Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martin, Santiago
  • Sorribes-Terrés, Iván
  • Mata, Jose A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 +/- 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER "Una manera de hacer Europa". Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR", and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU". I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program "Santiago Grisolia" (GrisoliaP2021/114). The authors thank 'Servei Central d'Instrumentacio Cientifica (SCIC) de la Universitat Jaume I '. S. M. is grateful to Gobierno de Aragon for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragon).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alloying Engineering of Defective Molybdenum SulfideBasal Planes for Enhanced Borrowing Hydrogen Activity inthe Thioetherification of Alcohols

  • Rodenes-Carrillo, Miriam
  • Ostric, Darija
  • Martín, Santiago
  • Concepción, Patricia
  • Sorribes-Terrés, Iván
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The borrowing hydrogen thioetherification of alcohols overheterogeneous catalysts has emerged as an attractive andpractical synthetic strategy to prepare thioethers from theperspective of green and sustainable chemistry. Developingefficient catalysts is the key to improve this carbon-sulfur (C@S)bond formation process. Herein, a novel catalyst, namely{Mo2.89W0.11S4}n, has been prepared by alloying engineering of itsbasal planes through an innovative synthetic methodology thatmakes use of isostructural building entities based on molybde-num and tungsten sulfide molecular complexes with M3S4(M=Mo, W) cluster cores. Besides excellent activity and reus-ability, {Mo2.89W0.11S4}n is of broad scope, enabling the con-version of structurally diverse thiols and primary as well assecondary alcohols into thioethers. A set of characterizations, incombination with catalytic results, reveal that the catalyticactivity of {Mo2.89W0.11S4}n for this relevant transformation arisesfrom the presence of multiple-type active centers in thedefective basal planes of this alloyed catalyst. More specifically,coordinatively unsaturated sulfurs and metal atoms with Lewisbasic and Lewis acid properties, respectively, are proposed tobe the active sites involved in the borrowing hydrogenmechanism., This work has been supported by the Gen-T Plan of theGeneralitat Valenciana through the programs Subvencions al Excel·lència Científica de Júniors Investigadors (SEJI/2020/018)and Suport a l estabilització de les persones investigadores amb talent contractades amb càrrec a les convocatòries 2023 ianteriors del Pla GenT (ESGENT/016/2024). The Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR , the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033and by ERDF/EU , as well as the Universitat Jaume I(GACUJIMB/2023/13) are also gratefully acknowledged. Authorsare thankful for the support from the Severo Ochoa Center ofExcellence program (CEX2021-001230-S). M.R. acknowledgesthe Vice-Rectorate for Research, Innovation and Transfer of theUniversitat Politècnica de València (UPV) for a pre-doctoralfellowship. D.O. thanks the ERASMUS + programme. S.M. isgrateful for financial assistance from Gobierno de Aragónthrough grant E31_23R with European Social Funds (Con-struyendo Europa desde Aragón).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nested NiPd nanocatalysts fabricated by reactive laser ablation in liquids: a breakthrough in selective nitroarene reduction to anilines

  • Havelka, Ondrej
  • Thomas, Astrid
  • Rodenes-Carrillo, Miriam
  • Cvek, Martin
  • Lukowiec, Dariusz
  • Sorribes-Terrés, Iván
  • Torres-Mendieta, Rafael
[EN] The presence of persistent pollutants in water poses a severe environmental threat, driving an urgent need for efficient and eco-friendly remediation strategies. In response, the scientific community is increasingly focused on developing catalytic processes that maximize efficiency while minimizing environmental impact. In this context, we introduce recyclable catalysts based on NiPd nanoparticles (NPs) that feature tunable phase distributions and compositions. By varying Pd doping levels through Reactive Laser Ablation in Liquids (RLAL), we precisely control the catalytic and magnetic properties of these NPs. Notably, a nanocatalyst featuring the NiPd alloyed phase exhibits exceptional catalytic performance, achieving a turnover frequency of 3680 h-1 and 98.5% selectivity in the model transformation of 4-nitrophenol into 4-aminophenol. Additionally, it demonstrates remarkable efficiency in the chemoselective hydrogenation of various nitroarenes to functionalized anilines under mild conditions (atmospheric H2 pressure, 33 degrees C). Furthermore, the synergistic properties arising from the internal structure of these NPs allow them to surpass the performance of nanocatalysts made from their monometallic counterparts and simple mixtures. Overall, this study represents a significant advancement in the precise control of nanocatalyst synthesis and their associated physicochemical properties, paving the way for more efficient redox catalytic protocols, including industrially demanding hydrogenation reactions., This work was supported by the European Union's Horizon Europe Widera 2021 Programme under the SURRI project, Grant Agreement No. 101079345. R. T.-M. acknowledges financial support from the European Union's Horizon Europe Research and Innovation Programme under Marie Sklodowska-Curie grant agreements LYMON number 101151748. M. C. thanks the project DKRVO (RP/CPS/2024-28/007), supported by the Ministry of Education, Youth and Sports of the Czech Republic. I. S. thanks the Gen-T Plan of the Generalitat Valenciana through the program "Suport a l'estabilitzacio de les persones investigadores amb talent contractades amb carrec a les convocatories 2023 i anteriors del Pla GenT" (ESGENT/016/2024). Furthermore, the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR", the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU", as well as the Universitat Jaume I (GACUJIMA/2024/13) are also gratefully acknowledged. D. L. is a scholarship holder of the Visegrad International Scholarship Grant (52410479) for the period from September 2024 to June 2025. M. R. thanks the Vice-Rectorate for Research, Innovation and Transfer of the Universitat Politecnica de Valencia (UPV) for a pre-doctoral fellowship. A. T. acknowledges the ERASMUS+ programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recycling properties of iridium nanoparticles anchored on graphene as catalysts in alcohol oxidation

  • Ruiz-Almoguera, David
  • Martín, Santiago
  • Sorribes, Iván
  • Mata, José A.
In this paper, we describe the synthesis, characterization, and recycling properties of iridium nanoparticles (IrNPs) anchored on graphene (IrNPs@GNPs) as a catalyst for alcohol oxidation. The formation of this hybrid material (comprising metal nanoparticles on graphene) is achieved in a single step under mild conditions. Graphene serves not only as a support for metal nanoparticles but also plays a critical role in controlling nanoparticle growth and nucleation while enhancing stability by preventing sintering. The IrNPs exhibit a spherical morphology with a small average size distribution (2.1 nm). The IrNPs@GNPs is an efficient catalytic material in the conversion of alcohols to the corresponding carbonyls in a sustainable manner, as supported by quantitative sustainability metrics. Oxidation reactions proceed at room temperature, using water as the solvent and atmospheric oxygen as the terminal oxidant. We detail the catalytic activity, substrate scope, and reuse/recycling of this hybrid material. Furthermore, we identify the primary deactivation pathway of the catalyst and present a regeneration protocol that restores its initial activity. The reuse and recyclability of iridium nanoparticles on graphene represent a significant advancement in the sustainable application of iridium-based catalysts., Thanks to the Spanish Ministry of Science and Innovation for financial support through the project PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER “Una manera de hacer Europa”. Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) are also gratefully acknowledged. I.S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”, and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. D.R.-A. thanks the grant FPU22/02988. The authors thank ‘Servei Central d’Instrumentació Científica (SCIC) de la Universitat Jaume I’. S.M. is grateful to Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From catalyst design to recycling studies for the analysis of sodium formate/bicarbonate as a practical system for hydrogen storage

  • Arroyas, Lidón
  • Mollar-Cuni, Andrés
  • Mejuto, Carmen
  • Sorribes, Iván
  • Mata, José A.
In this manuscript we evaluate the practical advantages and limitations of sodium formate/bicarbonate pair as a Hydrogen Carrier (HC). The catalyst is a hybrid material composed of palladium nanoparticles (PdNPs) supported on carbon-nitride (g-C3N4), prepared in a single-step synthesis that provides well-defined and homogeneously distributed nanoparticles. The catalytic performance of PdNPs@C3N4 was investigated in the dehydrogenation of sodium formate under aqueous conditions, showing moderate activity and good stability over multiple reuse cycles. The same catalyst is also effective for the reverse reaction, i.e. the sodium bicarbonate hydrogenation, demonstrating its bidirectional catalytic capability. Catalyst performance and stability were further evaluated through alternating cycles of formate dehydrogenation and bicarbonate hydrogenation, achieving four complete cycles without significant deactivation. Mechanistic insights, supported by labelling deuterium experiments, provide experimental evidence of a plausible pathway involving heterolytic water activation facilitated by the nitrogen-rich support., Thanks to the Spanish Ministry of Science and Innovation for financial support through the project PID2021-126071OB-C22, funded by MICIN/AEI/10.13039/501100011033/FEDER “Una manera de hacer Europa”. Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) are also gratefully acknowledged. I.S thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”, the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”, as well as the Universitat Jaume I (GACUJIMA/2024/13). Furthermore, the Gen-T Plan of the Generalitat Valenciana through the program “Suport a l'estabilització de les persones investigadores amb talent contractades amb càrrec a les convocatòries 2023 i anteriors del Pla GenT” (CIESGT/2024/016) is also gratefully acknowledged. S.M. is grateful to Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). The authors thank ‘Servei Central d’Instrumentació Científica (SCIC) de la Universitat Jaume I’. Appendix A. Supplementary data, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martín, Santiago
  • Sorribes, Iván
  • García Gómez, Hermenegildo
  • Mata, José A.
The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 ± 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER “Una manera de hacer Europa”. Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”, and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program “Santiago Grisolia” (GrisoliaP2021/114). The authors thank ‘Servei Central d'Instrumentació Científica (SCIC) de la Universitat Jaume I′. S. M. is grateful to Gobierno de Aragón for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Alloying Engineering of Defective Molybdenum Sulfide Basal Planes for Enhanced Borrowing Hydrogen Activity in the Thioetherification of Alcohols

  • Rodenes, Miriam
  • Oštric, Darija
  • Martín, Santiago
  • Concepción, Patricia
  • Corma, Avelino
  • Sorribes, Iván
The borrowing hydrogen thioetherification of alcohols over heterogeneous catalysts has emerged as an attractive and practical synthetic strategy to prepare thioethers from the perspective of green and sustainable chemistry. Developing efficient catalysts is the key to improve this carbon‐sulfur (C−S) bond formation process. Herein, a novel catalyst, namely {Mo2.89W0.11S4}n, has been prepared by alloying engineering of its basal planes through an innovative synthetic methodology that makes use of isostructural building entities based on molybdenum and tungsten sulfide molecular complexes with M3S4 (M=Mo, W) cluster cores. Besides excellent activity and reusability, {Mo2.89W0.11S4}n is of broad scope, enabling the conversion of structurally diverse thiols and primary as well as secondary alcohols into thioethers. A set of characterizations, in combination with catalytic results, reveal that the catalytic activity of {Mo2.89W0.11S4}n for this relevant transformation arises from the presence of multiple‐type active centers in the defective basal planes of this alloyed catalyst. More specifically, coordinatively unsaturated sulfurs and metal atoms with Lewis basic and Lewis acid properties, respectively, are proposed to be the active sites involved in the borrowing hydrogen mechanism.