetic resonance imaging (MRI). Two samples of CNTs with different length distribution have been decorated with radio-labeled iron oxide nanoparticles. Despite characterization of the prepared hybrids reveals a similar degree of loading and size of the nanoparticles for both samples, the use of short CNTs is found to enhance the MRI properties of the developed contrast agents both in vitro and in vivo compared to their long counterparts. Keywords, L.C. and M.B. contributed equally to this work. The authors are grateful to Thomas Swan Co. & Ltd for supplying the Elicarb MWNT samples. L.C. acknowledges a CSIC JAE Predoc Fellowship. M.B. is a Marie Curie Fellow. Funding from FP7-ITN Marie-Curie Network programme RADDEL (290023), Biotechnology and Biological Sciences Research Council (BB/J008656/1), Worldwide Cancer Research (12-1054), and Spanish Ministry of Economy and Competitiveness (MAT2014-53500-R and MAT2014-56063-C2-1R) is acknowledged. R.T.M.D. acknowledges funding by The Centre of Excellence in Medical Engineering funded by the Wellcome Trust and EPSRC under Grant No. WT 088641/Z/09/Z. L.C., J.F., and G.T./ ICMAB acknowledge fi nancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). K.T.A., G.T, and R.T.M.D. thank the members of the EU COST actions TD1004 (Theranostics Imaging and Therapy: An Action to Develop Novel Nanosized Systems for Imaging-Guided Drug Delivery) and TD1007 (Bimodal PET-MRI molecular imaging technologies and applications for in vivo monitoring of disease and biological processes) for useful discussions. The XPS data were acquired at the Laboratorio de Microscopías Avanzadas (LMA) – Instituto de Nanociencia de Aragón (INA) (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the viability of Mg extraction in MgMoN2: a combined experimental and theoretical approach

  • Verrelli, Roberta
  • Arroyo de Dompablo, Maria Elena
  • Tchitchekova , Deyana S.
  • Black, Ashley P.
  • Frontera, Carlos
  • Fuertes, Amparo
  • Palacín, M. Rosa
Layered MgMoN2 was prepared by solid state reaction at high temperature between Mo and Mg3N2 in N2 which represents a simple synthetic pathway compared to the previously reported method that used NaN3 as nitrogen source. The crystal structure of MgMoN2 was studied by synchrotron X-ray and neutron powder diffraction. The feasibility of oxidizing this compound and concomitantly extracting magnesium from the structure was assessed by both chemical and electrochemical approaches, using different protocols. The X-ray diffraction patterns of oxidized samples do not exhibit any relevant difference with respect to that of the as prepared MgMoN2 and no differences in the cell parameters are deduced from Rietveld refinements. No hints pointing at the presence of any amorphous phase are observed either. These results are rationalized through DFT calculated energy barriers for Mg2+ ion migration in MgMoN2, We acknowledge Ministerio de Ciencia e Innovación (Spain) for grants MAT2014-53500-R and MAT2015-67593-P, and for “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496) awarded to ICMAB. We thank the Institut Laue Langevin (ILL) and Alba synchrotron for the provision of beamtime; we also thank Dr. Clemens Ritter (ILL) and Dr. F. Fauth (Alba) for assistance during data collection M.E. Arroyo acknowledges access to computational resources from Universidad de Oviedo (MALTA-Consolider cluster) and the Spanish's national high performance computer service (I2 Basque Centre)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly dispersible and stable anionic boron cluster-graphene oxide nanohybrids

  • Cabrera-González, Justo
  • Cabana, Laura
  • Ballesteros, Belén
  • Tobias, Gerard
  • Núñez Aguilera, Rosario
An efficient process to produce boron cluster-graphene oxide nanohybrids that are highly dispersible in water and organic solvents is established for the first time. Dispersions of these nanohybrid materials in water were extraordinarily stable after one month. Characterization of hybrids after grafting of appropriate cobaltabisdicarbollide and closo-dodecaborate derivatives onto the surface of graphene oxide (GO) was done by FT-IR, XPS, and UV/Vis. Thermogravimetric analysis (TGA) clearly shows a higher thermal stability for the modified-GO nanohybrids compared to the parent GO. Of particular note, elemental mapping by energy-filtered transmission electron microscopy (EFTEM) reveals that a uniform decoration of the graphene oxide surface with the boron clusters is achieved under the reported conditions. Therefore, the resulting nanohybrid systems show exceptional physico-chemical and thermal properties, paving the way for an enhanced processability and further expanding the range of application for graphene-based materials., This work has been suppo rted by Ministerio de Economía y Competitividad, (MINECO; CTQ2013-44670-R, MAT2014-53500-R) and Generalitat de Catalunya (2014/SGR/149). J.C.-G. thanks the CSIC for an intramural grant. ICMAB and ICN2 acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2013-0295). J.C.G. is enrolled in the UAB Ph.D. program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Exploitation of the Superoxide Scavenger Properties of Reduced Graphene Oxide and a Trityl Organic Radical for the Impedimetric Sensing of Xanthine

  • Seber, Gonca
  • Muñoz Martín, José M.
  • Sandoval, Stefania
  • Rovira, Concepció
  • Tobias, Gerard
  • Mas Torrent, Marta
  • Crivillers, Núria
This work is based on synergetically exploiting the activity of graphene-based materials and trityl free radicals to sense xanthine (X) by their combined scavenging properties for superoxide anion radical (O2•−). For this, reduced graphene oxide (rGO) and rGO covalently functionalized with a perchlorotriphenylmethyl (PTM) radical derivative (rGO@PTM) are synthesized, characterized, and casted on an electrode surface to achieve a highly sensitive electrochemical recognition platform for xanthine determination. The electrochemical analysis is based on impedimetrically monitoring a radical-involved reaction on the graphene-based electrode surface after reacting with such O2•− derived from the xanthine/xanthine oxidase enzymatic system. The presented strategy yields to determine X at nm levels, decreasing the detection limit 100 times with respect to previously reported (bio)sensors., G.S. and J.M. contributed equally to this work. The authors acknowledge Dr. Belén Ballesteros and Dr. Guillaume Sauthier from the Catalan Institute of Nanoscience and Nanotechnology (ICN2) for the TEM and XPS measurements, respectively. This work was supported by Future and Emerging Technologies (FET) ACMOL (GA No. 618082) and the European Research Council (ERC) StG 2012-306826 e-GAMES project. The authors also thank the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Dirección General de Investigación (DGI) (Spain) project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496), and project challenges in inorganic materials for enegery applications (CHALENG) (MAT2014-53500-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative study of shortening and cutting strategies of single-walled and multi-walled carbon nanotubes assessed by scanning electron microscopy

  • Kierkowicz, Magdalena
  • Pach, Elzbieta
  • Santidrián, Ana
  • Sandoval, Stefania
  • Gonçalves, Gil
  • Tobías Rossell, Ester
  • Kalbáč, Martin
  • Ballesteros, Belén
  • Tobias, Gerard
Short carbon nanotubes (CNTs) are desired for a variety of applications. As a consequence, several strategies have been reported to cut and shorten the length of as-produced carbon nanotubes via chemical and physical routes. The efficiency of a given strategy largely depends on the physico-chemical characteristics of the CNTs employed. In order to be able to directly compare the advantages and disadvantages of commonly used protocols, a single batch of chemical vapor deposition single-walled CNTs (SWCNTs) and a batch of multi-walled CNTs (MWCNTs) were subjected to four cutting/shortening strategies, namely acid cutting, piranha treatment, steam shortening and ball milling. The length distribution was assessed by means of scanning electron microscopy. Sample purity and CNT wall structure were determined by Raman spectroscopy, thermogravimetric analysis and magnetic measurements. Within the employed experimental conditions, piranha treatment turned out to be the most efficient to achieve short SWCNTs with a narrow length distribution in a good yield, whereas a mixture of sulfuric/nitric acid was preferred in the case of MWCNTs. A subsequent short steam treatment allowed to remove functional groups present in the samples, leading to median length distributions of 266 nm and 225 nm for SWCNTs and MWCNTs respectively after the combined protocols., The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme FP7/2007-2013/ under REA grant agreement n°290023 (RADDEL). We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496, ICMAB; SEV-2013-0295, ICN2), and CHALENG (MAT2014-53500-R). M. K. also acknowledges support from the project LL1301 (MEYS). The ICN2 is funded by the CERCA programme (Generalitat de Catalunya). G. G. gratefully acknowledges the funding by European Commission under individual fellowship Marie Sklodowska-Curie (NANOTER, Grant Agreement 708351).We are thankful to Guillaume Sauthier from ICN2 for the XPS measurements. The authors would like to thank Thomas Swan Co. Ltd. for providing Elicarb© carbon nanotubes used for this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Topochemical synthesis of cation ordered double perovskite oxynitrides

  • Ceravola, Roberta
  • Oró, Judith
  • Black, Ashley P.
  • Ritter, C.
  • Puente-Orench, Inés
  • Mata, Ignasi
  • Molins, Elies
  • Frontera, Carlos
  • Fuertes, Amparo
Topochemical nitridation in ammonia at moderate temperatures of cation ordered Sr2FeWO6 produces new antiferromagnetic double perovskite oxynitrides Sr2FeWO6-xNx with 0 < x ≤ 1. Nitrogen introduction induces the oxidation of Fe2+ to Fe3+ and decreases TN from 38 K (x = 0) to 13 K for Sr2FeWO5N which represents the first example of a double perovskite oxynitride with both high cationic order and nitrogen content. This synthetic approach can be extended to other cation combinations expanding the possibility of new materials in the large group of double perovskites., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO), Spain (Projects MAT2014-53500-R, MAT2015-71664-R, MAT2015-67593-P and ENE2015-63969) and it has been developed under the Materials Science PhD program of the Universitat Autònoma de Barcelona. Fellowship support to AB from MINECO (FPI, project MAT2011-24757) is gratefully acknowledged. ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-cytotoxic carbon nanocapsules synthesized via one-pot filling and end-closing of multi-walled carbon nanotubes

  • Martincic, Markus
  • Vranic, Sandra
  • Pach, Elzbieta
  • Sandoval, Stefania
  • Ballesteros, Belén
  • Kostarelos, Kostas
  • Tobias, Gerard
Filled carbon nanotubes (CNTs) find application in a variety of fields that expand from sensors to supercapacitors going through targeted therapies. Bulk filling of CNTs in general results in samples that contain a large amount of non-encapsulated material external to the CNTs. The presence of external material can dominate the properties of the resulting hybrids and can also induce side effects when employed in the biomedical field. Unless the encapsulated payloads have a strong interaction with the inner CNT walls, an additional step is required to block the ends of the CNTs thus allowing the selective removal of the non-encapsulated compounds while preserving the inner cargo. Herein we present a fast, easy and versatile approach that allows both filling (NaI, KI, BaI2, GdCl3 and SmCl3) and end-closing of multi-walled CNTs in a single-step, forming “carbon nanocapsules”. Remarkably the encapsulation of GdCl3 and SmCl3 leads to the formation of tubular van der Waals heterostructures. The prepared nanocapsules are efficiently internalized by cells without inducing cytotoxicity, thus presenting a safe tool for the delivery of therapeutic and dianostic agents to cells. The synergies of novel carbon and inorganic hybrid materials can be explored using the present approach., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of Curcuminoids by Liquid Chromatography with Diode Array Detection: Application to the Characterization of Turmeric and Curry Samples

  • Vidal, Òscar
  • Castilla, Xavier
  • Aliaga Alcalde, Nuria
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
Background: A simple, rapid and efficient method for the determination of curcumin and other polyphenols in turmeric and curry samples was here developed. The method relied on sample extraction with methanol and extract analysis by liquid chromatography with diode array detection (HPLC-DAD). Methods: The separation of components was carried out in reversed-phase mode using an elution gradient based on 0.1% (v/v) formic acid aqueous solution and acetonitrile as the components of the mobile phase. Chromatograms were recorded at 420 nm for specific monitoring of curcumin and related compounds. Results: Extraction and separation conditions were optimized by experimental design and multicriteria response functions. Figures of merit were established under the selected experimental conditions. In general, repeatability of peak areas were better than 0.4%, detection limits were below 0.006 mg L-1 and quantitative recoveries expressed as a percentage were about 100 ± 2. The method was applied to quantify curcuminoids in commercial samples. It was found that apart from curcumin, demethoxycurcumin and bisdemethoxycurcumin, other related molecules also occurred in the samples. In this regard, a tentative elucidation of possible unknown curcuminoids was attempted by liquid chromatography coupled to mass spectrometry. Conclusion: Differences in the compositional profiles among samples were encountered to be relevant, so that the resulting HPLC-DAD data was exploited for chemometric characterization of turmeric and curry samples. Samples were successfully discriminated according to matrix types, species varieties and origins., This work was financed by the Spanish Ministry of Economy and Competitiveness through the projects CTQ2014-56324-CO2-P1, MAT2014-53500-R, MAT2016-77852-C2-1-R and the “Severo Ochoa” Programme for Cen-ters of Excellence in R&D (SEV-2015-0496), and by Gener-alitat de Catalunya with project 2014SGR377., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encapsulation of Fullerenes: A Versatile Approach for the Confinement and Release of Materials Within Open-Ended Multiwalled Carbon Nanotubes

  • Sandoval, Stefania
  • Tobias, Gerard
We have employed fullerenes as versatile agents to “cork” the open tips of multiwalled carbon nanotubes (MWCNTs), and as promoting species for the release of the inorganic material filled within the nanotubes’ cavities. High Z element compounds, namely, PbI2, ZnI2, and CeI3, were chosen to easily determine the presence of the filler inside the hosting nanotubes by transmission electron microscopy (TEM). Fullerenes can isolate inorganic nanostructures confined within the hollow cavities of MWCNTs, which allows the removal of the external material remnant after the filling. Otherwise, taking advantage of the affinity of fullerenes with selected solvents, we have confirmed the ability of the C60 molecules to promote the displacement of the inorganic guest from the host. We propose two different strategies to trigger the release, employing vapor and liquid phase treatments. The first protocol involves annealing filled MWCNTs in presence of fullerenes (to obtain C60PbI2@MWCNTs) and the subsequent washing of the sample in ethanol under mild conditions. On the other hand, the simultaneous introduction of the C60 molecules and the liberation of the guest are produced by a single step wet procedure; the latter being potentially useful when materials that are not stable at high temperatures are employed for filling., The research leading to these results has received funding from the Spanish Ministry of Economy and Competitiveness (MINECO, Spain) through the grant MAT2014-53500-R. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical Intercalation of Calcium and Magnesium in TiS<inf>2</inf>: Fundamental Studies Related to Multivalent Battery Applications

  • Tchitchekova, Deyana S.
  • Ponrouch, Alexandre
  • Verrelli, Roberta
  • Broux, Thibault
  • Frontera, Carlos
  • Sorrentino, Andrea
  • Bardé, Fanny
  • Biskup, Neven
  • Arroyo de Dompablo, Maria Elena
  • Palacín, M. Rosa
A comparative study of the electrochemical intercalation of Ca2+ and Mg2+ in layered TiS2 using alkylcarbonate-based electrolytes is reported, and for the first time, reversible electrochemical Ca2+ insertion is proved in this compound using both X-ray diffraction and differential absorption X-ray tomography at the Ca L2 edge. Different new phases are formed upon M2+ insertion that are structurally characterized, their amount and composition being dependent on M2+ and the experimental conditions. The first phase formed upon reduction is found to be the result of an ion-solvated intercalation mechanism, with solvent molecule(s) being cointercalated with the M2+ cation. Upon further reduction, new non-cointercalated calcium-containing phases seem to form at the expense of unreacted TiS2. The calculated activation energy barriers for Ca2+ migration in TiS2 (0.75 eV) are lower than those previously reported for Mg (1.14 eV) at the dilute limit and within the CdI2 structural type. DFT results indicate that the expansion of the interlayer space lowers the energy barrier and favors a different pathway for Ca2+ migration., The authors acknowledge funding from Ministerio de Economía y Competitividad (Spain) for magnesium battery research (grant MAT2014-53500R). ICMAB’s authors are also grateful for funding from Toyota Motor Europe for calcium battery research, for support through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV- 2015-0496), to ALBA synchrotron for beam time allocation at MSPD beamline (proposal 2014070933), and to Dr. François Fauth for his assistance during data collection. The X-ray tomography experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff, and the ICMAB authors are grateful to Dino Tonti for helpful discussion. M.E.A.-d.D. and N.B. acknowledge computational facilities from Universidad de Oviedo (MALTA-Consolider cluster)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New rare earth hafnium oxynitride perovskites with photocatalytic activity in water oxidation and reduction

  • Black, Ashley P.
  • Suzuki, Hajime
  • Higashi, Masanobu
  • Frontera, Carlos
  • Ritter, Clemens
  • De, Chandan
  • Sundaresan, A.
  • Abe, Ryu
  • Fuertes, Amparo
RHfO2N perovskites with R = La, Nd and Sm show a GdFeO3-type structure and are semiconductors with band gaps of 3.35, 3.40 and 2.85 eV and relative dielectric constants of 30, 16 and 28 respectively. These compounds have adequate reduction and oxidation potentials to conduct the overall water splitting reaction, and the analogous perovskite LaZrO2N with a band gap of 2.8 eV shows photocatalytic activity under visible light irradiation for O2 evolution., This work was supported by the MINEICO, Spain (Projects MAT2014-53500-R, MAT2015-67593-P, MAT2017-86616-R and SEV- 2015-0496), the JSPS-Japan (17H06439), and it has been developed under the PhD program of the UAB. Dr J. Oró-Solé is acknowledged for EDS measurements. We thank the ILL, ISIS and Alba synchrotron (experiment number 2015091410) for the provision of beamtime, and Dr F. Fauth (Alba) for assistance during data collection., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electrochemical intercalation of Calcium and Magnesium in TiS2: fundamental studies related to multivalent battery applications

  • Tchitchekova, Deyana S.
  • Ponrouch, Alexandre
  • Verrelli, Roberta
  • Broux, Thibault
  • Frontera, Carlos
  • Sorrentino, Andrea
  • Barde, Fanny
  • Biskup Zaja, Nevenko
  • Arroyo De Dompablo, María Elena
  • Palacín, M. Rosa
A comparative study of the electrochemical intercalation of Ca2+ and Mg2+ in layered TiS2 using alkylcarbonate-based electrolytes is reported, and for the first time, reversible electrochemical Ca2+ insertion is proved in this compound using both X-ray diffraction and differential absorption X-ray tomography at the Ca L-2 edge. Different new phases are formed upon M2+ insertion that are structurally characterized, their amount and composition being dependent on M2+ and the experimental conditions. The first phase formed upon reduction is found to be the result of an ion-solvated intercalation mechanism, with solvent molecule(s) being cointercalated with the M2+ cation. Upon further reduction, new non-cointercalated calcium-containing phases seem to form at the expense of unreacted TiS2. The calculated activation energy barriers for Ca2+ migration in TiS2 (0.75 eV) are lower than those previously reported for Mg (1.14 eV) at the dilute limit and within the CdI2 structural type. DFT results indicate that the expansion of the interlayer space lowers the energy barrier and favors a different pathway for Ca2+ migration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanotexturing to Enhance Photoluminescent Response of Atomically Thin Indium Selenide with Highly Tunable Band Gap

  • Brotons Gisbert, Mauro
  • Andrés Penares, Daniel
  • Suh, Joonki
  • Hidalgo, Francisco|||0000-0003-1987-6478
  • Abargues, Rafael
  • Rodríguez Cantó, Pedro J.
  • Segura, Alfredo
  • Cros, Ana
  • Tobias, Gerard|||0000-0001-7116-2152
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Wu, Junqiao
  • Martínez Pastor, Juan P.
  • Sánchez Royo, Juan F.
Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-cytotoxic carbon nanocapsules synthesized via one-pot filling and end-closing of multi-walled carbon nanotubes

  • Martincic, Markus
  • Vranic, Sandra|||0000-0002-6653-7156
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Sandoval, Stefania|||0000-0002-0050-7501
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Tobias, Gerard|||0000-0001-7116-2152
Filled carbon nanotubes (CNTs) find application in a variety of fields that expand from sensors to supercapacitors going through targeted therapies. Bulk filling of CNTs in general results in samples that contain a large amount of non-encapsulated material external to the CNTs. The presence of external material can dominate the properties of the resulting hybrids and can also induce side effects when employed in the biomedical field. Unless the encapsulated payloads have a strong interaction with the inner CNT walls, an additional step is required to block the ends of the CNTs thus allowing the selective removal of the non-encapsulated compounds while preserving the inner cargo. Herein we present a fast, easy and versatile approach that allows both filling (NaI, KI, BaI, GdCl and SmCl) and end-closing of multi-walled CNTs in a single-step, forming "carbon nanocapsules". Remarkably the encapsulation of GdCl and SmCl leads to the formation of tubular van der Waals heterostructures. The prepared nanocapsules are efficiently internalized by cells without inducing cytotoxicity, thus presenting a safe tool for the delivery of therapeutic and dianostic agents to cells. The synergies of novel carbon and inorganic hybrid materials can be explored using the present approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comparative study of shortening and cutting strategies of single-walled and multi-walled carbon nanotubes assessed by scanning electron microscopy

  • Kierkowicz, Magdalena
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Santidrián, Ana|||0000-0002-6964-4096
  • Sandoval, Stefania|||0000-0002-0050-7501
  • Gonçalves, Gil|||0000-0002-2302-9661
  • Tobías Rossell, Ester
  • Kalbáč, Martin|||0000-0001-9574-4368
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
Short carbon nanotubes (CNTs) are desired for a variety of applications. As a consequence, several strategies have been reported to cut and shorten the length of as-produced CNTs via chemical and physical routes. The efficiency of a given strategy largely depends on the physico-chemical characteristics of the CNTs employed. In order to be able to directly compare the advantages and disadvantages of commonly used protocols, a single batch of chemical vapor deposition single-walled CNTs (SWCNTs) and a batch of multi-walled CNTs (MWCNTs) were subjected to four cutting/shortening strategies, namely acid cutting, piranha treatment, steam shortening and ball milling. The length distribution was assessed by means of scanning electron microscopy. Sample purity and CNT wall structure were determined by Raman spectroscopy, thermogravimetric analysis and magnetic measurements. Within the employed experimental conditions, piranha treatment turned out to be the most efficient to achieve short SWCNTs with a narrow length distribution in a good yield, whereas a mixture of sulfuric/nitric acid was preferred in the case of MWCNTs. A subsequent short steam treatment allowed to remove functional groups present in the samples, leading to median length distributions of 266 nm and 225 nm for SWCNTs and MWCNTs respectively after the combined protocols.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanosecond Laser-Assisted Nitrogen Doping of Graphene Oxide Dispersions

  • Kepić, Dejan|||0000-0003-2777-6864
  • Sandoval, Stefania|||0000-0002-0050-7501
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • Gyorgy, Eniko|||0000-0001-6311-5823
  • Cabana Jiménez, Laura
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
N-doped reduced graphene oxide (RGO) has been prepared in bulk form by laser irradiation of graphene oxide (GO) dispersed in an aqueous solution of ammonia. A pulsed Nd:YAG laser with emission wavelengths in the infrared (IR) 1064 nm, visible (Vis) 532 nm, and ultraviolet (UV) 266 nm spectral regions was employed for the preparation of the N-doped RGO samples. Regardless of the laser energy employed, the resulting material presents a higher fraction of pyrrolic nitrogen compared to nitrogen atoms in pyridinic and graphitic coordination. Noticeably, whereas increasing the laser fluence of UV and Vis wavelengths results in an increase in the total amount of nitrogen, up to 4.9 at. % (UV wavelength at 60 mJ cm fluence), the opposite trend is observed when the GO is irradiated in ammonia solution through IR processing. The proposed laser-based methodology allows the bulk synthesis of N-doped reduced graphene oxide in a simple, fast, and cost efficient manner.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Encapsulation of two-dimensional materials inside carbon nanotubes, towards an enhanced synthesis of single-layered metal halides

  • Sandoval, Stefania|||0000-0002-0050-7501
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
The unique properties of two-dimensional (2D) nanomaterials make them highly attractive for a wide range of applications. As a consequence, several top-down and bottom up approaches are being explored to isolate or synthesize single-layers of 2D materials in a reliable manner. Here we report on the synthesis of individual layers of several 2D van der Waals solids, namely CeI, CeCl, TbCl and ZnI by template-assisted growth using carbon nanotubes as directing agents, thus proving the versatility of this approach. Once confined, the metal halides can adopt different structures including single-layered metal halide nanotubes, which formation is greatly enhanced by increasing the temperature of synthesis. This opens up a new strategy for the isolation of individual layers of a wide variety of metal halides, a family of 2D materials that has been barely explored.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly dispersible and stable anionic boron cluster-graphene oxide nanohybrids

  • Cabrera-González, Justo|||0000-0002-7733-9681
  • Cabana Jiménez, Laura
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
  • Núñez, Rosario|||0000-0003-4582-5148
An efficient process to produce boron cluster-graphene oxide nanohybrids that are highly dispersible in water and organic solvents is established for the first time. Dispersions of these nanohybrid materials in water were extraordinarily stable after one month. Characterization of hybrids after grafting of appropriate cobaltabisdicarbollide and closo-dodecaborate derivatives onto the surface of graphene oxide (GO) was done by FT-IR, XPS, and UV/Vis. Thermogravimetric analysis (TGA) clearly shows a higher thermal stability for the modified-GO nanohybrids compared to the parent GO. Of particular note, elemental mapping by energy-filtered transmission electron microscopy (EFTEM) reveals that a uniform decoration of the graphene oxide surface with the boron clusters is achieved under the reported conditions. Therefore, the resulting nanohybrid systems show exceptional physico-chemical and thermal properties, paving the way for an enhanced processability and further expanding the range of application for graphene-based materials.