Pasar al contenido principal

MOFS Y MATERIALES MOLECULARES MULTIFUNCIONALES: DISEÑO, SINTESIS, CARACTERIZACION Y PROCESADO

CTQ2017-87201-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increased photocatalytic activity and selectivity towards methane of trimetallic NiTiAl-LDH

  • Molina-Muriel, Manuel
  • Peng, Yong
  • Ribera, Antonio
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Layered double hydroxides is a rising family of materials with interesting photocatalytic properties that are starting to be employed on the CO2 photoreduction to useful chemicals. However, the selectivity control towards high energy value products, such as methane or methanol, is one of the main issues of this process due to the easier formation of CO, which requires fewer electrons to be transferred, and the competition of hydrogen evolution reaction. In this work, a new LDH material containing Ni, Ti and Al within the structure was synthesised with the purpose of increasing the selectivity towards methane production. The material was tested under solar simulator conditions, yielding a methane production of 148 mu mol g-1 h-1, with a selectivity of 86%, one of the highest values reported for this kind of material, while the competition from hydrogen evolution was almost suppressed. The role of Ti directing the selectivity towards methane was confirmed, since no CH4 was produced when NiAl-LDH catalyst was used instead., We thank the grant CTQ2017-87201-P, Severo Ochoa and RTI2018.98237-B-CO1 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" for financial support. Generalitat Valenciana (Prometeo 2017/083 and Prometeo 2019/076) is also gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delamination of 2D coordination polymers: The role of solvent and ultrasound

  • Contreras-Pereda, Noemí
  • Hayati, Payam
  • Suárez-García, Salvio
  • Esrafili, P.
  • Retailleau, Pascal
  • Benmansour, S.
  • Novio, Fernando
  • Morsali, Ali
  • Ruiz Molina, Daniel
Two novel cadmium-based 2D coordination polymers have been synthesized and characterized. Experimental results evidence that the best delamination processes occurs when weak interactions dominate the cohesion between layers and solvent molecules are occluded within the crystalline network. In this case, the delamination of the crystals occurs spontaneously in water. On top of that, and thanks to the high stability of the resulting (flake) colloidal dispersions, we have completed a detailed study of the sonication assisted delamination impact by: I) comparison of two different sonication approaches (bath vs. tip sonication) and II) optimization of final flake morphology and yield by controlling solvent and sonication time. Our results definitely pave the way for the fabrication and implementation of 2D coordination polymers using ultrasound., This work was supported by grant MAT 2015-70615-R from the Spanish Government funds and by the European Regional Development Fund (ERDF). Funded by the CERCA Program/Generalitat de Catalunya, ICN2 is supported by the Severo Ochoa program from Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Grant No. SEV-2017-0706). Noemí Contreras Pereda’s project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/ES17/11600012. Salvio Suárez-García acknowledges the support from MINECO BES-2015-071492 grant. S.B. thanks the Generalitat Valenciana (Prometeo2014/II/076 project) and the Spanish MINECO (Project CTQ2017-87201-P AEI/FEDER, EU) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Nanostructured Cu(II) Coordination Polymer Based on Alanine as a Trifunctional Mimic Enzyme and Efficient Composite in the Detection of Sphingobacteria

  • Maldonado, Noelia
  • Latorre, A.
  • Zamora, F.
  • Somoza, Álvaro
  • Gómez-García, C. J.
  • Bastida, Agatha
  • Amo-Ochoa, Pilar
This research raises the potential use of coordination polymers as new useful materials in two essential research fields, allowing the obtaining of a new multiartificial enzyme with the capacity to inhibit the growth of bacteria resistance. The fine selection of the ligands allows the design of a new 2D coordination polymer (CP), with the formula [Cu2(IBA)2(OH2)4]n·6nH2O, by the combination of Cu (II) as the metal center with a pseudoamino acid (H2IBA = isophthaloyl bis β-alanine). Quantitative total X-ray fluorescence (TXRF) analyses show that the obtained CP can gradually release Cu (II) ions. Additionally, this CP can be nanoprocessed and transformed into a metal-organic gel (MOG) by using different Cu (II) salt concentrations and the application of ultrasounds. Considering its nanometric dimensions, the slow Cu (II) release and its simple processability, its performance as an artificial enzyme, and its antibacterial ability were explored. The results obtained show the first nanocoordination polymer acting as an artificial multienzyme (peroxidase, catalase, and superoxodismutase) exhibiting antibacterial activity in the presence of hydrogen peroxide, with selective behavior for three bacterium strains (S. spiritovirum, A. faecales, and B. cereus). Indeed, this CP shows a more robust inhibition capacity for Sphingobacterium. Going beyond that, as there are no comfortable and practically clinical tests capable of detecting the presence of Sphingobacteria, the compound can be easily embedded to form moldable gelatin that will facilitate the handling and low-cost commercial kits., )is work has been partially supported by the Ministerio de Ciencia e Innovación (MICIIN) under the National Program of Sciences and Technological Materials (PID2019- 106383GB-C44) and the Ministerio de Economía y Com- petitividad de España (MINECO) under the National Program of Materials (EI/10.13039/501100011033; PID2019- 108028GB-C22; PID2019- 110632RB-100) and Biomedicine (PID2020-119352RB-I00), the grant CTQ2017-87201-P funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the Generalidad Valenciana (Prometeo/2019/076). )is work is dedicated to Khaled Hassanein, Javier Conesa Egea and Verónica García
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increased photocatalytic activity and selectivity towards methane of trimetallic NiTiAl-LDH

  • Molina-Muriel, Manuel
  • Peng, Y.
  • García Gómez, Hermenegildo
  • Ribera, Antonio
Layered double hydroxides is a rising family of materials with interesting photocatalytic properties that are starting to be employed on the CO photoreduction to useful chemicals. However, the selectivity control towards high energy value products, such as methane or methanol, is one of the main issues of this process due to the easier formation of CO, which requires fewer electrons to be transferred, and the competition of hydrogen evolution reaction. In this work, a new LDH material containing Ni, Ti and Al within the structure was synthesised with the purpose of increasing the selectivity towards methane production. The material was tested under solar simulator conditions, yielding a methane production of 148 µmol g h, with a selectivity of 86%, one of the highest values reported for this kind of material, while the competition from hydrogen evolution was almost suppressed. The role of Ti directing the selectivity towards methane was confirmed, since no CH was produced when NiAl-LDH catalyst was used instead., We thank the grant CTQ2017-87201-P, Severo Ochoa and RTI2018.98237-B-CO1 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” for financial support. Generalitat Valenciana (Prometeo 2017/083 and Prometeo 2019/076) is also gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Delamination of 2D coordination polymers, the role of solvent and ultrasound

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Hayati, Payam|||0000-0002-9312-3143
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Esrafili, L.
  • Retailleau, Pascal
  • Benmansour Souilamas, Samia|||0000-0002-5482-8554
  • Novio, Fernando|||0000-0002-1517-3612
  • Morsali, Ali|||0000-0002-1828-7287
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Two novel cadmium-based 2D coordination polymers have been synthesized and characterized. Experimental results evidence that the best delamination processes occurs when weak interactions dominate the cohesion between layers and solvent molecules are occluded within the crystalline network. In this case, the delamination of the crystals occurs spontaneously in water. On top of that, and thanks to the high stability of the resulting (flake) colloidal dispersions, we have completed a detailed study of the sonication assisted delamination impact by: I) comparison of two different sonication approaches (bath vs. tip sonication) and II) optimization of final flake morphology and yield by controlling solvent and sonication time. Our results definitely pave the way for the fabrication and implementation of 2D coordination polymers using ultrasound.