Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved catalytic hydrogen release of quasi HKUST-1 compared to HKUST-1

  • Bagheri, Minoo
  • Masoomi, Mohammad Yaser
  • Melillo, Arianna
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] On-demand hydrogen release could be an important process for the transportation of fuel in the near future. Herein it is reported that the controlled thermolysis of HKUST-1 under optimal conditions generates structural defects resulting in a quasi-HKUST-1 material showing a 20-fold enhancement of the H-2 release turnover frequency at room temperature in the absence of a base, This work is based upon research funded by the Iran National Science Foundation (INSF) under project no. 4000089 and Spanish Ministry of Science and Innovation (Severo Ochoa and RTI201898237-CO2-1). Also, support for this investigation from Arak University is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quasi-HKUST Prepared via Postsynthetic Defect Engineering for Highly Improved Catalytic Conversion of 4-Nitrophenol

  • Bagheri, Minoo
  • Masoomi, Mohammad Yaser
  • Melillo, Arianna
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] HKUST-1 [Cu-3(BTC)(2)(H2O)(3)](n)center dot nH(2)OMeOH was submitted to thermolysis under controlled conditions at temperatures between 100 and 300 degrees C. This treatment resulted in partial ligand decarboxylation, generating coordinatively unsaturated Cu2+ sites with extra porosity on the way to the transformation of the initial HKUST-1 framework to CuO. The obtained materials retaining in part the HKUST-1 original crystal structure (quasi-MOFs) were used to promote 4-nitrophenol conversion to 4-aminophenol. Because of the partial linker decomposition, the quasi-MOF treated at 240 degrees C contains coordinatively unsaturated Cu2+ ions distributed throughout the Q-HKUST lattice together with micro- and mesopores. These defects explain the excellent catalytic performance of QH-240 with an apparent rate constant of 1.02 X 10(-2) s(-1) in excess of NaBH4 and an activity factor and half-life time of 51 s(-1)g(-1) and 68 s, respectively, which is much better than that of the HKUST parent. Also, the induction period decreases from the order of minutes to seconds in the presence of the HKUST and QH-240 catalysts, respectively. Kinetic studies fit with the Langmuir-Hinshelwood theory in which both 4-nitrophenol and BH4- should be adsorbed onto the catalyst surface. The values of the true rate constant (k), the adsorption constants of 4-nitrophenol and BH4- (K4-NP and K-BH4(-)), as well as the activation energy are in agreement with a rate-determining step involving the reduction of 4-nitrophenol by the surface-bound hydrogen species., This work is based upon research funded by the Iran National Science Foundation (INSF) under project no. 4000089. Also, support of this investigation by Arak University is gratefully acknowledged. The Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High hydrogen release catalytic activity by quasi-MOFs prepared via post-synthetic pore engineering

  • Bagheri, Minoo
  • Masoomi, Mohammad Yaser
  • Domínguez Torres, Esther
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The catalytic activity of metal-organic frameworks (MOFs) depends largely on the presence of structural defects. In the present study, cobalt based metal-organic framework TMU-10, [Co-6(oba)(5)(OH)(2)(H2O)(2)(DMF)(4)](n)center dot 2DMF has been subjected to controlled thermolysis under air atmosphere at different temperatures in the range of 100-700 degrees C. This treatment results in the removal of ligands, and generation of structural defects and additional porosity in a controlled manner. The resulting materials, denoted as quasi MOFs according to the literature, were subsequently employed as catalysts for hydrogen release from NaBH4 by hydrolysis. The quasi TMU-10 framework obtained at 300 degrees C (QT-300) shows the highest turnover frequency of the series with a value of 13 333 mL min(-1) g(-1) at room temperature in the absence of a base, with an activation energy of 56.8 kJ mol(-1). The simultaneous presence of micro- and mesopores in QT-300 with unsaturated Lewis acid sites on cobalt nodes due to the conversion of a fraction of Co(ii) centers to Co(iii) as well as the presence of tetrahedral Co(ii) sites is responsible for this catalytic behavior. The influence of the catalyst dosage and BH4- concentration is in good agreement with the Langmuir-Hinshelwood model in which both reactants must be adsorbed onto the catalyst surface. Further investigation on the hydrolysis of the NaBH4 + D2O system presents a primary kinetic isotope effect indicating that water O-H bond cleavage occurs in the rate determining step., Support of this investigation by Arak University and Iran National Science Foundation (INSF) (grant No. 4000089) are gratefully acknowledged. Ministerio de Ciencia e Innovacion (Severo Ochoa and RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) are also acknowledged.