Pasar al contenido principal

NEW-GENERATION MICROWAVE PASSIVE COMPONENTS FOR ADVANCED WIRELESS-COMMUNICATIONS/RF-SENSING PLATFORMS

PID2020-116983RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

High-order input-reflectionless quasi-elliptic-type wideband bandpass filter using dual-mode slotline resonator

  • Yang, Li|||0000-0002-1264-4810
  • Psychogiou, Dimitra
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 Asia-Pacific Microwave Conference (APMC), 29 November to 02 December 2022, Yokohama, Japan., A high-order input-reflectionless quasi-elliptic-type wideband bandpass filter (BPF) that exploits a complementary-diplexer-based topology is reported. Firstly, a fourth-order wideband microstrip-to-microstrip vertical transition employing a dual-mode slotline resonator as the reflective-type BPF channel is designed. It features a sharp-rejection BPF response with two close-to-passband transmission zeros (TZs). To attain broadband input-reflectionless behavior, a shunt resistively-terminated microstrip π-shape network is used as the absorptive bandstop-filter (BSF) channel. The RF theoretical operational principle of the conceived broadband BPF is detailed. Compared to prior-art high-order input-/two-port-reflectionless wideband BPFs, the proposed BPF features not only improved passband flatness at the passband edges, but also relatively-high stopband power-attenuation levels and power-absorption ratios. For experimental-validation purposes, a two-layer fourth-order BPF microstrip prototype centered at 1 GHz is developed and tested., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Planar high-order broad-band bandpass filters based on two-stage quadrature couplers and their digital modeling

  • Yang, Li|||0000-0002-1264-4810
  • Martínez Piqueras, Gaspar
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 24th International Microwave and Radar Conference (MIKON), 12-14 September 2022, Gdansk, Poland., Planar two-stage branch-line directional power couplers are applied in this paper to the design of transversalsignal-interference high-order wide-band bandpass filters (BPFs) with very-sharp-rejection characteristics. In comparison with the previously-reported experimental BPF demonstrators of their precursors—i.e., those using transversal filtering sections (TFSs) with one-stage branch-line couplers loaded by longer dissimilar stubs—, an enlarged-bandwidth passband with a higher number of in-band reflection zeros and lower amplitude variation can be obtained. Moreover, multiple transmission zeros (TZs) can be created in the out-of-band region owing to the intrinsic signal-energy cancelation phenomena of the transversal signal-interference philosophy, which result in highselectivity filtering capabilities. As further conceptual understanding of the devised two-stage-coupler signal-interference BPFs, a digital-modeling interpretation for various illustrative synthesis examples is provided. In addition, for experimentalvalidation purposes, single- and two-TFS-based microstrip prototypes of wide-band BPFs centered at 2 GHz are manufactured and characterized. In these circuits, inter-digital-type input/output feeding sections are co-integrated. They allow to extend the lower/upper stopband bandwidths with regard to those inherent to their isolated two-stage-coupler-based TFSs., Agencia Estatal de Investigación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

High-Order Quasi-Elliptic-Type Single-Ended and Balanced Wideband Bandpass Filters Using Microstrip-to-Microstrip Vertical Transitions

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
High-order single-ended and balanced wideband bandpass filters (BPFs) with quasi-elliptic-type (QET) responses are reported. Firstly, a fifth-order wideband BPF based on a two-layer microstrip-to-microstrip vertical transition with two shunt open-circuit-ended two-section microstrip stubs at the input and output ports, respectively, is designed. Compared to a typical third-order vertical transition, two more transmission poles (TPs) along with a pair of close-to-passband transmission zeros (TZs) are attained. Next, an application to design a ninth-order QET balanced wideband BPF using a vertical transition is carried out. Owing to the used slotline resonator, an intrinsic common-mode (CM) suppression capability is obtained for it. The RF operational and design principles of these BPF devices are detailed by means of their relevant transmission-line-(TL)-based equivalent circuits. For experimental-validation purposes, two microstrip prototypes corresponding to a 3-GHz fifth-order wideband BPF and a 2-GHz ninth-order balanced wideband BPF are developed and tested. The measured single-ended and balanced BPF circuits feature sharp-rejection QET responses with two close-to-passband TZs and stopband-power-attenuation levels above 27.3 dB and 43.66 dB, respectively. The measured CM suppression levels for the balanced BPF device are higher than 34.59 dB from DC to 5 GHz., Spanish Ministry of Economy, Industry, and Competitiveness
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Digital-filter-based flat-group-delay RF analog circuits: application to Dolph-Chebyshev windows

  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Malki, Mohamed
  • Gómez García, Roberto|||0000-0001-9132-6927
  • Yang, Li|||0000-0002-1264-4810
The direct synthesis of a family of digital-filter-based RF analog circuits with transmission zeros (TZs) and constant-group-delay behavior is reported. The adopted RF circuit consists of a transversal filtering network composed of transmission-line segments that are connected through a multi-way power divider and combiner at its input and output terminals, respectively. The synthesis procedure starts by obtaining the coefficients of a finite-impulse-response (FIR) digital filter of interest and finalizes with the determination of the electrical parameters of the RF circuit. In particular, designs corresponding to Dolph-Chebyshev windows are addressed in this brief. For experimental-demonstration purposes, two 5-GHz proof-of-concept microstrip prototypes of a symmetrical-quasi-reflectionless bandpass filter (BPF) with Dolph-Chebyshev-type response and the in-series cascade connection of two replicas of it are designed, manufactured, and tested., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Input-absorptive high-order wideband balun bandpass filters with quasi-elliptic-type response

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 52th European Microwave Conference (EuMC), 27-29 September 2022, Milan, Italy., A class of input-reflectionless high-order wideband balun bandpass filters (BPFs) with quasi-elliptic-type response are reported. They consist of two main circuit parts: 1) a three-port reflective-type high-order balun BPF network and 2) a resistivelyterminated microstrip T-junction that is shunt connected at the unbalanced port. The reflective-type balun BPFs developed with 5th- and 6th-order Chebyshev equal-ripple responses are firstly described. By replacing the last two virtually-short-circuit-ended quarter-wavelength transmission-line (TL) stubs with opencircuit-ended half-wavelength TL stubs, their balun counterparts with two close-to-passband transmission zeros (TZs) are then presented. As design example, a 5th-order input-reflectionless quasi-elliptic-type wideband balun BPF is theoretically discussed. Furthermore, for experimental-validation purposes, a proof-ofconcept two-layer microstrip prototype of 5th-order balun BPF is simulated and tested. Its measured metrics are 2.05-GHz center frequency, 3-dB fractional bandwidth of 63.61% for the two output ports, input-power-matching levels higher than 10 dB, and stopband-power-rejection levels above 26.1 dB from DC to 5 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Single-Ended and Balanced Flat-Group-Delay RF Low-Pass Filters With Input-Quasi-Reflectionless Behavior for Digital-Communication Systems

  • Luo, Zekai
  • Yang, Li|||0000-0002-1264-4810
  • Su, Tao
  • Gómez García, Roberto|||0000-0001-9132-6927
A class of RF low-pass filters (LPFs) simultaneously featuring flat-in-band-group-delay and input-quasi-reflectionless characteristics is reported for the first time. By means of a multilayered complementary-diplexer-based topology, a single-ended input-quasi-reflectionless LPF with in-band quasi-flat group-delay response and multiple out-of-band transmission zeros (TZs) is first conceived. It consists of the combination of single-pole LPF units with resistively terminated microstrip-to-microstrip vertical slotline transitions (MS-to-MS VSTs). Subsequently, intrinsic common-mode-(CM)-signal suppression for its balanced counterpart is realized through in-series cascading two single-ended LPF stages with a coplanar stripline (CPS) section. As a result, a balanced LPF possessing differential-mode (DM) in-band quasi-constant group-delay response, DM input-quasi-absorptive behavior, and intrinsic CM suppression is obtained. Furthermore, to increase DM selectivity and out-of-band attenuation levels along with CM suppression levels, a higher rejection balanced LPF composed of multiple cascaded single-ended LPF units and CPS sections is also devised. The RF operating principles of the engineered single-ended and balanced LPF circuits are detailed. Three demonstrative prototypes-i.e., one single-ended and two balanced LPF circuits-are manufactured and characterized for practical validation purposes. For the higher rejection balanced LPF prototype, eye-diagram tests are also carried out to verify the quality/integrity of the transmitted DM signal in the time domain., Ministerio de Economía, Industria y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Flat-group-delay RF planar filters with transmission zeros using transversal circuits

  • Gómez García, Roberto|||0000-0001-9132-6927
  • Yang, Li|||0000-0002-1264-4810
  • Malki, Mohamed
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
Various families of flat-in-band-group-delay RF planar bandpass filters (BPFs) with multiple out-of-band transmission zeros (TZs) in their filtering transfer function are presented. As the first approach, a type of BPFs with theoretically-constant group-delay profile and perfect two-port-reflectionless behavior is proposed. The theoretical sufficient conditions to obtain a frequency-constant group delay in a generalized form of transfer function for these BPFs are derived. They are then particularized in transmission-line-based transversal-circuit realizations with flat-in-band-group-delay and quasi-reflectionless characteristics. Afterwards, a class of reflective-type BPFs based on directional power couplers that are arranged in transversal-mode topologies are addressed toward its practical demonstration for the first time. These BPFs, which exhibit flat in-band group delay, are compared with their classic Bessel-type BPF counterparts without TZs. Moreover, discrete-time models of such BPFs are derived, analyzed, and discussed. For experimental-validation purposes, proof-of-concept microstrip prototypes centered at 2.5-GHz of the engineered quasi-absorptive/reflective-type flat-in-band-group-delay BPFs are designed, manufactured, and characterized., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Balanced quasi-elliptic-type dual-passband filters using planar transversal coupled-line sections and their digital modeling

  • Yang, Li|||0000-0002-1264-4810
  • Malki, Mohamed
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
A class of balanced dual-band bandpass filters (BPFs) with planar transversal-signal-interference coupled-line sections is reported. In their building balanced dual-band BPF stage under differential-mode excitation, a second-order quasi-elliptic-type dual-band bandpass filtering transfer function is obtained. Specifically, from the transversal interaction among their two open-ended and virtually-short-ended half-wavelength coupled-line paths, sharp-rejection differential-mode dual passbands with several out-of-band transmission zeros at both sides are realized. To attain high common-mode suppression levels within the differential-mode passbands, two open-ended line segments are connected at the symmetry plane of the devised balanced dual-band BPF stage. Moreover, higher-order schemes based on in-series-cascaded multi-stage designs to further increase differential-mode selectivity and in-band common-mode rejection are illustrated. The operational principles and parametric-analysis design rules of the engineered transversal-coupled-line-based balanced dual-band BPF approach are detailed. Additionally, for a rigorous interpretation of their zero/pole characteristics, a digital-modeling framework is applied to them to connect RF balanced filters with their discrete-time versions. For practical-validation purposes, a microstrip prototype of two-stage/fourth-order balanced dual-band BPF is built and tested. It exhibits measured differential-mode dual passbands with center frequencies of 1.464 GHz and 2.294 GHz, 3-dB fractional bandwidths of 8.74% and 9.68%, and in-band common-mode rejection levels above 23.16 dB and 31.36 dB, respectively., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

All-frequency-two-port-quasi-absorptive planar bandpass filter with quasi-flat group delay and multi-transmission-zero extended stopbands

  • Malki, Mohamed
  • Yang, Li|||0000-0002-1264-4810
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
A microwave planar bandpass filter (BPF) with in-band-quasi-flat-group-delay characteristics and two-port-quasi-reflectionless behavior for an infinite spectral range is presented. It is composed of the in-series cascade connection of three multipath-delay-line transversal filtering sections (TFSs) with Wilkinson-type power-division/combination stages. In this manner, by means of the composite action of these TFSs, an in-band-quasi-Bessel-type bandpass filtering response with multi-transmission-zero (TZ) stopbands and two-port-quasi-absorptive nature for a finite frequency interval is attained. To further extend such quasi-reflectionless bandwidth from dc to infinite theoretically, as well as the stopband range, one-port-quasi-absorptive wide-band filtering cells are inserted at both the input and output accesses of the overall quasi-flat-group-delay BPF. For experimental demonstration purposes, a microstrip prototype centered at 5 GHz is designed, manufactured, and characterized., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Multilayered input-reflectionless quasi-elliptic-type wideband bandpass filtering devices on diplexer-based structures

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
  • Fan, Maoyu
  • Zhang, Runqi
This article is an expanded version from the 2020 Asia-Pacific Microwave Conference (APMC2020), Hong Kong, Dec. 8–11, 2020 [DOI: 10.1109/APMC47863.2020.9331419]. (Corresponding authors: Li Yang; Roberto Gómez-García.), Classes of input-reflectionless wideband bandpass filters (BPFs) and balun BPF with quasi-elliptic-type (QET) responses are reported. They consist of two signal-transmission parts in multilayered diplexer-based topologies, as follows: 1) a BPF channel shaped by a two-/three-port reflective-type BPF/balun on a microstrip-to-microstrip vertical transition and 2) an input-absorptive bandstop filter (BSF) channel built with a shunt resistively terminated lowpass filter (LPF) that is composed of hybrid microstrip sections and open-circuit-ended microstrip stubs. Two real-frequency out-of-band transmission zeros (TZs) are generated in these RF filtering devices using a cascaded short-circuit-ended two-section microstrip line and two shunt open-circuit-ended half-wavelength microstrip lines, respectively. Using a higher order LPF network, enhanced passband amplitude flatness and improved stopband power absorption ratio levels for the devised BPFs are attained. As design examples, two third-order BPFs with a shunt resistively terminated microstrip T-junction and a $\pi $ -shape structure, respectively, are first provided. Afterward, a higher order BPF based on two cascaded replicas of a third-order BPF unit is designed to show highly increased stopband power attenuation levels and enhanced power absorption ratio profile within the stopband-to-passband transitions. Subsequently, their application to an input-absorptive QET fourth-order wideband balun BPF is presented. The operational principles of these BPFs and balun are detailed by the developed design procedures, in which their associated impedance-type design parameters are synthetically determined. As practical validation, four microstrip prototypes corresponding to three 2-GHz wideband BPFs and one 1-GHz broadband balun BPF are manufactured and tested. These input-reflectionless wideband filtering components experimentally feature the desired merits in terms of QET responses, enhanced passband amplitude flatness, and improved stopband power absorption ratio levels., Agencia Estatal de Investigación, European Comission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Multilayer microstrip closely-spaced-channel wideband diplexer with highly-selective fourth-order filtering responses

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
A type of multilayer microstrip diplexer with highlyselectivewidebandfiltering channels is reported. Its closely-spaced fourth-order passbands are attributed to two circuit parts: (i) two third-order quasi-elliptic-type microstrip-to-microstrip wideband vertical transitions and (ii) a shunt two-stub dual-band bandpass filter (BPF) junction printed on the top layer. The two microstrip vertical transitions are developed by means of open-/short-circuitended microstrip lines and slotline stepped-impedance resonators (SIRs), respectively, and they correspond to the constituent lower and upper channels. The shunt dual-band BPF junction produces one additional transmission pole and one more pair of close-topassband transmission zeros (TZs) for each channel to further increase their filtering selectivity. The RF theoretical foundations and design procedure of the engineered broadband diplexer are detailed. For practical-validation purposes, a proof-of-concept prototype of two-layer fourth-order microstrip wideband diplexer is simulated, manufactured, and tested. Its measured lower and upper channels has two closely-spaced sharp-rejection passbands with center frequencies of 1.496 GHz and 2.759 GHz and 3-dB fractional bandwidths of 62.83% and 24.83%, respectively, while featuring power-isolation levels above 27.39 dB from 0.5 to 4 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Multilayered balanced wideband bandpass filter with high filtering selectivity

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy., A type of multilayered balanced wideband bandpass filter (BPF) with high filtering selectivity is presented. It is composed of two back-to-back cascaded microstrip-tomicrostrip vertical transitions using slotline stepped-impedance resonators (SIRs). Under differential-mode excitation, a sharprejection fifth-order wideband filtering transfer function with two paired close-to-passband transmission zeros can be attained in the proposed balanced BPF. Moreover, high common-mode suppression levels within the differential-mode passband range are achieved. For experimental-demonstration purposes, a microstrip prototype of the devised balanced wideband BPF architecture is developed and tested. It exhibits a measured differential-mode fifth-order high-selectivity wideband filtering response with center frequency of 4.015 GHz, 3-dB fractional bandwidth of 38.06%, and minimum in-band power-insertionloss level of 0.947 dB. The common-mode suppression levels are above 20 dB from 2.075 to 5.588 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Two-layered microstrip diplexer based on high-selectivity wideband bandpass filters

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 IEEE Radio and Wireless Symposium (RWS), 16-19 Jan. 2022, Las Vegas, NV, USA., This paper presents a microstrip diplexer based on two high-selectivity wideband bandpass filters (BPFs) in a twolayered structure. Both the lower and upper channels are designed with third-order microstrip-to-microstrip vertical transitions using open-circuit-ended slotline stepped-impedance resonators (SIRs). Specifically, open-circuit-ended microstrip lines on the top and bottom layers for the lower channel are employed, whereas the upper channel is equipped with short-circuit-ended ones. Thus, owing to the slotline SIRs, two close-to-passband transmission zeros (TZs) leading to sharp-rejection capabilities for both BPF channels are attained. The theoretical foundations and RF operating principles of the devised diplexer are discussed in detail. For practical-validation purposes, a two-layered microstrip wideband diplexer prototype is designed, simulated, and tested. It features two three-pole high-selectivity filtering responses for the measured lower and upper channels that are centered at 1.52 GHz and 2.76 GHz, and exhibit 3-dB fractional bandwidths of 60% and 24.93%, respectively., European Commission, Agencia Estatal de Investigación